Finalize the screenshot review system after the first Linux re-baseline
(that run showed 355/356 stable — the placeholder floor is fine as-is):
- ENFORCE the gate: `screenshots:check --fail-on-change` now fails the build on any
changed/added/removed vs baselines (it still posts the drift report first, so the
failure is actionable; a real render change → re-promote). The generic "CI failed"
notice is suppressed for gate failures so we don't double-post on drift.
- Exclude retinascale-01-loaded: a fullPage HiDPI test whose captured height + DPR
scaling vary run-to-run (~60% inter-run diff) — a flaky test, not render noise.
IGNORE_SCREENSHOTS in config.ts; compare/promote/gen-manifest skip it; baseline removed.
- Kill the baseline-dir shadowing: drop e2e/baseline-screenshots/ from BASELINE_DIRS +
delete its 3 files (grid-tab-final, wxgrid-controls, wxgrid-dedicated-page) that
duplicated names in baseline-screenshots/ with different bytes.
- Prune 12 stale baselines (renamed/removed specs: wizard-01..04, gerbview-wizard-01..04,
zoom-pl_editor-*, popup-03-palette).
- Delete the dead compare-screenshots.sh / update-baseline-screenshots.sh.
- Regenerate screenshot-manifest.json (355 entries).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the legacy Emscripten JS-exceptions model with native wasm-EH (legacy
encoding) across the whole build, keeping Asyncify coroutines working via a
from-source Binaryen --hoist-cpp-catches pre-pass. Net result: native-EH is the
only build mode, the 3D viewer is on by default, and pcbnew shrinks substantially.
Highlights:
- Binaryen submodule everywhere + --hoist-cpp-catches integration in apply-asyncify;
post-link Asyncify covers every app wasm (not just standalone test wasm).
- Build deps (incl. OpenCASCADE without OCC_CONVERT_SIGNALS) and all KiCad apps
with -fwasm-exceptions; emscripten_sleep added to the post-link asyncify-imports.
- libcontext fiber entry wired under native exceptions; while-loop main loop +
currData shim injected into all wx apps.
- Native-EH collab apply fixed: DEBUG-define the embind TU + match all out-of-CMake
C++ TUs' ABI flags to the core, fixing the vtable-layout skew / mis-dispatch.
- 3D viewer enabled by default (real raytracer linked, not the stub).
- Retire the EH-spike scaffolding; flip the asyncify-races ablation pins to
shim-redundancy pins (native-EH stays clean with the legacy shims ablated).
- Fix the asyncify-races quiescence check to not require Asyncify.currData==0:
under the native-EH per-frame-yield top loop the main stack is asyncify-suspended
every frame, so currData legitimately churns (a freed-but-not-yet-nulled buffer,
not a leak). Refresh the pcbnew toolbar screenshot baseline for the new kicad.
- CI: drop the obsolete binaryen_version input/env (the build uses the binaryen
submodule fork's wasm-opt, not a version download); key the wasm-output cache on
the binaryen submodule SHA instead.
Bumps the wxwidgets + binaryen submodules to their squashed feature commits.
Validated green: all 7 apps native-EH (real 3D in pcbnew); KiCad e2e 63/63
Firefox + Chromium (3D viewer renders); wx 336; coroutine 34/34 both engines;
asyncify 7/7 both engines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bump wxwidgets to the %p->%zu radio-group name fix and add a standalone
wxWidgets harness plus an e2e regression that asserts three radio groups
in one window select independently. Build artifacts are gitignored; only
radiogroups_test.cpp is tracked.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Standalone wx test apps (contextmenu, scrollbar) + e2e specs proving the
wxScrollBar control, the wxScrolledWindow gutter, and DoPopupMenu.
- KiCad in-app specs: pl_editor + pcbnew canvas right-click context menus and
scrolled-panel scrollbar gutters, with baseline screenshots.
- build-wx-wasm.sh: serial -j1 fallback when the parallel build trips the
intermittent clean-build race (a generated header read mid-rewrite by
concurrent compiles; never happens at -j1). Recovery resumes from built
objects; a genuine error still fails the serial pass.
- Bump wxwidgets submodule (context menus + draggable scrollbars).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bump wxwidgets (8814ddb) for the two DOM-port fixes and add their reproductions:
- tests/apps/standalone/{textctrl-reentry,tooltip-lifetime}: standalone wx repro
apps + Makefile.wasm targets (textctrl links -fexceptions to throw from a
wxEVT_TEXT handler), driven by tests/e2e/dom-port-bugs.spec.ts. Each app is
deterministic and self-contained (no UB, ASAN, or timing dependence).
- docs/features/wx-dom-port/branch-review.md: branch review with findings #2/#3
marked fixed and a "Bug reproductions and fixes" section, including the
asyncify + legacy-EH gotcha (catch/destructor landing pads are unreliable
while unwinding through asyncify frames).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The canvas (wxUniversal) mode is gone (wxwidgets submodule); remove every
piece of side-by-side plumbing so there is exactly one build and one test
flow:
- scripts/build-wxuniversal-wasm.sh -> scripts/build-wx-wasm.sh; no
--dom/--enable-universal; builds into build-wasm/wxwidgets
- build-wasm-test.sh: no DOM_BUILD / apps-dom rsync mirror / PORT=dom;
apps build straight into tests/apps (Makefile.wasm PORT conditionals
collapsed; wx.js + wx-dom.js always pre-js)
- docker/build.sh, build-kicad-target.sh, env.sh: WX_PORT / -dom /
-universal suffixes removed; kicad builds to kicad-<app>, outputs to
output/; wx.js/wx-dom.js copied from the real source path
(/workspace/wxwidgets/build/wasm — the old build-wasm path never
existed and silently failed)
- setup-kicad-wasm.sh: single target dir; the perl wx-dom.js injection is
gone — the 7 checked-in kicad pages now reference wx-dom.js directly
- playwright configs serve apps/; fixtures drop the test-results/dom and
logs/wxwidgets/dom namespacing; boot.spec asserts wxDomPort
unconditionally; pcbnew.spec uses one reference image;
appearance.spec assertions unconditional
- compare/update-baseline-screenshots.sh: --port removed
- tests/gal-regression/wasm/Makefile: links build-wasm/wxwidgets and
carries wx-dom.js as a second pre-js — the gal-webgl suite (30 specs)
now actually builds and runs here (it needed host-side boost+glm via
scripts/deps; the bundle had been missing, timing the whole spec out)
- tests: clickCanvas() dispatches via page.mouse (DOM widgets
legitimately cover the canvas; locator actionability refused the
click); the comprehensive spec drives wxChoice through its native
<select> (browser-owned popup cannot be coordinate-clicked)
- docs: README/CLAUDE.md/build.md script names and dirs;
features/wx-dom-port README reframed (DOM is THE port), visual-notes
bugs 26-28; FindwxWidgets.cmake config label drops 'wasmuniv'
- wxwidgets submodule -> 9dbacc9448 (DOM-only port, fork diff shrunk)
Gate: full wx e2e suite 292 passed / 1 skipped / 0 failed — first run
ever with the gal-webgl specs green (28 scenarios + load + sequential).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Build/test plumbing for the second wxWidgets mode: --dom on
build-wxuniversal-wasm.sh (build-wasm/wxwidgets-dom, no universal,
--disable-tooltips, libwx_wasmu_* stubs) and build-wasm-test.sh
(mirrors sources into tests/apps-dom, PORT=dom). Build script now
reconfigures when Makefile.in or autoconf_inc.m4 regenerate (bakefile
chain). Harness: WX_PORT=dom serves apps-dom, namespaces screenshots
into test-results/dom and logs into logs/wxwidgets/dom; compare/update
screenshot scripts take --port dom with baseline-screenshots-dom.
New port-agnostic boot.spec.ts (green on both ports).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Suite went 64 failed → 291 passed / 0 failed:
- Makefile.wasm: compile with -MMD -MP and include .d files — stale objects
relinked against a newer wx lib crashed apps at startup with "function
signature mismatch" after any header/vtable change
- playwright(.coroutine).config.ts: pin the server port for the whole run
(resolvePort from playwright-kicad.config.ts); the 60s freshness window made
workers restarted after a failure rotate to a dead port (ERR_CONNECTION_REFUSED
cascade across ~50 tests)
- drop legacy-GL testing: KiCad renders via WebGL GAL (gal-webgl.spec.ts);
remove minimal_test's OpenGL tab/GLTestCanvas, opengl.spec.ts, GL z-order
describes, -sLEGACY_GL_EMULATION + gl_immediate_shim.js from the test build,
and the orphaned GL baselines
- coroutine-pthread repro apps join the `all` target (make clean used to delete
them while all never rebuilt them); clean no longer eats checked-in JS like
worker_dom_stub.js
- bump wxwidgets: guard module-eval document access so wx+pthread apps
(threadpool tests) survive Web Worker eval
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Brings up KiCad's pagelayout_editor (drawing-sheet editor) in the
browser, to roughly the same "boots, canvas visible, partially usable
in-session" level as the existing pcbnew/eeschema/calculator ports.
Build:
- docker/build.sh: add pl_editor to the unified app dispatch (case,
subdir map, all-loop).
- scripts/kicad/build-kicad-target.sh: add pl_editor to the case;
upstream target name pl_editor under source subdir pagelayout_editor.
- scripts/kicad/build-pl_editor.sh: 7-line thin wrapper matching the
pcbnew/eeschema/calculator pattern.
- tests/scripts/setup-kicad-wasm.sh: copy_app pl_editor.
App glue:
- wasm/stubs/nl_pl_editor_plugin_stub.cpp: no-op SpaceMouse plugin so
pl_editor_frame.cpp's NL_PL_EDITOR_PLUGIN symbols resolve. Mirrors
nl_pcbnew_plugin_stub.cpp.
- tests/apps/kicad/pl_editor.html: browser shell. preRun creates
/home/kicad and FS.chdir there so file dialogs land somewhere
friendly instead of MEMFS root (/dev/, /proc/, etc.).
E2E coverage:
- tests/kicad/pl_editor.spec.ts: 5 tests — smoke (canvas, no abort),
wizard, File menu has Open/Save As, file-dialog folder-navigation
regression, canvas + toolbar metrics.
- tests/e2e/filedialog-folder-nav.spec.ts: wxWidgets-level twin of
the regression test (exercises the underlying widget directly via
the standalone filedialog_test app).
Submodule bumps:
- kicad → feature/pl-editor (WASM gating in pagelayout_editor's
CMakeLists + navlib stub).
- wxwidgets → feature/pl-editor (wxGenericFileDialog::OnOk navigates
into selected directories; wasm/mouse.cpp emits wxEVT_LEFT_DCLICK
via timestamp-based double-click detection — the latter benefits
every wxWidgets-WASM app).
See features/pl-editor/ for the design doc + per-repo diff patches.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- build-pcbnew.sh: add --diag=<gal,coroutine,ctor,all> -> -DKICAD_DIAG_*,
off by default (forwarded by docker/build.sh)
- diagnostics.js: emit at console.log level (no longer error/warn); still
gated by SHIM_DIAGNOSTICS=1
- apply-asyncify.sh: exclude PCB_EDIT_FRAME::setupUIConditions() from
asyncify instrumentation (V8 cannot run the instrumented huge function
on the rewound ctor stack -> Chrome startup stall; Firefox unaffected)
- DEBUG.md: reusable WASM/asyncify/browser debugging guide, diagnostic
flag docs, and a production-build (release + -O2 asyncify) recipe
- tests: standalone coroutine vcall/gl repro probes
- bump kicad + wxwidgets submodules (diagnostic gating / debug cleanup)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Investigation scaffolding for the Chrome-only KiCad coroutine renderer crash.
Adds isolated reproduction probes exercising the coroutine/Asyncify/fiber layer
under KiCad-like conditions, runnable in BOTH Firefox and system Chrome.
- tests/playwright-coroutine.config.ts + test:coroutine:firefox|chrome npm
scripts: run the coroutine specs in Firefox AND system Chrome (the old e2e
config only used bundled Chromium, which never reproduced the crash).
- tests/apps/standalone/coroutine-pthread/: no-wx + pthreads reproduction probes
(fiber-in-main, nested invoke_/dynCall boundaries, RunMainStack, embind,
main-loop/rAF activation) + worker_dom_stub.js for wx+pthreads builds.
- tests/apps/Makefile.wasm: coroutine-pthread{,-main,-nested,-nested-ex,-wx,
-embind,-mainloop} targets.
- scripts/common/shims/diagnostics.js: add EM_ASYNC_JS handleSleep enter/wake
tracking (DIAG_SLEEP) to detect nested-async at the crash.
Findings (details in research notes): every isolated factor so far — direct /
nested / RunMainStack fiber, wx event loop + all 13 scenarios incl EM_ASYNC_JS,
pthreads, and main-loop/rAF activation — runs CLEAN in system Chrome. The
coroutine/Asyncify layer is exonerated; GL/WebGL is the remaining untested factor
(next). The reliable FF-pass/Chrome-fail repro is still the KiCad pcbnew e2e.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Main-repo side of a multi-part WIP covering the KiCad WASM tool-selection
and nested-Asyncify work. Submodule commits are in kicad@f6e9239aaa
(libcontext hygiene) and wxwidgets@bb80f91e8b (auibar registration +
dialog diagnostics).
## scripts/common/inject-dyncall-shims.sh
Wrap Asyncify.handleSleep / allocateData to save-and-restore Asyncify.currData
around each EM_ASYNC_JS sleep. This fixes the nested Asyncify collision where
a fiber swap that fired during a modal's event loop clobbered currData, and
the modal's later doRewind used the fiber's buffer and hit "RuntimeError:
index out of bounds". Root cause documented as Emscripten Issue #9153
(wontfix upstream).
Diagnostic-rewind logging (forcedBottomOfCallStack, callStack traces) is
retained to help future debugging of Asyncify state corruption.
## tests/
- tests/playwright-kicad.config.ts: add `channel: 'chrome'` for the
chromium project so --project=chromium --headed uses system Chrome
(real GPU) instead of SwiftShader on ARM Mac. Also switch trace to
retain-on-failure + screenshot on-failure for easier E2E debugging.
- tests/kicad/pcbnew.spec.ts: replace `tool.checked` assertions with a
label-suffix check (`[checked]`) since our auibar registration encodes
checked state in the label (no schema change to the registry).
- tests/apps/Makefile.wasm: add `coroutine-nested` build target + include
it in the all: list.
- tests/apps/standalone/coroutine/: kicad_coroutine_harness.h + test app
reproducing KiCad COROUTINE semantics against real libcontext.
- tests/apps/standalone/coroutine-nested/: nested_test.cpp reproduces the
EM_ASYNC_JS-modal + fiber-swap nesting bug in isolation. 8 scenarios
from baseline_modal_alone through nested_fibers_inside_modal.
- tests/e2e/coroutine.spec.ts + coroutine-nested.spec.ts: Playwright specs
that load the standalone apps and assert all case cases pass via
[COROUTINE_TEST] SUMMARY log parsing.
## research/ and features/browser-tools/
Three background docs capturing the investigation trajectory:
- features/browser-tools/0001-kicad-wasm-tool-activation-investigation.md
Early investigation: why tools don't activate; initial dynCall-empty-
callback hypothesis.
- features/browser-tools/0002-wasm-coroutine-deep-dive.md
Deep dive on Asyncify internals, fiber API, QEMU's coroutine-wasm
reference implementation.
- features/browser-tools/0003-wxauitoolbar-registration-fix.md
The narrow fix: why wxAuiToolBar needs a registration block, where to
add it, what the fallback plan is.
- research/threading_1.md: corrected root-cause analysis after reading
runtime logs — nested-Asyncify currData collision, Emscripten #9153.
- research/threading_2.md: extended research on alternative approaches
(JSPI/WasmFX/state-machines) and why they don't help here.
## Submodule pointer updates
kicad: f6e9239aaa (wip: libcontext WASM hygiene cleanup)
wxwidgets: bb80f91e8b (wip: wxAuiToolBar element-registry registration +
dialog diagnostics)
## Open threads not yet in scope
- Firefox/Chrome divergent behavior: "indirect call signature mismatch"
traps in Firefox vs renderer crash in system Chrome (tracked in
plans/peaceful-hugging-pnueli.md and the research docs).
- E2E pixel-diff for Draw Lines fails because the test's diff region does
not cover where the line is actually drawn; tool activation works, the
line is visible in test-results/pcbnew-draw-lines-02-after-drawing.png.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
1. Fix gal-webgl.spec.ts sequential test:
- Wait for isReady() not just module existence
- Use .gl-canvas selector (same as individual tests)
- Increase timeout from 50ms to 100ms
- This fixes blank screenshots in full test runs
2. Fix test-gal-regression.sh comparison:
- Normalize PNG format before comparing (flatten + sRGB TrueColor)
- This handles RGBA vs RGB and palette differences
- gal-basic-lines now passes comparison (0.34% different)
Results after fixes:
- Native vs Baseline: PASSED (28/28)
- WebGL screenshots now capture actual rendered content
- gal-basic-lines matches native (first successful scenario!)
- Other scenarios have rendering differences to investigate
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update wasm/Makefile to compile ALL scenario files using wildcard
- Add conditional compilation to scenario_bitmap.cpp (#ifdef __EMSCRIPTEN__)
to handle OpenGL-specific shader workaround code for native only
- Change canvas dimensions to 1600x1200 to match native baseline (2x Retina)
- Set white background color to match native screenshots
- Update gal-webgl.spec.ts to hide UI overlay before taking screenshots
- Improve test-gal-regression.sh with better ImageMagick comparison
All 28 scenarios now compile and run on both native and WebGL backends.
Native vs baseline: PASSED (28/28 matching)
WebGL rendering: In progress (primitives not yet visible)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix coordinate system for 1:1 pixel mapping (was using nm scale)
- Set worldUnitLength to 1/96 to match native test setup
- Add SetLookAtPoint and SetZoomFactor for proper view transformation
- Fix glDrawBuffers for WebGL 2.0 (array index must match attachment)
- Add legacy_gl_stubs.js for wxWidgets compatibility
- Add isReady() check to prevent race condition in Playwright tests
All 28 GAL test scenarios now render correctly in WebGL.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add wasm_stubs.cpp with WASM-specific stub implementations for
COLOR4D::BLACK/WHITE, GLU tesselator, PGM_BASE, and other KiCad
dependencies
- Update Makefile to include KiCad sources (GAL base class, display
options, HiDPI canvas) and test scenarios
- Fix kiglew.h to define GLEW guard (__glew_h__) preventing conflicts
with Emscripten's GLEW header
- Update test HTML to create canvas before module load (MODULARIZE
requires passing canvas in Module config, not preRun)
- Update Playwright tests to find canvas elements correctly
- Add #window-container for wxWidgets GL canvas support
Build produces 8.4MB WASM with full WEBGL_GAL implementation.
Tests pass but rendering still shows dark output (debugging in progress).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add complete test infrastructure for WebGL GAL visual regression testing:
- scripts/test-gal-regression.sh: Master script that builds both backends,
runs tests, and performs two-level comparison (native vs baseline,
webgl vs native)
- scripts/build-gal-webgl-test.sh: WASM build using Makefile with em++
- tests/gal-regression/wasm/: WebGL test harness (stub WEBGL_GAL)
- tests/e2e/gal-webgl.spec.ts: Playwright test for screenshot capture
Fix Homebrew Emscripten environment in scripts/common/env.sh:
- Set EMSDK_PYTHON for Python 3.10+ (em++ reads this, not $PYTHON)
- Add bundled LLVM to PATH (Emscripten needs its clang with WASM backend)
Verified: Native vs Baseline passes (28/28), WebGL generates blank
screenshots as expected (WEBGL_GAL implementation is Phase 2).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace test.skip() with proper expect() assertions when app fails to load
- Remove button-finder utility (no longer needed with element registry)
- Remove kicad tests (tested separately)
- Add findByName/clickByName helpers for bitmap buttons
- Fix element lookups: use clickByName for bitmap buttons, clickTreeItem
for treebook pages, selectComboItem for wxChoice items
- Add SetName() to shape buttons in bitmapbuttons_test.cpp
- Remove verbose logging from print and threadpool tests
- Update README to reflect current test infrastructure
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Update tests to use semantic identifiers instead of hardcoded pixel positions:
- toolbar.spec.ts: Use clickToolbarTool('New') instead of click(box.x + 30, box.y + 45)
- menu.spec.ts: Use clickMenuBarItem('File') instead of click(box.x + 30, box.y + 15)
- layout.spec.ts: Use getSplitterSash() to get actual sash position for drag operations
- aui.spec.ts: Use clickAuiButton('close', 'Properties') for panel button clicks
Also extends element-tracker.ts with:
- WxRenderedElement interface for toolbar tools, menu items, sashes, AUI parts
- findRenderedByLabel(), findRenderedByType() query functions
- clickToolbarTool(), clickMenuBarItem(), getSplitterSash(), clickAuiButton() helpers
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace hardcoded pixel coordinates with semantic element lookups in tests.
The element registry (added to wxWidgets) tracks all wxWindow instances,
enabling tests to find buttons by label text instead of pixel positions.
Changes:
- Add element-tracker.ts with clickByLabel, findByLabel, findByType, etc.
- Migrate clipboard, dialog, timer, filedialog, logerror tests to use registry
- Update fixtures.ts to export element-tracker utilities
- Update README with element registry documentation
- Update wxwidgets submodule with registry implementation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Cast Element to HTMLElement for style property access.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- wxWidgets logs: tests/logs/wxwidgets/<test-file>/
- KiCad logs: tests/logs/kicad/<test-file>/
- Global setup now cleans all log subdirectories recursively
- Added globalSetup to KiCad playwright config
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Create standalone test that reproduces KiCad's wxLogError dialog with
Details dropdown. The test verifies wxLogWasm outputs messages to browser
console with [wxLog][LEVEL] prefix.
- Add tests/wasm-app/standalone/logerror/logerror_test.cpp
- Add tests/e2e/logerror.spec.ts with 4 test cases
- Update wxwidgets submodule with wxLogWasm implementation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The KiCad WASM build was freezing during initialization due to a pthread
deadlock. When hardware_concurrency() > PTHREAD_POOL_SIZE, new Web Worker
creation requires the event loop, but the main thread busy-waits blocking it.
Changes:
- Use navigator.hardwareConcurrency for PTHREAD_POOL_SIZE in KiCad build
- Add threadpool test to reproduce and verify the fix
- Add single-target build support to build-wasm-test.sh
- Default docker/build.sh to -j 10 for faster builds
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Test infrastructure to verify window sizing works correctly
when GetClientSize() is called before the window is shown.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add source hashing to stamp system (functions.sh) for detecting
when dependencies need rebuild based on source file changes
- Update build-pcbnew.sh to use source stamps for wxWidgets
- Add global-setup.ts to clean logs before test runs
- Add maximize_test standalone test to verify wxFrame::Maximize()
works correctly in WASM (it does - window is 1280x720)
- Update Makefile.wasm with maximize test build rules
The maximize_test proves wxWidgets display detection works fine.
KiCad's 20x20 window bug is KiCad-specific, not a wxWidgets issue.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add pcbnew-load.spec.ts: Tests for WASM runtime initialization
- Add pcbnew.html: Test harness for loading KiCad in browser
- Add setup-kicad-wasm.sh: Script to copy WASM from Docker build
- Add serve.json: COOP/COEP headers for SharedArrayBuffer support
- Update package.json: Add npm run test:kicad and setup:kicad scripts
- Update .gitignore: Exclude generated WASM/JS files from kicad/
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New test apps and E2E tests:
- fontenum: Font enumeration via Local Font Access API (180 fonts)
- textdecor: Text underline/strikethrough decorations
- bitmask: wxMask bitmap transparency with color keys
- regions: Non-rectangular region clipping (union, subtract, complex shapes)
Updates:
- playwright.config.ts: Add local-fonts permission
- WHATWORKS.md: Document implemented features, update test counts
- Makefile.wasm: Add build targets for new test apps
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
KiCad uses OpenGL GAL directly via WebGL, completely bypassing
wxGraphicsContext. The graphicsctx test app was crashing because
GetDefaultRenderer() returns NULL when wxUSE_CAIRO=0.
Since KiCad's rendering doesn't use wxGraphicsContext, this test
is unnecessary. Updated WHATWORKS.md to document this finding.
Test count: 246 -> 240 (34 apps)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
New test apps:
- validators: wxTextValidator, wxIntegerValidator, wxFloatingPointValidator, custom validators
- ownerdrawn: wxOwnerDrawnComboBox for custom dropdown rendering (layer/font/icon combos)
- popup: wxPopupTransientWindow for transient popups (status, palette, color picker)
- graphicsctx: wxGraphicsContext for vector graphics (partial WASM support)
- xml: wxXmlDocument for XML parsing (used 665 times in KiCad)
- wasmedge: WASM edge cases (file system, threading, fonts, clipboard, memory)
Updates:
- 35 test apps, 246 tests passing (~99% coverage)
- Document WASM limitations and future TODOs in WHATWORKS.md
- Add baseline screenshots for all new tests
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Implements and tests remaining KiCad-critical wxWidgets features:
- wxPropertyGrid/wxPropertyGridManager for property panels
- wxColourPickerCtrl/wxFontPickerCtrl for color and font selection
- wxCollapsiblePane for expandable UI sections
- wxListCtrl virtual mode for large lists (10,000+ items)
- wxInfoBar for notification messages
Total: 159 tests passing across 20 standalone apps (~90% KiCad coverage)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
