Brings up KiCad's pagelayout_editor (drawing-sheet editor) in the
browser, to roughly the same "boots, canvas visible, partially usable
in-session" level as the existing pcbnew/eeschema/calculator ports.
Build:
- docker/build.sh: add pl_editor to the unified app dispatch (case,
subdir map, all-loop).
- scripts/kicad/build-kicad-target.sh: add pl_editor to the case;
upstream target name pl_editor under source subdir pagelayout_editor.
- scripts/kicad/build-pl_editor.sh: 7-line thin wrapper matching the
pcbnew/eeschema/calculator pattern.
- tests/scripts/setup-kicad-wasm.sh: copy_app pl_editor.
App glue:
- wasm/stubs/nl_pl_editor_plugin_stub.cpp: no-op SpaceMouse plugin so
pl_editor_frame.cpp's NL_PL_EDITOR_PLUGIN symbols resolve. Mirrors
nl_pcbnew_plugin_stub.cpp.
- tests/apps/kicad/pl_editor.html: browser shell. preRun creates
/home/kicad and FS.chdir there so file dialogs land somewhere
friendly instead of MEMFS root (/dev/, /proc/, etc.).
E2E coverage:
- tests/kicad/pl_editor.spec.ts: 5 tests — smoke (canvas, no abort),
wizard, File menu has Open/Save As, file-dialog folder-navigation
regression, canvas + toolbar metrics.
- tests/e2e/filedialog-folder-nav.spec.ts: wxWidgets-level twin of
the regression test (exercises the underlying widget directly via
the standalone filedialog_test app).
Submodule bumps:
- kicad → feature/pl-editor (WASM gating in pagelayout_editor's
CMakeLists + navlib stub).
- wxwidgets → feature/pl-editor (wxGenericFileDialog::OnOk navigates
into selected directories; wasm/mouse.cpp emits wxEVT_LEFT_DCLICK
via timestamp-based double-click detection — the latter benefits
every wxWidgets-WASM app).
See features/pl-editor/ for the design doc + per-repo diff patches.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Convert the calculator port (commit 0464470) from the parallel/copy-paste
pattern to the dispatch pattern used by pcbnew + eeschema.
- docker/build.sh: <app> is now required (no pcbnew default); missing,
unknown, and --help paths all print "pcbnew | eeschema | calculator | all".
Adds calculator to build_app() via kicad_subdir_for() (pcb_calculator
inner subdir, calculator.* output basename). Also fixes the
EMSDK=/emsdkkicad-wasm-builder typo that snuck in during the calc merge.
- scripts/kicad/build-kicad-target.sh: accepts calculator; introduces
KICAD_TARGET (pcb_calculator for calc, == APP_NAME otherwise) used for
the make target, embind include path, and final-log line.
- scripts/kicad/build-calculator.sh: 305-line copy of build-pcbnew.sh
collapsed to a 7-line wrapper around build-kicad-target.sh.
- tests/scripts/setup-kicad-wasm.sh: copy_app calculator added with the
same pcb_calculator subdir mapping for the docker-volume fallback path.
- tests/package.json: test:calculator* routed through the shared
playwright-kicad.config.ts kicad/calculator.spec.ts (mirrors eeschema).
- Delete: docker/build-calculator.sh, tests/scripts/setup-calculator-wasm.sh,
tests/playwright-calculator.config.ts.
Bumps wxwidgets d1d1627 -> 6fb2eac (origin/wasm-port). The new sha includes
"unic/combobox: add GetCurrentSelection() inline default" which calc's
kicad/pcb_calculator/widgets/unit_selector.cpp needs to compile. Without
this bump the unified dispatch would expose calc as a buildable target but
the build itself would fail. Verified: build.sh all completes clean across
all three apps; pcbnew/eeschema e2e pass; calc compiles and launches (test
stability separate from this refactor).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
A clean dependency build failed immediately at the GLM step with
`unzip: command not found`. build-glm.sh extracts glm-0.9.9.8.zip with unzip,
but the Ubuntu-based image (introduced when the emsdk image was replaced) never
installed it. Add unzip to the apt-get list.
Verified: GLM, zstd and protobuf now build and stamp, and the deps build
proceeds into boost.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The wxWidgets autoconf build inside Docker failed with `emmake: command not
found` on a clean build, while the KiCad CMake build survived (CMake caches the
absolute compiler path). Two compounding causes:
1. `docker compose exec` bypasses the ENTRYPOINT, so it never sourced
emsdk_env.sh and EMSDK was unset. env.sh then fell back to the local
tools/emsdk.
2. The entrypoint's rsync from the host bind mount excluded only build-wasm and
output, so the host's macOS-arm64 tools/emsdk got copied over the container's
Linux emsdk. The macOS Mach-O python can't exec on Linux, so
`emsdk construct_env` failed ("Exec format error") and emcc/emmake never
landed on PATH.
Fixes:
- Set `ENV EMSDK=/emsdk` in the image so every process (including
`docker compose exec`) resolves env.sh's EMSDK branch to the container's own
emsdk and never falls back to tools/emsdk.
- Exclude `tools/emsdk` from the entrypoint rsync so the host emsdk can no
longer leak into the container.
Validated with a clean wxWidgets build (`build-wxuniversal-wasm.sh --clean`):
reconfigures and compiles all 42 wx libs against /emsdk with no missing-tool
errors.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The Docker build used emscripten/emsdk:4.0.2-arm64 as base image but
env.sh couldn't find emsdk there, installing a second copy. The build
then applied wasm-opt/finalize stubs to the wrong emsdk (hardcoded
/emsdk/), so the real wasm-emscripten-finalize ran in Docker and got
OOM-killed.
- Use ubuntu:22.04 base with emsdk installed from source at /emsdk/
- Make stub paths dynamic via $EMSDK instead of hardcoded /emsdk/
- Skip local emsdk install in env.sh when $EMSDK is already active
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Emscripten 4.x removed dynCall_* WASM exports, breaking asyncify
rewind through indirect calls (modal dialogs, event handlers).
Generate JS shims that track Asyncify.exportCallStack and register
in wasmExports so doRewind can find them.
Also fixes empty callback functions ((() => {})) generated by
Emscripten 4.x + pthreads for HTML5 events, pthread entry,
sighandler, async timer, and main loop callbacks.
Build pipeline improvements:
- Stub wasm-opt/finalize in Docker (RAM limits), run on host
- Add setup-emsdk.sh for reproducible Emscripten setup
- Simplify env.sh and version management
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Migrate WebGL GAL implementation from tests/gal-regression/wasm/webgl/
to kicad/common/gal/webgl/ and kicad/include/gal/webgl/.
This integrates the WebGL GAL properly into KiCad's build system:
- Update test Makefile to use sources from kicad/ instead of local copies
- Update build scripts for new source locations
- Add test-gal-webgl.sh script for running WebGL regression tests
- Update Docker to Emscripten 4.0.22
The WebGL GAL passes all 28 regression tests (matching baseline).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace timestamp-based rsync + touch with checksum-based sync:
- Use --checksum to only transfer files with actual content changes
- Remove touch mechanism that caused all files to appear "newer"
- Exclude .git, logs, .idea, node_modules from sync
The old approach created a perpetual timestamp mismatch:
1. rsync -a preserved host timestamps
2. touch set container timestamps
3. Next build saw mismatch → transferred everything → touched again
With --checksum mode:
- Changed files: transferred with current time → rebuilt (correct)
- Unchanged files: not transferred → keep timestamp → no rebuild (correct)
Tested scenarios:
- Consecutive builds: ~2 min (cached) vs ~6+ min (was full rebuild)
- Modified wxWidgets file: only that file recompiled
- Modified KiCad file: only that file recompiled
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Restore missing elementtracker.h in wxWidgets (required for E2E tests)
- Add automatic log file redirection for build scripts
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- README.md: Add Quick Start section with full build sequence
- docker/README.md: Document branch-specific builds with git worktrees
- docker/build.sh: Use branch name for COMPOSE_PROJECT_NAME
- docker/docker-compose.yml: Remove hardcoded container_name
Each branch now gets isolated Docker containers/volumes, enabling
parallel development across git worktrees.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Build images.tar.gz bitmap archive for KiCad icons
- Fetch resources at runtime via HTTP instead of bundling in WASM
- Write to Emscripten virtual FS at compile-time KICAD_DATA path
- Fix rsync timestamp handling for correct make change detection
- Update kicad submodule with WASM settings manager fix
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add rsync-based source sync for Docker builds to fix macOS VirtioFS
timestamp inconsistencies that caused autoconf sanity checks to fail
- Add config.sub wrapper (SHELL/CONFIG_SHELL) to support emscripten/wasm32
targets without modifying submodule files
- Fix protobuf build to use native gcc/g++ for protoc instead of Emscripten
- Add python PATH fix for macOS (Homebrew's python3 symlink) in wxWidgets build
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Build improvements:
- Change -O0 to -O1 to fix "local count too large" asyncify error
- Add wasm-emscripten-finalize to host (Docker OOMs on large WASM)
- Use -gseparate-dwarf for smaller main binary with debug info
- Build native protoc for code generation
- Add more functions to asyncify removelist
Runtime fixes:
- Add inject-dyncall-shims.sh to fix "dynCall_* is not defined" in Emscripten 4.x
- Update wxwidgets with browserInfo.name fix
New stubs and bindings:
- Add Embind bindings for JavaScript interop
- Add stubs for scripting, API plugin, PCB frame, navlib
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The KiCad WASM build was freezing during initialization due to a pthread
deadlock. When hardware_concurrency() > PTHREAD_POOL_SIZE, new Web Worker
creation requires the event loop, but the main thread busy-waits blocking it.
Changes:
- Use navigator.hardwareConcurrency for PTHREAD_POOL_SIZE in KiCad build
- Add threadpool test to reproduce and verify the fix
- Add single-target build support to build-wasm-test.sh
- Default docker/build.sh to -j 10 for faster builds
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Move asyncify from Docker to host to avoid memory issues
- Auto-download Binaryen v121 (v125 has regression bug)
- Use -O1 for debug builds (V8 local count limit)
- Remove asyncify flags from linker (handled by wasm-opt)
- Document two-phase build in build.md
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Build fixes:
- Enable C++ exceptions in wxWidgets (--enable-exceptions, -fexceptions)
Required for KiCad's OnExceptionInMainLoop override in debug builds
- Add -matomics -mbulk-memory to all dependency builds for shared memory
Required for pthreads support with Emscripten
- Fix docker/build.sh output copy path (pcbnew/ not bin/)
- Make workspace mount read-only in docker-compose.yml
Updated dependency scripts:
- build-freetype.sh, build-harfbuzz.sh, build-protobuf.sh
- build-zstd.sh, build-opencascade.sh, build-boost.sh
- build-pixman.sh, build-cairo.sh (meson cross-file)
- build-wxuniversal-wasm.sh, build-pcbnew.sh
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add build.md documentation for the WASM build system
- Default to debug builds with -gsource-map for WASM debugging
- Add --release flag to disable debug symbols
- Add --clean flag for full rebuild (deps + wxWidgets + KiCad)
- Add -j N flag for parallel compilation (default: 1 for sequential)
- Update Docker memory limit to 32GB
- Propagate DEBUG_BUILD and JOBS to all dependency scripts
Build modes:
- ./docker/build.sh --clean -j8 (full rebuild, parallel)
- ./docker/build.sh (rebuild KiCad only)
- ./docker/build.sh --no-clean (incremental)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
