wasm/shims/context_sleep.cpp: a main-thread nanosleep whose frame stands on a
scheduler context that OWNS the stack arms a mailbox wake and yield_parks that
context instead of suspending the stack in place. It lives in the sleep
primitive rather than in tool_manager.cpp on purpose - KiCad and the wx core
stay untouched (CLAUDE.md's fork rule) and the whole K7 class moves at once,
not just TOOL_MANAGER::RunSynchronousAction's spin loop.
MEASURED AT D-ON, and it is NOT what unblocks Phase D. The four canvas-tool
specs still fail, but the trace now names a different cause: the fatal swap is
old=<libcontext ROOT> new=<tool coroutine> with mouseEventHandlerFunc above it
- a DOM mouse handler entering wasm DIRECTLY on the main stack, bypassing the
tick. So one coroutine is entered two ways: by the tick through the dispatch
context as a STAR TRANSFER, and by DOM handlers as a DIRECT SYMMETRIC SWAP. A
capture written by one path cannot be rewound by the other -> index out of
bounds in doRewind. That is section 7 rule 5 (partial migration is worse than
none) in its purest measured form, and it is why the harness stays green: its
coroutines are only ever entered from one place.
So the next increment is the DOM event entries (mouse/key/wheel/resize must
hand their events to the dispatch context as the tick does), not another park
site. It subsumes the one-root work too: with no dispatch on the main stack,
resolve_root_identity() always answers "the running context".
Landing state: STAR_DISPATCH=0, kicad 139 passed / 1 (pre-existing occ-probe)
= baseline, with the sleep shim in and inert.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBjomQfKyRa3jBdeAKpmTw
Phase B increment recorded in §10. The wx battery is GREEN at D-on (395/1,
the 1 pre-existing) with dispatch contexts, context waits and star transfers
all live - the first clean battery of the migration. Gaps 1 and 2 from the
D-on probe are closed (terminal coroutine finish; wake/refusal semantics),
and a third containment was found and added: an exception escaping a handler
propagates out through drain()'s fiber swap and would otherwise leave the
registry mid-transition, dead-pumping every later wait. Shim carries the new
abandon call; .ci-cache-epoch -> 12.
THE BOUNDARY: on the full KiCad suite D-on loses four canvas-tool specs
(draw-wires, draw-lines, move-with-m, presence-locks move) to `index out of
bounds` in doRewind - the blue screen itself. Real tool coroutines park IN
PLACE inside their bodies, and a star transfer over an already-parked stack
rewinds state the fiber layer cannot see; the harness's coroutines yield
cleanly, so it goes green while KiCad does not (the doc-19 lesson again:
the harness models the shape, not the parks). So D cannot carry KiCad until
the tool-body park sites are contexts too - C+E completion, which §5 already
ordered before the flip. This measurement makes that ordering non-negotiable.
Landing state verified: STAR_DISPATCH=0, kicad 139 passed / 1 (pre-existing
occ-probe glb) = the Phase A baseline exactly, wx battery 395/1.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBjomQfKyRa3jBdeAKpmTw
NOT GREEN. resolveWait marks a context-parked waiter ready and arms a pump
instead of resolving a promise nobody awaits.
The doc records the measured correction: DoRun parks the MAIN stack every
frame in wxWasmYieldToBrowser, which doc 21 called safe-by-construction only
because dispatch also ran there. With the scheduler swapping contexts from the
tick, those interleave over one currData - overlapped-wake, the exact class
this work exists to remove. So the main loop must become a context (D5) and
the bridges (E) join the same flip: D5+D+C+B+E land together.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EarUW9DS1c1sSW4ZNrkGQS
Gate results (single battery, scheduler-only): wx app battery +
asyncify + coroutine 363 passed / 3 skipped / 0 failed; full kicad
suite 138 passed / 30 skipped / 1 failed — the one failure is the
pre-existing local occ-probe glb case (predates D-1, unrelated).
Post-gate scrubs: vestigial 'startModal' removed from ASYNCIFY_IMPORTS
(tests/apps/Makefile.wasm) and env.startModal from
scripts/common/asyncify-imports.txt (the import no longer exists in any
wasm; both lists are boundary supersets so behavior is identical).
Stale comment pointers to the deleted legacy modal machinery updated.
Doc 20: D-1 work log added, status flipped to IN PROGRESS.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TEHGiiXMShNXbBr7gSJ7iz
Doc 20 D-1, second slice: the injector now injects asyncify-scheduler.js
unconditionally — the WX_SCHEDULER=0 legacy opt-out, the
SHIM_DISABLE_HANDLESLEEP ablation skip, and the
SHIM_DISABLE_TRAMPOLINE_HEAL ablation skip are gone, and
scripts/common/shims/handlesleep.js is deleted (the scheduler subsumed
its capture/restore, fiber guard, and trampoline-heal duties in S2).
Comment-only scrubs point the remaining references at the scheduler
shim. .ci-cache-epoch bumped (shim/injector behavior changed).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TEHGiiXMShNXbBr7gSJ7iz
Injector defaults to asyncify-scheduler.js (WX_SCHEDULER=0 = explicit
legacy opt-out); .ci-cache-epoch 9->10. Doc 17 S5 corrected: the
interlock/busy-gate deletions assumed handler-fibers that S1-S4 never
built — they stay as load-bearing second lines; each real deletion is
ledgered with its unlock condition. Flip gate: full kicad suite 136
passed on BOTH variants (occ-probe glb fails identically on both =
pre-existing; ngspice bg_run = rerun-passes flake).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
asyncify-scheduler.js REPLACES handlesleep.js on WX_SCHEDULER=1 builds
(injector either-or): ports capture/restore, fiber consume-once/
quarantine guard, wake-window flags, recorder, trampoline heal — and
adds deferred wakes (a wake mid-transition queues and drains from a
clean macrotask) plus the N1 currData accessor (pure-JS writes need
scheduler authorization; strict mode throws; meta-tested). Gates:
races 9/9 with NO legacy shim (subsumption), coroutine 39/39,
wx-chromium 30/30, kicad trio 3/3 on the C-lane build.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
Shim embind lane wraps the doc-18 production mutators at the Module
boundary (busy-window calls queue + deliver post-settle; time-boxed
unkillable pump). N2 un-fixme'd and green; collab-load-fuzz carries the
variant contract (drop on legacy, deliver-in-order on scheduler, capped
hammer on the scheduler lane); timer-park's timerRetry silence tripwire
arms on shim+export and is green on the C-lane kicad build. Bump
wxwidgets for the wheel lane. CI both-EH matrix deliberately deferred.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
Doc 17 step S0 scaffolding: WX_SCHEDULER=1 injector path with an
observation-only asyncify-scheduler.js skeleton (legacy shim stays
authoritative until S2), guard-beacon extraction with occurrence
recovery for rate-limited beacons, and the fixme'd N2 ordering spec
(add-then-move probe; un-fixme at S1).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
The editor reported nothing when a session died. Evidence lived only in-tab —
an 800-line React array behind a "Show console" button — so diagnosis meant
asking a user to paste a screenshot.
Better Stack's Error Tracking ingests the Sentry wire protocol, so this runs
the stock @sentry/browser against a Better Stack DSN. Sentry.init installs its
own window error/unhandledrejection handlers, so uncaught main-thread errors
and the wasm traps that escape emscripten's DOM event handlers are captured
with no instrumentation at the throw sites. Not their JS tag: it has no
beforeSend or fingerprint hooks, its runtime spawns workers from cross-origin
CDN hosts (this page is COEP: require-corp), and it ships session replay on by
default — which on a CAD canvas records customers' board geometry.
@sentry/browser is imported in exactly one file so the vendor stays swappable,
mirroring how lib/analytics.ts isolates Plausible.
Also replaces the terminal-signature regex with a shared, unit-tested predicate
(wasm/terminal-error.ts) used by BOTH the fatal overlay and the reporter, so
they cannot disagree. The regex was a type check written as a string match and
had three live holes: `RuntimeError` was listed but never appears IN
`.message`; Chrome's bare "unreachable" and "null function" matched nothing
(the v0.1.20 prod log is exactly those); and narrowing "table index is out of
bounds" to `\bindex out of bounds` for Firefox in 197f317 silently stopped
matching Chrome's spelling. Checking the TYPE — every trap in this family is a
WebAssembly.RuntimeError — covers all engines and ends the spelling chase; the
message patterns remain as a fallback for paths that lose the Error object,
such as a worker ErrorEvent crossing the realm boundary with error: null.
197f317's pthread-worker tap, promote() and Firefox findings are kept as-is.
Notes:
- Off unless VITE_ERRORS_DSN is set AND VITE_ALLOW_USER_OVERRIDE !== "1" (dev
servers and every Playwright harness set the latter, and production builds
never do), so a production DSN in a local .env still cannot report. With no
DSN the whole SDK is const-folded out: 1,193,080 vs 1,282,463 bytes of JS.
- browserApiErrors integration removed. It wraps setTimeout/rAF/addEventListener
in try/catch, which is exactly how KiCad-on-Emscripten drives its main loop.
- Console breadcrumbs off (collab/debug.ts's clog fires per Yjs update and would
evict the ring before any crash); dom/fetch/navigation breadcrumbs kept.
- beforeSend redacts token/apiKey/Bearer — collab/provider.ts puts the collab
token in the y-partyserver URL, so a connection-failure string carries a live
credential — and guards the cascade: one wedge produced 8 errors in prod, and
after the first terminal event the rest are dropped into cascade_count.
Verified end to end against the real EU host from a cross-origin-isolated page:
POST /api/<id>/envelope/ -> 200, and 4 terminal throws produce 1 event
(control: 1 throw, same count).
Privacy policy 9, cookie policy 6 and the licenses page are updated: Better
Stack is disclosed as an EU processor, and the licenses page now describes the
browser app's own JS dependencies, which it never did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every repo moved from emergence-engineering/ to PCBJam/, but the published
source pointers still named the old org. GitHub's transfer redirect resolves
them (all six checked, 301 -> 200), so nothing is broken today — but it stops
working the moment anyone creates a repo at an old path, and a GPLv3
corresponding-source pointer is a poor thing to leave depending on a redirect.
CI never passes --repo, so the hardcoded default is what actually ships: the
editor's version badge on editor.pcbjam.com has been linking users to the old
org for their source.
Covers the source pointers (licenses.md, terms.md 12.4, REPO_URL and its doc
comment, the three build-script --repo defaults, the site footer's build-commit
link) and the two "our GitHub" org links. Bumps the pcbjam-shared pointer for
the same fix there.
Deliberately untouched: emergence-engineering.com, the company domain behind
contact@ and the EE credit block — the trailing slash in the substitution keeps
it out. And docs/security-audit-glm/, which describes a finding rather than
linking anywhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The prod differential ladder finished: staged byte VOLUME on a warm load is
the only trigger left (V1a siblings-without-lib-tables dies, V1b +120 files
survives, V1c sibling KiCad files renamed byte-for-byte dies, V1d Leonardo +
123MB of inert markdown dies on loads 3-4; 14MB never dies). 3D models,
collab/ydoc/presence, lib tables, sibling KiCad handling and file count are
all exonerated — volume only loads the dice on the underlying race.
That made the crash reproducible locally for the first time in six campaigns:
a persistent browser profile + a 110MB project fails every warm load with the
exact prod signature. Iteration is now ~12 minutes instead of a release cycle.
Shim: every fiber switch now records the departing side's remaining asyncify
buffer and its recorded rewind entry (rem=/rf=), which is what identified the
unrewindable capture and disproved buffer overflow. The deferral family is
closed for good — a microtask-deferred retry on a clean empty stack died
identically to the nested rewind, because the suspension is broken at write
time, not by nesting.
Shell: log the origin stack when wx reports the top window destroyed. That
notification fires from ~wxTopLevelWindowWasm for ANY top-level window, so a
transient frame dying mid-load navigates the user out of the editor — a real
bug in its own right, found while chasing the empty flight-recorder dumps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The 96-event recorder ring holds under a second of history at idle tick rate
(~110Hz), so settle-time collision pressure scrolls out before any poll can
read it — the prod dumps only caught the kill because the trap froze the
moment. Scroll-proof totals since boot: every finishContextSwitch increments
fcsTotal; every root entry inside a sleep-wake window increments rootHotTotal
(the fatal precondition). Both appear in the [wx-asyncify] STATE line, i.e.
in every trap auto-dump, every __wxAsyncifyDump() call, and every blue-screen
console — turning ANY prod load (crashing or clean) into a dose measurement
for the differential-repro experiment (which project ingredient generates
collision windows: siblings, 3D models, libs).
.ci-cache-epoch 7→8.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
v0.1.24 in prod, doubly convicted the same morning: the Leonardo open
crawled/hung (open:settled result=failed at the 60s escape, heap never past
256MB — every main-loop iteration runs INSIDE its yield-wake extent, so the
"root-owned wake" scope matched thousands of legitimate nested coroutine
Call/returns per open, each paying a deferred macrotask, throttled to ≥1s in
a background tab), AND the Nano crashed 22ms after deferrals=1 fired.
Harmful and insufficient: the fatal nested-rewind interleave and the benign
bulk are observationally identical at this layer — no discriminator exists.
Retired (second and final retraction, async/16 round 5). What stays shipped
and clean: consume-once root suspensions, the internally-parked quarantine +
laundering check, the flight recorder + beacons, the WSOD floor, the
pendingSleeps leak fix (confirmed by pendingSleeps=[] in the Nano dump). The
rare nested-rewind crash is ACCEPTED and fully observable until the
structural fix — the design-B fiber-first runtime (async/06,12,13), where
one scheduler owns every suspension and this interleave cannot exist.
.ci-cache-epoch 6→7.
Local: fiber 2/2 (one refusal beacon) + timer + firefox sweep 21 passed,
chromium scenarios 11 passed/4 quarantine-skips, web fatal+follow 2/2.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The v0.1.23 flight recorder caught the kill live (console-export-2026-8-1_19-16-8):
dozens of benign fiber round-trips at w=0, the yield cycling healthily on its
buffer — then "fcs … ROOT w=1" and the trap, state frozen at Rewinding with
currData=root+20. The fatal condition, observed rather than inferred: a fiber
round-trip inside the ROOT's OWN sleep-wake continuation re-suspends and
re-rewinds the root nested inside its live wake rewind. Consume-once passed
correctly — it guards a different corruption and stays.
The round-3 deferral was aimed right but unscoped (taxed fiber-owned wakes,
flaked S4). Final form: every fresh sleep is tagged root- or fiber-owned
(fiber ⇔ started inside a finishContextSwitch fiber slice or a fiber-owned
wake; root entries don't count as slices); finishContextSwitch(root) defers
one macrotask ONLY while a root-owned wake is live (Asyncify.__wakingRoot).
Beacon: root-entry-deferred. Verified inert where it must be: zero beacons
across all 13 drift-trio-scenarios logs (26/26 + 25/26-then-26/26 stress —
the single miss carried no beacons, i.e. the pre-existing under-load flake).
Also: resume re-entries no longer push sleep contexts (the v0.1.23 dump
carried ~380 leaked zero-linked entries), and wake events in the recorder are
tagged R/f for ownership.
.ci-cache-epoch 5→6.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The deferral (9ca2ac1) modeled the wrong condition and taxed every parked
fiber completion with a macrotask hop: under CI load that stretched
three-client apply chains and flaked drift-trio S4 twice consecutively
(26/26 green locally under stress) — retracted.
The actual fatal state, readable in all four prod stacks once seen: a SECOND
rewind of the same root suspension. Root suspends once per fiber_swap out of
it; two parked fibers completing against one root suspension epoch (a tool
fiber + a collab fiber both waking around open:settled) each drive
finishContextSwitch(root) — the second rewinds already-consumed data →
"unreachable executed" → poisoned runtime, with the wake-side "index out of
bounds" as the sibling symptom.
Cure: stop exempting root from the validity check the shim already keeps.
First consumption proceeds synchronously — zero added latency anywhere; the
second is refused ([wx-asyncify] "root suspension already consumed") — the
yielded fiber stays properly suspended and resumable, root continues via its
real pending resume, libcontext's ghost-epoch contract enforced one layer
lower. Root remains exempt only from the internally-parked quarantine (its
yield park is routine).
.ci-cache-epoch 4→5 (the epoch-4 cache holds the retracted deferral shim).
Local: fiber 2/2 + timer 1/1, firefox sweep 20 passed, drift-trio-scenarios
kicad-chromium 26/26 under 3-worker stress, web fatal+follow 2/2.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
v0.1.22 still trapped with BOTH guards silent: the fatal rewind's target is
the ROOT context, which layer 2 exempted. All four prod stacks are the same
collision — a fiber completes its yield-back to main while main's sleep-wake
rewind is still on the stack (maybeStopUnwind → trampoline →
finishContextSwitch → doRewind(root) → unreachable), two "resume main" paths
interleaved in one tick; the 8ms-earlier "index out of bounds" is the wake
side of the same event.
Root entry is legal and constant in healthy flow; only the wake-window
overlap is fatal. So: serialize, don't refuse. The shim marks the
synchronous wake window (Asyncify.__inSleepWake around wakeUp) and DEFERS a
root finishContextSwitch landing inside it by one macrotask
([wx-asyncify] root-entry-deferred beacon, trampoline retry) — an ordering
change only, nothing dropped. Suspension recording happens before the
deferral branch, so the yielding fiber's validity survives the wake chain
nulling currData.
Plus a flight recorder: a 96-entry ring of asyncify/fiber events (sleeps,
wakes, every context switch with ROOT/wake-depth, refusals, deferrals),
silent in normal operation, auto-dumped with full machine state next to the
first trap signature in the console; window.__wxAsyncifyDump() on demand.
The next prod export reads like a black box, not a stack-shape puzzle.
.ci-cache-epoch 3→4 (wasm cache key omits scripts/**).
Local: fiber-resume-park 2/2 (one refusal beacon), timer-park 1/1, sweep 20
passed, web fatal+follow 2/2.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
v0.1.21 still trapped with ZERO jump-refused beacons: the fatal swap PASSED
the C++ swap_suspended guard. Mechanism (async/16 round 2): a fresh JS entry
executing while g_current_context still points at a parked fiber gets
attributed to that fiber — fiber_swap writes a fresh, valid-LOOKING foreign
suspension into the parked fiber's struct and re-marks the flag. The flag
lies; the resume rewinds garbage.
This guard tracks truth at the emscripten-fiber layer (handlesleep.js wraps
Fibers.finishContextSwitch):
- valid suspensions = real swap-outs (currData == oldFiber+20 when the
trampoline runs), consumed on rewind;
- internally-parked = an entered slice that ended in a handleSleep park
(currData set, no nextFiber) — quarantined until a GENUINE swap-out,
where genuine means the fiber's pending sleep has resolved
(__pendingSleepContexts), so a laundering write cannot lift it;
- entering a quarantined or suspension-less fiber is REFUSED
([wx-asyncify] fiber-resume-refused, ghost contract).
The ROOT context is exempt from quarantine and refusal: its rewound
continuation runs the whole main loop, whose routine yield park says nothing
about a fiber body — the first build of this guard quarantined main off that
signal and starved every coroutine return (19 collab e2e reds, empty
results). Root = the old side of the first switch ever.
.ci-cache-epoch 2→3: the wasm output cache key omits scripts/**.
Red/green: fiber-resume-park.spec.ts scenario 2 (laundered resume → exactly
one refusal beacon, both coroutines complete); full fiber-heavy sweep green
(21 passed).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The shim has been silently restoring Asyncify.currData across overlapping
parks since it was written — so a prod console dump could never say whether
the #9153 family fired, mislinked, or was bypassed. Rate-limited [wx-asyncify]
reporting, calibrated against the timer-park e2e (2 rounds, 2026-07-31):
- concurrent-park: a FRESH park (state 0) starting while another chain's
currData is live. state-2 entries are NOT reported — every legal resume
re-enters handleSleep while Rewinding (~100/s measured on a healthy run).
- reentrant-state: handleSleep entered mid-unwind (state 1) — never observed;
if it ever fires it IS the bug.
- aliased-wake-live / overlapped-wake: the restore actually repairing —
dangerous (other chain still parked) vs benign (other chain done). The
e2e observed 8 live cross-restores in one run, all survived.
Console.log only, no printf plumbing needed; stacks name the parker
(__asyncjs__wxWasmYieldToBrowser vs _emscripten_sleep etc.).
.ci-cache-epoch 1→2: the wasm output cache key omits scripts/**.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The v0.1.14.1 release gate died in "Build wxWidgets (wxUniversal WASM)" with
"No rule to make target 3rdparty/pcre/src/pcre2_chartables.c". Nothing in the
tree changed wx — the submodule is the same SHA that released fine as v0.1.13
— and the two main CI runs on this tree built wx and went on to run e2e. The
restored build-wasm/wxwidgets cache is the variable: pcre's makefile rm's that
path and re-links it to pcre2_chartables.c.dist at configure time, so a cache
captured around that window restores a tree whose pcre rule cannot be
satisfied from a clean checkout.
CI's wx cache key hashes scripts/build-wx-wasm.sh, so a header edit is the
lever that discards it. Documented as an explicit epoch counter there, since
the next person hitting this will not guess that editing a build script is how
you evict a cache.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H8jo7zz1ZwzYpjJ64UZKN4
Two consecutive publish-libs runs died on runner-side CF API flakiness (a 502
mid-put, then 'terminated' on the first probe). Gets and puts now retry with
backoff; a definitive missing-object error still returns null immediately.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011CC8aAnUUHcnHy3QCJtUwb
A CF API 502 on the manifest.json probe made publish-libs misdetect an
already-published tag as unpublished and start a full republish (byte-identical
immutable content, so harmless — but ~30 min of redundant uploads before a
second 502 killed it). Only wrangler's definitive missing-object error now
reads as absent; anything else throws.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011CC8aAnUUHcnHy3QCJtUwb
Cold loads on versioned CDN deploys now show a consent card (editor MB +
symbol/footprint lib figures, downloaded-now vs on-demand) and wait for OK
before any big fetch; warm loads skip it and show truthful stages (loading
from cache / Compiling / Starting KiCad) instead of the first-download line.
- wasm-assets: resolveWasmMeta (bundle/ver/sizes), download-completion marker
keyed by content-addressed bundle/ver, update wording, auto-download opt-out,
HEAD size fallback
- boot: manifest raw size as the progress total (fixes the br/gzip
Content-Length mismatch), marker written after download+instantiate succeed
- cdn-source: syncState() — IDB warmth peek + sizes.json cold sums
- synced-source: syncState() from the backend envelope's sync refs (private
platform); remote-source passes libSchema.sync through
- publish-wasm: manifest schema 2 with per-bundle sizes (registry-persisted,
reuse + snapshot modes); publish-libs: sizes.json sibling key + top-up mode
- fixed 4 stale unit tests (bundle mapping, session-identity email)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011CC8aAnUUHcnHy3QCJtUwb
brotli q11 over the ~320MB wasm set ran serially on one core (~0.4MB/s),
dominating the release publish job. Compress every to-be-uploaded file
concurrently on the libuv threadpool (compressBytesAsync + UV_THREADPOOL_SIZE
sized to the machine), so wall time drops from sum-of-files to roughly the
largest single file (kicad_editor.wasm): 329s for the full set locally vs
~11.5min of CPU. Upload ordering invariants unchanged: meta.json still last
per tool, registry last overall; moved-tag guard and reuse path untouched.
Also adds BROTLI_PARAM_SIZE_HINT and moves the publish-wasm job to
ubicloud-standard-8 so there is a core per file.
Verified byte-identical CDN layout vs the old script (local driver, pinned
builtAt), blob roundtrip to source sha, reuse + --from-registry modes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JQ9npuB6uLvkv6gzBV5GPh
Redirects from emergence-engineering still work, but fresh clones and CI
checkouts should reference the real home.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y32etYBCKV6t1qDoLoGmgF
Vercel was doing the apex->www 308 itself (its "redirect to www" project
setting), so nothing about Cloudflare requires a redirect — the behaviour
just disappears with Vercel. Rather than rebuild it with a zone Redirect
Rule plus a proxied placeholder record, attach pcbjam.com as a SECOND
custom domain on pcbjam-site. Both hosts serve the site and the pages
already emit canonical=www, which is what consolidates them for search.
That drops the riskiest artefact in the migration. Redirect Rules are
zone-scoped and run BEFORE Workers/Pages routing, so a `contains` match
instead of `eq` would 308 app./editor./demo./api. to www — breaking the
product API, not just a marketing page. The sibling hosts are also the
reason this was worth avoiding rather than merely guarding.
APEX_MODE (lib/common.sh) selects the topology, defaulting to `serve`.
08-verify-prod.sh now dispatches through assert_apex: in serve mode it
requires the apex to answer 200 with no hop, to not be a stale Vercel
response, to declare canonical=www, and to expose /api/waitlist. The
`redirect` mode and 07's rules/apex phases are kept for the alternative.
08 also checks the attached domains via wrangler rather than the REST API,
so the whole serve-mode path needs only `wrangler login` — no zone scopes
at all.
Comments that explained themselves via the old redirect are corrected:
astro.config.mjs, web/standalone/src/lib/config.ts and
scripts/deploy/build-demo.mjs. The demo keeps posting to www — not because
the apex redirects, but because a CORS preflight cannot follow one, so
aiming at a host that might ever redirect is a latent breakage.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LAmkjM7okPdScp9XLW1JVr
Two generic (manufacturer-agnostic) pcbnew-side subcommands for platform
manufacturing plugins: --ipc356 (IPC-D-356 netlist via IPC356D_WRITER) and
--fab-components (board metrics + per-footprint placement/BOM JSON —
absolute board coords, consumers apply their own conventions). Bumps the
kicad submodule for the diet keep-back of export_d356.cpp.
Also closes a CI cache gap: wasm-cache-hash never hashed wasm/**, so a
pure wasm/cli change would cache-hit stale output — { dir: "wasm" } is
now an input (busts the cache once on landing).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Mr8PQ34yCfvEtEcwSUvLAV
VITE_APP_URL (build-editor --app-base, set to app.pcbjam.com in release CI)
turns on a redirect gate in App: home, project overview and mgmt-only paths
bounce to the mgmt app preserving path+search; tool boots, file deep-links,
lib editors and the @local pseudo-scope stay local. Unset (dev/demo) keeps
today's behavior. Policy is a pure helper (lib/redirect.ts) + vitest table.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A42xfPFNdfsUt9eowkC9eM
The wasm-opt bench VM cloud-init seed carried a committed console/SSH password
and enabled SSH password auth. setup-vm.sh already requires and injects an SSH
pubkey, so lock the password (lock_passwd: true) and disable SSH password auth
(ssh_pwauth: false).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
All pcbjam properties now load the same new-format Plausible script
(https://plausible.io/js/pa-KjNS9YmidydULZTstsjRg.js — one dashboard,
segment by hostname) instead of per-domain data-domain sites:
- site: replace Vercel Analytics with the pa- snippet in BaseLayout
(is:inline, prod-only, crossorigin="anonymous" for the COEP
require-corp routes in vercel.json); drop @vercel/analytics dep.
Legal pages (cookies/privacy) rewritten Vercel -> Plausible.
- standalone: initAnalytics() rewritten for the new script format
(queue shim + plausible.init(), async, no data-domain). The gate is
now VITE_PLAUSIBLE_SRC (script URL, deploy-time opt-in) — unset means
no tracking, so dev checkouts and third-party GPL builds stay clean.
VITE_PLAUSIBLE_DOMAIN is gone.
- deploy: build-demo/build-editor --plausible now takes the script URL;
release.yml/deploy-demo.yml hardcode the (public) pa- URL, so the
repo Actions variable PLAUSIBLE_DOMAIN is no longer used.
Verified: standalone tsc + vite build (pa- URL present with env, absent
without, crossOrigin kept); astro build has the snippet on all layout
pages and no vercel/insights references; astro dev stays untracked.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New wasm/cli/sym_convert_stubs.cpp: first-definition-wins overrides
(--allow-multiple-definition) severing schematic load/save, the KIFONT
factory (drops newstroke + freetype/harfbuzz), and the four UI virtuals
whose bodies reference pruned typeinfo/data. New
wasm/bindings/sym_convert_embind.cpp: no-op kicadCollabOnSave so the
converter stops linking eeschema's embind object (and --bind) that rooted
the editor surface from .init_array. build-kicad-target.sh: per-app
EMBIND_LINK_FLAG + sym_convert now uses its own embind TU. Bumps kicad
(kiface prune, gated). Output byte-identical on the qa corpus.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H58sC87w12FotXEmxrJrQV
New release.yml job `deploy-editor` (parallel to deploy-demo, same per-tag
WASM manifest): builds the standalone in REMOTE mode via the new
scripts/deploy/build-editor.mjs — projects/libs/auth from the closed API
(VITE_API_BASE_URL=https://api.pcbjam.com, VITE_LIBS_SOURCE=synced), Yjs
board rooms through the API host's path route (VITE_YJS_ENDPOINT=api origin,
doc source ydoc) — and ships it to the pcbjam-editor Pages project. The
demo deploy is unchanged. The closed stack itself (api./app.pcbjam.com)
deploys from pcbjam-private; when both sides change, that repo tags first.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014dasZuqo6FStgT3rkC85im
The merged kicad_editor bundle made the chooser's footprint side reachable
from a schematic session; this wires up the data:
- boot.ts/constants.ts: every kicad_editor frame seeds BOTH sym-lib-table and
fp-lib-table (+ placeholder files; a created user lib joins both lists) —
the eeschema frame used to write fp-lib-table empty, leaving the selector
dead. TOOL_LIB_KIND remains only the presync/primary-kind lever.
- publish-libs.ts + kicad-pretty.ts: publish fp-index.json per tag —
[name, uniquePadCount] per footprint (countUniquePads mirrors KiCad's
GetUniquePadCount(DO_NOT_INCLUDE_NPTH)); index-only top-up mode for
already-published immutable tags.
- source.ts/cdn-source.ts: new bridge op "index" (source-global, dispatched
before the lib-id parse) + LibsSource.getFpIndex; the CDN source fetches
<tag>/fp-index.json once (404 ⇒ null ⇒ C++ default-only fallback).
- dev-demo.mjs: --libs-local serves a local publish-libs layout same-origin
at /libs-cdn (mirrors --models-local).
- tests/web/eeschema-fp-selector.spec.ts: e2e — chooser opens in --frame=sch,
selector fills from ONE index crossing, clicking a row per-item-gets the
body and the cross-face GAL preview renders; adaptive for index-less
sources (asserts crash-free default-only selector).
Submodule bumps: kicad (index-backed filterFootprints + preview AsyncLoad
fix + modal-pump crash guard), wxwidgets (modal pump logs e.stack).
Doc: pcbjam-private docs/features/libs/0014-eeschema-footprint-selector.md
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SCWVaCRM9T847PdPwYYajX
The demo (demo.pcbjam.com) cross-posts the waitlist to the marketing site's
serverless endpoint. It targeted the apex pcbjam.com, which 308-redirects to
www on Vercel; a CORS preflight can't follow redirects, so the OPTIONS failed
("Redirect is not allowed for a preflight request") and the POST never landed.
Point the waitlist target at the canonical www host. www.pcbjam.com already
returns 204 with access-control-allow-origin: https://demo.pcbjam.com, so the
preflight passes. Landing/version-badge link stays on the apex.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01REwWZGkAz1AZUJw8yqxkCN
- gl1_glu: gluCylinder/gluDisk/gluSphere per the SGI GLU reference
tessellation (sin/cos phase, strip emission order, pole fans — Apple's
GLU derives from the same source, so vertices match the goldens);
emission goes through the public glBegin/glVertex entry points so
quadrics record into display lists
- glLineWidth>1 one-time warning (browsers clamp to 1; affected coverage
stays under the parity floor — zero floors.json overrides needed)
- production link site: build-kicad-target.sh now compiles wasm/gl1 from
sources.txt and applies wrapped_symbols.txt --wrap flags (same manifests
as the test harness); kicad_editor's RENDER_3D_OPENGL links against the
real emulation layer instead of no-ops
- wasm/stubs/gl_ffp_stub.c deleted (role fully superseded; history in git)
- docs: 3d-regression README port-status section (floor-blind small
geometry + line-width caveats), harness comments de-red-stated
Parity: 47/47 under the 0.02 floor, zero overrides. Native golden path
byte-identical to bb0e238 (whose gate ran green) — scenarios/, native/,
baseline/, manifest, floors, spec all untouched by the port.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
tests/3d-regression mirrors the gal-regression pattern at renderer scale:
shared C++ scenarios call real KiCad 3D-viewer code (opengl_utils, display
lists + DrawCulled stencil subtraction, MODEL_3D VBOs, private generators via
a rob-template accessor, and full reload()+Redraw() composites over a
synthetic BOARD_ADAPTER). A native macOS harness renders them on real OpenGL
into 47 committed goldens (bit-deterministic, FBO capture); the wasm harness
compiles the same TUs against wasm/stubs/gl_ffp_stub.c no-ops so every
scenario renders blank — the TDD red state (parity meter: 47/47 changed).
Comparisons use the CI pixelmatch engine via the new generic compare-dirs.ts
(floors.json levels; manifest.json cmp-guards registry drift).
Documents an upstream bug: appendPostMachiningGeometry's countersink path
adds middle quads without normals, silently erasing the walls of any
display list it is batched into (3d-post-machining.png keeps the lists
separate to record it).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Move OpenCASCADE out of the merged editor image into occ_service: a separate
emscripten module (-sASYNCIFY=0, MODULARIZE, in-container -Oz finalize, 2N+8
pre-warmed pthread pool) booted lazily in a dedicated Web Worker on the first
STEP export or STEP/IGES model parse. kicad_editor.wasm ~190 MB -> 130 MB;
sessions that never touch OCC never fetch its 57 MB. STEP export works in the
browser for the first time: the unchanged desktop dialog runs EXPORTER_STEP,
whose wasm shadow suspends into globalThis.occService and the export bytes go
straight to a browser download (never entering the editor heap). STEP/IGES 3D
models parse in the worker via the oce shadow (S3D WriteCache/ReadCache wire).
- wasm/occ-service/: service CMake target (hooked from the kicad fork's
top-level CMakeLists, wasm/editor pattern), embind entry
(occExport/occLoadModel), wxConfig pre-js.
- wasm/stubs/{exporter_step,oce_plugin}_stub.cpp: EM_ASYNC_JS worker bridges
(callee-shadowing; no caller #ifdefs).
- web/standalone: provider installed whenever the kicad_editor bundle boots
(cross-face safe); ONE shared worker-boot source occ-worker.js (vite ?raw;
the e2e stub reads the same file) — blob worker with locateFile absolutized
against the glue URL; export download-name guard.
- deps: OCC builds with RapidJSON so its glTF/GLB writer exists — pinned to
the vcpkg master snapshot 2025-02-26 (24b5e7a8b27f), the same code official
KiCad consumes via vcpkg.json's opencascade[rapidjson]; rapidjson's latest
tag (v1.1.0, 2016) is ill-formed under modern clang.
- tests: occ-export dialog e2e (lazy-fetch boundary + STEP download bytes),
occ-probe incl. a 9-format matrix (step/stpz/brep/xao/ply/stl/glb/u3d/pdf),
3d-viewer-models hard-asserts the worker parse; occ provider stub installed
ambiently by the kicad fixtures.
Validated against desktop kicad-cli 10.0.4: geometric exact equality (bbox
delta 0 um, volume delta 0.0000%) for STEP/GLB/STL/BREP/STPZ across three
boards and option sweeps — with desktop OCC 7.9 vs wasm OCC 7.8; PLY/XAO/PDF
structurally equal; U3D same-size (quantizer float LSBs differ). Full kicad
e2e green on Firefox and Chromium; standalone verified end to end (lazy fetch
only on the Export click; export.step 60,628 B ISO-10303-21; loadModel 700 KB
STEP -> 569 KB scenegraph cache).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
All four editors (PCB / Footprint / Schematic / Symbol) are now runtime --frame
choices of a single kicad_editor.wasm (178 MB at -O1 vs 147+82 separate; shared
wx/common/boost linked once). One editor per page load, as before; frames pcb /
fpedit / sch / symedit.
- wasm/editor/: the merged executable target (single_top + both kiface library sets,
whole-archive pcbcommon) + the safety-net focus-walk Kiface() dispatch TU. Gated by
KICAD_WASM_MERGED_EDITOR (kicad submodule bump carries the fork side: per-engine
Kiface/getter binding + ODR renames + dual-kiface launcher).
- wasm/bindings/: per-editor collab entries renamed pcbCollab*/schCollab* (JS names
unchanged); duplicate kicadOpenFile/kicadCollabOnSave + shared-name registrations
guarded behind KICAD_MERGED_EMBIND; new kicad_editor_embind.cpp registers each
shared JS name once, dispatching on the live frame.
- Build: kicad_editor app (build wrapper, target case arms, 3-object embind compile
with the ABI-critical flags, STUB_APP=pcbnew); docker/build.sh "all" =
kicad_editor calculator pl_editor gerbview (pcbnew/eeschema stay as explicit debug
apps); scripts/kicad/audit-merged-symbols.sh = repeatable ODR-collision audit (run
on kicad bumps).
- Frontend: Bundle type (bundle ≠ tool); TOOL_BUNDLE maps all four editors to
kicad_editor; explicit --frame tokens for pcbnew (pcb) and eeschema (sch); publish
list = the 4 real bundles.
- Tests/CI: five harnesses load kicad_editor.js with explicit frame tokens;
PCBNEW_FAMILY_SPECS renamed BIG_MODULE_SPECS + the 8 eeschema-family specs (they
now boot the merged module — SpiderMonkey x86 CI OOM routing); frame-runtime spec
covers all four frames from the one bundle.
Validated so far: frame-runtime 4/4 (each frame boots with the right title, no
aborts, no duplicate embind registration); 24-spec merged-module regression green;
3D raytracer renders. Known pre-existing failure: 3d-viewer title-bar drag deadlock,
fixed on main by 7630c7e (2N+8 pthread pre-warm) — picked up by the follow-up rebase.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The footprint and symbol editors are no longer separate WASM bundles: the frontend loads the parent pcbnew/eeschema bundle and passes --frame=fpedit / --frame=symedit (TOOL_BUNDLE + TOOL_FRAME -> Module.arguments in boot). Drops the two duplicate build+deploy targets and their wrapper scripts + vestigial embind; adds low-level harnesses (footprint_editor.html, symbol_editor.html) and a runtime-frame spec. Bumps the kicad submodule to the runtime --frame launcher.
The frame-runtime spec is listed in PCBNEW_FAMILY_SPECS so CI routes it to the chromium-ci (V8) project — its footprint case boots the pcbnew module, which OOMs SpiderMonkey on x86 CI. Includes the editor-unification dossier (research docs 01-04 + the as-built implementation record 05).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
