-
B fix adaptive slicing with multi-extruder
-
B fix supports with grouped parts
-
B multi-extruder rendering of raft fails to offset the rest of the print
-
B multi-extruder purge blocks fail to generate properly for rafts
-
F redo auto supports to use poly faces rather than deltas
-
F control for size of purge block (with 0=disabled)
-
F control layer start position
-
F add separate fill speed control
-
F polishing and other non-planar work
-
F gradient infill https://www.youtube.com/watch?v=hq53gsYREHU&feature=emb_logo
-
F first layer segment large flat areas for better fill reliability
-
F feather sharp tips by reducing extrusion in area of overlap
-
F enable purge blocks when quick layers are detected
-
F option to support interior bridges when 0% infill
-
F trim support offset from layer below
-
F calculate filament use per extruder per print
-
F first layer support speed should be same as shell speed
-
F apply finish speed to exposed top and underside flat areas
-
F expand internal supporting flats / solids before projection
-
F continuous printing (z belt systems)
-
P implement infill clipping in wasm
-
P solid fill the tops of supports for down facing flats
-
P sparse infill should follow polys between intersect points
-
B z thru doesn't respect step down
-
B failure to go up when moving between parts?
-
B starting export during animation unleashes chaos
-
B climb vs conventional not fully consistent after refactor
-
B outside cutting direction in roughing mode inverted
-
B top clearing operations should use linear, not offset, passes
-
B on rotation, tabs dissociate from parts whose center changes with rotation
-
F add linear clearing strategy option for roughing / pocket
-
F extend acute roughing on inside polys to clear small voids
-
F option to use part / STL coordinate space to determine X,Y origin
-
F validate muti-part layout and spacing exceeds largest outside tool diameter
-
F skip "thru" holes checkbox for roughing and outlining
-
F polygon simplification option in tracing (for image derived maps)
-
F exports separate files for each operation
-
F switch z top offset to a z anchor (top/bottom) + offset
-
F A-B linked cutting profiles for double-sided milling / part flips
-
F parameterize dropping close points in prep.js. ensure long segments remain straight
-
F flat and volumetric rendering of paths
-
F z bounded slices (extension of z bottom offset feature)
-
F z planar settings visualizations
-
F convert acute angles to arcs
-
F lead-in milling
-
F adaptive clearing in roughing mode
-
F trapezoidal tabs (in the Z axis)
-
F ease-in and ease-out especially on tab cut-out start/stop
-
F add option to spiral in vs out (optimal tool life) vs mixed (optimal path)
-
F add support for tapered ball mills
-
F warn when part > stock or cuts go outside bed
-
F animation should clear the mesh in areas where the cuts go through the stock?
-
F support lathe mode / A-axis / rotary
-
F gcode output option as zip for multiple or flip ops
-
P detect render message backlog and pause or warn
-
P redo all path route / planning in prepare to account for terrain before camOut
-
P allow faster z movements when contouring (not plunging)
