An e2e failure used to skip everything downstream: a wx failure skipped the
asyncify suite (&&-chain) and the kicad suite, and any failure skipped the
screenshot check + Discord report entirely — leaving only the bare text notice
even though the rendered screenshots were already on disk.
Now the three suites run as separate steps gated on !cancelled() + "previous
stage wasn't skipped" (build failures still skip all tests), and the screenshot
report runs whenever the suites ran, posting with an --e2e pass/fail badge
computed from the step outcomes — so a wrong or MISSING screenshot (spec died
before page.screenshot() => classified "removed") is visible on Discord on red
builds too. The text-only failure notice becomes a fallback for when the rich
report didn't post (build broke before tests, or the report errored) — no
duplicate ping. A failing suite still fails the job; gating is unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NTxTrY9on6A8gLvogFbGiy
The binopt cache from b4cb10b saved only binaryen-hoist-build/bin, but the
tools dynamically link lib/libbinaryen.so, so the first cache HIT (run
28585074335) failed all 7 tools' finalize with a loader error. Cache bin/ +
lib/, bump the key to binopt-v2 (Ubicloud never re-saves an exact-key hit, so
the poisoned v1 entry can't be repaired in place), and make the
BINARYEN_TRUST_PREBUILT guard exec both tools with --version instead of -x
existence checks so an incomplete restore falls through to a source build.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NTxTrY9on6A8gLvogFbGiy
Four new caches in wasm-build.yml, keyed on their real inputs:
- Binaryen post-process tools (bin/ only, keyed on the submodule SHA): on a
hit BINARYEN_TRUST_PREBUILT=1 tells build-wasm-opt.sh to skip cmake+ninja
and trust the restored binaries (~46s/run). The guard is env-gated so local
pass iteration (uncommitted sources, same SHA) is unaffected.
- Built wx test apps (tests/apps minus kicad/ staging + gal-webgl/): skips
the whole build step on a hit (~3 min — the post-link hoist+asyncify over
~74 apps dominates). Key covers wx SHA + kicad SHA (some apps compile real
KiCad sources: thread_pool.cpp, libcontext), binaryen SHA, tracked app
sources, and the build/post-link scripts + shims. Gated on a wx cache HIT:
the app build creates the libwx_*.a symlinks the GAL link needs, so on a
wx rebuild the apps must rebuild too.
- Host emsdk (tools/emsdk, keyed on the pinned EMSCRIPTEN_VERSION): mostly
availability insurance — a fresh install is only ~23s but pulls ~340 MB
from github.com + storage.googleapis.com on every run. downloads/ tarballs
are pruned before the post-job save.
- Playwright browsers (~/.cache/ms-playwright keyed on tests/package-lock).
Warm-cache runs should drop from ~12 min to ~8-8.5 min (e2e suites are the
floor). Measured baselines from runs 28577824366 / 28520845242.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XeiSRRScdaox5jBueJNcyG
Per request: a screenshot difference shouldn't fail CI; the Discord post is the
signal. Revert the enforcing gate (3efcdcf): drop `--fail-on-change` + the
exit-status gating and restore `continue-on-error` on the on-success report step
(compare.ts exits 0 without the flag). Remove the now-moot fail-notice guard.
Build/e2e failures still post the "CI failed" notice; changed/added/removed still
post the captioned Discord report + perf.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bake a caption strip onto every posted screenshot composite — status + name +
the spec that produces it — for changed, added, and removed; removed now shows
the old baseline image (was a text-only line). Zero native-dep: an embedded
public-domain 8x8 bitmap font (font8x8.ts) rendered by image-ops `withBottomLabel`;
the name→spec attribution is factored out of gen-manifest into a shared
`spec-map.ts` resolver. Bottom strip, colour per status (green/red/orange).
Applies in both compare (drift gate) and changelog (git-history diff), and
post-discord now attaches the captioned removed images.
Also raise the per-engine drift floor 0.2% → 0.5% (changedRatio) to absorb the
sub-1% inter-run flakiness seen after the re-baseline, while still catching real
localized changes.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- kicad-packages3D is STEP-only from the 10.x tags: ensureModelInMemfs
falls back from a missing .wrl to the same-stem .step, written and
answered under the .step path (the returned path's extension picks
the parsing plugin — no C++ awareness). Verified against the live
CDN with the gallery demo board (4/4 wrl refs served as step).
- upload-models-r2.sh: rclone/S3 bulk upload of a local publish layout
(wrangler-per-object can't move ~14k blobs); published 10.0.3 —
105 libs / 7,238 models, 3.4GB raw → 500MB brotli — to pcbjam-cdn.
- deploy-demo.yml MODELS_TAG=10.0.3 → build-demo --models-tag →
VITE_MODELS_MANIFEST_URL (matches LIB_TAG: model refs come from the
footprints at that release).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014AT7gVHRktDYoQ68S4x6A4
Finalize the screenshot review system after the first Linux re-baseline
(that run showed 355/356 stable — the placeholder floor is fine as-is):
- ENFORCE the gate: `screenshots:check --fail-on-change` now fails the build on any
changed/added/removed vs baselines (it still posts the drift report first, so the
failure is actionable; a real render change → re-promote). The generic "CI failed"
notice is suppressed for gate failures so we don't double-post on drift.
- Exclude retinascale-01-loaded: a fullPage HiDPI test whose captured height + DPR
scaling vary run-to-run (~60% inter-run diff) — a flaky test, not render noise.
IGNORE_SCREENSHOTS in config.ts; compare/promote/gen-manifest skip it; baseline removed.
- Kill the baseline-dir shadowing: drop e2e/baseline-screenshots/ from BASELINE_DIRS +
delete its 3 files (grid-tab-final, wxgrid-controls, wxgrid-dedicated-page) that
duplicated names in baseline-screenshots/ with different bytes.
- Prune 12 stale baselines (renamed/removed specs: wizard-01..04, gerbview-wizard-01..04,
zoom-pl_editor-*, popup-03-palette).
- Delete the dead compare-screenshots.sh / update-baseline-screenshots.sh.
- Regenerate screenshot-manifest.json (355 entries).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
env.sh exports a docker-safe JOBS=1 default, and every host build silently
inherited it (the docker kicad path dodges it by passing -j explicitly):
- build-wx-wasm.sh: the intended "${JOBS:-nproc}" fallback sat BELOW the
env.sh source, so it was dead code — full wx builds ran make -j1 on the
Mac and on CI. Compute the all-cores default before env.sh instead
(explicit JOBS/PARALLEL_JOBS still wins); also -j the PCRE pre-build.
- build-wasm-test.sh: same default fix, plus fan the post-link
hoist+asyncify loop out across JOBS with xargs -P. Per-app wasm-opt
can't feed many cores (small modules), so serial stays ~4min even with
BINARYEN_CORES=16; fanning across the 74 independent apps is what
scales. Safe: apply-asyncify is in-place per wasm, injector tmp is
per-js, HOIST_WASMOPT resolved once up front.
- build-gal-webgl-test.sh: make had no -j at all.
Measured on a 16-core M4 Max, clean test-app build: 15m36s (-j1) → 2m08s,
peak RAM 10.7 GB summed across all build processes (64 GB machine; CI
runners have 120 GB). Core counts are always derived from nproc at
runtime — nothing hardcoded, CI workers differ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XeiSRRScdaox5jBueJNcyG
Promote the first green CI run built with the outputDir fix (b270507, run
28572705121) — the run that keeps test-results across the sequential suites.
Overwrites the Mac-rendered baselines with CI's Linux render (churn-free,
verbatim bytes):
- 335 updated — Mac->Linux font/AA rendering (expected, not regressions)
- 14 added — new specs (modal, notebook, pcbnew-move, 3d-viewer, dark-mode, ...)
- 7 unchanged — blank/loading screens identical across platforms
Renders eyeballed (pcbnew / eeschema / wx controls) — all correct UI. From here
the baselines are the Linux source of truth; the next run compares Linux-vs-Linux.
12 stale baselines (renamed specs, e.g. wizard-01 -> wizard-01-loaded) are left in
place pending confirmation — prune separately.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two fixes for the intermittent wx-build failure on CI (zipstrm.cpp: fatal
error: 'zlib.h' file not found, surviving the serial retry):
- build-wx-wasm.sh: --with-zlib=sys resolves to the Emscripten zlib PORT,
which only `embuilder build zlib` installs — and that ran only in the
configure branch. A pre-configured build dir (CI cache) + fresh emsdk
therefore died on any recompile of a zlib-using TU. Ensure the port
before every make; --force because embuilder stamps the port on libz.a
alone, so a half-populated cache would no-op.
- wasm-build.yml: the cache-restore `touch {} +` stamped files ns-apart in
readdir order; GNU make 4.x compares ns mtimes, so objects touched before
a generated header they depend on (wx/setup.h, pcre2.h via .deps/*.d)
recompiled — a random subset per run, which is what made the failure
flaky. Use one shared timestamp instead: equal mtimes = up to date.
Reproduced + validated locally (remove sysroot zlib.h + one .o → exact CI
failure; with fix, self-heals in 0.5s; Linux make ns/equal-mtime behavior
verified in a container).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XeiSRRScdaox5jBueJNcyG
The screenshot report went silent on green CI runs. CI runs four sequential
`playwright test` invocations (wx, asyncify, kicad, perf) that all default their
outputDir to `test-results`; Playwright clears the whole outputDir at the start
of every run, so each suite wiped the previous suite's screenshots. By the time
`compare` ran, only perf-*.json remained -> all 354 baselines read as "removed"
-> the no-render guard stayed silent.
- Gate Playwright's outputDir off test-results/ in CI only
(process.env.CI ? 'pw-artifacts/<suite>' : 'test-results') in the wx / asyncify
/ kicad configs, so the committed-baseline screenshots (page.screenshot to
'test-results/...') accumulate in test-results/ across the suites for compare.
Local single-suite behavior is unchanged.
- post-discord: replace the silent no-render guard with a loud, image-less
pipeline alert ("No screenshots produced this run") when 0 render; genuine
partial removals still post as the normal capped REMOVED list.
- gitignore pw-artifacts/; upload tests/pw-artifacts/** as a CI artifact.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Refer to demo.pcbjam.com from the landing: an accent "Live demo" link in the
header nav, an "Open the live editor" hero link, a note in the gerber section,
and a "Try the live demo now" line in the final CTA.
Rework the embedded gerber viewer (public/gerber-demo/boot.js) to source the
WASM from the deploy pipeline's versioned CDN instead of the hand-synced
assets.pcbjam.com bucket: resolve gerbview's content-addressed folder at runtime
from the release manifest (manifest-latest -> tag -> manifest-<tag> -> gerbview),
load all assets (glue + wasm + images.tar.gz) from cdn.pcbjam.com, and load the
cross-origin pthread worker via a same-origin blob importScripts shim (mirrors
web/standalone/src/wasm/boot.ts). Bump the config-seed KICAD_VERSION_DIR
9.99 -> 10.0 to match the deployed build. Drop the now-obsolete committed glue
mirror and the old assets.pcbjam.com sync/r2-deploy scripts.
Collapse the header nav to the hamburger below 1025px — the added demo link no
longer fits the 1024px-capped bar on a single row.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
New tooling in tests/tools/screenshots/ (TypeScript via tsx):
- compare.ts: one pixelmatch engine (AA-excluded), connected-component
"where to look" boxes, old|new+boxes|heatmap triptych, per-engine floors.
- promote.ts: churn-free updater — overwrite a baseline only when decoded
pixels differ beyond the floor, copying CI bytes verbatim (no re-encode
churn); pulls a CI run via `gh run download` or a local --from dir.
- post-discord.ts: always-on CI-on-main report (SHA + e2e status + the
track-only runtime-perf table), then screenshot triptychs, batched +
size-capped + flood-collapsed + 429-aware.
- perf-report.ts: perf table with Δ vs the previous main run (via gh).
- changelog.ts: no-build git-history baseline differ (Discord trigger B).
- noise.ts / gen-manifest.ts: calibration + manifest generation.
CI wiring:
- wasm-build.yml: post-test step runs the gate + report on the already-
produced test-results (no extra build); report-only (continue-on-error),
posts only on push to main, inert without DISCORD_WEBHOOK_URL.
- ci-ubicloud.yml: secrets: inherit (pass the webhook through).
- screenshot-changelog.yml: ~30s no-build changelog on baseline changes.
screenshot-manifest.json: canonical 354-name set + best-effort engine tags
(313 chromium-swiftshader / 41 firefox-llvmpipe).
Normalize scale:'device'->'css' across 18 spec files (no-op at CI DSF=1)
so committed baselines are uniformly css-scaled.
Design: CI's Linux render is the single source of truth; no pinned
container (accept rare env drift -> re-promote); dev commits via promote.
Replaces the byte-cmp compare-screenshots.sh + file-size-proxy
update-baseline-screenshots.sh (kept for now until the first re-baseline).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds docs/features/hoist-cpp-catches-simplification/ (diagnosis + Layer 1 result) and bumps the binaryen submodule to 1d40cf5a8 (FindAll/BranchUtils refactor + describe-as-is comments of HoistCppCatches). Validated end-to-end: full pcbnew build through the refactored wasm-opt + Firefox pcbnew e2e 6/6.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bumps the wxwidgets submodule to the resize-deadlock fix: wx_window_resize no
longer forces a synchronous wxTheApp->Paint() for a window hosting a wxGLCanvas
(the 3D viewer). That synchronous, nested paint ran the multi-threaded CPU
raytracer from inside the resize call and deadlocked when it had to boot an
on-demand pthread Worker — the 236s mouse.move freeze that reddened CI. The GL
window now repaints via the normal event-loop pump, like a camera move, where the
Worker can boot; dialogs keep the synchronous repaint.
Verified locally against a fresh native-EH BUILD_3D_VIEWER=ON build: 3d-viewer.spec
4/4 green with all four tests in ONE shared serial worker (the frozen scenario);
resize 19.9s. CI green end-to-end.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Measures the current build's cold load, open+render, and pan/zoom FPS
(1x/4x/6x CPU-throttle sweep) for both editors, writing
tests/test-results/perf-*.json. Track-only: asserts only that the app booted
and the document opened — no perf thresholds, so it never gates CI.
Runs on a new Chromium `perf` Playwright project (CDP throttling; pcbnew needs
V8 anyway) via `npm run test:perf`, and is wired into wasm-build.yml as a
continue-on-error step so the numbers are captured/uploaded without flaking the
gate. Reuses the existing fixtures, ready-signal, fs-inject, and board-ready
helpers; FPS counter is cancel-able so a throttle sweep on one page doesn't
accumulate rAF loops.
.gitignore: ignore /benchmark-builds/ (disposable prebuilt-WASM + standalone
harness bundle used to reproduce the native-vs-JS-EH comparison locally).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Benchmark of the WASM exception migration (native -fwasm-exceptions vs
legacy JS-EH) for eeschema + pcbnew, O1/O2, headed/headless: native-EH is
~22%/26% smaller gzip, ~30-35% faster load, and faster ops/FPS; ship the
post-link wasm-opt tail at -O1, not -O2. Full tables + methodology in the doc.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
release.yml's publish-wasm job now uploads .wasm/.js with
`--compress br --quality 11` instead of gzip-6, and IMMUTABLE
content-addressed blobs carry `no-transform` so Cloudflare's edge
can't decompress + re-serve them at its on-the-fly br-4 (and the
original Content-Length passes through).
~15-20% smaller wasm on cdn.pcbjam.com. Forward-only: tool folders
already published stay gzip until their source changes (identity is
hashed over uncompressed bytes, so the compressor switch never
re-versions or re-uploads existing folders).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The Binaryen wasm-opt shrink after Asyncify was the only -O2 in the
pipeline: -O2 by default (local + tag release) but -O1 in main CI. The
C++/wx/deps compile is already -O1 everywhere (DEBUG_BUILD defaults to 1;
nothing passes --release in CI/release). Pin the tail to -O1 too:
- apply-asyncify.sh: BINARYEN_OPT_LEVEL default -O2 -> -O1
- release.yml: opt_level -O2 -> -O1 (demo now ships -O1)
- ci-ubicloud.yml / wasm-build.yml / docker/build.sh: refresh stale -O2 comments
Because both callers now build at -O1, the FINAL cache key converges, so a
tag release FINAL-cache-hits main's build and skips the asyncify-tail
rebuild entirely (previously the ~1-2h -O2 wasm-opt was rerun per release).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The emscripten glue's `var ENV = {};` never merged Module.ENV, so boot.ts's
Module.ENV.KICAD_TRACE was a silent no-op — and since environ_get on a pthread
proxies to the main thread, the app/UI thread's getenv read the (empty) main
ENV. Net: KICAD_TRACE never arrived and every KI_TRACE was a no-op.
scripts/common/patch-env-shim.mjs post-processes each generated <app>.js to
merge Module.ENV into ENV (idempotent; runtime no-op when unset), wired into
docker/build.sh's per-app host post-process next to the dyncall-shim inject.
Replaces a fragile manual glue edit re-applied after every build. Verified:
symbol-editor eager load now emits KI_TRACE_SYM_CHOOSER fatLoad timing.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bumps the kicad submodule to the threading revert (the 3D-viewer raytracer's
WASM single-threaded #ifdef fallbacks + the bs_thread_pool inline shim are gone;
those four files are now byte-identical to upstream KiCad).
Links wasm/shims/nanosleep_yield.c into every app (mirrors the gl_ffp_stub
pattern): the now-upstream raw-thread raytracer joins via a main-thread
sleep_for busy-wait, and this shim makes that nanosleep Asyncify-yield to the JS
event loop instead of deadlocking on on-demand pthread-Worker creation. Its
EM_ASYNC_JS yield is already covered by env.__asyncjs__* in asyncify-imports.txt.
This is what lets upstream's multi-threaded code run on WASM under native-EH.
Also documents isolated-worktree + submodule-branch creation in the README.
Result: ~11x faster 3D raytrace (21.3s -> 1.9s, 16 threads), pixel-correct
render, full kicad e2e green (63 passed / 0 failed).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The native-EH migration left tests/gal-regression/wasm/Makefile on the old
Emscripten JS-exception model (-sNO_DISABLE_EXCEPTION_CATCHING, no
-fwasm-exceptions). The wxWidgets libs it links are now built with
-fwasm-exceptions, so wasm-ld couldn't resolve __cpp_exception / __c_longjmp and
the "Build GAL WebGL test app" CI step failed. This was masked until now because
the host post-process (finalize) bug killed every run before this step ran.
Compile and link with DEPS_EH_FLAGS (-fwasm-exceptions -sSUPPORT_LONGJMP=wasm
-sWASM_LEGACY_EXCEPTIONS=1), honoring the value build-gal-webgl-test.sh exports
via env.sh with a Makefile ?= fallback — matching the wxWidgets test-app build.
Drop the now-incompatible -sNO_DISABLE_EXCEPTION_CATCHING.
Verified locally: ./scripts/build-gal-webgl-test.sh links clean against the
native-EH wx libs and produces gal_webgl_test.{js,wasm}.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The native-EH migration pointed apply-finalize.sh at emsdk's bundled
wasm-emscripten-finalize (${EMSDK:-tools/emsdk}/upstream/bin), which exists on a
dev machine (tools/emsdk persists from a prior build) but never on the ephemeral
CI host — emsdk lives only inside the Docker image, and nothing on the host
post-process path provisions it. So the host post-process died at finalize for
every app once the binaryen-SHA cache re-key forced it to actually run. (Not the
missing-ninja theory — ninja was installed; the run never reached the wasm-opt
build, which is downstream of finalize.)
Finish the "Binaryen submodule everywhere" migration: build-wasm-opt.sh now also
builds wasm-emscripten-finalize, and apply-finalize.sh takes it from that build
(next to wasm-opt). The host post-process is now emsdk-free (dyncall=node,
finalize+asyncify=submodule v130) and finalize/wasm-opt share one Binaryen
version (previously finalize was emsdk's v121, wasm-opt the submodule's v130).
get-wasm-opt.sh stays for bench only; dropped it from the wasm cache key and
added build-wasm-opt.sh.
Also surface the from-source Binaryen build as a "Build Binaryen" stage in
build-monitor.sh (it had no marker), emitted at the pipelined pre-warm sites.
Validated: a clean from-scratch `docker/build.sh calculator --build-deps` (deps +
compile + finalize via the submodule binary + asyncify + -O2) succeeded
end-to-end; finalize resolved to build-wasm/tools/binaryen-hoist-build/bin.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two pnpm workspaces (root globs pcbjam-shared; pcbjam/web has it too) each install yjs, so shared's collab code (kicad-y) and the app's yjs were two physical copies → a Y.Map rejects the other instance's Y types ('Unexpected content type'). resolve.dedupe:['yjs'] in vite + vitest forces a single copy. Not a test-only artifact: the same two copies bundle into the editor and would break collab on doc seed. Full standalone suite now 55/55 (was 47/55).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
backend-example (open ref backend): USER_HEADER, scope on the project DTO, raw routes under /api/scopes/:scope, no-op reportDrift + DOM lib (was red on main → now typecheck-green). GPL web specs (tools-open, symbol/footprint-write-remote, global-setup-web): /p/demo/:tool/* → /:scope/projects/demo/(file | -/:tool), direct API fetches scoped + x-pcbjam-owner → x-pcbjam-user. Reference backend keeps lib type 'user' (cosmetic vs closed 'org').
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the legacy Emscripten JS-exceptions model with native wasm-EH (legacy
encoding) across the whole build, keeping Asyncify coroutines working via a
from-source Binaryen --hoist-cpp-catches pre-pass. Net result: native-EH is the
only build mode, the 3D viewer is on by default, and pcbnew shrinks substantially.
Highlights:
- Binaryen submodule everywhere + --hoist-cpp-catches integration in apply-asyncify;
post-link Asyncify covers every app wasm (not just standalone test wasm).
- Build deps (incl. OpenCASCADE without OCC_CONVERT_SIGNALS) and all KiCad apps
with -fwasm-exceptions; emscripten_sleep added to the post-link asyncify-imports.
- libcontext fiber entry wired under native exceptions; while-loop main loop +
currData shim injected into all wx apps.
- Native-EH collab apply fixed: DEBUG-define the embind TU + match all out-of-CMake
C++ TUs' ABI flags to the core, fixing the vtable-layout skew / mis-dispatch.
- 3D viewer enabled by default (real raytracer linked, not the stub).
- Retire the EH-spike scaffolding; flip the asyncify-races ablation pins to
shim-redundancy pins (native-EH stays clean with the legacy shims ablated).
- Fix the asyncify-races quiescence check to not require Asyncify.currData==0:
under the native-EH per-frame-yield top loop the main stack is asyncify-suspended
every frame, so currData legitimately churns (a freed-but-not-yet-nulled buffer,
not a leak). Refresh the pcbnew toolbar screenshot baseline for the new kicad.
- CI: drop the obsolete binaryen_version input/env (the build uses the binaryen
submodule fork's wasm-opt, not a version download); key the wasm-output cache on
the binaryen submodule SHA instead.
Bumps the wxwidgets + binaryen submodules to their squashed feature commits.
Validated green: all 7 apps native-EH (real 3D in pcbnew); KiCad e2e 63/63
Firefox + Chromium (3D viewer renders); wx 336; coroutine 34/34 both engines;
asyncify 7/7 both engines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bump kicad to the KiFACE()-returns-nullptr fix so eeschema's Preferences
stops showing blank Footprint/PCB/3D/Gerber panels for editors not present
in a single-app build.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bump wxwidgets to the %p->%zu radio-group name fix and add a standalone
wxWidgets harness plus an e2e regression that asserts three radio groups
in one window select independently. Build artifacts are gitignored; only
radiogroups_test.cpp is tracked.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Waitlist signup form on the home page (between Projects and Tools),
cross-posting to the landing site's /api/waitlist (CORS + OPTIONS added there,
gated by WAITLIST_ALLOWED_ORIGINS).
- Version badge gains a pcbjam.com landing-page link (VITE_LANDING_URL).
- Optional Plausible analytics from VITE_PLAUSIBLE_DOMAIN (off by default);
wired into build-demo + both deploy workflows via vars.PLAUSIBLE_DOMAIN.
- Opening a read-only gallery project auto-"moves to local": it forks into a
writable browser-local project at the same slug, shadowing the gallery row.
- Project + local-folder views use the same iconed tool launcher (ToolGrid)
and a navigable directory FileTree instead of a flat file list.
- Boot overlay shows real wasm download progress (Module.instantiateWasm +
streaming byte counter) and a "taking too long" state after 60s.
- Home Libraries section lists the active libs source (the read-only R2/CDN
set in the demo) with a name filter; useLibs now reads libsSourceConfig.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TPJYx4urFVhdMjEmYfMCMD
Bumps kicad submodule fef0343 -> 9285d52:
- fix(wasm): lazy footprint library load — no-op enumerateLibrary + on-demand
GetFootprints (mirror of the symbol lazy-load). Fixes the standalone PCB
editor never opening: boot enumerated every global footprint library inline
on the main thread (each a CDN fetch + parse) before first paint, freezing
the tab. Footprints now load on demand (Add-Footprint chooser / footprint
editor tree). eeschema was already lazy; footprint editor boots faster too.
Verified in the local demo: PCB editor and footprint editor both render; the
Add-Footprint chooser lists all ~222 libraries with footprint content fetched
on chooser-open, not at boot.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Eu9CbU7EybM8NEjDZD3hq7
After the kicad fork was rebased onto KiCad 10.0.4, GetMajorMinorVersion() (and
thus PATHS::GetUserSettingsPath()'s version subdir) became "10.0", but the
standalone still seeded the global sym-lib-table / config under
~/.config/kicad/kicad/9.99/. The WASM read .../10.0/ and found nothing, so
LIBRARY_MANAGER loaded 0 symbol-table rows and the Add Symbol / Add Power
choosers came up empty ("0 items loaded") with no library list requests.
Aligning KICAD_VERSION_DIR with the build's version makes the chooser load all
222 CDN libraries (19,779 symbols) again. Verified in the local demo against live
R2 (libs/kicad/10.0.3). The footprint editor / pcbnew read the same dir, so this
fixes their libraries too.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
scripts/deploy/dev-demo.mjs (+ `pnpm dev:demo`) is the dev sibling of
build-demo.mjs: it runs the standalone via `vite dev` in the no-backend demo
configuration so a local WASM build can be exercised against the live R2 CDN.
- libraries: live R2 CDN (VITE_LIBS_SOURCE=cdn, libs/kicad/<lib-tag>, default
10.0.3) — IDB-cached, read-only; the lazy/fat lib-load path
- projects: the read-only example gallery (deploy/demo/gallery.json → the same
"Demo Board") built locally via publish-content.mjs and served same-origin at
/content/<gallery-tag>/; --content-tag pins the live CDN gallery instead;
--no-gallery falls back to local-folder + IDB only
- no partykit (VITE_YJS_PROVIDER=broadcastchannel), no REST backend
(offline.invalid → local-folder loader), browser-local IDB projects
- WASM: local fresh build at /wasm (default) or --wasm r2
The generated gallery (public/content symlink, web/standalone/.demo-cdn) is
gitignored, mirroring the public/wasm dev symlink.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Provides wasm/stubs/model_substitution_stub.cpp — no-op IsWrlExtension /
STEP_CATALOG::Build / FindMatchFor — so pcbnew and footprint_editor link when the
3D viewer is off (KICAD_BUILD_3D_VIEWER_WASM=OFF). The KiCad 10 rebase made
dialog_migrate_3d_models.cpp reference these, which live in the unlinked 3D
library. The browser build has no 3D viewer, so model migration finds no
substitutions. Bumps kicad to the matching CMake wiring (fef0343).
Verified: pcbnew + footprint_editor compile and link clean (eeschema/symbol_editor
unaffected).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
