#218: with Ortho on and a base point the axis is now a hard lock — a lone
tracking ray can't pull the cursor off it. Only a tracking ray crossing
the ortho axis locks (the corner-finding case); otherwise the ortho
constraint applies as the fallback, so Ortho reliably locks when OTRACK
is also on.
#219: an acquired corner now contributes an alignment ray along its own
edge direction(s) (captured once at acquisition), so OTRACK follows a
segment's extension, not just the ortho/polar axes. Acquisition is also
captured on leave — a perfectly still cursor emits no move events, so
"pause on a corner, then drag" now reliably acquires it. The acquired
marker projects through the active pane's camera + rect (canvas offset
included) instead of vanishing, and the active alignment path is drawn
as a full-length dashed guide through the corner.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extension osnap now offers a ray off every polyline vertex, not just the
first and last, and snaps to where two segments' extension lines would
cross. That crossing is emitted as an Intersection so it outranks the
per-segment extension feet on their own lines. When it wins, both
contributing extensions are re-detected — off-ray distance measured in
screen space so the tolerance holds at UTM coordinates — and the overlay
draws a dashed guide from each endpoint through the crossing, so both
extension paths remain visible instead of vanishing when caught.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rework 3D view navigation:
- Turntable / lock-horizon orbit: horizontal drag yaws about world +Z,
vertical drag pitches about the horizontal camera-right axis, so the
view never banks. Pitch is pole-clamped but the straight-down default
view can still be tilted out of.
- Orbit centre: the selection's centre when something is selected,
otherwise the point under the cursor — no longer only the file centre.
The camera revolves rigidly about the pivot, so it stays put on screen
and the view doesn't jump.
- Mouse scheme: Zoom = wheel, Pan = MMB, Rotate = Shift+MMB. Right-drag
no longer orbits (right-click stays context menu / Enter). Floating
viewports orbit with Shift+MMB too.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The window/crossing selection anchor was stored only in screen pixels, so
zooming or panning mid-drag left it frozen while the drawing moved under
it — the rectangle then covered the wrong world area and selected too much
or too little.
Store the anchor's world point and re-project it to the screen anchor
whenever the model-space view zooms (on_viewport_scroll) or pans
(on_viewport_move), so the rectangle tracks the drawing. The moving corner
already follows the cursor. (MSPACE floating-viewport box-select would
need the viewport camera and is left as-is.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Extension object snap worked but drew no tracking path, so it was
easy to miss — users had to keep the cursor exactly on the invisible
extension line without any visual cue.
When an Extension snap is active, draw a dashed guide line from the
endpoint it extends from, through the snap point and a little beyond,
and orient the three-dot marker along that direction. SnapResult carries
the endpoint screen position (filled once the winning snap is known);
the overlay renders the guide.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Double-clicking a locked object no longer opens its text / attribute /
in-place block editor.
- Clicking a locked object during a command's object-gather no longer
counts as completing the selection (don't set selection_just_completed
on the locked path).
- copy_entities skips locked entities.
- The attribute editor's Apply refuses to write when the block's layer was
locked while the dialog was open.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Locked-layer objects were fully editable. Now they stay visible and
snappable but are otherwise protected:
- Not selectable: the five interactive pick paths (box, lasso, single
click, cycling, box-release) plus SELECTALL and QSELECT skip locked
entities.
- Not modifiable (defense-in-depth even if a handle slips through):
transform_entities, erase_entities, apply_grip and the Properties
commit all skip locked entities.
- Faded: entities on a locked layer render dimmed toward the background
(render_style + wire tessellation); toggling lock re-tessellates.
- Snap still works: locked entities are intentionally kept in the wire
set (visibility_ok untouched), so object snap keeps finding them.
- Feedback: a small padlock is drawn by the crosshair when hovering a
locked object, and clicking one prints "Object is on locked layer …".
New Scene::is_layer_locked / locked_layer_name helpers centralise the
check (mirroring layer_hidden).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Double-clicking a block reference that has attributes, or running ATTEDIT
on one, now opens an editor dialog listing every attribute (tag + editable
value) with OK / Cancel. OK writes the values back to the block, with undo
and a repaint; Cancel discards. A block with no attributes still enters
in-place block edit (REFEDIT) on double-click as before. (#192)
ATTEDIT opens the dialog directly when a suitable block is already
selected; otherwise it runs the pick command and the dialog opens once a
block is chosen. This replaces the earlier command-line, per-attribute
prompt flow, which is removed along with its __ATTEDIT__ sentinel path and
the now-unused attedit_set_attrs trait hook; the ATTEDIT command is reduced
to a plain block picker.
The dialog is a tab-scoped in-canvas modal (Plan B): its working copy holds
a document-local handle, so closing that tab or switching away dismisses the
editor rather than risk applying edits to another tab's document.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The ribbon layer dropdown grew unbounded so a long layer list ran off the
bottom of the screen with no way to scroll. Cap the panel height and make
the list scrollable; short lists still shrink to fit.
While a dropdown was open, the 3D viewport beneath it kept tracking the
cursor over the panel's empty areas, and the OS cursor vanished there. In
iced 0.14 mouse_area/opaque only capture button presses, never CursorMoved,
so a higher stack layer can't swallow motion — gate it state-side instead:
- ignore viewport motion in on_viewport_move while ribbon.open_dropdown is set
- suppress the crosshair overlay's Hidden cursor (and crosshair draw) so the
normal OS cursor shows over an open dropdown
- route all ribbon dropdown backdrops through a shared dropdown_backdrop()
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Opening / navigating a heavy 3D DWG (e.g. a BIM model with ~10k ACIS solids)
was effectively frozen. Several independent costs, all addressed here:
- Face3D edge/fill buffers were re-uploaded on every camera move (keyed on
camera_generation). They are world-space and selection-independent, so gate
them on (geometry_epoch, fill_mode) instead — a pan no longer re-walks every
wire.
- Solid meshes were drawn one buffer + one draw call per solid (~10k draws/
frame), which strangled the GPU front end. Concatenate every solid's LOD0
into a few large buffers (split only to stay under the 256 MB buffer cap) and
draw the whole set in a handful of calls. Built once per geometry epoch, so
selection / hover never re-pack it.
- Selection / hover highlight is now a small tinted overlay of just the picked
solids, drawn last with an Always-depth pipeline so it shows on top even when
the solid is occluded — instead of re-tinting and re-uploading all meshes.
- Hover / pick hit-testing scanned every triangle of every solid each move
(seconds on a heavy model). Add a 3D-AABB screen-rect broad phase
(MeshLodSet now carries z_aabb) and reuse the renderer's cached expanded mesh
set, so picking is O(solids) cheap projections plus the few solids actually
under the cursor.
- Block-internal hatch hit-testing exploded every INSERT on every hover.
Cache the result per geometry epoch and skip blocks that contain no hatch.
- Curved-surface (cone/sphere/torus) tessellation tolerance is now radius-
relative (CURVE_REL_TOL) so a cylinder's facet count is size-independent and
matches the circle/arc wire tessellation, instead of exploding on large radii.
Also adds docs/tessellation.md mapping every EntityType to its tessellation
path (truck B-rep vs truck curve topology vs direct).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replaces the opt-in `rmb_enter` setting (and `RMBENTER` command) with
always-on behavior. While a command is active, the first viewport
right-click acts as Enter (commit / close) and a second consecutive
right-click opens the context menu instead. Idle right-click still opens
the menu; right-drag still orbits.
The cycle is tracked per tab (`right_click_entered`) and restarts on any
other interaction — a left-click pick, a new command, an orbit, or
leaving the viewport — so the next right-click is Enter again.
Refines #185.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a configurable right-mouse-button behavior without disturbing orbit
or the context menu.
- New persisted setting `rmb_enter` (command `RMBENTER [ON|OFF]`, default
off): when on, a right-click while a command is active acts as Enter
(commit/close); when idle it still opens the context menu. Right-drag
always orbits, so nothing is lost.
- Right-click vs orbit is now time-based: orbit engages only after the
button is held >=150ms and the pointer moves, so a quick right-click is
no longer swallowed by slight pointer jitter (was an 8px distance gate).
- The right-click Repeat menu now lists commands from every source
(command line, ribbon, context menu, shortcuts) via a unified
recents list recorded at the dispatch choke point, instead of only
typed commands.
Closes#185
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the custom model_tiles tiling with iced 0.14 pane_grid as the layout
source of truth, while paper-space floating viewports are left untouched (they
overlap/free-place, which pane_grid cannot model).
Each Model pane is its own shader widget rendering its camera into the pane
bounds; the renderer Primitive carries a base_slot so several shader widgets
share the type-keyed MultiPipeline storage on disjoint slots. A second pane_grid
of transparent mouse_areas (plus on_resize) layers above the crosshair overlay
to receive input — the overlay's Hidden cursor interaction otherwise levitates
the cursor and starves any layer beneath it. The active pane follows the cursor
(hover-activate), and grid / crosshair / UCS icon render per pane while the
ViewCube and render-mode picker stay on the active pane only.
Split / close / VPORTS presets and the VPort table round-trip now drive
pane_grid (guillotine reconstruction on load). Adds drag-to-swap via a controls
bar handle with a ghost-card preview, visible pane dividers from the pane_grid
split regions, a default model background of RGB(33,40,48), and removes all the
superseded custom-tile code.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The UCS icon now anchors to the projected UCS origin when it is on-screen
(falling back to the bottom-left corner), and becomes a selectable object:
hover highlights it, a click shows draggable grips, and dragging the origin
grip relocates the UCS while the X/Y tip grips rotate it. Drags snap to
geometry/grid through the existing snapper, and the new UCS is persisted on
release. The icon stays selectable while parked in the corner.
Also make the ViewCube compass (N/E/S/W) world-fixed: the cube body still
reorients with the active UCS, but the cardinals project through a camera-only
rotation and snap in world frame, so the directions no longer spin with the UCS.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Break up the four giant files (~29k lines total) into focused submodule
directories, one concern per file. Pure mechanical moves — behavior is
unchanged.
- app/update.rs (9650) -> app/update/{mod,viewport,command,style,file,
dynamic,dialog,util}. The 384-arm update_inner match stays in mod.rs
with thin delegating arms; the 66 fattest arm bodies move to topic
methods. Arm set preserved exactly (384 -> 384).
- scene/mod.rs (9017) -> scene/{mod,entity,tess,hittest,layout,paper,
mspace,project,selection,modify,group_layer,preview}. The impl Scene
body is split across files via inherent-impl-per-file; struct, ctor,
fields and load-time helpers stay in the root. fn count 123 -> 123.
- app/commands.rs (6082) -> app/commands/* grouped by command family.
The 233-arm dispatch match becomes source-ordered per-family
dispatch_* handlers, preserving first-match precedence (233 -> 233).
- app/view.rs (4686) -> app/view/{mod,overlay,modal,viewcube,controls}.
Largest file drops from 9650 to 3343. Builds clean; app launches and
loads plugins with no panic.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
