Add shared spline_ops module with:
- spline_to_bspline / bspline_to_spline: acadrust ↔ truck BSplineCurve conversion
- spline_sample_xy: sample DXF-XY projection at N+1 points with parameters
- spline_nearest_t: nearest-parameter search via coarse+bisection
- spline_pts_wire: world-space wire points for WireModel preview
TRIM: Spline entities can now be used as cutting boundaries (Geo::Spline
sampled into polyline segments) and as entities being trimmed; uses
BSplineCurve::cut() to produce surviving pieces.
EXTEND: extend_spline() shoots a tangent ray from the nearest endpoint
and appends a control point at the first boundary hit.
OFFSET: offset_spline() offsets each sample point along the local
perpendicular normal and rebuilds a new spline from the offset control pts.
BREAK: break_spline() uses spline_nearest_t() + BSplineCurve::cut() to
split the spline at one or two click points.
LENGTHEN: lengthen_spline() uses numerical arc-length integration +
bisection to cut the spline at the parameter corresponding to the new
requested length.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Decomposes Dimension (Linear, Aligned, Radius, Diameter, Angular2Ln,
Angular3Pt, Ordinate) into constituent Lines (extension lines, dimension
line) plus a Text entity for the dimension label value.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaced the simplified MOVE-based STRETCH with a real crossing-window
implementation. Workflow: pick two crossing-window corners, then base+target
points. Only vertices/endpoints inside the window are translated:
- Line: moves start/end independently
- LwPolyline/Polyline: moves individual vertices inside window
- Arc/Circle/Ellipse: moves whole entity if center is inside
- Insert/Text/MText: moves if insertion point is inside
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Extended FilletCommand and ChamferCommand to accept Lines and Arcs as
first/second entity. Added fillet_line_arc() and fillet_arc_arc()
geometry functions that find a tangent fillet circle between the two
entities, trim each to the tangent point, and insert the fillet arc.
r=0 case trims/extends to the nearest intersection without inserting an arc.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add explode_mline() that decomposes each MLine segment into its
spine Line plus two ±scale/2 offset Lines using per-vertex miter
directions, matching the visual representation of MLine entities
- Update file header to document all actually-supported entity types
(LwPolyline, Polyline2D/3D, Polyline, Insert, MLine)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add lengthen_ellipse() that approximates the arc length via 128-point
numerical integration, then bisects to find the new angular span matching
the requested delta/total/percent, and adjusts the nearer endpoint.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add offset_ellipse() that scales both semi-axes uniformly by the offset
distance (inside vs outside determined by projecting side_pt onto the
ellipse local frame). This is the standard CAD approximation; a true
offset of an ellipse is a higher-order Lamé curve.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add break_ellipse() that projects the two break points onto the ellipse
parameter space (eccentric anomaly) and removes the CCW segment between
them, producing a partial Ellipse entity — matching AutoCAD break behaviour.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add Ellipse variant to the Geo boundary enum
- Implement algebraic line-ellipse intersection (le()) for fast boundary checks
- Add ellipse_seg_ts() using bisection for all boundary types including
Arc/Circle/Ellipse boundaries (64-sample sign-change + 32-step bisection)
- Add trim_ellipse() producing partial Ellipse entities with updated parameters
- Add extend_ellipse() to stretch an ellipse arc to the nearest boundary
- Wire Ellipse into TrimCommand and ExtendCommand: on_entity_pick,
on_entity_replaced, and on_hover_entity (live red/cyan preview)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Entity pick → text input subcommands:
C / CLOSE → set closed flag
O / OPEN → clear closed flag
W <value> → set uniform width on LwPolyline vertices
X / EXIT → cancel
Command stays active after each op (CmdResult::PeditOp) for multiple edits.
Supports LwPolyline and Polyline2D.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Options via text input after entity pick:
DE <delta> — extend by delta (negative trims)
TO <total> — set absolute total length / arc length
P <percent> — scale by percentage
<number> — plain number treated as DE delta
Closest end to pick point is modified. Uses CmdResult::LengthenEntity.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Selection-gathering mode: select objects, press Enter to apply.
- Lines: checks collinearity + no-gap, merges into single line span
- Arcs: checks same center/radius + contiguous angles, merges to Arc or Circle
- Uses CmdResult::JoinEntities; geometry computed in cmd_result from document
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
3-step interactive flow:
1. Entity pick (first break point recorded at click location)
2. Optional first point refinement
3. Second break point → CmdResult::BreakEntity applied in cmd_result
Geometry:
- Line: project p1/p2 onto line parameter space → two line fragments
- Arc: project p1/p2 to arc angles → trim CCW from p1 to p2
- Circle: same as Arc, converts Circle → Arc
- LwPolyline: nearest-vertex split → two polyline fragments
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Deactivate ribbon tool highlight when command ends (issue #1)
- Reset last_point on new command dispatch to fix polar snap offset (issue #2)
- FILLET/CHAMFER: disable text input during entity pick so clicks reach viewport (issue #3)
- Dropdown icon buttons now use RibbonToolClick so they highlight blue when active
- FILLET/CHAMFER: AutoCAD-style sub-step UX — typing R/D + Enter prompts for value
- Fix FILLET arc preview plane: arc was rendering in XZ instead of XY
- Bump version to 0.1.1
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Each command implementation is now in the same file as its ribbon
tool definition. Groups moved to a dedicated groups/ toolbar folder.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
