AI_Assistant/cad-editor
Watch
1
0
Fork
You've already forked cad-editor
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
cad-editor/COMMANDS.md
Hakan Seven 2a72227d5d feat(attribute): route ATTMAN/BATTMAN to the attribute editor (ATTEDIT) 
ATTMAN and BATTMAN previously produced a command-line listing of block
attributes. Route both to the attribute editor instead: extract the bare
ATTEDIT behavior into a shared open_attedit_dialog helper (edit the
selected block, or start the block-pick command) and call it from the
ATTEDIT, ATTMAN, and BATTMAN arms.

Kept as a match arm rather than an ocad.pgp alias so it works for
existing users, whose config pgp is only seeded on first run.

Replace the listing regression tests with one asserting ATTMAN and
BATTMAN behave byte-for-byte like ATTEDIT.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-11 09:37:54 +03:00

370 lines
14 KiB
Markdown
Raw Blame History

# Open CAD Studio — Command Reference
Status of every standard CAD command in Open CAD Studio:
- ✅ **Implemented** — fully working
- 🔶 **Partial** — command is accepted but logic is a stub
- ❌ **Missing** — not yet implemented
---
## Draw
| Command | Alias | Description | Status |
|---|---|---|---|
| `LINE` | L | Straight line segment | ✅ |
| `PLINE` | PL | Polyline | ✅ |
| `ARC` | A | Arc | ✅ |
| `CIRCLE` | C | Circle | ✅ |
| `ELLIPSE` | EL | Ellipse | ✅ |
| `RECTANGLE` | REC | Rectangle | ✅ |
| `POLYGON` | POL | Regular polygon | ✅ |
| `XLINE` | XL | Infinite construction line | ✅ |
| `RAY` | — | One-way infinite line | ✅ |
| `SPLINE` | SPL | NURBS spline | ✅ |
| `SPLINEFIT` | FITSPLINE | Fit a spline through a polyline's points | ✅ |
| `MLINE` | ML | Multiline | ✅ |
| `POINT` | PO | Point | ✅ |
| `DONUT` | DO | Filled ring | ✅ |
| `HATCH` | H | Hatch fill | ✅ |
| `GRADIENT` | GD | Gradient fill | ✅ |
| `BOUNDARY` | BO | Boundary polyline / region | ✅ |
| `REVCLOUD` | — | Revision cloud | ✅ |
| `WIPEOUT` | WO | Wipeout mask | ✅ |
| `MTEXT` | MT | Multiline text | ✅ |
| `TEXT` | DT | Single-line text | ✅ |
| `TABLE` | — | Table entity | ✅ |
| `DIVIDE` | DIV | Divide entity into equal parts | ✅ |
| `MEASURE` | ME | Divide entity at measured intervals | ✅ |
| `3DPOLY` | — | 3D polyline | ✅ |
| `HELIX` | — | 3D helix | ✅ |
| `TRACE` | — | Thick 2D line (legacy) | ✅ |
| `SKETCH` | — | Freehand sketch | ✅ |
| `SOLID` | SO | Filled 2D shape (legacy) | ✅ |
| `MINSERT` | — | Matrix block insert | ✅ |
| `REGION` | REG | 2D closed region | ✅ |
| `FIELD` | — | Auto-updating text field | ❌ |
---
## Modify
| Command | Alias | Description | Status |
|---|---|---|---|
| `MOVE` | M | Move | ✅ |
| `COPY` | CO | Copy | ✅ |
| `ROTATE` | RO | Rotate | ✅ |
| `SCALE` | SC | Scale | ✅ |
| `MIRROR` | MI | Mirror | ✅ |
| `OFFSET` | O | Offset | ✅ |
| `TRIM` | TR | Trim | ✅ |
| `EXTEND` | EX | Extend | ✅ |
| `STRETCH` | S | Stretch | ✅ |
| `FILLET` | F | Fillet | ✅ |
| `CHAMFER` | CHA | Chamfer | ✅ |
| `ARRAY` | AR | Array | ✅ |
| `ARRAYRECT` | — | Rectangular array | ✅ |
| `ARRAYPOLAR` | — | Polar array | ✅ |
| `ARRAYPATH` | — | Path array | ✅ |
| `BREAK` | BR | Break entity | ✅ |
| `BREAKATPOINT` | — | Break at point | ✅ |
| `JOIN` | J | Join entities | ✅ |
| `EXPLODE` | X | Explode compound entity | ✅ |
| `ERASE` | E | Erase | ✅ |
| `LENGTHEN` | LEN | Lengthen / shorten | ✅ |
| `PEDIT` | PE | Edit polyline | ✅ |
| `SPLINEDIT` | SPE | Edit spline | ✅ |
| `MATCHPROP` | MA | Match properties | ✅ |
| `SCALETEXT` | — | Scale text objects | ✅ |
| `FLATTEN` | — | Flatten 3D to 2D | ✅ |
| `DRAWORDER` | DR | Draw order | ✅ |
| `ALIGN` | AL | Align | ✅ |
| `GROUP` | G | Group | ✅ |
| `UNGROUP` | UG | Ungroup | ✅ |
| `OVERKILL` | — | Remove duplicate geometry | 🔶 |
| `3DMOVE` | — | 3D move | ✅ |
| `3DROTATE` | ROTATE3D | 3D rotate (cached solid) | ✅ |
| `3DMIRROR` | MIRROR3D | 3D mirror (cached solid) | ✅ |
| `3DALIGN` | ALIGN3D | 3D align (cached solid) | ✅ |
| `3DARRAY` | ARRAY3D | 3D array | ✅ |
| `SLICE` | SL | Slice solid with plane | ✅ |
| `SUBTRACT` | SU | Subtract solids | ✅ |
| `UNION` | UNI | Union solids | ✅ |
| `INTERSECT` | IN | Intersect solids | ✅ |
| `CHAMFERSOLID` | — | Chamfer solid edge | ❌ |
| `FILLETEDGE` | — | Fillet solid edge | ❌ |
---
## Dimension
| Command | Alias | Description | Status |
|---|---|---|---|
| `DIMLINEAR` | DLI | Linear dimension | ✅ |
| `DIMALIGNED` | DAL | Aligned dimension | ✅ |
| `DIMANGULAR` | DAN | Angular dimension | ✅ |
| `DIMRADIUS` | DRA | Radius dimension | ✅ |
| `DIMDIAMETER` | DDI | Diameter dimension | ✅ |
| `DIMORDINATE` | DOR | Ordinate dimension | ✅ |
| `DIMCONTINUE` | DCO | Continue dimension | ✅ |
| `DIMBASELINE` | DBA | Baseline dimension | ✅ |
| `QDIM` | — | Quick dimension | ✅ |
| `DIMEDIT` | DED | Edit dimension text / position | ✅ |
| `DIMTEDIT` | DIMTED | Move dimension text | ✅ |
| `DIMBREAK` | DBR | Break dimension line | ✅ |
| `DIMSPACE` | DSPACE | Adjust spacing between dimensions | ✅ |
| `DIMJOGLINE` | DJL | Jog line in dimension | ✅ |
| `TOLERANCE` | TOL | Geometric tolerance | ✅ |
| `LEADER` | LE | Leader line (legacy) | ✅ |
| `MLEADER` | MLD | Multileader | ✅ |
| `MLEADERADD` | MLA | Add leader segment | ✅ |
| `MLEADERREMOVE` | MLR | Remove leader segment | ✅ |
| `MLEADERALIGN` | MLAL | Align multileaders | ✅ |
| `MLEADERCOLLECT` | MLC | Collect multileaders | ✅ |
| `DIMJOGGED` | DJO | Jogged radius dimension | ✅ |
| `DIMCENTER` | DCE | Center mark | ✅ |
| `CENTERLINE` | — | Center line | ✅ |
| `CENTERMARK` | — | Center mark on arc/circle | ✅ |
| `QLEADER` | QL | Quick leader (legacy) | ✅ |
---
## Text & Table
| Command | Alias | Description | Status |
|---|---|---|---|
| `STYLE` | ST | Text style manager | ✅ |
| `DDEDIT` | ED | Edit text | ✅ |
| `FIND` | — | Find and replace text | ✅ |
| `TABLESTYLE` | TS | Table style manager | ✅ |
| `DATALINK` | — | Link table to external spreadsheet (CSV) | ✅ |
| `ARCTEXT` | — | Text along an arc | ✅ |
| `TORIENT` | — | Orient text for readability | ✅ |
| `DATAEXTRACTION` | — | Data extraction wizard | 🔶 |
| `FIELD` | — | Auto-updating text field | ❌ |
| `SPELL` | SP | Spell check | ❌ |
---
## Layer
| Command | Alias | Description | Status |
|---|---|---|---|
| `LAYER` | LA | Layer manager | ✅ |
| `LAYOFF` | — | Turn layer off | ✅ |
| `LAYON` | — | Turn layer on | ✅ |
| `LAYFRZ` | — | Freeze layer | ✅ |
| `LAYTHW` | — | Thaw layer | ✅ |
| `LAYLCK` | — | Lock layer | ✅ |
| `LAYULK` | — | Unlock layer | ✅ |
| `LAYMCUR` | — | Make object's layer current | ✅ |
| `LAYMATCH` | — | Match layer of selected object | ✅ |
| `VPLAYER` | — | Viewport layer control | ✅ |
| `LINETYPE` | LT | Linetype manager | ✅ |
| `LTSCALE` | — | Global linetype scale | ✅ |
| `LAYISO` | — | Isolate layer | ✅ |
| `LAYUNISO` | — | End layer isolation | ✅ |
| `LAYDEL` | — | Delete layer | ✅ |
| `LAYMRG` | — | Merge layers | ✅ |
| `LAYERSTATE` | LAS | Save / restore layer states | ✅ |
| `LAYWALK` | — | Walk through layers | ❌ |
| `LAYLOCKFADECTL` | — | Locked layer fading control | ❌ |
---
## Block & Reference
| Command | Alias | Description | Status |
|---|---|---|---|
| `BLOCK` | B | Define block | ✅ |
| `INSERT` | I | Insert block | ✅ |
| `MINSERT` | — | Matrix block insert | ✅ |
| `WBLOCK` | W | Write block to file | ✅ |
| `XATTACH` | XA | Attach external reference | ✅ |
| `XREF` | XR | External reference manager | ✅ |
| `XRELOAD` | — | Reload external reference | ✅ |
| `XCLIP` | XC | Clip external reference | ✅ |
| `REFEDIT` | — | Edit reference in-place | ✅ |
| `REFCLOSE` | — | Close reference edit | ✅ |
| `BEDIT` | BE | Block editor | ✅ |
| `BASE` | — | Set drawing base point | ✅ |
| `NCOPY` | — | Copy nested objects out of a block | ✅ |
| `ATTDEF` | ATT | Define attribute | ✅ |
| `ATTEDIT` | ATE | Edit attribute | ✅ |
| `ATTEXT` | — | Extract attributes (legacy) | ✅ |
| `ATTSYNC` | — | Synchronize attribute definitions | ✅ |
| `BLOCKPALETTE` | — | Multi-view block palette (command-line list) | 🔶 |
| `ATTMAN` | `BATTMAN` | Block attribute manager (opens the attribute editor) | ✅ |
| `XBIND` | XB | Bind xref elements to drawing | ❌ |
| `XOPEN` | — | Open xref for editing | ✅ |
| `BSAVE` | — | Save block in editor | ❌ |
| `BCLOSE` | — | Close block editor | ❌ |
---
## 3D Modeling
| Command | Alias | Description | Status |
|---|---|---|---|
| `BOX` | — | Box solid | ✅ |
| `SPHERE` | — | Sphere solid | ✅ |
| `CYLINDER` | — | Cylinder solid | ✅ |
| `CONE` | — | Cone solid | ✅ |
| `WEDGE` | — | Wedge solid | ✅ |
| `TORUS` | — | Torus solid | ✅ |
| `PYRAMID` | PYR | Pyramid solid | ✅ |
| `POLYSOLID` | — | Wall-like solid | ✅ |
| `EXTRUDE` | EXT | Extrude profile | ✅ |
| `PRESSPULL` | — | Push / pull a closed boundary | ✅ |
| `THICKEN` | — | Thicken a closed profile to a solid | ✅ |
| `REVOLVE` | REV | Revolve profile around axis | ✅ |
| `SWEEP` | — | Sweep profile along path | ✅ |
| `LOFT` | — | Loft between profiles | ✅ |
| `MASSPROP` | — | Mass properties | ✅ |
| `EXPORTSTEP` | — | Export to STEP | ✅ |
| `EXPORTSTL` | — | Export to STL | ✅ |
| `SLICE` | SL | Slice solid with plane | ✅ |
| `SUBTRACT` | SU | Subtract solids | ✅ |
| `UNION` | UNI | Union solids | ✅ |
| `INTERSECT` | IN | Intersect solids | ✅ |
| `INTERFERE` | INF | Interference solid from overlap | ✅ |
| `SECTION` | — | Cross-section outline of a solid | ✅ |
| `CONVTOSOLID` | — | Convert to solid | ❌ |
| `CONVTOSURFACE` | — | Convert to surface | ✅ |
| `SECTIONPLANE` | — | Section plane object | ❌ |
| `FLATSHOT` | — | 2D view from 3D | ✅ |
---
## View & Navigation
| Command | Alias | Description | Status |
|---|---|---|---|
| `ZOOM` | Z | Zoom | ✅ |
| `PAN` | P | Pan | ✅ |
| `ORBIT` | 3DO | 3D orbit | ✅ |
| `VPORTS` | — | Viewport configuration | ✅ |
| `VPJOIN` | — | Join viewports | ✅ |
| `SYNCPVIEWPORTS` | VPSYNC | Sync viewport display settings | ✅ |
| `MSPACE` | MS | Switch to model space | ✅ |
| `PSPACE` | PS | Switch to paper space | ✅ |
| `MVIEW` | MV | Model view in layout | ✅ |
| `UCSICON` | — | Toggle UCS icon | ✅ |
| `VIEW` | V | Named views manager | ✅ |
| `PLAN` | — | Switch to plan view | ✅ |
| `NAVVCUBE` | — | Toggle ViewCube | 🔶 |
| `NAVBAR` | — | Toggle navigation bar | 🔶 |
| `TOOLPALETTES` | — | Tool palettes panel | 🔶 |
| `PROPERTIES` | PR | Properties palette | 🔶 |
| `SHEETSET` | SSM | Sheet set manager | 🔶 |
| `FILETAB` | — | Toggle file tabs | 🔶 |
| `LAYOUTTAB` | — | Toggle layout tabs | 🔶 |
| `DVIEW` | DV | Dynamic view (legacy) | ❌ |
| `NAVSWHEEL` | — | Steering wheel | ❌ |
| `RENDER` | RR | Render | ❌ |
| `RENDERPRESETS` | — | Render presets | ❌ |
| `LIGHT` | — | Add scene light | ❌ |
| `SUNPROPERTIES` | — | Sun light settings | ❌ |
| `MATERIALS` | MAT | Material editor | ❌ |
| `VISUALSTYLES` | — | Apply a built-in visual style (no custom-style manager) | 🔶 |
| `HIDE` | HI | Hidden-line regeneration | ✅ |
| `VPMAX` | — | Maximize viewport | ❌ |
| `VPMIN` | — | Restore viewport | ❌ |
---
## Inquiry
| Command | Alias | Description | Status |
|---|---|---|---|
| `AREA` | — | Calculate area | ✅ |
| `MASSPROP` | — | Mass properties | ✅ |
| `QSELECT` | — | Quick select | ✅ |
| `STATUS` | — | Drawing status | ✅ |
| `COUNT` | — | Count objects | ✅ |
| `DIST` | DI | Distance between two points | ✅ |
| `ID` | — | Point coordinate | ✅ |
| `LIST` | LI | List object data | ✅ |
| `DBLIST` | — | List all objects | ✅ |
| `MEASUREGEOM` | — | Measure distance / angle / area | ✅ |
| `CAL` | — | Command-line calculator | ✅ |
| `QUICKCALC` | QC | Quick calculator | ✅ |
---
## File & Plot
| Command | Alias | Description | Status |
|---|---|---|---|
| `NEW` | — | New drawing | ✅ |
| `OPEN` | — | Open drawing | ✅ |
| `SAVE` | — | Save | ✅ |
| `SAVEAS` | — | Save as | ✅ |
| `QSAVE` | — | Quick save | ✅ |
| `SAVEALL` | — | Save all open drawings | ✅ |
| `PLOT` | — | Print / plot | ✅ |
| `EXPORT` | — | Export | ✅ |
| `EXPORTPDF` | — | Export to PDF | ✅ |
| `PAGESETUP` | — | Page setup | ✅ |
| `PLOTSTYLE` | — | Plot style | ✅ |
| `PURGE` | PU | Purge unused items | ✅ |
| `QUIT` | — | Exit application | ✅ |
| `RECOVER` | — | Recover damaged drawing | ❌ |
| `CLOSE` | — | Close drawing | ✅ |
| `ARCHIVE` | — | Package drawing + references into a folder | ✅ |
| `ETRANSMIT` | — | Transmittal package (folder) | ✅ |
---
## Manage & Customize
| Command | Alias | Description | Status |
|---|---|---|---|
| `RENAME` | — | Rename named objects | ✅ |
| `LINETYPE` | LT | Linetype manager | ✅ |
| `PLOTSTYLEEDITOR` | — | Plot style editor | ✅ |
| `MLEADERSTYLE` | — | Multileader style manager | ✅ |
| `DIMSTYLE` | D | Dimension style manager | ✅ |
| `CUI` | — | Customize user interface | ✅ |
| `CUIIMPORT` | — | Import customization file | ✅ |
| `CUIEXPORT` | — | Export customization file | ✅ |
| `ALIASEDIT` | — | Edit command aliases | ✅ |
| `OPTIONS` | OP | Application settings (drafting) | ✅ |
| `OBJECTSCALE` | — | Mark objects annotative | ✅ |
| `SCRIPT` | SCR | Run script file | ✅ |
| `AUDIT` | — | Audit drawing integrity | 🔶 |
| `OVERKILL` | — | Remove duplicate geometry | 🔶 |
| `FINDNONPURGEABLE` | — | Find non-purgeable items | 🔶 |
| `XBIND` | — | Bind xref elements | ❌ |
| `HYPERLINK` | — | Insert hyperlink | ✅ |
| `DBCONNECT` | — | Connect to external database | ❌ |
| `APPLOAD` | — | Load application (LISP / ARX) | ❌ |
| `NETLOAD` | — | Load .NET plug-in | ❌ |
| `ACTRECORD` | — | Record action macro | ❌ |
| `ACTMANAGER` | — | Action macro manager | ❌ |
---
## Summary
| Category | Total | ✅ Done | 🔶 Partial | ❌ Missing |
|---|---|---|---|---|
| Draw | 32 | 31 | 0 | 1 |
| Modify | 42 | 39 | 1 | 2 |
| Dimension | 26 | 26 | 0 | 0 |
| Text & Table | 10 | 7 | 1 | 2 |
| Layer | 19 | 17 | 0 | 2 |
| Block & Reference | 23 | 18 | 2 | 3 |
| 3D Modeling | 27 | 25 | 0 | 2 |
| View & Navigation | 32 | 15 | 8 | 9 |
| Inquiry | 12 | 12 | 0 | 0 |
| File & Plot | 17 | 16 | 0 | 1 |
| Manage & Customize | 22 | 13 | 3 | 6 |
| **Total** | **262** | **219** | **15** | **28** |
> Counts include commands listed under more than one category (e.g. `SLICE`, `HELIX`,
> `MINSERT`, `SUBTRACT`/`UNION`/`INTERSECT` appear in both their 2D and 3D groups).
>
> Still out of scope: `POINTCLOUDATTACH`/`RECAP` (proprietary binary point-cloud parser
> plus a GPU point renderer) and `UNDERLAYLAYERS`/`UOSNAP` (PDF/DWF internal-layer
> parsing) — each needs an external dependency and real test files.
Reference in a new issue View git blame Copy permalink