ATTMAN and BATTMAN previously produced a command-line listing of block
attributes. Route both to the attribute editor instead: extract the bare
ATTEDIT behavior into a shared open_attedit_dialog helper (edit the
selected block, or start the block-pick command) and call it from the
ATTEDIT, ATTMAN, and BATTMAN arms.
Kept as a match arm rather than an ocad.pgp alias so it works for
existing users, whose config pgp is only seeded on first run.
Replace the listing regression tests with one asserting ATTMAN and
BATTMAN behave byte-for-byte like ATTEDIT.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The paper layout sheet pass reused the full model mesh set, so every
top-level 3D solid piled onto the paper origin — the sheet camera works
in paper coordinates, not model space. Guard `meshes` on
`inst.paper_sheet` the same way wires/hatches/images already are: the
sheet shows only paper-native content; the model's solids render inside
the floating content viewports (model camera + per-viewport scissor).
Also name 3DSOLID/REGION/BODY/SURFACE/MESH/SOLID/MULTILEADER in dxf_name
(they fell through to "ENTITY"), and add a SELHANDLES diagnostic that
reports the active space plus a per-type / per-block selection breakdown.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two follow-ups to ADDSELECTED:
- It no longer permanently changes the current layer/colour/linetype/
lineweight. The template's properties are captured as the drawing
defaults only while the launched draw command runs; a snapshot taken in
cmd_add_selected is restored the moment that command ends (central hook
in apply_cmd_result) or is interrupted by another command.
- Dimensions are supported: add_selected_verb maps each DimensionType to
its DIM* command, and the template's dimension style is adopted as the
current DIMSTYLE (restored afterwards). commit_entity_handle now stamps
every new dimension with the current DIMSTYLE — the DIM commands left the
default "Standard" on the entity, so a normal dimension also picks up
the active style now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Take the first selected entity as a template, adopt its general
properties (layer, colour, linetype, lineweight, linetype scale) as the
current defaults, then start the matching draw command so the object
drawn next inherits them.
Supports Point, Line, Circle, Arc, Ellipse, all polylines (PLINE), Text,
MText, Spline, Hatch, Solid, Ray and XLine; other types report that
creation is unsupported. Registered for command-line autocomplete.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Locked-layer objects were fully editable. Now they stay visible and
snappable but are otherwise protected:
- Not selectable: the five interactive pick paths (box, lasso, single
click, cycling, box-release) plus SELECTALL and QSELECT skip locked
entities.
- Not modifiable (defense-in-depth even if a handle slips through):
transform_entities, erase_entities, apply_grip and the Properties
commit all skip locked entities.
- Faded: entities on a locked layer render dimmed toward the background
(render_style + wire tessellation); toggling lock re-tessellates.
- Snap still works: locked entities are intentionally kept in the wire
set (visibility_ok untouched), so object snap keeps finding them.
- Feedback: a small padlock is drawn by the crosshair when hovering a
locked object, and clicking one prints "Object is on locked layer …".
New Scene::is_layer_locked / locked_layer_name helpers centralise the
check (mirroring layer_hidden).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Double-clicking a block reference that has attributes, or running ATTEDIT
on one, now opens an editor dialog listing every attribute (tag + editable
value) with OK / Cancel. OK writes the values back to the block, with undo
and a repaint; Cancel discards. A block with no attributes still enters
in-place block edit (REFEDIT) on double-click as before. (#192)
ATTEDIT opens the dialog directly when a suitable block is already
selected; otherwise it runs the pick command and the dialog opens once a
block is chosen. This replaces the earlier command-line, per-attribute
prompt flow, which is removed along with its __ATTEDIT__ sentinel path and
the now-unused attedit_set_attrs trait hook; the ATTEDIT command is reduced
to a plain block picker.
The dialog is a tab-scoped in-canvas modal (Plan B): its working copy holds
a document-local handle, so closing that tab or switching away dismisses the
editor rather than risk applying edits to another tab's document.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Six more standard commands by reusing existing infrastructure:
- CLOSE: close the active tab (Message::TabClose)
- HIDE / VISUALSTYLES: per-viewport render mode (Message::SetRenderMode)
- QUICKCALC / QC: alias the CAL arithmetic evaluator
- HYPERLINK <url>: attach a hyperlink via the PE_URL XData record
- XOPEN: open a selected xref's source file (Message::OpenRecent)
COMMANDS.md updated to 214 done / 15 partial / 33 missing of 262.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Integrate a large batch of standard CAD commands and fix several
name/behaviour mismatches, with no product references in code.
3D solids (reusing the truck B-rep pipeline):
- SLICE, INTERFERE, PRESSPULL, POLYSOLID, PYRAMID, SECTION
- 3DROTATE, 3DMIRROR, 3DALIGN (cached-solid transforms)
Annotation / text:
- ARCTEXT, SPLINEFIT (Catmull-Rom to Bezier), DIMJOGGED, OBJECTSCALE
(XData markers honoured by the existing geometry-gen / tessellator)
Blocks / misc:
- NCOPY (block-content extraction via explode_entity)
- OPTIONS, SYNCPVIEWPORTS, THICKEN, plus earlier toggles, aliases,
system variables, and layer/style/view commands
POINTCLOUD/RECAP and UNDERLAYLAYERS/UOSNAP are intentionally left out:
they require a proprietary binary / PDF-layer parser, a GPU point
renderer, and real test files.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Broad pass over the command set: integrate missing commands, wire
previously-unreachable ribbon/menu buttons, and correct name/behaviour
mismatches. Every UI command token now resolves (real handler where the
infrastructure exists, an honest "not yet implemented" status otherwise).
New commands:
- Draw: 3DPOLY, 2D solid (SO/SOLID2D), HELIX, TRACE, SKETCH, DIMCENTER
(DCE/CENTERMARK)
- Modify/inquiry: REVERSE, MEASUREGEOM (MEA), DBLIST
- Data/manage: BASE, OVERKILL (exact-duplicate removal), AUDIT (read-only
integrity report), SETVAR (system-variable get/set), SCRIPT (.scr runner),
FINDNONPURGEABLE
Behaviour fixes:
- LINE and SPLINE gain Close/Undo; AREA computes area/perimeter in f64
(correct at large coordinates)
- ATTEDIT/ATE unified so the alias and the ribbon button open the
interactive editor; -ATTEDIT is the command-line form
- Linear/aligned/radius/diameter dimensions gain a text override (Text) and
text angle (Angle) option
- INSERT gains Scale/Rotate options; COPY gains an Array option
- LINETYPE SET sets the current entity linetype; SETBYLAYER resets overrides
- UNDO accepts a step count
Integrations: standard dimension/block aliases (DLI/DRA/DAN, BMAKE,
EXPORTPDF, DDIM), drafting-aid and screen toggles (GRID/SNAP/POLAR/OSNAP/
DSETTINGS/CLEANSCREEN/QUICKPROPERTIES), viewport tiling
(CASCADE/HORIZONTAL/VERTICAL/VPJOIN), and customization entry points
(CUI/ALIASEDIT).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Break up the four giant files (~29k lines total) into focused submodule
directories, one concern per file. Pure mechanical moves — behavior is
unchanged.
- app/update.rs (9650) -> app/update/{mod,viewport,command,style,file,
dynamic,dialog,util}. The 384-arm update_inner match stays in mod.rs
with thin delegating arms; the 66 fattest arm bodies move to topic
methods. Arm set preserved exactly (384 -> 384).
- scene/mod.rs (9017) -> scene/{mod,entity,tess,hittest,layout,paper,
mspace,project,selection,modify,group_layer,preview}. The impl Scene
body is split across files via inherent-impl-per-file; struct, ctor,
fields and load-time helpers stay in the root. fn count 123 -> 123.
- app/commands.rs (6082) -> app/commands/* grouped by command family.
The 233-arm dispatch match becomes source-ordered per-family
dispatch_* handlers, preserving first-match precedence (233 -> 233).
- app/view.rs (4686) -> app/view/{mod,overlay,modal,viewcube,controls}.
Largest file drops from 9650 to 3343. Builds clean; app launches and
loads plugins with no panic.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
