cad-editor/COMMANDS.md

Open CAD Studio — Command Reference

Status of every standard CAD command in Open CAD Studio:

• ✅ Implemented — fully working
• 🔶 Partial — command is accepted but logic is a stub
• ❌ Missing — not yet implemented

---

Draw

Command	Alias	Description	Status
LINE	L	Straight line segment	✅
PLINE	PL	Polyline	✅
ARC	A	Arc	✅
CIRCLE	C	Circle	✅
ELLIPSE	EL	Ellipse	✅
RECTANGLE	REC	Rectangle	✅
POLYGON	POL	Regular polygon	✅
XLINE	XL	Infinite construction line	✅
RAY	—	One-way infinite line	✅
SPLINE	SPL	NURBS spline	✅
MLINE	ML	Multiline	✅
POINT	PO	Point	✅
DONUT	DO	Filled ring	✅
HATCH	H	Hatch fill	✅
GRADIENT	GD	Gradient fill	✅
BOUNDARY	BO	Boundary polyline / region	✅
REVCLOUD	—	Revision cloud	✅
WIPEOUT	WO	Wipeout mask	✅
MTEXT	MT	Multiline text	✅
TEXT	DT	Single-line text	✅
TABLE	—	Table entity	✅
DIVIDE	DIV	Divide entity into equal parts	✅
MEASURE	ME	Divide entity at measured intervals	✅
3DPOLY	—	3D polyline	❌
HELIX	—	3D helix	❌
REGION	REG	2D closed region	❌
TRACE	—	Thick 2D line (legacy)	❌
SKETCH	—	Freehand sketch	❌
SOLID	SO	Filled 2D shape (legacy)	❌
MINSERT	—	Matrix block insert	❌
FIELD	—	Auto-updating text field	❌

---

Modify

Command	Alias	Description	Status
MOVE	M	Move	✅
COPY	CO	Copy	✅
ROTATE	RO	Rotate	✅
SCALE	SC	Scale	✅
MIRROR	MI	Mirror	✅
OFFSET	O	Offset	✅
TRIM	TR	Trim	✅
EXTEND	EX	Extend	✅
STRETCH	S	Stretch	✅
FILLET	F	Fillet	✅
CHAMFER	CHA	Chamfer	✅
ARRAY	AR	Array	✅
ARRAYRECT	—	Rectangular array	✅
ARRAYPOLAR	—	Polar array	✅
ARRAYPATH	—	Path array	✅
BREAK	BR	Break entity	✅
BREAKATPOINT	—	Break at point	✅
JOIN	J	Join entities	✅
EXPLODE	X	Explode compound entity	✅
ERASE	E	Erase	✅
LENGTHEN	LEN	Lengthen / shorten	✅
PEDIT	PE	Edit polyline	✅
SPLINEDIT	SPE	Edit spline	✅
MATCHPROP	MA	Match properties	✅
SCALETEXT	—	Scale text objects	✅
FLATTEN	—	Flatten 3D to 2D	✅
DRAWORDER	DR	Draw order	✅
ALIGN	AL	Align	✅
GROUP	G	Group	✅
UNGROUP	UG	Ungroup	✅
OVERKILL	—	Remove duplicate geometry	🔶
3DALIGN	—	3D align	❌
3DMIRROR	—	3D mirror	❌
3DMOVE	—	3D move	❌
3DROTATE	—	3D rotate	❌
3DARRAY	—	3D array	❌
SLICE	SL	Slice solid	❌
SUBTRACT	SU	Subtract solids	❌
UNION	UNI	Union solids	❌
INTERSECT	IN	Intersect solids	❌
CHAMFERSOLID	—	Chamfer solid edge	❌
FILLETEDGE	—	Fillet solid edge	❌

---

Dimension

Command	Alias	Description	Status
DIMLINEAR	DLI	Linear dimension	✅
DIMALIGNED	DAL	Aligned dimension	✅
DIMANGULAR	DAN	Angular dimension	✅
DIMRADIUS	DRA	Radius dimension	✅
DIMDIAMETER	DDI	Diameter dimension	✅
DIMORDINATE	DOR	Ordinate dimension	✅
DIMCONTINUE	DCO	Continue dimension	✅
DIMBASELINE	DBA	Baseline dimension	✅
QDIM	—	Quick dimension	✅
DIMEDIT	DED	Edit dimension text / position	✅
DIMTEDIT	DIMTED	Move dimension text	✅
DIMBREAK	DBR	Break dimension line	✅
DIMSPACE	DSPACE	Adjust spacing between dimensions	✅
DIMJOGLINE	DJL	Jog line in dimension	✅
TOLERANCE	TOL	Geometric tolerance	✅
LEADER	LE	Leader line (legacy)	✅
MLEADER	MLD	Multileader	✅
MLEADERADD	MLA	Add leader segment	✅
MLEADERREMOVE	MLR	Remove leader segment	✅
MLEADERALIGN	MLAL	Align multileaders	✅
MLEADERCOLLECT	MLC	Collect multileaders	✅
DIMJOGGED	DJO	Jogged radius dimension	❌
DIMCENTER	DCE	Center mark	❌
CENTERLINE	—	Center line	❌
CENTERMARK	—	Center mark on arc/circle	❌
QLEADER	QL	Quick leader (legacy)	❌

---

Text & Table

Command	Alias	Description	Status
STYLE	ST	Text style manager	✅
DDEDIT	ED	Edit text	✅
FIND	—	Find and replace text	✅
TABLESTYLE	TS	Table style manager	✅
DATAEXTRACTION	—	Data extraction wizard	🔶
DATALINK	—	Link table to external spreadsheet	🔶
FIELD	—	Auto-updating text field	❌
SPELL	SP	Spell check	❌
ARCTEXT	—	Text along an arc	❌

---

Layer

Command	Alias	Description	Status
LAYER	LA	Layer manager	✅
LAYOFF	—	Turn layer off	✅
LAYON	—	Turn layer on	✅
LAYFRZ	—	Freeze layer	✅
LAYTHW	—	Thaw layer	✅
LAYLCK	—	Lock layer	✅
LAYULK	—	Unlock layer	✅
LAYMCUR	—	Make object's layer current	✅
LAYMATCH	—	Match layer of selected object	✅
VPLAYER	—	Viewport layer control	✅
LINETYPE	LT	Linetype manager	✅
LTSCALE	—	Global linetype scale	✅
LAYISO	—	Isolate layer	❌
LAYUNISO	—	End layer isolation	❌
LAYWALK	—	Walk through layers	❌
LAYDEL	—	Delete layer	❌
LAYMRG	—	Merge layers	❌
LAYERSTATE	—	Save / restore layer states	❌
LAYLOCKFADECTL	—	Locked layer fading control	❌

---

Block & Reference

Command	Alias	Description	Status
BLOCK	B	Define block	✅
INSERT	I	Insert block	✅
WBLOCK	W	Write block to file	✅
XATTACH	XA	Attach external reference	✅
XREF	XR	External reference manager	✅
XRELOAD	—	Reload external reference	✅
REFEDIT	—	Edit reference in-place	✅
REFCLOSE	—	Close reference edit	✅
ATTDEF	ATT	Define attribute	✅
ATTEDIT	ATE	Edit attribute	✅
ATTEXT	—	Extract attributes (legacy)	✅
XCLIP	XC	Clip external reference	🔶
BASE	—	Set drawing base point	🔶
BEDIT	BE	Block editor	🔶
BLOCKPALETTE	—	Multi-view block palette	🔶
ATTMAN	—	Attribute manager	🔶
ATTSYNC	—	Synchronize attribute definitions	🔶
MINSERT	—	Matrix block insert	❌
XBIND	XB	Bind xref elements to drawing	❌
XOPEN	—	Open xref for editing	❌
BSAVE	—	Save block in editor	❌
BCLOSE	—	Close block editor	❌

---

3D Modeling

Command	Alias	Description	Status
BOX	—	Box solid	✅
SPHERE	—	Sphere solid	✅
CYLINDER	—	Cylinder solid	✅
EXTRUDE	EXT	Extrude profile	✅
REVOLVE	REV	Revolve profile around axis	✅
SWEEP	—	Sweep profile along path	✅
LOFT	—	Loft between profiles	✅
MASSPROP	—	Mass properties	✅
EXPORTSTEP	—	Export to STEP	✅
EXPORTSTL	—	Export to STL	✅
CONE	—	Cone solid	❌
PYRAMID	—	Pyramid solid	❌
WEDGE	—	Wedge solid	❌
TORUS	—	Torus solid	❌
HELIX	—	3D helix	❌
POLYSOLID	—	Wall-like solid	❌
PRESSPULL	—	Push / pull a face	❌
THICKEN	—	Thicken surface to solid	❌
CONVTOSOLID	—	Convert to solid	❌
CONVTOSURFACE	—	Convert to surface	❌
SLICE	SL	Slice solid with plane	❌
SUBTRACT	SU	Subtract solids	❌
UNION	UNI	Union solids	❌
INTERSECT	IN	Intersect solids	❌
SECTION	SEC	Section plane	❌
SECTIONPLANE	—	Section plane object	❌
FLATSHOT	—	2D view from 3D	❌
INTERFERE	INF	Interference check	❌

---

View & Navigation

Command	Alias	Description	Status
ZOOM	Z	Zoom	✅
PAN	P	Pan	✅
ORBIT	3DO	3D orbit	✅
REGEN	RE	Regenerate drawing	✅
REDRAW	R	Redraw viewport	✅
VPORTS	—	Viewport configuration	✅
MSPACE	MS	Switch to model space	✅
PSPACE	PS	Switch to paper space	✅
MVIEW	MV	Model view in layout	✅
UCSICON	—	Toggle UCS icon	✅
NAVVCUBE	—	Toggle ViewCube	🔶
NAVBAR	—	Toggle navigation bar	🔶
VPJOIN	—	Join viewports	🔶
TOOLPALETTES	—	Tool palettes panel	🔶
PROPERTIES	PR	Properties palette	🔶
SHEETSET	SSM	Sheet set manager	🔶
FILETAB	—	Toggle file tabs	🔶
LAYOUTTAB	—	Toggle layout tabs	🔶
VIEW	V	Named views manager	❌
DVIEW	DV	Dynamic view (legacy)	❌
NAVSWHEEL	—	Steering wheel	❌
RENDER	RR	Render	❌
RENDERPRESETS	—	Render presets	❌
LIGHT	—	Add scene light	❌
SUNPROPERTIES	—	Sun light settings	❌
MATERIALS	MAT	Material editor	❌
VISUALSTYLES	—	Visual style manager	❌
HIDE	HI	Hidden-line regeneration	❌
PLAN	—	Switch to plan view	❌
VPMAX	—	Maximize viewport	❌
VPMIN	—	Restore viewport	❌

---

Inquiry

Command	Alias	Description	Status
AREA	—	Calculate area	✅
MASSPROP	—	Mass properties	✅
QSELECT	—	Quick select	✅
STATUS	—	Drawing status	✅
COUNT	—	Count objects	✅
DIST	DI	Distance between two points	❌
ID	—	Point coordinate	❌
LIST	LI	List object data	❌
DBLIST	—	List all objects	❌
MEASUREGEOM	—	Measure distance / angle / area	❌
QUICKCALC	QC	Quick calculator	❌
CAL	—	Command-line calculator	❌

---

File & Plot

Command	Alias	Description	Status
NEW	—	New drawing	✅
OPEN	—	Open drawing	✅
SAVE	—	Save	✅
SAVEAS	—	Save as	✅
QSAVE	—	Quick save	✅
PLOT	—	Print / plot	✅
EXPORT	—	Export	✅
PAGESETUP	—	Page setup	✅
PLOTSTYLE	—	Plot style	✅
PURGE	PU	Purge unused items	✅
EXPORTPDF	—	Export to PDF	❌
RECOVER	—	Recover damaged drawing	❌
CLOSE	—	Close drawing	❌
QUIT	—	Exit application	❌
ARCHIVE	—	Archive drawing set	❌
ETRANSMIT	—	Transmit drawing package	❌

---

Manage & Customize

Command	Alias	Description	Status
RENAME	—	Rename named objects	✅
LINETYPE	LT	Linetype manager	✅
PLOTSTYLEEDITOR	—	Plot style editor	✅
MLEADERSTYLE	—	Multileader style manager	✅
DIMSTYLE	D	Dimension style manager	✅
AUDIT	—	Audit drawing integrity	🔶
OVERKILL	—	Remove duplicate geometry	🔶
CUI	—	Customize user interface	🔶
CUIIMPORT	—	Import customization file	🔶
CUIEXPORT	—	Export customization file	🔶
ALIASEDIT	—	Edit command aliases	🔶
FINDNONPURGEABLE	—	Find non-purgeable items	🔶
OPTIONS	OP	Application settings	🔶
XBIND	—	Bind xref elements	❌
HYPERLINK	—	Insert hyperlink	❌
DBCONNECT	—	Connect to external database	❌
SCRIPT	SCR	Run script file	❌
APPLOAD	—	Load application (LISP / ARX)	❌
NETLOAD	—	Load .NET plug-in	❌
ACTRECORD	—	Record action macro	❌
ACTMANAGER	—	Action macro manager	❌

---

Summary

Category	Total	✅ Done	🔶 Partial	❌ Missing
Draw	31	20	0	11
Modify	42	30	1	11
Dimension	25	22	0	3
Text & Table	9	6	2	1
Layer	19	12	0	7
Block & Reference	22	11	6	5
3D Modeling	28	10	0	18
View & Navigation	31	10	8	13
Inquiry	12	5	0	7
File & Plot	16	10	0	6
Manage & Customize	21	5	7	9
Total	256	141	24	91