Live-app fix (Place Footprints / routing dead in Chrome): submodule
bumps carry the coroutine ownership fix (kicad 012d95ecb4) and the
handler-exception survival fix (wxwidgets 1b5f0e31f4).
Emscripten-6 fallout:
- occ/ngspice worker wrappers: mainScriptUrlOrBlob was removed
upstream; pthread children re-run the wrapper blob, so an em-pthread
realm now importScripts the glue and gets out of the way (before:
recursive service boots, pool never fills, silent 180s boot hangs —
every occ spec and ngspice bg_run).
- Makefile.wasm: -sASYNCIFY frankenlinks on the no-wx coroutine repro
targets ported to -sJSPI (the JSPI-only libcontext crashed at first
yield under them); mainloop/gl repro pages drive their tick through a
promising export (emscripten_set_main_loop callbacks cannot suspend);
retired inject-dyncall-shims lines removed (targets were unbuildable
since Phase 8); $stringToNewUTF8 force-included (the EM_ASM value
bridge aborted the runtime on the first decoded exception).
- fiber-park levers: neither embind shape can drive suspending levers
(plain throws on strict-JSPI Firefox; emscripten::async() re-executes
its invoker on settle) — kept sync for manual Chromium probing, spec
coverage moved to the jspi-coroutine harness (18 cases).
Suite work:
- Playwright 1.61.1 -> 1.62.1 (Firefox 153: JSPI on by default).
- fiber-resume-park.spec retired -> coroutine-lifecycle.spec: census
gate over boot / board load / chooser open / cancel (deterministically
red on the pre-fix build).
- Blind asyncify-era pins re-keyed: quasimodal-strand + wait-beacons
beacon regexes, footprint-chooser-close liveness -> wx parking-timer
heartbeat (scheduler counters idle flat on Firefox).
- occ/ngspice test providers: 60s boot timeout + worker error
surfacing (a worker death used to be a silent 180s timeout).
- Harness pages: stale 9.99 config dir -> 10.0 (library_manager wxCHECK
noise, chooser had no libraries).
- gal-webgl harness: missing artifacts rebuilt (boost/glm extracted to
the host sysroot), PgmOrNull stub added for the rebased GAL.
- jspi-scheduler: clean-shutdown console line restored (app-quit
contract), quarantine never yanks SP from a live window.
Gates: test:e2e 699 passed / 0 failed (wx-chromium, kicad-firefox,
kicad-chromium, jspi-firefox, coroutine-firefox); web ff/cr/mobile 71
passed; lint:ci-coverage 166, lint:determinism 163, screenshots
manifest 492 current, corpus 7/7, tools:contract green. Offline
screenshot baselines show expected mass drift from the engine bump —
re-baseline (screenshots:noise -> promote) is a follow-up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
Squash of experiment/ff-big-modules vs main.
Big-module routing removed: native-EH shrank kicad_editor below
SpiderMonkey's x86-64 code budget (runs 29355049705/29356152413 green on
stock Firefox), so BIG_MODULE_SPECS routing and the baseline-only-JIT
crutch are gone — kicad-firefox and kicad-chromium both run the full
suite, with the module compiled the way real users' browsers compile it.
Per-engine screenshots end to end: stableShot/shotPath write
test-results/<engine>/<name>.png; baselines move to
baseline-screenshots/{chromium,firefox}/ and the whole tools/screenshots
pipeline (compare/promote/manifest/spec-map/changelog/Discord) keys on
<engine>/<name>. Previously Firefox and Chromium renders of one spec
overwrote each other and Firefox renders were never actually gated.
Seeded from CI run 29421380806 (92 new firefox baselines, +24 chromium
web-suite shots); manifest generated from the baseline tree.
One merged playwright.config.ts (kicad/asyncify/coroutine/perf as
projects); ~25 dead npm scripts dropped. The web suite is gated in CI for
the first time ever (4 rotted specs fixed, 5 broken lib-bridge specs
triaged as fixme in docs/features/web-e2e-rot/); cheap lint step after
npm ci; last 26 blind-sleep violations fixed.
SwiftShader retired: CI Chromium renders WebGL on ANGLE → Mesa llvmpipe
(--use-gl=angle --use-angle=gl --ignore-gpu-blocklist; the blocklist flag
is mandatory — llvmpipe is blocklisted and WebGL is silently unavailable
without it) in BOTH configs. Under WORKERS=4 congestion SwiftShader
transiently failed the first post-board-load draw and the recovery
cascade ended in a silent permanent Cairo fallback — that engine flip was
the "~1.2% changedRatio both directions" occ-export baseline flake.
Validated 160/160 across two 80-repeat rigs; full analysis in
docs/features/wx-parity-bugs/occ-export-context-eviction.md. Chromium
baselines shift slightly on llvmpipe — promote once from the first green
run. Deflakes the new coverage exposed: presence baselines settle before
capture; presence fixtures declare current file formats; perf gets its
own outputDir so CI evidence survives; occ-export settles the board paint
before the export dialog; menu-item waits (waitForRenderedByLabel before
clickMenuItem) in 4 specs + the TESTING.md rule.
Web suite runs the PROD build, in parallel: webServer becomes backend
`start` + the standalone's e2e:preview (build-preview.mjs: link-wasm →
stash the public/wasm symlink aside during vite build, build-demo.mjs's
move — then vite preview as the persistent server). The wasm middleware
serves /wasm/* in preview and emits COOP/COEP/CORP itself (a pthread
worker script's own response must carry COEP or Chrome kills it with
ERR_BLOCKED_BY_RESPONSE). VITE_* flags bake at build time;
VITE_ALLOW_USER_OVERRIDE joins turbo globalEnv. fullyParallel + default
workers: 5.2m → 1.4m. Determinism fixes the parallel run exposed:
shared-page specs become serial groups; locks.spec grabs alice's exact
item via the new kicadCollabTestSelectByUuid hook (cross-tab "first
footprint" order is not a ysync invariant); quit specs poll page.url()
(quit supersedes its own navigation — NS_BINDING_ABORTED on Firefox).
Suite: 51 passed / 12 skipped / 0 failed in 1.6m.
CI-coverage gate (lint:ci-coverage): every tests/**/*.spec.ts must be
reachable from the npm scripts the workflows invoke — scraped from
.github/workflows/, resolved through package.json, coverage asked from
playwright --list itself. Rules: uncovered-spec + orphan-project (with a
documented LOCAL_ONLY_PROJECTS allowlist). Gating next to
lint:determinism; 138 spec files / 13 projects accounted for.
Product fixes kept from the investigations (reachable on real GPUs too):
wx 7799fd1be5 — paint flags clear before dispatch + Invalidate always
propagates; kicad 3dcfea5e45 — SwiftShader pass-boundary flush +
per-instance font texture + first-frame GL-error drain (GAL recovery
recovers instead of falling back to Cairo) + the user-facing eeschema
switch navigates again under __EMSCRIPTEN__ (project-sync's
FaceRegistered gate had rerouted it into the hidden sync player; caught
by the newly-gated web suite).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018eUxiPApHgGiu9NFyQfhAq
T4: kicad-binding.test.ts — revertNonce → DOC_REVERTED_EVENT dispatch via a
window stub (once per nonce; stale marker on open silent; observer gone
after destroy). T6: tests/tools/cli-contract.ts (npm run tools:contract,
skip-when-unbuilt): resave version bump + relint clean for board/schematic/
hierarchy/footprint (the CTL_FOR_LIBRARY version-header regression), exit
codes 2/4/1 — the exact contract run-tools-job.ts keys off. 15 checks
green. Also bumps pcbjam-shared (T3 unit tests).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HLua64PCVwkQ1hpWdaf1Gm
Chrome visibility is now a runtime toggle on any device instead of being
device-wired: mobile defaults to canvas-only, desktop to full UI, and the
floating top-right button (or Figma's Cmd/Ctrl+\ chord — free in KiCad,
only bare \ is bound) flips between them live.
- chrome-visibility.ts: module-global store (default isMobileMode(),
session-only) + pure hotkey matcher (rejects AltGr backslash + repeats)
- WasmTool: capture-phase hotkey (stopped before the wx layer), floating
toggle pill (matches the comment FAB design), useLayoutEffect apply with
sync first call + retry; overlays follow the toggle, capability-gated on
the kicad_editor bundle's kicadSetChrome export
- boot.ts mobile opt now installs touch gestures only
- kicadSetChrome: frame-keyed hide-time snapshot so restore re-shows ONLY
what hide took away (blanket Show(true) surfaced KiCad's default-hidden
Search/Properties/Net-Inspector panes); toolbars-only fallback otherwise
- tests: chrome-toggle.spec.ts (desktop hide/restore + geometric
restore-exactness ±3px), mobile toggle round-trip, 12 new unit tests,
test:web:mobile npm script
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Make the Playwright e2e + kicad suites deterministic so screenshot flake stops
tracing to timing races.
- Blind page.waitForTimeout -> condition waits (expect.poll, web-first
assertions, waitUntil) + readiness helpers (waitForWxApp, waitForCanvasApp).
Remaining sleeps are documented interaction dwells (annotated).
- Defensive "if element exists" branches -> loud asserts; label-fallback chains
-> normalized clickMenuItemByText. First-run wizard for/if loops removed by
seeding calculator/gerbview/pcbnew HTMLs.
- Screenshots: new stableShot(page, name) settles the render in-page (canvas
hash over rAF) then writes a raw PNG to test-results/ for the existing offline
gate (tools/screenshots vs baseline-screenshots). Replaces toHaveScreenshot,
which did inline compare + its own baselines and had decoupled the specs from
the real gate. scale:'css' pinned.
- retries: 0 in both configs.
- Guard: tests/tools/lint-determinism.ts (npm run lint:determinism) bans blind
sleeps / toHaveScreenshot / inline retries / swallowed catches in specs;
documented exceptions carry a marker. Rules in tests/TESTING.md.
Assertions, coverage, and renders unchanged (semantic-equivalence reviewed;
captures pixel-identical modulo inherent timer/timestamp/3d-raytrace variance).
Both suites green at retries:0 (e2e 340, kicad 92); ~35-61% faster.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVX1pHMvRPYHdp6ZfEawrk
The 3d-webgl merge (kicad eb13ff3bdc: the viewer now defaults to the real
OpenGL renderer via wasm/gl1, and occ-split moves STEP parsing into the
occ_service worker) made the raytracer-era orchestration on this branch moot —
main's chromium-ci phase is green at 15-way parallelism (28666407570 /
28698861536). Drop what no longer earns its complexity, keep the diagnostics,
fix main's live flake, and make the deadlock spec test what it was written for.
- REVERT the chromium-ci-3d serial project, the two-phase test:kicad:ci, the
SwiftShader GPU-process flags, and the resize-drag/models skips: config and
package.json are byte-for-byte back to main's shape. The raytracer contention
they guarded is no longer on the CI path.
- FIX main's live flake: run 28698861536 is green only via retry
(3d-viewer.spec:26 flaky) and 28666407570's deadlock red sampled an ALL-ZERO
pixel signature — the viewer's first frame lags the canvas's creation on
software WebGL under parallel load, and sampling too early reads an all-black
backbuffer. New waitForThreeDRender() gates render assertions on actual
pixels (1s-interval full-frame CPU reads) instead of fixed sleeps, used by
3d-viewer.spec:26 and the models render tail.
- KEEP the storm-proofed samplers (one full-frame getImageData on a
willReadFrequently canvas replacing 256 per-pixel GPU round-trips per sample
— the "GPU stall due to ReadPixels" trigger) and the logThreeDDiag
instrumentation: engine-independent, and they de-risk every remaining
software-GL pixel read.
- models spec: bridge assertions stay front-loaded (the protocol regression
signal is independent of the render); the occ_service parse verdict is now
POLLED — it lands async relative to the bridge ensures, so asserting it
immediately raced the worker; the render tail runs again everywhere. (The
pre-webgl raytracer+models renderer-death documented in a17f3be does not
affect the OpenGL default path — the raytracer-toggle+models combination
remains untested product surface, tracked outside this branch.)
- deadlock spec: the deadlock it guards is raytracer-specific and the viewer
now defaults to OpenGL — on the GL engine it either passes vacuously (fast
renders make every liveness assertion trivial, 28698861536) or fails on the
black first frame (28666407570). It now flips the engine via the "Use
raytracing" toolbar toggle (loud assert if the toggle moved) and
cross-checks engagement by requiring the canvas pixels to CHANGE after the
flip with no input in between (the raytraced frame is lit differently; a GL
re-render reproduces identical pixels; heap growth is unusable — mimalloc
satisfies the raytracer from freed arena pages). That guard immediately
caught a REAL defect: on the webgl-era wasm build the toggle is INERT (the
click lands and "Reload time" updates, but the canvas never changes —
suspects: DoRePaint's silent catch(runtime_error) freezing the canvas after
a raytracer Redraw throw, or ToggleRaytracing writing m_boardAdapter.m_Cfg
while RenderEngineChanged() reads GetAppSettings<…>(), possibly different
instances in the merged bundle). The spec is therefore test.skip-annotated
as a KNOWN ISSUE with the full engine-force machinery in place — unskipping
it self-validates the product fix. The CI-skip also stays (raytracer
liveness needs real-GPU pacing; the Worker-boot deadlock mechanism is
covered on CI by the standalone wx harnesses).
- 180s viewer-open waits kept as pure CI headroom (never slow a passing run).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The three heavy 3D-viewer specs (3d-viewer, 3d-viewer-deadlock, 3d-viewer-models)
crashed on CI (run 28604015154): "Target crashed", "browser has been closed", and a
black frozen canvas. Each boots the 3D-enabled pcbnew build, which pre-warms
~hardwareConcurrency*2+8 (~68 on the 30-core VM) Web Workers AND runs a multi-threaded
CPU raytracer over SwiftShader software-WebGL. Under fullyParallel the three spec FILES
run in separate browser processes concurrently, and the simultaneous raytrace tabs
exhaust the shared GPU process's ~16 live-WebGL-context limit / renderer memory. The
pool pre-warm (the deadlock fix, 7630c7e) is correct and present in the tested binary;
per-file isolation prevented in-process Worker accumulation but NOT this cross-process
concurrency — the gap these specs' first CI exposure hit.
Fix (test-orchestration only; no wasm/submodule changes):
- Route the three specs to a dedicated `chromium-ci-3d` Playwright project (own
outputDir=pw-artifacts/kicad-3d so its failure traces survive the later perf run's
wipe; the existing tests/pw-artifacts/** upload already captures it).
- test:kicad:ci runs it as a SECOND `playwright test` pass with --workers=1, so at most
one raytrace tab is alive at a time (the environment in which a single 3D load is
reliably green — docs/features/3d-raytracer/README.md §7). An exit-code-aggregating
sequencer runs both phases and fails if either fails (no silent skip of the 3D pass).
- Cap phase-1 CI workers to 12 as headroom under the WebGL-context cap.
- Log a resource-diagnostic snapshot (hardwareConcurrency, pthread pool, GL-canvas
count, wasm/JS heap) before each 3D interaction so any recurrence is attributable.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
compare-dirs gains --artifacts changed|always: 'always' also writes the
side-by-side triptych + heatmap for pairs that PASS the floor (blue-grey
UNCHANGED caption), so a human can eyeball old-vs-new without a failing
gate. The gating scripts keep the default (empty diff dir = green);
3d:review writes the full 47-pair set to output/diff/parity-review/.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
tests/3d-regression mirrors the gal-regression pattern at renderer scale:
shared C++ scenarios call real KiCad 3D-viewer code (opengl_utils, display
lists + DrawCulled stencil subtraction, MODEL_3D VBOs, private generators via
a rob-template accessor, and full reload()+Redraw() composites over a
synthetic BOARD_ADAPTER). A native macOS harness renders them on real OpenGL
into 47 committed goldens (bit-deterministic, FBO capture); the wasm harness
compiles the same TUs against wasm/stubs/gl_ffp_stub.c no-ops so every
scenario renders blank — the TDD red state (parity meter: 47/47 changed).
Comparisons use the CI pixelmatch engine via the new generic compare-dirs.ts
(floors.json levels; manifest.json cmp-guards registry drift).
Documents an upstream bug: appendPostMachiningGeometry's countersink path
adds middle quads without normals, silently erasing the walls of any
display list it is batched into (3d-post-machining.png keeps the lists
separate to record it).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New tooling in tests/tools/screenshots/ (TypeScript via tsx):
- compare.ts: one pixelmatch engine (AA-excluded), connected-component
"where to look" boxes, old|new+boxes|heatmap triptych, per-engine floors.
- promote.ts: churn-free updater — overwrite a baseline only when decoded
pixels differ beyond the floor, copying CI bytes verbatim (no re-encode
churn); pulls a CI run via `gh run download` or a local --from dir.
- post-discord.ts: always-on CI-on-main report (SHA + e2e status + the
track-only runtime-perf table), then screenshot triptychs, batched +
size-capped + flood-collapsed + 429-aware.
- perf-report.ts: perf table with Δ vs the previous main run (via gh).
- changelog.ts: no-build git-history baseline differ (Discord trigger B).
- noise.ts / gen-manifest.ts: calibration + manifest generation.
CI wiring:
- wasm-build.yml: post-test step runs the gate + report on the already-
produced test-results (no extra build); report-only (continue-on-error),
posts only on push to main, inert without DISCORD_WEBHOOK_URL.
- ci-ubicloud.yml: secrets: inherit (pass the webhook through).
- screenshot-changelog.yml: ~30s no-build changelog on baseline changes.
screenshot-manifest.json: canonical 354-name set + best-effort engine tags
(313 chromium-swiftshader / 41 firefox-llvmpipe).
Normalize scale:'device'->'css' across 18 spec files (no-op at CI DSF=1)
so committed baselines are uniformly css-scaled.
Design: CI's Linux render is the single source of truth; no pinned
container (accept rare env drift -> re-promote); dev commits via promote.
Replaces the byte-cmp compare-screenshots.sh + file-size-proxy
update-baseline-screenshots.sh (kept for now until the first re-baseline).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Measures the current build's cold load, open+render, and pan/zoom FPS
(1x/4x/6x CPU-throttle sweep) for both editors, writing
tests/test-results/perf-*.json. Track-only: asserts only that the app booted
and the document opened — no perf thresholds, so it never gates CI.
Runs on a new Chromium `perf` Playwright project (CDP throttling; pcbnew needs
V8 anyway) via `npm run test:perf`, and is wired into wasm-build.yml as a
continue-on-error step so the numbers are captured/uploaded without flaking the
gate. Reuses the existing fixtures, ready-signal, fs-inject, and board-ready
helpers; FPS counter is cancel-able so a throttle sweep on one page doesn't
accumulate rAF loops.
.gitignore: ignore /benchmark-builds/ (disposable prebuilt-WASM + standalone
harness bundle used to reproduce the native-vs-JS-EH comparison locally).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the legacy Emscripten JS-exceptions model with native wasm-EH (legacy
encoding) across the whole build, keeping Asyncify coroutines working via a
from-source Binaryen --hoist-cpp-catches pre-pass. Net result: native-EH is the
only build mode, the 3D viewer is on by default, and pcbnew shrinks substantially.
Highlights:
- Binaryen submodule everywhere + --hoist-cpp-catches integration in apply-asyncify;
post-link Asyncify covers every app wasm (not just standalone test wasm).
- Build deps (incl. OpenCASCADE without OCC_CONVERT_SIGNALS) and all KiCad apps
with -fwasm-exceptions; emscripten_sleep added to the post-link asyncify-imports.
- libcontext fiber entry wired under native exceptions; while-loop main loop +
currData shim injected into all wx apps.
- Native-EH collab apply fixed: DEBUG-define the embind TU + match all out-of-CMake
C++ TUs' ABI flags to the core, fixing the vtable-layout skew / mis-dispatch.
- 3D viewer enabled by default (real raytracer linked, not the stub).
- Retire the EH-spike scaffolding; flip the asyncify-races ablation pins to
shim-redundancy pins (native-EH stays clean with the legacy shims ablated).
- Fix the asyncify-races quiescence check to not require Asyncify.currData==0:
under the native-EH per-frame-yield top loop the main stack is asyncify-suspended
every frame, so currData legitimately churns (a freed-but-not-yet-nulled buffer,
not a leak). Refresh the pcbnew toolbar screenshot baseline for the new kicad.
- CI: drop the obsolete binaryen_version input/env (the build uses the binaryen
submodule fork's wasm-opt, not a version download); key the wasm-output cache on
the binaryen submodule SHA instead.
Bumps the wxwidgets + binaryen submodules to their squashed feature commits.
Validated green: all 7 apps native-EH (real 3D in pcbnew); KiCad e2e 63/63
Firefox + Chromium (3D viewer renders); wx 336; coroutine 34/34 both engines;
asyncify 7/7 both engines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Submodule pointer bump for the wxMenuBar dangling-child fix that resolved the 18 DOM-port kicad e2e failures. Also adds the async-debug dossier (docs/features/async/08-10) root-causing the 'indirect call to null' / 'signature mismatch' family to the menu-bar use-after-free, and folds the asyncify harness into 'npm test' (new test:wx for wx-only); tests/README + WHATWORKS updated to match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The canvas (wxUniversal) mode is gone (wxwidgets submodule); remove every
piece of side-by-side plumbing so there is exactly one build and one test
flow:
- scripts/build-wxuniversal-wasm.sh -> scripts/build-wx-wasm.sh; no
--dom/--enable-universal; builds into build-wasm/wxwidgets
- build-wasm-test.sh: no DOM_BUILD / apps-dom rsync mirror / PORT=dom;
apps build straight into tests/apps (Makefile.wasm PORT conditionals
collapsed; wx.js + wx-dom.js always pre-js)
- docker/build.sh, build-kicad-target.sh, env.sh: WX_PORT / -dom /
-universal suffixes removed; kicad builds to kicad-<app>, outputs to
output/; wx.js/wx-dom.js copied from the real source path
(/workspace/wxwidgets/build/wasm — the old build-wasm path never
existed and silently failed)
- setup-kicad-wasm.sh: single target dir; the perl wx-dom.js injection is
gone — the 7 checked-in kicad pages now reference wx-dom.js directly
- playwright configs serve apps/; fixtures drop the test-results/dom and
logs/wxwidgets/dom namespacing; boot.spec asserts wxDomPort
unconditionally; pcbnew.spec uses one reference image;
appearance.spec assertions unconditional
- compare/update-baseline-screenshots.sh: --port removed
- tests/gal-regression/wasm/Makefile: links build-wasm/wxwidgets and
carries wx-dom.js as a second pre-js — the gal-webgl suite (30 specs)
now actually builds and runs here (it needed host-side boost+glm via
scripts/deps; the bundle had been missing, timing the whole spec out)
- tests: clickCanvas() dispatches via page.mouse (DOM widgets
legitimately cover the canvas; locator actionability refused the
click); the comprehensive spec drives wxChoice through its native
<select> (browser-owned popup cannot be coordinate-clicked)
- docs: README/CLAUDE.md/build.md script names and dirs;
features/wx-dom-port README reframed (DOM is THE port), visual-notes
bugs 26-28; FindwxWidgets.cmake config label drops 'wasmuniv'
- wxwidgets submodule -> 9dbacc9448 (DOM-only port, fork diff shrunk)
Gate: full wx e2e suite 292 passed / 1 skipped / 0 failed — first run
ever with the gal-webgl specs green (28 scenarios + load + sequential).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The wx test-app mirror (build-wasm-test.sh --dom, rsync --delete) wiped
the kicad bundles setup-kicad-wasm.sh syncs into apps-dom/kicad —
apps/kicad only carries the checked-in HTML. Exclude kicad/ (that dir is
owned by the setup script). Add 'npm run serve:dom' for browsing the
DOM-port apps; plain 'npm run serve' serves the canvas dir, which has no
kicad bundles in this worktree (canvas KiCad was never built here).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The asyncify single-slot work, executed red-green (full ledger:
docs/features/asyncify-arbiter/redgreen.md; decisions record:
docs/features/async/07-decisions-and-outcome.md):
- tests/apps/standalone/asyncify-races/ + tests/asyncify/ + dedicated
playwright config: 8 scenarios reproducing the KiCad asyncify failure
family with the kicad-faithful startup topology (pre-park fiber swap →
park throw through the live trampoline). Built in 3 variants; the
SHIM_DISABLE_TRAMPOLINE_HEAL / SHIM_DISABLE_HANDLESLEEP ablation builds
keep the historical hang and index-out-of-bounds crash reproducible
forever (mutation-style pins for the existing shims).
- scripts/common/shims/handlesleep.js: catch the "unwind" park sentinel
in the wakeUp path — when main's last pre-park suspension was a sleep,
the main-loop park throw escaped through that sleep's promise reaction
as an uncaught rejection (the calculator/gerbview console errors).
- scripts/common/inject-dyncall-shims.sh: SHIM_DISABLE_* ablation knobs.
- Spec tightening (the acceptance bar): 'uncaught exception: unwind'
tolerance DELETED from pcbnew/eeschema specs; load-pcb gained a hard
clean-console gate over 5 asyncify corruption signatures.
- wxwidgets pointer bump: modal LIFO resolvers, pump resolve-on-error,
sync clipboard IsSupported (014f67e6c1).
Final state: asyncify suite 7/7, wx e2e 291/292 (1 skip), KiCad e2e 40
passed / 2 skipped with ZERO corruption signatures in any log across all
six apps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The xvfb/WebGL fix (f37ddc4) took CI from 22 to 11 failures (identical on
Hetzner 27343415331 and Ubicloud 27343416511) — everything left is the
pcbnew family, still dying at wasm compile: pcbnew's ~190M debug module
exceeds SpiderMonkey's per-process code budget on x86-64 even with the
baseline-only JIT (the same module compiles on arm64, whose denser code
fits — which is why the local arm64 repro passed). No pref raises that
limit; V8 handles the module fine.
New CI-only 'chromium-ci' project (bundled Chromium, headless, SwiftShader
via --enable-unsafe-swiftshader) carries pcbnew/pcbnew-collab/load-pcb/
load-pcb-probe; the firefox project ignores them on CI. Workflows call the
new test:kicad:ci script which runs both projects. Local test:kicad is
unchanged (firefox everywhere, system Chrome for headed runs).
Validated under x86 emulation (linux/amd64 playwright image on Rosetta):
the pcbnew wizard test passes on chromium-ci in 23s against the fresh
v130-postprocessed 192M module.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add an e2e suite that drives the real React web app (not the standalone
harness): tests/playwright-web.config.ts + tests/web/tools-open.spec.ts navigate
/p/demo/<tool>/<file> for all five tools and assert each boots, opens its demo
file (title drops "untitled"), shows no first-run wizard, and emits no WASM abort
or URL-regex modal. global-setup-web.ts re-seeds the demo project through the API
if missing, so the suite is self-sufficient against a running dev stack. Wired as
`npm run test:web`.
Also at the harness level:
- pl_editor-load.spec.ts: prove the pl_editor kicadOpenFile embind hook opens a
.kicad_wks (mirrors eeschema-load.spec.ts).
- seed KiCad config in pl_editor.html / symbol_editor.html (matching eeschema.html
and the web app's boot.ts) so the harness boots wizard-free; repurpose
pl_editor.spec.ts's stale "wizard completes" test into a wizard-skip regression.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Convert the calculator port (commit 0464470) from the parallel/copy-paste
pattern to the dispatch pattern used by pcbnew + eeschema.
- docker/build.sh: <app> is now required (no pcbnew default); missing,
unknown, and --help paths all print "pcbnew | eeschema | calculator | all".
Adds calculator to build_app() via kicad_subdir_for() (pcb_calculator
inner subdir, calculator.* output basename). Also fixes the
EMSDK=/emsdkkicad-wasm-builder typo that snuck in during the calc merge.
- scripts/kicad/build-kicad-target.sh: accepts calculator; introduces
KICAD_TARGET (pcb_calculator for calc, == APP_NAME otherwise) used for
the make target, embind include path, and final-log line.
- scripts/kicad/build-calculator.sh: 305-line copy of build-pcbnew.sh
collapsed to a 7-line wrapper around build-kicad-target.sh.
- tests/scripts/setup-kicad-wasm.sh: copy_app calculator added with the
same pcb_calculator subdir mapping for the docker-volume fallback path.
- tests/package.json: test:calculator* routed through the shared
playwright-kicad.config.ts kicad/calculator.spec.ts (mirrors eeschema).
- Delete: docker/build-calculator.sh, tests/scripts/setup-calculator-wasm.sh,
tests/playwright-calculator.config.ts.
Bumps wxwidgets d1d1627 -> 6fb2eac (origin/wasm-port). The new sha includes
"unic/combobox: add GetCurrentSelection() inline default" which calc's
kicad/pcb_calculator/widgets/unit_selector.cpp needs to compile. Without
this bump the unified dispatch would expose calc as a buildable target but
the build itself would fail. Verified: build.sh all completes clean across
all three apps; pcbnew/eeschema e2e pass; calc compiles and launches (test
stability separate from this refactor).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Investigation scaffolding for the Chrome-only KiCad coroutine renderer crash.
Adds isolated reproduction probes exercising the coroutine/Asyncify/fiber layer
under KiCad-like conditions, runnable in BOTH Firefox and system Chrome.
- tests/playwright-coroutine.config.ts + test:coroutine:firefox|chrome npm
scripts: run the coroutine specs in Firefox AND system Chrome (the old e2e
config only used bundled Chromium, which never reproduced the crash).
- tests/apps/standalone/coroutine-pthread/: no-wx + pthreads reproduction probes
(fiber-in-main, nested invoke_/dynCall boundaries, RunMainStack, embind,
main-loop/rAF activation) + worker_dom_stub.js for wx+pthreads builds.
- tests/apps/Makefile.wasm: coroutine-pthread{,-main,-nested,-nested-ex,-wx,
-embind,-mainloop} targets.
- scripts/common/shims/diagnostics.js: add EM_ASYNC_JS handleSleep enter/wake
tracking (DIAG_SLEEP) to detect nested-async at the crash.
Findings (details in research notes): every isolated factor so far — direct /
nested / RunMainStack fiber, wx event loop + all 13 scenarios incl EM_ASYNC_JS,
pthreads, and main-loop/rAF activation — runs CLEAN in system Chrome. The
coroutine/Asyncify layer is exonerated; GL/WebGL is the remaining untested factor
(next). The reliable FF-pass/Chrome-fail repro is still the KiCad pcbnew e2e.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The shim bound bare dynCall_* names to JS getWasmTableEntry() calls, bypassing
the asyncify-instrumented dynCall_* wasm trampolines that -sDYNCALLS=1 provides.
That broke Asyncify unwind/rewind through indirect calls -> "indirect call
signature mismatch" (caught every frame in Firefox; fatal renderer crash in
Chrome). Bind the bare names to wasmExports["dynCall_<sig>"] instead.
Result: the PCBnew "select draw lines" e2e is green in Firefox (tool selects and
draws, zero page errors). Dropped the fiber-stabilization block, the shipped
diagnostic block, and the exportCallStack JS hack (all compensated for the wrong
binding); shim shrank 521 -> ~250 lines.
- scripts/common/inject-dyncall-shims.sh: orchestrator only; injected JS extracted
to scripts/common/shims/
- scripts/common/shims/dyncall-binding.js.tmpl: per-signature binding template
- scripts/common/shims/handlesleep.js: nested-Asyncify handleSleep fix (#9153)
- scripts/common/shims/diagnostics.js: logging-only, opt-in via SHIM_DIAGNOSTICS=1
- tests/package.json: add test:kicad:firefox / test:kicad:chrome scripts
Known issue (tracked separately): Chrome still renderer-crashes on the first
coroutine resume. Asyncify.doRewind replays the deep main-context call stack and
exceeds V8's execution-stack limit (Firefox tolerates the same wasm). Proper fix
is JSPI.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Chrome headless crashes on ARM Mac due to a known Chromium bug where
SwiftShader WebGL is disabled on ARM architecture (issues #1416283,
#338414704). Firefox headless works reliably using native Metal.
Changes:
- Use Firefox as default for npm run test:kicad (headless)
- Use Chrome with --headed flag for npm run test:kicad:headed
- Add viewport size and increase timeout for KiCad WASM
- Simplify pcbnew.spec.ts test assertions
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- npm run test:kicad now auto-runs setup script first
- Create separate playwright-kicad.config.ts for KiCad tests
- Fix kicad spec to use web server instead of file:// paths
- Remove duplicate pcbnew.html/wasm from tests/kicad/
(proper files are in tests/apps/kicad/)
Test separation:
- npm test: runs only wxWidgets tests (tests/e2e/)
- npm run test:kicad: runs only KiCad tests (tests/kicad/)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add pcbnew-load.spec.ts: Tests for WASM runtime initialization
- Add pcbnew.html: Test harness for loading KiCad in browser
- Add setup-kicad-wasm.sh: Script to copy WASM from Docker build
- Add serve.json: COOP/COEP headers for SharedArrayBuffer support
- Update package.json: Add npm run test:kicad and setup:kicad scripts
- Update .gitignore: Exclude generated WASM/JS files from kicad/
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add proper TypeScript setup with tsconfig.json and type definitions
to resolve type errors in the e2e test files.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add tests/ directory with Playwright e2e tests
- Add minimal wxWidgets WASM test application
- Add build script for test app (scripts/build-wasm-test.sh)
- Update wxWidgets submodule with WASM build fixes
- Update .gitignore for test artifacts
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
