MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Review follow-ups to #390, which fixed PDF/print text for model space but
left the layout-plot path — the one issue #385 was filed from — broken.
viewport_content_wires rewrote points/snap_pts/key_vertices/aabb and then
cloned text_verts through untouched, so paper-space viewport text stayed at
model (UTM) coordinates: a dimension at model (25000, 12000) plotted its
lines onto the sheet and its glyphs kilometres off the page. A text-only
wire fared worse — TEXT/MTEXT carry no stroke points since text went
SDF-only, so it was dropped outright by the empty-clip and AABB rejections.
Project the glyphs through the same proj_abs the snap points use (via the
existing map_text_verts helper), cull per glyph on the quad centroid, count
them towards the paper AABB, and dim them like the wire colour.
Also in emit_text, which diverged from the wire pass it mirrors:
- divide the pen by `scale`, or a Fit/windowed plot prints text as
near-invisible hairlines while its own lines stay correct;
- apply the CTB plot style, or a monochrome.ctb plot renders the lines
black and leaves the text on its screen colour;
- reset the dash pattern, which is persistent PDF state the wire pass
leaves set — a HIDDEN-linetype last wire printed glyph outlines dashed.
export_table's doc claimed it honoured TEXTFILL and widened the bold pen
itself; it did neither. Gate fill_tris on textfill() so hollow-on-screen
text exports hollow, carry the bold flag and widen the pen by the 1.7x the
bake uses, and resolve Face once per family instead of once per glyph (the
atlas mutex is held for that whole walk).
uv_key identifies a glyph by its tile's uv_min, but grow_height rescales
every entry's V and reset rewinds the packer, leaving already-built quads
addressing the wrong tile — garbage on screen and a silent miss in the
export table, i.e. #385 again under #347's grow-the-atlas conditions. Bump
an atlas generation on both and fold it into the tessellation memo guard so
the text re-lays-out instead. Quads built earlier in the same pass that
grows are still stale for that pass; the guard heals them on the next one.
Tests: the integration test's "some wire has text_verts" assert passed on
pre-fix code too (the exporter ignored them; the scene always carried
them), and its dimension half was satisfied by the TEXT alone — assert per
entity handle instead, and stop colliding on fixed names in the shared temp
root. The unit test's bbox came from the same quads the mapping reads, so
it held by construction; pin the run's own world box instead. That still
cannot catch a mirrored corner assignment — verified by mirroring it — so
say so rather than claim coverage the assert doesn't have.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Command previews (MOVE, COPY, ROTATE, SCALE, STRETCH, MIRROR, ARRAY,
PASTE, INSERT) build ghost WireModels via WireModel::translated/rotated/
scaled/stretched/mirrored, but those helpers moved only `points`, never
`text_verts`, and the ghosts' glyphs were never uploaded — so text
vanished (or froze at its source) during the preview, same root cause as
the grip-drag case.
Transform text_verts alongside points in all five helpers (shared
map_text_verts, reconstructing + re-splitting the double-single world
position), and gather preview_wires' glyphs into the per-frame
preview-text buffer in the render path. This covers every command
preview automatically. The grip-drag else branch no longer sets
preview_text explicitly (the render gather handles it); the grip-slide
fast path keeps its own scene.preview_text channel (empty preview_wires,
so no double-draw).
MIRROR honours MIRRTEXT: on -> true glyph mirror via mirrored(); off ->
readable relocation via translated().
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Root cause: the glyph tessellator advanced the pen by advance*width_factor
while the transform already scales the pen position by the width factor, so
a backward (negative width factor) run kept its word order and grew on the
same side of the anchor instead of mirroring across it. Advance in unscaled
glyph units to match text_local_bounds; the transform applies the factor once.
On top of that:
- The renderer honours the entity's own text-generation flags (DXF 71: bit 2
backward / bit 4 upside-down) XOR the text style's flags, and signs the
horizontal anchor by the width factor so Center/Right backward text mirrors
about its anchor.
- MIRRTEXT on: a MIRROR toggles both group-71 bits so the reflected rotation
renders a true glyph mirror (backward-upright for a vertical axis, flipped
for a horizontal one).
- MIRRTEXT off: the text flips left<->right and lands mirror-symmetric to the
source (right-reading) instead of hugging the axis.
- The MIRROR preview re-derives text ghosts to match the commit; mirrored()
now reflects the double-single residual too.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Computed snaps (midpoint/nearest/perpendicular/intersection/extension/
apparent/grid) reconstructed the snap point from f32 `wire.points`
(absolute high half), so at UTM-scale they landed ~0.5 m off the geometry
while endpoint/center (sourced from f64 key_vertices/snap_pts) stayed
correct. Now they rebuild each vertex from points + points_low (the
double-single low residual) and run the geometry in f64:
- snap() cursor + geometry helpers (nearest_on_segment, perp_foot,
seg_intersect_xy, extension_snap) are DVec3; wp_f64() reconstructs each
vertex; midpoint uses f64 key_vertices directly (was downcast to f32).
- snap callers pass the precise DVec3 cursor.
Snap capture at deep zoom: the wire-AABB cull compared a sub-millimetre
snap radius against f32 bounds quantized by ~1 ulp (~0.7 m at 5.7e6),
wrongly excluding wires under the cursor. Pad the cull by the bound's own
f32 quantization so it never rejects an in-range wire.
Rubber-band previews (line/circle/arc/ellipse/rect/polygon) built f32
absolute points with an empty points_low, so the wire pass (relative-to-
eye) drew them ~0.5 m off the cursor at UTM. Add WireModel::solid_f64,
which splits f64 points into the double-single high/low pair; previews now
track the cursor exactly.
Known: snapping at extreme zoom on large drawings spikes CPU (per-move
snap cost) — deferred.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
WireModel/LocalWire/BatchEntry key_vertices are now Vec<[f64; 3]>;
tessellation keeps them in f64 (no f32 cast at offset subtraction),
producers (dimension, leader, multileader) build them from the acadrust
f64 source, the block-cache transform keeps f64, and the face3d Face3D
quad path splits them into the double-single (high, low) pair. Consumers
(snap endpoint/midpoint, xclip) read via f32 at the leaf. Still
offset-relative (inert); endpoint/midpoint snap is no longer f32-capped.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
WireModel/LocalWire/TruckEntity snap buffers and the producers/consumers
now carry snap candidates as DVec3 (offset_snap_pts, dimension/multileader
producers, block-cache transform, pick/xclip, snap module). Still
offset-relative, so behaviour is unchanged — this just lets the snap
transport survive the upcoming switch to absolute coordinates without an
extra f32 quantization. The snap module still resolves in f32 (as_vec3 at
entry), matching today's precision.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Solids (meshes) now tint on rollover and selection: hover washes orange,
selection washes blue, with selection winning when both apply. Meshes
re-upload their tint when the highlight set changes, and the rollover pick
now also hits shaded solid bodies and hatches (mirroring the click-select
order: wire → hatch → block hatch → solid).
Wires get the same scheme: the selection xray overlay recolours selected
entities blue and the hovered entity orange (previously both blue). Drops
the now-unused highlight_handles union helper and its cache.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Neutralise vendor references in comments to plain behavioural descriptions
(object acquisition / object snap). Remove the PICK_HIGHLIGHT and
PICK_HIGHLIGHT_DIM wire colours: their only consumer was the stripped
storm-sewer add-on, and the retained plugin acquisition pathway draws the
ObjectPick snap glyph and per-command hover previews instead, so the
constants are dead.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Remove accidental dead code (unused imports, the superseded paste tool()
helper, a never-read TORIENT handles field, a duplicate let binding, an
unneeded mut) and mark intentional-but-unwired scaffolding with
allow(dead_code): the web-only save_to_bytes, the plugin loadable() probe,
the planned PICK_HIGHLIGHT colours, the DynFieldSpec label, and the layout
ribbon helpers. Native build is now warning-clean apart from the upstream
nom/quick-xml future-incompat notices.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
