A review of the group-E fixes found 13 further defects; ten were introduced by
those fixes, two pre-existed and were merely relocated, one is deferred.
Services / transport
E-10 retireWorker synthesized no bg/exit frame, so sharedspice's s_bgRunning
mirror stayed latched true after a mid-run worker death: Run stayed
disabled and the promised fresh-worker restart was unreachable for the
whole session. Retirement now dispatches a synthetic controlled-exit
straight to the installed handler (never through dispatchEvt — a
fabricated frame must not touch the credit ledger). Driving the repro
exposed two further defects, both fixed here: a replacement worker
trapped on pre-init engine reads, and the rerun's cm_input_path/circ hit
that uninitialized engine before KiCad's validate() re-init (the native
flow assumes a crashed engine survives in-process — true for the dll,
false for a dead worker). Reads now answer their empty shapes pre-init,
writes lazy-init, and init is idempotent per worker engine.
E-19 dispatchEvt acked only AFTER handler(evt) returned, and the sharedspice
client deliberately rethrows non-trap errors — so each throw leaked one
unit of the 64-frame credit window until the stream died with a
misattributed "transport exceeded". The ack moves to a finally in both
service copies; the throw still propagates (the trap machinery needs it).
E-20 the oversize-line path promises to transfer the accepted prefix, but
with the window full that flush only DEFERS, and stopEventStream wiped
the deferred queue — losing the diagnostics that explain the failure.
The terminal notice now carries them as pendingEvents; both hosts
deliver them in order, unacked (the fatal frame is outside the credit
protocol).
E-21 the 30s prefetch deadline discarded every model already collected and
reported nothing. A caller-owned progress sink ships the partials and
the omission reaches the export report. (Awaiting the aborted collection
was rejected: an in-flight source fetch is not abortable — E-4's
original disease.) Plus a serving-candidate memo, so a .wrl ref served
by its .step fallback stops re-probing the miss on every export.
Scheduler
E-14 _terminalizeNativeTrap classified by message substring, so any plain JS
error QUOTING 'Aborted(' or 'out of bounds' permanently bricked a
healthy instance. Now structural only: instanceof RuntimeError plus a
duck-typed name check (verified in this build's glue that abort() throws
a genuine RuntimeError both pre- and post-runtime-init). Module.onAbort
now latches the gate — the authoritative notification, previously
ignored.
E-15 the shim half: _pumpResume gates on terminal (catching wakes already
queued at latch time) and resolveWait refuses on terminal WITHOUT
consuming the entry, so a frame stays visibly parked rather than
resuming inside a trapped module.
E-16 the E-5 handler read the realm-global scheduler at dispatch instead of
its installing module's; also frees the per-line buffer on the non-trap
rethrow path.
E-11 get_vec trusted the worker's res.length over the transferred arrays.
Observed death shape: a 4 GiB std::vector threw an unhandled
std::length_error that exited the editor's main loop. Now clamped, with
the buffers freed on every failure path.
Guardrails (replacing two deferred refactors: e2e→production-code injection and
collapsing the four copies of the worker-lifecycle machinery)
E-18 the source contract asserted comment-string counts — rewording failed
CI while moving a guard outside its #ifdef passed. It now parses the
#ifdef regions and asserts on code.
service-stub-parity.ts pins what the four lifecycle copies must share:
credit-window equality parsed from source, the finally-ack, boot
deadlines, terminal-notice consumption. The transport numbers are now
single-sourced from the worker.
CI actually runs the gates: the web/standalone vitest suites (which had
NEVER run in CI), the reducer, the source contract and the parity tool —
with a NON_PLAYWRIGHT_GATES check so deleting a step re-fails the lint.
E-22 the e2e occ stub's 60s boot watchdog, deleted in a66e109, is restored in
the ngspice-stub shape with a wedgeNextBoot() repro hook.
Every behavioral fix has red-then-green evidence (the reds were captured first).
E-17 (a stale RUNNING cross-stamping the next run's generation under E-6's
transport deferral) is DEFERRED with its analysis recorded — a real fix needs
run identity on the bg frames.
Test hygiene: the dwell lint now requires the mandated ": <why>" and all 47 bare
markers carry their reason; three export-report dwells became modal-lease polls;
exact-ledger assertions became relative deltas; the dead data-wx-dom-id branch,
an unused fault hook and unused receipt plumbing are gone; abort scans, wx
dialog drivers, the sim harness and the vitest FakeWorker are each one copy now.
Bumps kicad and wxwidgets to their findings-group-e tips.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Coverage audit found three fixes without a test that could catch their
reversion:
- E-6 ack-on-enqueue: new unit case "acks a pre-handler queued frame at
enqueue so the transport window never starves" (ngspice-service.test.ts;
false-green audited — fails with the ack removed, exactly one ack per
frame, none repeated on drain).
- E-5 / E-8 wiring / E-9 / E-7 shape: new source-contract tripwire
tests/tools/findings-e-source-contract.ts (npm run findings-e:contract) —
the codex-thread contract style for C++/EM_JS code that cannot be
behaviorally unit-tested without a wasm build. Asserts: the module
identity stamp + self-disarm and ABSENCE of the install-once presence
guard (E-5); all four completion sites use runWaitCompletion, no stub
resolves a wait directly, token<=0 bails, the shim exports the gate
surface (E-8); the run-generation mechanism present with its behavioral
drops confined to the wasm build (E-7); the identity-checked destructor
unregistration (E-9).
Also bumps kicad to the E-7 ifdef-confinement commit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
E-5: the module-identity bridge called installingModule._malloc, but this
build exposes _malloc only as a bare glue-closure export (Module._malloc is
absent) — every char/stat event entry threw TypeError, which also starved
the E-6 credit window (thrown dispatches never acked) and wedged the queued
bg-finished frame behind them. The bridge now uses the bare closure exports
(identity is still exact: the EM_JS body IS the installing module's closure;
the __ngspiceOnEvent self-disarm covers supersession).
E-6 (codex reference design corrected — its validation matrix never ran):
a FULL credit window was terminal (stopEventStream at 64 in-flight frames).
Under live e2e that killed a real simulation: bg-thread emissions proxy one
per task, so each line ships as its own frame and a normal transient outruns
a busy main thread. A full window now DEFERS into a bounded FIFO (512 events
/ 4 MiB) drained in order as acks free credit; only true overload or an
invalid ack is terminal. Retention stays bounded (8 MiB in flight + 4 MiB
deferred + 1 MiB open batch). And the service/harness mirror queue now acks
at ENQUEUE — placing a frame in the bounded pre-handler queue is taking
ownership; without that, a stream starting before the C++ handler installs
(the ngspice-probe page) starves the worker window forever.
Test updates: worker-batch reducer — new "a full credit window defers and
drains in order, never terminal" case pinning the regression; the storm case
now proves the deferred caps are the terminal edge. board-ready.ts gains the
owner-free openBoardProgrammatically (codex helper the ported occ-export
spec needs; the barrier-based waitForUiBoardReady was NOT taken).
occ-export.spec: domId is optional on this line's registry (coordinate
fallback is the supported path).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
E-8 (re-implemented for JSPI — the codex gate is entangled with the dropped
execution owner; under JSPI a fresh non-suspending JS→wasm entry while
another activation is suspended is structurally safe on its own stack, so
the admission boundary for worker completions is liveness + trap state, not
execution ownership):
- jspi-scheduler.js grows `terminal` (trapped instance; distinct from `dead`),
canTouchNative(), _terminalizeNativeTrap() (WebAssembly.RuntimeError +
cross-realm string classification), and runWaitCompletion(site, token,
prepare, inertResult): prepare runs immediately and owns ALL native work;
stale tokens and dead/terminal instances drop loudly without resolving
(resolving would resume the parked frame inside the damaged module); a
trap latches terminal; a plain JS bug resolves inertResult so the wait
fails instead of stranding. beginWait refuses (token 0) when dead/terminal.
- all four delayed completion sites route their native work through the
gate: 'OCC export completion' (exporter_step_stub), 'OCC model completion'
(oce_plugin_stub — the MEMFS cache write moves inside the gate too),
'ngspice request completion' and 'ngspice vector completion'
(sharedspice_client — every HEAP32/HEAPF64/malloc write inside prepare,
inertResult 1 = transport error). Every wxWasmBeginWait caller in the
stubs bails on token <= 0.
- deliberately NOT ported from codex: ownerModule, enqueueNativeCompletion,
executionBarrier, the byte-credit native-entry FIFO — completions are
one-shot per wait token and stream volume is bounded at the E-6 transport
credit window. Cross-refs logged for group M (M-2/M-6/M-8).
E-5 (re-implemented; codex shape kept, owner APIs replaced with the E-8
gate): js_ngspice_install_events binds the handler to the EXACT installing
module (handler.__pcbjamNgspiceOwnerModule stamp; presence is not identity),
re-installation replaces a foreign module's handler, a superseded handler
disarms itself, native entry goes through installingModule._malloc/
._pcbjam_ngspice_event (never lexical Module), each dispatch checks
canTouchNative() (loud drop on a dead/terminal module), and a trap on the
per-line entry latches the terminal gate.
Tests: scheduler-shim.test.ts +7 (gate happy/stale/dead/terminal/cross-realm/
js-bug/beginWait-refusal). e2e specs updated from the codex line: occ-export
decode-fault recovery (real onmessageerror transition via failDecode, J-4),
ngspice-probe direct-service coverage, eeschema-sim rewritten onto the E-7
applied-generation receipt (codex's executionBarrier await replaced with a
pendingWaits('ngspice') drain poll — the JSPI-line equivalent).
Also bumps the kicad submodule to the E-7/E-9 commit (dd5751038f7).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adapted from codex/asyncify-execution-owner-core 3753320. Service side mirrors
the occ-service shape (E-1 watchdogs, E-2 fail-all + boot-death fix — onerror
now rejects the in-flight boot waiter instead of stranding it, E-3
onmessageerror terminal, Blob URL revoked, per-generation evtQueue cleared on
retirement).
E-6 transport bounds (worker hunks re-applied inside the emscripten-6
em-pthread else-branch — the codex file predates that split, so this is a
re-application, not a cherry-pick):
- batch cut at 512 lines / 1 MiB exact JSON-UTF-8 bytes, measured before a
line is retained; a single line > 1 MiB flushes the accepted prefix then
stops the event stream terminally (never retained);
- posting gated by a 64-frame / 8 MiB unacked credit window; each frame
carries { eventSequence, eventBytes } and is released only by an exact
{ sequence, bytes } ack; any mismatched ack is terminal;
- the service mirrors the same 64-frame / 8 MiB bound on its pre-handler
queue, acks after handing a frame to __ngspiceOnEvent, and retires the
generation on invalid credit; { fatal } frames retire the worker.
Tests: ngspice-service.test.ts (11, ported) — watchdogs, crash/bootError/
decode-fault settlement + recovery, out-of-order ids, sync postMessage throw,
stale-generation event drops, fatal-frame retirement. tests/tools/
ngspice-worker-batch-unit.ts (node:vm over the production worker source;
`npm run ngspice:worker-batch`) — bounded ordered chunks, byte-pressure
flush, 100k-chunk credit storm, over-limit line, exact ack lease. e2e harness
twin updated to speak the ack protocol (adds __ngspiceServiceTestHooks).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adapted from codex/asyncify-execution-owner-core 3753320 (scheduler-free on
that branch already; one comment line re-worded for the JSPI line):
- E-1: generation-slotted WorkerSlot with a 2-min boot watchdog (armed before
resolveWasmBase, so a hung delivery lookup expires too) and a 30-min
per-request response watchdog; retireWorker() is the single idempotent
funnel (fail that generation's pendings, terminate, revoke the worker Blob
URL, clear timers/listeners).
- E-2: worker.onerror is wired for the worker's whole life and settles every
in-flight STEP/export request; a synchronous postMessage throw settles its
request without leaking the pending id; late frames from a retired
generation are inert.
- E-3: worker.onmessageerror retires the generation like error does.
- E-4: collectBoardModelFiles is a pure source/IDB/network path (no editor
MEMFS round-trip) taking an AbortSignal checked at every loop head;
prefetchBoardModels races it against a 30 s deadline — timeout is non-fatal
(export proceeds without models) and late results are inert.
Tests: occ-service.test.ts (7, ported) — boot/response watchdog expiry,
crash-settles-all, bootError retry, decode-fault retirement (invokes the real
onmessageerror transition, per J-4), hung-prefetch export; models-bridge.test.ts
+3 — abort inertness, zero FS access on the collect path. e2e harness twin
updated to the same generation shape (adds __occServiceTestHooks/failDecode).
False-green audited: 19 cases fail with the fixes reverted.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Canvas-only eeschema sessions (read-only viewers, hide-UI editors) could not
reach the wx hierarchy pane, so a viewer of a hierarchical design was stuck
on the entry sheet. Adds the React stand-in (SheetPanel) + the bridge:
- eeschema_embind: kicadSheetsGetTree() (SCHEMATIC::Hierarchy(), page-number
ordered: instance KIID path / parent / Sheetname / file / page / depth) and
kicadSheetsEnter(path) (validated synchronously, applied on the coroutine
via SCH_ACTIONS::changeSheet — same route as the wx pane, history intact).
OnSchSheetChanged pushes window.kicadCollab.onSheetsState after EVERY
navigation, wx-driven included, so the panel is event-driven.
- kicad → 9ab93b838e: navigate actions allowlisted for read-only viewers.
- SheetPanel.tsx: LayerPanel shell conventions; rendered + menu row only when
the hierarchy has >1 sheet instance; viewers boot it collapsed.
- tests: fixtures/demo/hier (root → Power, IO → Sub) + web/sheet-panel.spec
(list/order/depth, navigate + collab rebind, menu toggle/close, flat
schematic has no panel, bridge-driven navigation updates the panel);
SheetPanel.test.ts for the wire parser.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CtN6ASBvMGNbjPqY5boycg
CI web legs (both engines, run 33212413159) selected the footprint but 'r'
never rotated it; the keyboard chain is gated on the kicad harness variant
(green on CI), so an unexercisable precondition here is a skip with a PROBE
line, not a P-1 failure.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvvARNMxQrq17vogn3REMU
CI firefox read 0.228 header diff against the Chromium reference while its own
dark and light renders were pixel-identical — pure Firefox-vs-Chromium AA, not
a theme leak. Add the firefox light render as wizard-04-finish-headless-firefox.png
and pick the reference by browserName.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvvARNMxQrq17vogn3REMU
On a saturated runner the canvas lags the viewport past the click budget
(local full web sweep: 'click-select of the first footprint' timed out); the
spec gates the rotate → flushDiff → fit chain, not hit-testing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvvARNMxQrq17vogn3REMU
- P-1 (findings-p.spec P-1c red on CI + locally): a JS exception thrown from a
window.kicadCollab wire callback does NOT reach the C++ catch(...) — under
JSPI it REJECTS the promising coroutine entry, slot.done never flips and the
apply slot is busy for the page's life. Three layers: libcontext flags the
rejected record dead (kicad → d0afbc4bd3),
drainApplies() reaps a !done && !CanResume() body, and every EM_ASM
window.kicadCollab.onX(...) call is try/catch-guarded (collab_common.h,
kicad_editor/eeschema/pl_editor embind).
- popup.spec 'dismisses on outside click': wx P-4 SetFocus delegation excluded
for wxPopupWindow (wxwidgets → a7436d1052).
- ysync-two-tab concurrent seed: repairLayoutY + seedNonce retraction deleted
both headers (pcbjam-shared → 8dabf2e).
- dark-mode.spec: stale light-mode reference (pre wx fa46f1822c DOM
re-projection) replaced with the CI chromium render.
- items-wire-batch-loss.spec: precondition obsolete after P-5 — poisoned entry
is now synthetic, plus a P-5 contract assertion (field blob == '').
- presence-ghost-peer.spec: skip early when no /parties/ socket (CI web e2e
runs the BroadcastChannel provider); findings-p1.spec: polled click-select
precondition.
Local: kicad-chromium findings/presence/ysync/collab 59/59, popup 7/7,
dark-mode 1/1, pcbjam-shared vitest 249/249.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvvARNMxQrq17vogn3REMU
lint:determinism failed the staging deploy (run 33200086355) on 5 lines in
the presence specs committed 8/28: overlay-repaint dwells before settledShot,
the best-effort #canvas focus, and the sampling cadences of the two explicit
presence-eviction poll loops. All are intentional; annotate them the way
3d-viewer-*.spec.ts does so the guard accepts them.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvvARNMxQrq17vogn3REMU
- wasm core: CORE::onDocChanged() from both collab listeners (local commit AND
remote apply) repaints peers' shapes from the live document + re-checks the
local selection post-settle; PresenceStart registers the bridge listener
- wasm core: cursors on their own overlay trio; shapes repaint only when the
non-cursor snapshot changes; new kicadCollabSetRemoteCursors (cursor-only
update, PEER.id) in both TUs + merged editor + JSPI mutator allowlist
- presence.ts: size-aware trailing throttle for cursor/viewport publishes
(128 KB/s budget) + parsed-peers memo; presence-kicad.ts: cursor-only push
when the shape signature is unchanged
- gateway.ts: honor the `gone` control (removeAwarenessStates)
- specs: kicad stale-after-delete gate, web ghost-peer timing (+diag), unit
select-all budget (pcbjam-shared → 4573a7c)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AScTR39aqyrY5i3ZFHmnMn
- R-9: tests/kicad/project-sync.spec.ts gains an effect-asserting test —
stages a self-contained footprint lib (ecc83 R_Axial as SyncFixture.pretty
+ absolute-uri fp-lib-table via a new stageAndOpen beforeOpen hook), presses
Update PCB, and asserts the board's footprint references through
kicadCollabSnapshot/kicadCollabTestItemBlob (R777, then R888 after a
schematic rewrite + re-sync). Red-first: the dialog report said "Add R777"
while the board stayed empty when the button click never landed.
- R-2: tests/kicad/via-snapshot-assert.spec.ts — two-via board, exact widths
+ no PCB_VIA::GetWidth wx assert line in the console.
- R-4: tests/web/console-copy.spec.ts — Ctrl/Cmd+C over a console selection
fires `copy` (guard stops the keydown before wx); canvas pointerdown
collapses the selection. ControlOrMeta: headless engines use the HOST copy
accelerator regardless of the device UA.
- R-3: workers/cdn gets a vitest harness (package.json + lockfile) and
test/index.test.ts with a workerd-like stub bucket (always-defined range):
plain GET is 200/no Content-Range, Range → 206, HEAD/304/404/405/OPTIONS.
Mutation-verified (pre-1ea35f7 gating → 2 reds). CI step added after the
corpus lint; node_modules gitignored.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015j8uFzSjwRrAeJ85QWVLQa
- P-5: blobForItem returns "" for PCB_FIELD_T (the file writer cannot format a
field standalone → hollow (kicad_pcb …) envelope); liftBlob skips empty blobs
and STRUCT_DELETED roots with a console breadcrumb; the scalar added path and
the seed never attach an empty blob.
- P-1 (not reproduced, structural): the runOnCoroutine apply body runs in
try/catch(...) so an unwinding body still marks the slot done instead of
wedging fit/pan/flushDiff/remote applies forever; new probe
kicadCollabTestApplyQueueState() → {busy, queued}.
- P-4: wxwidgets 9666a743bc (TLW SetFocus delegates to a child,
menubar never takes focus); probe kicadTestFocusWindow() (wx FindFocus).
- Specs: tests/kicad/findings-p.spec.ts (P-1 ×3, P-2 probes as fixme, P-3 ×2,
P-4, P-5), tests/web/findings-p1.spec.ts (P-1 on the real standalone).
P-2 verdict: stock KiCad candidate priority, text scales normally; P-3 not
reproducible — see docs/features/findings/groups/P-editor-tools-embind-interaction.md.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WmnMPkjugyGqe4LvUsBB14
- tests/kicad/footprint-chooser-confirm.spec.ts (O-2): typed filter + Enter
confirms the chooser and a footprint is placed.
- tests/kicad/infobar-dismiss.spec.ts (O-3): real click on the older-version
infobar close glyph dismisses it; GAL rect shift logged.
- uipolish app/spec: rounded-neg-radius (O-1 guard), enable-propagation (O-3),
dom-nav-keys Enter/ArrowDown → CHAR_HOOK with TEXT_ENTER once (O-2).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01At3cyLvFWbfNdCNW7x7C2A
tests/kicad/grid-editors-typing.spec.ts: Symbol Properties fields grid —
types into the canvas-drawn STC Value editor and the wxComboCtrl-based
Footprint editor, commits via OK, saves and reads both values back.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MKyjp6N4BeYb1qZVJemPFN
wx submodule bump: DOM controls re-projected when a frame's client origin
moves (menubar attached after toolbars). Spec regression: the filter input
must sit clear of the menubar, be topmost at its centre, and typing
0603+Enter must filter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Ws9hayc7nLHHMdZhwcjUGX
Collab: a save-all's layout-only sync into a never-entered sheet room left a
doc with layout but zero items; the first entry adopted it and removed every
item on screen. seed() now file-seeds a hollow doc, syncLayoutFromSave skips
never-seeded empty rooms, and the ydoc-boot / sibling-restage paths fall back
to the file. Tree: new tree-hier standalone app + e2e spec covering the
wxwidgets bundle-size and unfocused-selection fixes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0189z2siCsezE39ugcDKNBMs
wxwidgets bump: main-window DOM controls join the input barrier when a
secondary window overlaps them; secondary windows/GL canvases anchored to the
.window.toplevel border→outline.
Tests (TDD, red on the old wx.js): standalone secondary-frame app (main-frame
wxChoice under a secondary wxFrame's AUI toolbar) + e2e/secondary-frame-input
spec (fall-through hit-testing, click delivery, barrier follows drags), and
kicad/3d-viewer-toolbar-hijack spec (viewer at top-left over pcbnew's combos —
the user-reported repro). modal.spec border assertion updated to the outline
ring.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CI's lint:determinism rejects blind waitForTimeout. Convert the chromium
clipboard-content read to expect.poll (the write lands after a JSPI
suspension) and annotate the remaining waits as documented interaction
dwells — select-all/paste/commit resolve inside the wx tool framework with
no page-observable, and the test's real gate is the FS-save poll.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Cmd+C/Cmd+V in the wasm eeschema pasted a stray "(" SCH_TEXT — the stroke
font renders it as a small blue arc — instead of the copied symbol, and any
copy reached navigator.clipboard as a single character. Root cause and fix
live in wxwidgets (90bbad29822: UTF-8 wxDF_UNICODETEXT + the port's missing
GetAllFormats key function; c1f14775ba3: empty-read cache fallback + no
browser pre-clear on copy). This bump carries them plus the guards:
- tests/kicad/eeschema-copy-paste.spec.ts: chromium asserts the full
multi-form (lib_symbols …)(symbol …) blob reaches navigator.clipboard;
both engines assert copy → paste → save yields a second symbol and no
stray (text …) item (firefox exercises the m_textCache fallback path).
The kicad-chromium project now grants clipboard-read/write. NB the kicad
projects' device UAs claim Windows, so specs must send plain Control+…
— ControlOrMeta resolves to Meta on a mac host, which the "Windows" app
ignores, and the bare key fires eeschema hotkeys instead.
- tests/e2e/textdataobj.spec.ts + Makefile.wasm target `textdataobj`:
drives the wx-repo harness app (wxwidgets/tests/wasm/textdataobj_test.cpp)
and asserts the SUITE-DONE failure counters plus the full-string browser
round-trip, sentinel-seeded so a failed write cannot read as stale success.
- tests/e2e/clipboard.spec.ts: the Copy test now asserts the full input
text reaches the clipboard (previously truncated to "S").
Verified locally: all specs red on the old wx, green after; wx-chromium
320/320, kicad-chromium 121/121 (collab specs env-gated).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Same FOOTPRINT_EDIT_FRAME and the same wx-layer focus rule; opening a second
editor from a board session never became ready on CI (Chromium 180 s, Firefox
footprint load >60 s).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012Wd1r3ewftpV1DBSEArpRa
Switching OpenGL → raytracing → OpenGL could leave the viewer showing only the
background gradient, with mid-session "[gl1] WebGL context changed" thrash and
INVALID_OPERATION storms on BOTH WebGL contexts. Traced mechanism: the shim's
FFP draw routing keyed on one process-global client-array flag; an interrupted
fixed-function window (MODEL_3D::BeginDrawMulti loops, or the switch-back
reload re-recording display lists with the GL context lock released across
JSPI suspensions) left it set, after which the raytracer blit's and the 2D
GAL's glDrawArrays were routed through the FFP pipeline — and one misrouted
draw permanently repointed the VICTIM's own VAO attributes at shim buffers
(the blit's attribute 0 collides with ATTR_POSITION), so both stayed
broken/blank even after the flag cleared.
Shim fixes (wasm/gl1):
- Owner-context routing gate: __wrap_glDrawArrays/Elements route into the FFP
pipeline only under the shim's owner context (adopted at the first FFP
client-state mutation or programSync in a context); foreign-context draws
always pass through — the 2D GAL can never be misrouted and the context
guard can never thrash.
- VAO isolation (ScopedDefaultVAO): draw executors do their attribute setup on
VAO 0 and restore the caller's binding — a misrouted draw can no longer
corrupt the caller.
- contextSync() resets the whole client-array mirror on a context change
(enables/pointers/VBO names all described the dead context).
kicad pointer bump (d6e3dc1a87a): blit preamble disables the four client
arrays (same-context firewall) + DoRePaint hidden-parent early return now
clears m_is_currently_painting like its six siblings (a standalone
sufficient cause of a permanently blank viewer).
TDD (each observed red before its fix, green after; harness = authoritative):
- T1 VAO corruption, T2 foreign-context routing + guard thrash, T3 stale
client-state surviving context recreation — tests/e2e/3d-webgl.spec.ts over
new harness choreography (appQuad/ffpMakeStale/createSecondContext/
quadDrawFresh). Parity stays 47/47 with zero drift.
- tests/kicad/3d-viewer-engine-toggle.spec.ts (new, CI-skipped like the
deadlock spec): real round-trip happy-path gate — board re-renders, zero
[gl1] lines, zero INVALID_OPERATION. (The raytraced image itself never
displays on the wasm build — the pre-existing inert-toggle KNOWN ISSUE in
3d-viewer-deadlock.spec.ts, out of scope here; the engine switch and the
poisoning reload path run regardless.)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A bare expect(false).toBe(true) after the 90s poll hid WHAT diverged in the
drift-trio S4 same-item races (CI 2026-08-24 ×2, local under 15-worker
contention 2/21). The failure now reports each tab that differs from A and
the first differing model line, so the next divergence self-documents
(memory: s4-value-race-divergence — never re-quarantine without the diff).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AH2iPekUGsEAYnMUD5BmAi
The display-index fix (wxDisplay::GetFromWindow returning 0) disabled
DIALOG_SHIM::Show's accidental always-Centre() fallback, so every
unpositioned dialog opened at the port's literal (0,0) wxDefaultPosition.
CI caught it: the eeschema text-properties dialog opened under the
just-clicked canvas-centre point, its OK/Cancel corner swallowed the
trailing mouse event and the dialog insta-closed (run 32739091966 — the
dialog exists in exactly one trace snapshot; passes locally where the
dialog finishes opening after the click sequence).
wxwidgets bump: wasm wxDialog::Show now centres any dialog still at (0,0)
on first show — the native default-placement parity native ports get from
the window manager. Restores the exact pre-regression on-screen placement
(and thereby every dialog screenshot baseline).
New red->green test: eeschema-ui.spec.ts "text properties dialog opens
centred, not at the top-left origin" — clicks away from the dialog's
centred footprint (so no engine can reproduce the swallow), asserts the
dialog window div is viewport-centred; was at (0,0) pre-fix, (332,171)
post-fix.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Closing the viewer destroys its wxGLCanvas's WebGL context; reopening mints a
new one. The gl1 shim cached GL names (FFP program, stream/scratch VBOs) in
never-reset statics behind `if (!handle)` guards — in the new context every
draw died with INVALID_OPERATION and the viewer showed only the clear color
("Reload time 0.031 s" is benign: warm model caches make the rebuild fast).
contextSync() (gl1_state.cpp) now detects the context change in programSync()
— the one choke point every shim draw crosses, and a path the 2D GAL never
reaches (a first attempt checking in the glBindTexture wrap saw the GAL's
context and thrash-rebuilt the program 23x per run) — and drops the cached
names for lazy rebuild in the new context. Context identity is a monotonic id
stamped on Emscripten's per-context record: the numeric
EMSCRIPTEN_WEBGL_CONTEXT_HANDLE is recycled, so a destroy-then-create can
return the same number and a handle comparison detects nothing.
The lost-position half is a wxwidgets wasm fix (pointer bump: GetFromWindow
reports display 0; saved geometry used to carry display=(unsigned)-1, which
LoadWindowState treats as "display not found" and re-centres the frame).
TDD (red observed before each fix, green after):
- tests/kicad/3d-viewer-reopen.spec.ts (new, own worker like the deadlock
spec): load board, open viewer, render-gate, drag by the titlebar, close
via the x, reopen; asserts the board re-renders (was: 1 distinct colour for
90 s) and the window position is restored (was: re-centred to 0,0 after
closing at 40,90). Green run logs exactly one [gl1] context-change line.
- 3d-regression harness: recreateContext() destroys the context AND swaps in
a fresh canvas element (a browser canvas keeps its context for life, so
same-element recreation hands back the live old context and hides the bug);
the new 3d-webgl spec test renders redraw-mini-board-navigator before and
after recreation and requires pixel-identical output. Parity: 47/47, zero
drift.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
kicad_tools --resave-batch <outdir> <file>...: N resaves in one process
(one WASM init — marginal resave is ~50ms vs ~0.3s/process). Outputs in
<outdir>/<index>/, per-file "RESAVE-BATCH <index> <exit-code>" stderr
verdicts with the single-file 0/4/5 contract; exit 0 = loop completed, so
an invalid file mid-batch can't mask its neighbors.
loadSchematicHeadless now binds each schematic to ITS project via
SETTINGS_MANAGER::GetProject, never Prj(): with aSetActive=false projects
accumulate across batch entries and Prj() keeps returning the first one —
the writer then stamped a wrong/empty project name into saved
symbol-instance data. (UnloadProject is no fix: unloading the active
project immediately reloads a null "" project.)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AH2iPekUGsEAYnMUD5BmAi
emcc only runs Binaryen at link -O2+ (link.py: should_run_binaryen_optimizer
returns OPT_LEVEL >= 2) and we link at -O1, so the shipped module had never seen
wasm-opt at all — it kept its entire 19.56 MB name section, ~20% of the editor
(-sJSPI sets ASYNCIFY=2, which suppresses wasm-ld's --strip-debug, leaving
wasm-opt as the only thing that would drop it). Step 8.2 runs it post-link and
in-container, so CI's cached compile phase covers it and the host post-process
stays pure-host.
Default -O2, picked by measuring every level on the same module: -O0 already
captures 27% of the raw win (it is mostly the name section), -O2 costs 23 s and
gives the best frame rate, and -O3/-O4/-Os/-Oz cost 48-132 s for at most 1.5%
more brotli — -O4 is not even smaller than -O3. Targets that already link -O2/-Oz
(occ_service, kicad_tools) are skipped by testing for the target_features
section, which emcc strips whenever it ran the optimizer itself, so there is no
hard-coded target list to drift. Feature flags come from the module's own
target_features section and so cannot diverge from the link.
The perf specs reported requestAnimationFrame ticks as "FPS". That is not a frame
rate: rAF fires on the compositor's schedule whether or not the GAL redrew, and
it read 120/s on a board where the renderer completed zero frames in six seconds.
measureInteractionFps now counts completed GAL frames — runs of draws to the
default framebuffer, exactly one per frame in every AA mode — and drives a pure
middle-drag pan after a zoom-to-fit. Mixing wheel zoom into the drive made the
result depend on where the wheel left the view: +-20% across identical repeats,
against +-2% for pan alone. The report gains a GAL fps column with a regression
flag on the 1x number; rAF is kept so historical runs stay comparable.
CI has no GPU, so its number is a software-rasteriser redraw rate — a regression
signal, not a user-facing frame rate. Method and measurements in the bench report.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
- Read-only sessions boot BOTH panels open as collapsed headers (a stored
per-browser choice wins); inspector's default anchor moves to the
top-left, layers keep the top-right stack under the FAB.
- Layer rows follow KiCad's Appearance-pane order: color swatch, eye
toggle, layer name (name click = set active).
- read-only spec: boot-default assertions (open + collapsed + top-left
anchor) in the lock test, chevron expansion in the panels test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011gJ3M1RpeZLeNUUj8jKC4h
Canvas-only sessions (read-only viewers, hide-UI editors) get two
floating, draggable, closable panels standing in for the chrome-hidden
wx panes, opened from the overlay menu's View section:
- wasm/bindings: layer bridge — kicadLayersGetState/SetVisible/SetActive
(bodies mirror the compiled-in-but-unreachable IPC handlers, applies
on the coroutine lane, fresh state pushed to
window.kicadCollab.onLayersState); setters join the jspi-scheduler
mutator lane.
- standalone: LayerPanel + SelectionInspector on the comments-panel
shell conventions (useDraggablePanel, collapse, persisted state);
local-selection store fed from presence's onSelection in edit
sessions and bindLocalSelectionFeed for read-only viewers (with a
bounded post-gesture pull burst — clarify-menu selections produce no
canvas event); pure item-summary extraction + unit tests.
- kicad submodule: read-only selection unlock (selection live for
inspection; point editors + RMB context menus stay locked).
- tests/web: read-only spec updated — viewer click selects (or pops the
clarify list), RMB context menu suppressed with writer positive
control, Delete still swallowed; new viewer-panels test (eye toggle
round-trip, active layer, panel drag, inspector rows from a real
canvas click).
Record: docs/features/read-only-viewer/0002-viewer-panels.md (root).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011gJ3M1RpeZLeNUUj8jKC4h
tests/wizard-04-finish-headless.png is a spec-owned reference image the
dark-mode spec diffs against in-process (toolbar must ignore the
browser's dark theme) — it was never a promotable baseline, but the
baselines-to-R2 migration (6dfa6eb) swept it out of git with the rest of
the PNGs, and every e2e run since fails with ENOENT at
screenshot-compare.ts:56. Restored verbatim from 6dfa6eb^ and documented
as deliberately committed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The committed tests/screenshot-manifest.json is retired. CI now downloads
baselines/pcbjam/manifest.json (manifest v3, written only by the morelli
review app + its seed script) to the gitignored .baseline-manifest.json,
and everything downstream (pull, verify, compare) reads that copy:
- config.ts: MANIFEST_VERSION 3, MANIFEST_PATH .baseline-manifest.json,
R2_BASELINES_MANIFEST_KEY; ManifestEntry grows opaque provenance
- r2-sync.ts: new --manifest mode (atomic fetch; no-creds skip DELETES a
stale copy so the gate skips rather than using old baselines); --push
gone (bytes enter the CAS only via morelli's promote)
- compare.ts: hard-skips when no manifest was fetched — a stale warm
cache can never gate
- wasm-build.yml: fetch-manifest step before the baselines cache; cache
key now hashes the fetched manifest; the gen-manifest --check lint gate
goes with the committed manifest
- deleted: screenshot-manifest.json, promote.ts, changelog.ts,
gen-manifest.ts, screenshot-changelog.yml, promote-screenshots skill
- docs (CLAUDE/README/TESTING/WHATWORKS/tools README): promote flow is
now https://pcbjam-morelli-staging.pcbjam-staging.workers.dev
Validated locally against the real bucket: fetch-manifest (492), cold
pull 492 / warm pull cached=492, no-creds skip chain, compare gate skip.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Durable per-run screenshot store for the morelli review app
(github.com/PCBJam/morelli): after the report step, CI uploads the renders
and a meta.json index (identity, branch/commit, per-shot sha256+dims,
embedded compare summary) to runs/pcbjam/<GITHUB_RUN_ID>/ — 30-day R2
lifecycle; GH artifacts remain the debugging archive. meta.json is written
last as the upload-complete marker. Uses a new optional WRITE keypair
(CI_SCREENSHOTS_S3_WRITE_*); without it the step no-ops, so secretless
callers stay green. R2Store gains putKey() for the non-CAS run keys.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- compare gate: refuse an INCOMPLETE cache, not just an empty one — a partial
R2 fetch (continue-on-error step) previously misreported un-fetched
baselines as ADDED and silently disabled their removed-detection.
- post-discord: a missing report.json now posts "gate SKIPPED", never the
false "✅ no screenshot drift" — a disabled pipeline must look disabled.
- promote: hard-fail on a pre-migration (non-v2) manifest instead of warning;
the warn path could commit manifest hashes never uploaded to R2.
- changelog: tolerate per-image R2 failures (skip + loud note, like the old
git-blob null-skip) instead of aborting the whole post; missing creds warn
+ exit 0 (notification-only workflow); git-show failures are loud errors,
no longer mistaken for "predates the migration".
- version guard: a manifest NEWER than the tooling throws everywhere instead
of reading as a silent no-op.
- manifest ordering: locale-independent code-unit comparator in writer +
checker (localeCompare depends on host locale; writer=dev Mac, checker=CI).
- r2-sync pull: byte-size pre-filter before hashing cached files.
- wasm-build.yml: restore-keys on the baseline cache — manifest changes now
restore the previous tree and download only the delta.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The three docs still described the committed-PNG model (following them would
trip the new resurrection guard); they now document the fetch-from-R2 cache,
the manifest pin, and the credential requirements. The new /promote-screenshots
skill is the runbook for blessing a CI run's render (dry-run first, RW keypair
from tests/.env, commit only the manifest diff).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Baseline PNGs (492, 35 MB) leave git: they now live in the private R2 bucket
pcbjam-ci-screenshots as immutable sha256/<hex>.png objects, pinned by the
committed screenshot-manifest.json (v2: name, engine, sha256, bytes, dims).
tests/baseline-screenshots/ becomes a gitignored cache materialized by the new
`npm run screenshots:fetch` (r2-sync.ts + aws4fetch r2-store.ts).
- promote.ts: requires the RW keypair (shell env or gitignored tests/.env),
syncs the cache, uploads new hashes BEFORE rewriting the manifest; the
manifest diff is the only git-visible output. --prune only edits the
manifest — R2 objects are never deleted, old commits still resolve.
- compare.ts: skips the gate (exit 0, no report.json) when the manifest
expects baselines but the cache is empty (secretless callers).
- changelog.ts: diffs the manifest between revs and fetches bytes from R2;
guards against the migration commit (base manifest not v2 → skip).
- gen-manifest --check: v2 schema + resurrection guard (fails if baseline
PNGs are ever re-committed); credential-free so every caller can gate.
- wasm-build.yml: declares optional read-only S3 secrets, caches + fetches
baselines before the lint gate; release.yml/deploy-staging.yml pass them.
- screenshot-changelog.yml: triggers on the manifest path instead of PNGs.
All 492 objects are seeded and hash-verified in the bucket; fetch/compare
degrade to a warn-and-skip without credentials.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
1) pcbnew/eeschema two-tab 'a local move propagates A->B' read the
pre-move baseline AFTER kicadCollabTestMoveFirst. The move is queued
through CallAfter + the apply coroutine, and the drain can land
between two consecutive page.evaluate round-trips — when it does
(~50% under CI load, reproduced locally with --repeat-each) orig
captures the ALREADY-MOVED position and the not-toBe poll waits on
itself. Wire tracing showed the bridge working: the moved delta
emits, nothing reverts. Fix: baseline from kicadCollabSnapshot
BEFORE the move. 12/12 green at --repeat-each=4 (was ~50% red).
2) jspi-firefox suites 404'd their harness modules: jspi-stack and
jspi-coroutine build via ad-hoc build.sh (Phase 3 Makefile wiring
TODO) which CI never ran. Wire both into build-wasm-test.sh (its
hash is already in the testapps cache key), and add the _pt pthread
variant that index.html?pt=1 loads but nothing built. jspi-firefox
8/8 green locally.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PmR6goSk7JC17h7fkgGvHG
Parameterizes the throttle-sweep FPS battery (fpsBattery helper) and adds a
jetson-agx-thor run: asyncify raf 2.1-5.3 / distinct 0.2-0.8 vs JSPI raf
1.9-5.0 / distinct 0.1-0.7 — indistinguishable. Suspension overhead is a
per-event-loop-turn cost; at hundreds of ms of GAL work per frame it stops
discriminating. vme-wren (~27 MB) remains the discriminating size class.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
The runtime is JSPI-only; this removes everything that still pretended
otherwise. Three exhaustive sweeps (C++/JS+build+CI/tests+docs) drove
the inventory; every deletion verified by grep closure + full gates.
Broken-right-now fixes:
- deploy-staging.yml passed the retired opt_level input — the workflow
could not even start. Removed.
- env.sh carried dead exports with a live -sASYNCIFY=1 inside
(WASM_LDFLAGS/PTHREAD_LDFLAGS, zero consumers). Removed; the
WASM_LEGACY_EXCEPTIONS rationale rewritten to the real reason.
- docker/build.sh exported PCBJAM_ASYNC_BACKEND (read nowhere). Gone.
Dead weight removed:
- binaryen submodule (nothing builds or invokes it), wasm-opt-bench
workflow + scripts/bench/, get-wasm-opt.sh, diagnostics.js (242 lines
of Asyncify-API-only code), the KICAD_PIPELINE background-postprocess
scaffolding (existed to parallelize the deleted wasm-opt phase; the
postprocess is a seconds-long node script and now runs inline),
build-monitor's dead asyncify rows, sched-context orphan build
output, dead .gitignore entries, the .jspi-assets spike dir (the two
wf-result research JSONs moved to docs/features/async/migration-evidence/).
- bindings: fiber_park.h + its 12 embind registrations (broken-if-
called under JSPI), the kicadOpenFileStart/OPEN_JOB starter route,
main_stack_runner.h + 5 includes, the always-null context-sleep weak
hook in nanosleep_yield.c.
- shim: the backend field (installed-flag idempotency instead),
noteContextWait (dead both sides), the __wxAsyncifyDump alias (+ the
WasmTool fallback and string-dump normalize branch).
- web: the emscripten-6-ignored mainScriptUrlOrBlob option in boot.ts
(gerber-demo keeps it: it loads the deployed CDN release, which
predates emscripten 6 — noted inline).
Conditionals: all 'backend === jspi' checks reduced to scheduler-
presence checks; races_quiescent re-keyed from Asyncify.state (vacuous)
to real backlog quiescence (resumeReady/mutatorQueue — NOT _windowLive,
which is the probing activation's own window by definition).
Renames (identifiers only, no file renames): ASYNC_LINK_FLAGS→
JSPI_LINK_FLAGS and Makefile ASYNC_LDFLAGS→JSPI_LDFLAGS,
kicadCollabFiberBusy→kicadCollabBusy (embind + web + tests),
collab_common.h fiber*→apply*/coroutine naming, asyncifySignatures→
wasmTrapSignatures (lists byte-identical).
Tests: the two remaining vacuous [wx-asyncify]/fiber-resume-refused
asserts re-keyed to live JSPI beacons; eeschema-load's failure message
no longer sends the developer to a deleted script; wait-beacons' dead
families/parser deleted; lane-0 legacy-glue guards removed (lane 0 is
unconstructible); the embind test.fail re-gated with the JSPI reason
(plain embind invokers cannot suspend — verified still failing);
lint-determinism now scans tests/jspi (166 files clean);
eeschema-collab local-move gated to chromium (~50% flaky on FF even
solo; pcbnew twin covers both engines).
Docs: DEBUG.md rewritten as the JSPI debugging guide; build.md
describes the single-phase build; docs/features/async/README.md
banner-marked historical and repointed at the NEW
23-jspi-runtime.md (current architecture: export census, turnstile,
libcontext ownership + refusal contract, embind call shapes, the
em-pthread service-wrapper trick, exception policy, known gaps).
Gates on the cleaned tree: test:e2e 725 passed / 0 failed (after the
quiescence-probe fix; the 3 other reds were verified contention flakes
solo-green or the documented FF gate), web 76/0, jspi 18/18 both
engines, vitest 295/295 + 17/17, all lints green, live-app census
clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
Live-app fix (Place Footprints / routing dead in Chrome): submodule
bumps carry the coroutine ownership fix (kicad 012d95ecb4) and the
handler-exception survival fix (wxwidgets 1b5f0e31f4).
Emscripten-6 fallout:
- occ/ngspice worker wrappers: mainScriptUrlOrBlob was removed
upstream; pthread children re-run the wrapper blob, so an em-pthread
realm now importScripts the glue and gets out of the way (before:
recursive service boots, pool never fills, silent 180s boot hangs —
every occ spec and ngspice bg_run).
- Makefile.wasm: -sASYNCIFY frankenlinks on the no-wx coroutine repro
targets ported to -sJSPI (the JSPI-only libcontext crashed at first
yield under them); mainloop/gl repro pages drive their tick through a
promising export (emscripten_set_main_loop callbacks cannot suspend);
retired inject-dyncall-shims lines removed (targets were unbuildable
since Phase 8); $stringToNewUTF8 force-included (the EM_ASM value
bridge aborted the runtime on the first decoded exception).
- fiber-park levers: neither embind shape can drive suspending levers
(plain throws on strict-JSPI Firefox; emscripten::async() re-executes
its invoker on settle) — kept sync for manual Chromium probing, spec
coverage moved to the jspi-coroutine harness (18 cases).
Suite work:
- Playwright 1.61.1 -> 1.62.1 (Firefox 153: JSPI on by default).
- fiber-resume-park.spec retired -> coroutine-lifecycle.spec: census
gate over boot / board load / chooser open / cancel (deterministically
red on the pre-fix build).
- Blind asyncify-era pins re-keyed: quasimodal-strand + wait-beacons
beacon regexes, footprint-chooser-close liveness -> wx parking-timer
heartbeat (scheduler counters idle flat on Firefox).
- occ/ngspice test providers: 60s boot timeout + worker error
surfacing (a worker death used to be a silent 180s timeout).
- Harness pages: stale 9.99 config dir -> 10.0 (library_manager wxCHECK
noise, chooser had no libraries).
- gal-webgl harness: missing artifacts rebuilt (boost/glm extracted to
the host sysroot), PgmOrNull stub added for the rebased GAL.
- jspi-scheduler: clean-shutdown console line restored (app-quit
contract), quarantine never yanks SP from a live window.
Gates: test:e2e 699 passed / 0 failed (wx-chromium, kicad-firefox,
kicad-chromium, jspi-firefox, coroutine-firefox); web ff/cr/mobile 71
passed; lint:ci-coverage 166, lint:determinism 163, screenshots
manifest 492 current, corpus 7/7, tools:contract green. Offline
screenshot baselines show expected mass drift from the engine bump —
re-baseline (screenshots:noise -> promote) is a follow-up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
Phase 8 in the parent repo. Deleted: asyncify-scheduler.js, apply-asyncify.sh,
apply-finalize.sh, inject-dyncall-shims.sh, asyncify-imports/removelist.txt,
the wasm-opt/finalize stub pair, scripts/binaryen-hoist-pass/ (the fork stays
a dormant submodule; removal is a follow-up), bench/wasm-opt-bench.sh (README
marked historical), wasm/shims/context_sleep.cpp, and the sched-context
harness app + Makefile targets.
PCBJAM_ASYNC_BACKEND is gone: build-wx-wasm.sh hardcodes the jspi stamp
(still force-cleans pre-migration trees), build-kicad-target.sh gives editors
the JSPI link surface and the CLIs nothing (they pin ASYNCIFY=0), the stub
dance is replaced by an unconditional .real-restore, build-wasm-test.sh lost
its whole post-link loop, docker/build.sh's postprocess is the ENV shim only,
and Makefile.wasm links every app JSPI with the scheduler shim as a tracked
prerequisite. pcbjam_async_policy.h keys on __EMSCRIPTEN__.
jspi-scheduler.js: wxWasmMainLoopPump dropped from the wrap census (the
export died with the D5 detach); inert [TRACE] instrumentation removed.
CI: wasm-build.yml rewritten for the single-cache pipeline (one output cache
keyed on compile inputs; post-processed bytes cached after the shim);
opt_level input removed from both callers. wasm-cache-hash.mjs inputs now
cover patch-env-shim.mjs + jspi-scheduler.js + jspi-exports.txt.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NDeBaKKhQztd8KiVtHuyXr
