Picker ve ViewCube paper_canvas içinde gömülü olduğundan tümüyle
viewport mouse_area'nın altında kalıyor ve tıklamaları o yakalıyordu.
İkisi de ana view stack'ine, mouse_area'nın üstüne taşındı; aktif
viewport'un ekran dikdörtgeninin köşelerine konumlandırılıyor.
- model picker artık yalnızca model layout'ta gösteriliyor (paper'da
viewport kendi picker'ını alıyor)
- ViewCube hit alanı aktif viewport rect'inin sağ üst köşesinde
- CursorMoved ve ViewportClick, ViewCube hit-test'ini full canvas yerine
aktif viewport rect'ine göre eşliyor; böylece paper'da gizmo ile
tıklama hizalı
- picker/viewcube dışı tıklamalar alttaki mouse_area'ya geçtiği için
viewport içi seçim/çizim etkilenmiyor
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Paper-space'de bir viewport'a çift tıklanıp aktif hale gelince, model
space'deki gibi sol üst köşede render-mode dropdown'ı ve sağ üst köşede
ViewCube gösteriliyor.
- render_mode_picker helper'a çıkarıldı; model space ve aktif paper
viewport ortak kullanıyor (kod tekrarı yok)
- SetRenderMode artık viewport-aware: aktif viewport varsa o viewport
entity'sinin render_mode'unu, yoksa model-layout tab stilini günceller
(Scene::active_viewport_render_mode getter/setter)
- build_viewport_primitive'e show_viewcube parametresi; aktif viewport
primitive'i ViewCube gizmo'sunu çiziyor
- PaperViewportPane shader::Program artık Message'a özelleşti ve sol
tık ViewCube hit-test'ini bounds-relative yapıp ViewCubeSnap üretiyor
Bilinen sorun: picker/viewcube doğru konumda görünüyor ancak tıklamalar
üstteki viewport_mouse mouse_area katmanına gidiyor; katman sırası bir
sonraki adımda düzeltilecek.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Sağ kenardaki dikey orbit/pan/zoom/zoom-extents araç çubuğu tümüyle
kaldırıldı: viewport render'ı, overlay::nav_toolbar fonksiyonu,
show_navbar state + ToggleNavbar mesajı/handler'ı, NAVBAR komutu, View
şeridindeki "Navigation Bar" aracı ve navbar modülü/ikonu. Aynı
gezinme işlemleri komutlar (3DORBIT, PAN, ZOOM*) ve ViewCube üzerinden
erişilebilir durumda.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
NumLock açıkken Numpad8 / Numpad2 logical key olarak ArrowUp / ArrowDown
geliyor ama text "8" / "2" taşıyor. Klavye aboneliğinde ok/geçmiş
arm'ları bu tuşları yakaladığı için dinamik girişte 8 ve 2 yazılamıyordu.
Printable glyph üreten her tuş artık navigation arm'larından önce, text
alanı üzerinden yakalanıyor; whitespace/control üreten tuşlar (Space,
Enter, Tab) named handler'lara düşmeye devam ediyor. Gerçek ok tuşları
(text üretmez) geçmiş gezinmesini korur.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Dinamik giriş artık cursor yanında düzenlenebilir kutular gösteriyor.
TAB ile kutular arası geçilir, bir kutuya yazınca o kutu kilitlenir
(değer sabitlenir), diğerleri cursor'ı takip etmeye devam eder, Enter
ile çözülen nokta komuta point-pick olarak iletilir.
- DocumentTab.dyn_fields / dyn_active state; DynComponent + DynFieldEntry
- sync_dyn_fields komutun dyn_field() + base noktasına göre kutu kümesini
türetir: nokta+base → [d, açı], nokta+base yok → [X, Y], radius → [d],
açı → [açı]
- klavye yönlendirme: rakam/./-/+ aktif kutuya, TAB sonraki kutuya,
Enter try_dyn_commit, Backspace kilidi açar
- dyn_capturing iken command-line text alanı on_input'suz bırakılıyor
ki focus'u ve tuşları çalmasın; girişler global key aboneliğinden
geliyor (numpad dahil text alanı üzerinden yakalanıyor)
- çoklu-kutu overlay render: aktif kutu vurgulu, kilitli kutu farklı
kenar rengi
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
DYN overlay artık ekran-yukarı için world Y'yi (w.y) gösteriyor; eskiden
w.z kullanıldığı için Z-up sahnede top/3D görünümde Y hep 0 görünüyordu
(#27).
Ayrıca overlay etiketi aktif komutun o anki sorusuna göre biçimleniyor:
yeni DynField (Point / Distance / Angle) trait metodu eklendi. CIRCLE
yarıçap adımında 'd=...', ROTATE açı adımında '<...°', diğer nokta
adımlarında koordinat / polar (d + açı) gösteriliyor.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Replaces the binary Wireframe/Solid toggle with a 7-mode dropdown
that maps onto acadrust's `ViewportRenderMode` enum: Wireframe 2D /
Wireframe 3D / Hidden Line / Flat Shaded / Gouraud Shaded / Flat
Shaded + Edges / Gouraud Shaded + Edges. Per-tab state lives on
`DocumentTab::render_mode`; the old `SetWireframe` message forwards
to `SetRenderMode` so the ribbon + WIREFRAME / SOLID command line
keep working.
`scene::render::render_mode_flags()` translates the mode into three
pipeline-facing booleans (`face3d_fill`, `mesh_fill`,
`show_3d_edges`); `mesh_fill` / `show_3d_edges` are stubs that the
upcoming phases will consume. `Primitive` carries the derived
`view_wireframe` plus the two new fields through to `prepare()`.
`Pipeline::upload_face3d` takes a `wireframe_only` flag that drops
3DFACE quad fills (built from `key_vertices`) while keeping the
`all_wires.fill_tris` channel — that channel carries text-LOD greek
rectangles and PolyfaceMesh face triangles which must stay visible
in wireframe mode. 3DFACE edges stay on regardless of mode.
Solid3D mesh wireframe rendering, Hidden Line z-prepass, and Flat /
Gouraud shader uniforms come in phases 1–4.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Type-as-you-go suggestion popup above the input that filters known
command names by substring (so `LEADER` surfaces both LEADER and
MLEADER). Up / Down navigates the list, Enter dispatches the
highlighted entry, clicking a row dispatches directly. Esc on a
non-empty input clears the buffer instead of escalating to
command-cancel.
The name corpus comes from `inventory::submit!` blocks placed next
to each `CadCommand` impl rather than a hand-maintained static list.
Adding a new interactive command means dropping one `inventory::submit!`
line in its own module file — the autocomplete picks it up at the
next compile. 98 submissions seeded across 60 module files;
`command::all_registered_command_names()` flattens them at runtime.
One-shot dispatch arms in `app/commands.rs` (NEW, OPEN, SAVE, UNDO,
…) don't have a `CadCommand` impl and are therefore absent from
autocomplete by design.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The overlay used to keep the last four history lines on screen
indefinitely, leaving stale command output cluttering the viewport.
Stamp each `HistoryEntry` with its `Instant` of insertion and filter
the rows shown on the overlay to entries younger than 3 s.
`CommandLine::has_visible_history()` gates a per-frame tick
subscription so the view re-renders and the entry disappears
on time. The subscription auto-stops once no entry is fresh enough,
keeping the idle CPU draw at zero (#18).
Full history stays in the backing `Vec` — the upcoming dropdown
button will surface it on demand.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The command-line panel used to consume a full-width row at the bottom
of the main column, taking vertical space away from the drawing area
even when no command was active. Move it onto the viewport stack as a
fixed-width 720 px pill aligned to the bottom-centre, with rounded
corners so it reads as a floating element. The status bar still owns
the very bottom of the window.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Two behaviour changes that bring the command line in line with
established CAD workflow:
1. **Always-on keyboard capture.** The input was blurred whenever no
command was running, so typed letters went nowhere until the user
clicked into the field. Replace the blur with a re-focus on every
command lifecycle transition (cmd_result.rs) and on viewport / tab
/ ribbon clicks (update.rs), focus the input at startup, and add
a global key subscription that catches any unhandled character key
or backspace and routes it into the buffer via two new messages
(CommandAppendChar / CommandBackspace) — so the command line keeps
accumulating keystrokes even if focus parks somewhere not
focusable. Removes the unused blur_cmd_input helper.
2. **Space submits.** Typing a space at the end of the input now
submits the buffer the same way Enter does. Only exception: an
active command that's currently collecting free-form prose
(TEXT / MTEXT / DDEDIT body, ATTDEF prompt / default value,
INSERT attribute value, ATTEDIT cell). Those advertise the new
`CadCommand::wants_text_with_spaces()` flag so the Space character
reaches the buffer as a literal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Joining the OpenAEC Foundation (open-aec.com). Crate/struct become
OpenCADStudio, user-facing strings use the spaced "Open CAD Studio"
form, repo URLs point to HakanSeven12/open-cad-studio. Logo (window
icon + assets/logo.svg) redrawn with OCS initials. Drop examples/
binaries — unused.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Wide LWPolyline/Polyline2D fill bands now sit on the centerline:
- polyline_segment_fill arc center matched explode.rs / acadrust convention
(signed d_perp = r·(1-b²)/(1+b²), handles major arcs correctly)
- per-vertex hw0/hw1 taper applied along arc; tess density 24/circle
- synced_hatch_models subtracts hatch_offset from band boundary so it lives
in the same offset-rel space as the wire tessellation
LWDISPLAY:
- new command `LWDISPLAY [ON|OFF]` toggles header.lineweight_display
- LWT status-bar pill (between ORTHO and POLAR) drives the same flag
- bump_geometry() on change so the viewport re-tess immediately
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The update notice dialog now mirrors what GitHub publishes: side-by-side
Installed → Latest version cards (the new one accent-tinted to draw the
eye) and a scrollable release-notes panel under them. Light markdown
rendering covers `##` headings, bullet lists, and inline bold/code
markers — enough for the GitHub release body format we ship.
- update_check::check_for_update() returns UpdateInfo { version, body };
body is parsed from the releases API JSON with a tiny custom
string-field extractor (\n / \" / \u handling) so we keep the
serde_json-free dependency footprint.
- Window grows from 480x240 to 560x460 and becomes resizable to make
room for the notes scroller.
- Layout tightens: header bottom padding drops 14 → 6, notes heading
10, and the notes block is wrapped in a Fill-height container so it
claims every leftover pixel — no more dead space between heading and
footer.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
A pinned "Start" tab now lives at index 0. It cannot be closed, opens
on launch, and replaces the model-space viewport with a welcome page —
similar to Thunderbird's first-run screen.
- Boot opens with only the Start tab; Drawing1 is no longer auto-spawned.
- The Properties left panel becomes a Recent Documents rail on the
Start tab. Recents persist to disk
(%APPDATA%/H7CAD/recent.txt on Windows, $XDG_CONFIG_HOME/H7CAD/recent.txt
on Linux, ~/Library/Application Support/H7CAD/recent.txt on macOS), up
to 20 entries, saved on every open and rehydrated at boot.
Each row opens or removes the file in place.
- The Support ribbon group (Donate / Report / About / Changelog) is
retired; the same actions surface on the welcome page instead. The
Donate button is the primary call-to-action — solid #B03020 brand
fill with a soft brand-tinted ambient glow halo behind the action row
(Thunderbird-style coloured glow against the neutral page).
- Drawing-only overlays (mouse-area, viewcube, navbar, dynamic input,
selection markers) are suppressed on the Start tab so its clicks
don't trigger CAD commands. OpenFile's "current_is_empty" check
refuses to replace the Start tab, and TabClose ignores requests on
it.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
H7CAD was subscribing to window::frames() unconditionally, so iced kept
firing Message::Tick at the display refresh rate even when nothing on
screen was changing. That re-ran update() and the view-tree builder ~60
times a second and showed up as 2-3% idle CPU on Windows.
Gate the subscription on `self.opening.is_some()` (the only thing that
actually needs per-frame redraws today — the file-open progress
indicator). Camera-change detection moves with the events that drive it
since user input already wakes iced.
Closes#18
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds a one-shot update check that runs on app boot and pops up a small
"Update Available" window when the GitHub releases API reports a newer
tag than this build's `CARGO_PKG_VERSION`.
- `src/update_check.rs` — async wrapper around a blocking `ureq` GET to
`api.github.com/repos/HakanSeven12/H7CAD/releases/latest`, returns
`Some(version)` when a newer release exists, `None` otherwise (silent
on network / parse failure so a missing connection never blocks
launch).
- `H7CAD::boot` chains a `Task::perform` next to the main-window open
so the check runs in parallel with first-paint.
- New window plumbed like the other floating panels (page setup, about,
etc.): `update_notice_window`/`update_notice_version` state, title
entry, `OsWindowClosed` cleanup, and a `ui::update_notice::view_window`
modal that shows installed vs. latest version plus "Later" /
"Open Release Page" buttons. Open routes through `open::that` to the
releases URL and dismisses the modal.
Dependency: adds `ureq = { version = "2", default-features = false,
features = ["tls"] }` — the smallest blocking HTTP client + TLS combo
that doesn't drag in an async runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Big DWG/DXF files block the UI for seconds during parse + cache build,
leaving the user wondering whether the app froze. Split the file-open
flow into pick → load and show a modal overlay during the load: file
name, size, phase label (Reading / Parsing / Building caches /
Finalizing), animated indeterminate bar, and Cancel button.
Phase is tracked via a shared AtomicU8 written by the loader thread
and read by the overlay each frame. Cancel hides the overlay and
discards the result; the parser thread runs to completion in the
background since acadrust has no interrupt hook.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Scale popup dropdown replaces cycle behavior; paper-space viewport scale
editable when a viewport is active/selected
- CANNOSCALE persisted via DXF $USERR1 (read on open, write on save)
- PSLTSCALE: linetype dash lengths scaled by viewport anno_scale so dashes
appear uniform physical size in paper space
- MultiLeader: arrow size, dogleg length, and text height scale with
anno_scale; leader line paths (world coords) stay fixed
- Leader: arrow size and hookline length scale with anno_scale; also
corrects world_offset subtraction that was previously deferred to the
TruckObject::Lines path
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implements a full in-app file browser window for Save As, replacing the
rfd dialog that could not expose the selected filter index on Linux.
The new chooser includes directory navigation, a scrollable file list,
filename input, and a format drop-down (DWG/DXF × 2018/2013/2010/2007/2004/2000/R14).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
rfd does not expose the selected filter index, so the old DWG/DXF version
filters had no effect — every file was always saved as AC1032 (R2018).
Replace with a single custom iced Save As window that shows:
- File name text input
- Save-in folder input + Browse button (rfd folder picker)
- Format dropdown: DWG/DXF × 2018/2013/2010/2007/2004/2000/R14
- Save / Cancel buttons
The selected format is passed to save_as_version() which temporarily sets
doc.version before writing, so DwgWriter/DxfWriter emit the correct file
format. Also works in the unsaved-changes Save flow.
Closes#9
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Grip points in paper space now use the 2-D linear to_px transform
(tx/ty/ortho_size) instead of the 3-D view_proj matrix, matching the
coordinate system used by PaperCanvas
- world_offset is no longer subtracted from paper-space entity grip
positions — paper-space coordinates are already unoffset (same rule
as wire tessellation in wires_for_block)
- MTEXT v_offset corrected for all attachment points: CXF glyphs sit
on the baseline and extend upward, so Top attachment needs v_offset=-h,
Bottom needs (n_lines-1)*line_h, Middle is the midpoint of the two
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Opens a floating OS window when the user tries to close a dirty tab or
quit with unsaved changes. The main window stays alive until the dialog
is resolved — Cancel aborts the close entirely. For quit with multiple
dirty tabs the dialog loops through each one individually.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NAVVCUBE: propagate show_viewcube flag through ViewportPane and the wgpu
Primitive so the ViewCube pipeline skips upload/render when hidden.
UCSICON: bare command (no subcommand) now toggles current state instead
of printing usage info.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Integrate NAVVCUBE, NAVBAR, PROPERTIES, FILETAB, LAYOUTTAB, TOOLPALETTES
and SHEETSET commands to toggle UI widgets at runtime. Add 15 new SVG icons
for view module tools previously using glyph fallbacks. Restyle all SVG
icons to use the established two-color scheme: #e0e0e0 for passive geometry,
#4cc9f0 for active/accent elements.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Hide OS crosshair and drawn crosshair when cursor is over ViewCube area
- Enhanced hover glow in WGSL shader (blue tint + brightness boost)
- Fixed region_centroids() Y-axis sign for all FRONT/BACK-related regions
- Swapped corner geometry assignments (TPF↔TBK, BTF↔BBK) to match
intended FRONT/BACK semantics (sy=-1 = FRONT, sy=+1 = BACK)
- Corrected all snap_angles: yaw_pitch_to_quat(0,0) places eye at -Y
(FRONT view), so FRONT=0 and BACK=PI — cascaded through edges/corners
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- paper_limits() falls back to A4 landscape (297×210mm) even when no
Layout object exists in the document
- paper_bg_color default changed to white [1,1,1,1] (paper surface color)
- PaperCanvas::draw() fills canvas with dark desk color first, then draws
the paper area rectangle in paper_bg_color so the sheet is clearly
visible against the desk background
- view.rs container background uses the fixed desk color instead of
paper_bg_color so it no longer conflicts with the paper-surface color
- BACKGROUND RESET for paper space now resets to white instead of dark gray
- Removed unused PaperSheet variant, paper_sheet() constructor,
build_paper_sheet_primitive() and associated match arms (dead code
after 2D canvas replacement)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- viewport_screen_rect now mirrors PaperCanvas::draw()'s camera-based
to_px transform instead of using a fixed paper-limits scale, so the
3D overlay lands exactly over the drawn viewport border at any zoom/pan
- blue border frame (stack layer above the shader) makes the active
viewport boundary always visible even when it fills the canvas
- space-mode pill in MSPACE now dispatches LayoutSwitch("Model") so
clicking it jumps to full Model Space instead of just exiting to PSPACE
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Paper space is now rendered as a 2D vector canvas (iced::widget::canvas)
instead of a 3D shader widget. This allows direct interaction with
paper-space entities (title blocks, viewport borders, annotations)
without needing to enter MSPACE first.
Changes:
- src/scene/paper_canvas.rs: new PaperCanvas<'a> canvas::Program that
renders paper wires (with linetype dashes), solid/gradient hatch fills,
and wipeout backgrounds using the paper camera's orthographic transform.
- Scene: three new public helpers (paper_canvas_wires, paper_canvas_hatches,
paper_canvas_wipeouts) feed the canvas with the same data the old shader
used, including inactive viewport projections and interim/preview wires.
- view.rs: paper_canvas_view() now wraps PaperCanvas instead of
shader(ViewportPane::paper_sheet(…)). The PaperViewportPane 3D shader
overlay for the active MSPACE viewport is unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces the static MODEL/LAYOUT pill with an interactive button that
shows and toggles the current editing context:
Model tab → "MODEL" (non-clickable, informational)
Layout PSPACE → "PAPER" (click → MspaceCommand: enter MSPACE)
Layout MSPACE → "MODEL" (click → ExitViewport: return to PSPACE)
Highlights in blue when in MSPACE to signal active model editing.
Mirrors the AutoCAD status-bar convention for MODEL/PAPER switching.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When a paper-space viewport is activated (double-click / MSPACE command),
it is now rendered through its own dedicated PaperViewportPipeline rather
than the CPU-projection approach used for inactive viewports.
Architecture:
- PaperSheet widget (full-canvas): renders paper entities + CPU-projected
content of all viewports *except* the active one.
- PaperViewportPane widget (Fixed w×h, positioned at viewport screen rect):
renders the active viewport with a true 3D camera derived from the
viewport's view_direction/view_target/view_height.
PaperViewportPipeline is a newtype of Pipeline. Having a distinct type
gives it its own Iced storage entry (keyed by TypeId), preventing the
shared prepare() overwrite that broke the earlier per-viewport approach.
Changes:
- render.rs: PaperViewportPipeline, PaperViewportPrimitive newtypes;
build_active_viewport_primitive(); build_paper_sheet_primitive() now
excludes active_viewport from CPU projection.
- viewport_pane.rs: PaperViewportPane<'a> with shader::Program impl.
- mod.rs: viewport_content_wires() gains exclude_vp parameter;
viewport_screen_rect() is no longer dead code.
- view.rs: paper_canvas_view() overlays PaperViewportPane when MSPACE
is active.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Iced 0.14 batches all shader prepare() calls before any render() calls.
Multiple ViewportPane widgets sharing the same Pipeline type overwrite
each other's GPU buffers, causing the PaperSheet layer (full-canvas) to
render the last viewport's model content — appearing full-screen.
Fix: paper_canvas_view() now renders a single full-canvas PaperSheet
widget. build_paper_sheet_primitive() is updated to include model-space
content projected through each viewport's view matrix (via
viewport_content_wires()), restoring the original working behaviour.
ViewportPane::Paper mode and viewport_screen_rect() are kept with
#[allow(dead_code)] — a per-viewport wgpu sub-renderer that accumulates
data across frames could revive them in the future.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove Scene: shader::Program<Msg> impl; all GPU rendering now goes
through ViewportPane which supports three modes:
Model — full model-space view (unchanged behaviour)
PaperSheet — paper-space entities only, using the paper camera
Paper — model content through a specific viewport's own camera
- Add Scene helper methods (render.rs):
build_primitive / build_paper_sheet_primitive / build_viewport_primitive
update_viewcube_state / viewcube_mouse_interaction
- Add Scene helpers (mod.rs):
paper_sheet_wires() — paper entities without viewport projection
camera_for_viewport() — derive Camera from Viewport entity data
model_wires_for_viewport() — model wires filtered by per-viewport frozen layers
viewport_screen_rect() — paper-space → pixel rect mapping
- Add paper_canvas_view() in view.rs:
Stack of PaperSheet + one Paper widget per Viewport entity,
positioned with Space offsets from viewport_screen_rect()
- Update VIEWPORT_WIDGET_PLAN.md: mark Steps 1–4 done, document remaining work
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- REPORT opens GitHub new-issue page
- ABOUT opens a dialog window with version, OS and arch info + Copy Info button
- CHANGELOG opens GitHub releases page
- Fix Windows build: add windows-sys as target-specific dependency for PRINT command
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Each dialog window (Page Setup, DimStyle, TextStyle, TableStyle,
MLineStyle, PlotStyle, Layout Manager, Shortcuts) is now a proper
window-filling layout in its own src/ui/<dialog>.rs file.
Pattern: toolbar strip at top + vertical separator + scrollable
content filling the rest — no modal card, no backdrop, no stack[].
Matches the existing Layer Manager window pattern.
Removed ~1600 lines of old overlay functions from view.rs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Every dialog panel that previously rendered as an in-viewport overlay is
now opened as its own OS window, matching the behaviour of the Layer
Properties Manager:
• Page Setup (520×460, non-resizable)
• Text Style (620×460)
• Table Style (620×420)
• Multiline Style (620×420)
• Layout Manager (640×320)
• Plot Style Editor (780×540)
• Dimension Style Mgr (720×560)
• Keyboard Shortcuts (720×520)
Changes:
- mod.rs: replace *_open: bool fields with *_window: Option<window::Id>;
add window IDs to OsWindowClosed tracker; add per-window title strings.
- update.rs: Open handlers call window::open(); if already open, call
window::gain_focus() instead of reopening. Close handlers call
window::close(). OsWindowClosed clears all panel window IDs.
- view.rs: each window_id is matched at the top of view() and returns
the panel content directly. All overlay let-bindings and stack![]
references removed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Opens a reference panel listing all built-in keyboard shortcuts
(F3-F12, Ctrl+N/O/S/Z/C/X/V, etc.) and any user-defined overrides.
SHORTCUTS LIST — open the panel
SHORTCUTS SET <k> <c> — add/update a custom shortcut label
SHORTCUTS CLEAR <k> — remove a custom entry
Custom shortcuts are stored in app state (runtime only) and shown
in the panel alongside the hardcoded bindings.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Panel overlay showing all layouts with their active status.
Supports: select, rename, new, delete, reorder (◀▶), set current.
Also adds Scene::swap_layout_order() for tab-order resequencing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Opens a panel overlay showing all 255 ACI entries with their current
overrides (color, lineweight, screening). Allows editing entries
interactively, creating a new identity table when none is loaded,
and saving the modified table back to a CTB/STB file.
Commands: PLOTSTYLEPANEL, PLOTSTYLEEDITOR, STYLESMANAGER
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Viewport right-click now shows a proper widget-based context menu:
- When a command is active: Cancel / Enter
- Otherwise: Repeat last commands, Delete/Move/Copy (if selected),
Select All, Zoom Extents
CONSTRUCTIONLINE added as an alias for XLINE (XL).
Canvas-drawn placeholder removed; context menu closes on Escape,
click-outside, or when any action is taken.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- snap/mod.rs: Snapper gains otrack_enabled, tracking_points, dwell state;
update_otrack_dwell() acquires a snap point after DWELL_THRESHOLD=4
consecutive moves near the same position; otrack_snap() returns an
H/V alignment snap position; clear_tracking() resets state on command end
- overlay.rs: selection_overlay accepts ost_points + cursor_screen;
draws light-blue dashed H/V lines from acquired points + small cross marker
- statusbar.rs: OTRACK pill (F11) added next to DYN
- view.rs: projects tracking_points to screen, passes to selection_overlay
- update.rs: calls update_otrack_dwell + otrack_snap in ViewportMove;
overrides effective point with OST alignment when no normal snap is active
- ROADMAP.md: Object Snap Tracking marked ✅
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- overlay.rs: dynamic_input_overlay() canvas widget draws a semi-transparent
coordinate tooltip near the cursor; shows X/Y in absolute mode or
dist/angle relative to last_point when a command base point exists
- statusbar: DYN toggle pill with F12 tooltip (calls ToggleDynInput)
- app/mod.rs: dyn_input: bool field (default true), ToggleDynInput message
- view.rs: builds DYN label and pushes overlay into viewport_stack when
dyn_input=true and a command is active
- document.rs: last_cursor_screen: iced::Point — updated on every ViewportMove
- ROADMAP.md: Dynamic Input overlay marked ✅
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Grid snap (F9):
• snap spacing now tracks the visible grid zoom level — computed via
compute_grid_step() (same adaptive pow-of-5 logic as draw_grid),
updated on every ViewportMove so zooming in/out keeps snap aligned
with the grid lines on screen
Polar tracking (F10):
• configurable angle increment stored in polar_increment_deg (default 45°)
• right-click the POLAR pill to cycle through 15 → 30 → 45 → 90°
• pill label shows current angle ("POLAR 45°")
• visual guide line: while drawing with polar on, a dashed cyan line is
drawn from last_point along the snapped direction across the viewport
• SetPolarAngle message + handler; all polar_constrain() calls use the
stored increment instead of the hardcoded 45°
ROADMAP updated: Grid snap and Polar tracking marked ✅.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
CommandLine now records every submitted command in a recall list (up to
50 entries). Pressing ↑ in the command input walks back through the
list, ↓ moves forward, and returning to the newest position restores
the draft text the user had typed before navigating.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DocumentTab: bg_color / paper_bg_color Optional<[f32;4]> fields
- view.rs: use custom color when set, fall back to defaults
- BACKGROUND <r> <g> <b>: set model or paper-space background (0–255 RGB)
- BACKGROUND RESET: restore default dark grey / paper grey
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- STYLE DIALOG / TEXTSTYLE DIALOG opens the Text Style Font Browser
- Three-panel dialog: style list | built-in CXF font list | properties
- Properties panel: font file text field, width factor, oblique angle
- Apply button commits edits; Set Current sets the active text style
- Built-in font picker (20 CXF fonts from assets/fonts/) auto-applies
font to the selected style on click
- Preview pane shows "AaBbCc 0123" sample text
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
