v0.1.21 still trapped with ZERO jump-refused beacons: the fatal swap PASSED
the C++ swap_suspended guard. Mechanism (async/16 round 2): a fresh JS entry
executing while g_current_context still points at a parked fiber gets
attributed to that fiber — fiber_swap writes a fresh, valid-LOOKING foreign
suspension into the parked fiber's struct and re-marks the flag. The flag
lies; the resume rewinds garbage.
This guard tracks truth at the emscripten-fiber layer (handlesleep.js wraps
Fibers.finishContextSwitch):
- valid suspensions = real swap-outs (currData == oldFiber+20 when the
trampoline runs), consumed on rewind;
- internally-parked = an entered slice that ended in a handleSleep park
(currData set, no nextFiber) — quarantined until a GENUINE swap-out,
where genuine means the fiber's pending sleep has resolved
(__pendingSleepContexts), so a laundering write cannot lift it;
- entering a quarantined or suspension-less fiber is REFUSED
([wx-asyncify] fiber-resume-refused, ghost contract).
The ROOT context is exempt from quarantine and refusal: its rewound
continuation runs the whole main loop, whose routine yield park says nothing
about a fiber body — the first build of this guard quarantined main off that
signal and starved every coroutine return (19 collab e2e reds, empty
results). Root = the old side of the first switch ever.
.ci-cache-epoch 2→3: the wasm output cache key omits scripts/**.
Red/green: fiber-resume-park.spec.ts scenario 2 (laundered resume → exactly
one refusal beacon, both coroutines complete); full fiber-heavy sweep green
(21 passed).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The shim has been silently restoring Asyncify.currData across overlapping
parks since it was written — so a prod console dump could never say whether
the #9153 family fired, mislinked, or was bypassed. Rate-limited [wx-asyncify]
reporting, calibrated against the timer-park e2e (2 rounds, 2026-07-31):
- concurrent-park: a FRESH park (state 0) starting while another chain's
currData is live. state-2 entries are NOT reported — every legal resume
re-enters handleSleep while Rewinding (~100/s measured on a healthy run).
- reentrant-state: handleSleep entered mid-unwind (state 1) — never observed;
if it ever fires it IS the bug.
- aliased-wake-live / overlapped-wake: the restore actually repairing —
dangerous (other chain still parked) vs benign (other chain done). The
e2e observed 8 live cross-restores in one run, all survived.
Console.log only, no printf plumbing needed; stacks name the parker
(__asyncjs__wxWasmYieldToBrowser vs _emscripten_sleep etc.).
.ci-cache-epoch 1→2: the wasm output cache key omits scripts/**.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
Replace the legacy Emscripten JS-exceptions model with native wasm-EH (legacy
encoding) across the whole build, keeping Asyncify coroutines working via a
from-source Binaryen --hoist-cpp-catches pre-pass. Net result: native-EH is the
only build mode, the 3D viewer is on by default, and pcbnew shrinks substantially.
Highlights:
- Binaryen submodule everywhere + --hoist-cpp-catches integration in apply-asyncify;
post-link Asyncify covers every app wasm (not just standalone test wasm).
- Build deps (incl. OpenCASCADE without OCC_CONVERT_SIGNALS) and all KiCad apps
with -fwasm-exceptions; emscripten_sleep added to the post-link asyncify-imports.
- libcontext fiber entry wired under native exceptions; while-loop main loop +
currData shim injected into all wx apps.
- Native-EH collab apply fixed: DEBUG-define the embind TU + match all out-of-CMake
C++ TUs' ABI flags to the core, fixing the vtable-layout skew / mis-dispatch.
- 3D viewer enabled by default (real raytracer linked, not the stub).
- Retire the EH-spike scaffolding; flip the asyncify-races ablation pins to
shim-redundancy pins (native-EH stays clean with the legacy shims ablated).
- Fix the asyncify-races quiescence check to not require Asyncify.currData==0:
under the native-EH per-frame-yield top loop the main stack is asyncify-suspended
every frame, so currData legitimately churns (a freed-but-not-yet-nulled buffer,
not a leak). Refresh the pcbnew toolbar screenshot baseline for the new kicad.
- CI: drop the obsolete binaryen_version input/env (the build uses the binaryen
submodule fork's wasm-opt, not a version download); key the wasm-output cache on
the binaryen submodule SHA instead.
Bumps the wxwidgets + binaryen submodules to their squashed feature commits.
Validated green: all 7 apps native-EH (real 3D in pcbnew); KiCad e2e 63/63
Firefox + Chromium (3D viewer renders); wx 336; coroutine 34/34 both engines;
asyncify 7/7 both engines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The asyncify single-slot work, executed red-green (full ledger:
docs/features/asyncify-arbiter/redgreen.md; decisions record:
docs/features/async/07-decisions-and-outcome.md):
- tests/apps/standalone/asyncify-races/ + tests/asyncify/ + dedicated
playwright config: 8 scenarios reproducing the KiCad asyncify failure
family with the kicad-faithful startup topology (pre-park fiber swap →
park throw through the live trampoline). Built in 3 variants; the
SHIM_DISABLE_TRAMPOLINE_HEAL / SHIM_DISABLE_HANDLESLEEP ablation builds
keep the historical hang and index-out-of-bounds crash reproducible
forever (mutation-style pins for the existing shims).
- scripts/common/shims/handlesleep.js: catch the "unwind" park sentinel
in the wakeUp path — when main's last pre-park suspension was a sleep,
the main-loop park throw escaped through that sleep's promise reaction
as an uncaught rejection (the calculator/gerbview console errors).
- scripts/common/inject-dyncall-shims.sh: SHIM_DISABLE_* ablation knobs.
- Spec tightening (the acceptance bar): 'uncaught exception: unwind'
tolerance DELETED from pcbnew/eeschema specs; load-pcb gained a hard
clean-console gate over 5 asyncify corruption signatures.
- wxwidgets pointer bump: modal LIFO resolvers, pump resolve-on-error,
sync clipboard IsSupported (014f67e6c1).
Final state: asyncify suite 7/7, wx e2e 291/292 (1 skip), KiCad e2e 40
passed / 2 skipped with ZERO corruption signatures in any log across all
six apps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two things, both verified in the real web app (two-tab eeschema collab).
1. dynCall crash fix (all apps) — scripts/common/shims/dyncall-binding.js.tmpl.
Programmatic editor edits trapped with 'indirect call signature mismatch': the
asyncify-instrumented wasmExports[dynCall_<sig>] trampoline does call_indirect with a
stale type for some table indices (post-asyncify+O2) even though the table entry is
valid. Proven by patching the built js: at the trap getWasmTableEntry(index) SUCCEEDS
where the trampoline fails. Fix: the shim now catches the 'signature mismatch'
RuntimeError and falls back to getWasmTableEntry; the Asyncify unwind sentinel and real
exceptions re-throw, so instrumentation/unwind is untouched for normal calls. This
unblocks ALL programmatic edits, not just collab (e.g. eeschema SCH_ITEM::Move).
2. eeschema collab apply converters (wasm/bindings/eeschema_embind.cpp).
doApply now handles added-item construction (build the SCH_ITEM with the delta's uuid
via const_cast — as the s-expr parser does — + commit.Add) and richer SCH_LINE
serialization (start/end/layer) so wire edits reconstruct on the peer. Implemented for
SCH_LINE (wires) + SCH_JUNCTION; other types log 'no converter for added type' and are
skipped (next batch). eeschema re-enabled in the web app collab gate.
Tests: eeschema-collab.spec snapshot (green); apply/two-tab skipped — they no-op headless
because the e2e harness's kicadOpenFile returns false (OpenProjectFiles bails before
building the connectivity graph), so SCH_COMMIT::Push doesn't persist. Verified in-app.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- build-pcbnew.sh: add --diag=<gal,coroutine,ctor,all> -> -DKICAD_DIAG_*,
off by default (forwarded by docker/build.sh)
- diagnostics.js: emit at console.log level (no longer error/warn); still
gated by SHIM_DIAGNOSTICS=1
- apply-asyncify.sh: exclude PCB_EDIT_FRAME::setupUIConditions() from
asyncify instrumentation (V8 cannot run the instrumented huge function
on the rewound ctor stack -> Chrome startup stall; Firefox unaffected)
- DEBUG.md: reusable WASM/asyncify/browser debugging guide, diagnostic
flag docs, and a production-build (release + -O2 asyncify) recipe
- tests: standalone coroutine vcall/gl repro probes
- bump kicad + wxwidgets submodules (diagnostic gating / debug cleanup)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Investigation scaffolding for the Chrome-only KiCad coroutine renderer crash.
Adds isolated reproduction probes exercising the coroutine/Asyncify/fiber layer
under KiCad-like conditions, runnable in BOTH Firefox and system Chrome.
- tests/playwright-coroutine.config.ts + test:coroutine:firefox|chrome npm
scripts: run the coroutine specs in Firefox AND system Chrome (the old e2e
config only used bundled Chromium, which never reproduced the crash).
- tests/apps/standalone/coroutine-pthread/: no-wx + pthreads reproduction probes
(fiber-in-main, nested invoke_/dynCall boundaries, RunMainStack, embind,
main-loop/rAF activation) + worker_dom_stub.js for wx+pthreads builds.
- tests/apps/Makefile.wasm: coroutine-pthread{,-main,-nested,-nested-ex,-wx,
-embind,-mainloop} targets.
- scripts/common/shims/diagnostics.js: add EM_ASYNC_JS handleSleep enter/wake
tracking (DIAG_SLEEP) to detect nested-async at the crash.
Findings (details in research notes): every isolated factor so far — direct /
nested / RunMainStack fiber, wx event loop + all 13 scenarios incl EM_ASYNC_JS,
pthreads, and main-loop/rAF activation — runs CLEAN in system Chrome. The
coroutine/Asyncify layer is exonerated; GL/WebGL is the remaining untested factor
(next). The reliable FF-pass/Chrome-fail repro is still the KiCad pcbnew e2e.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The shim bound bare dynCall_* names to JS getWasmTableEntry() calls, bypassing
the asyncify-instrumented dynCall_* wasm trampolines that -sDYNCALLS=1 provides.
That broke Asyncify unwind/rewind through indirect calls -> "indirect call
signature mismatch" (caught every frame in Firefox; fatal renderer crash in
Chrome). Bind the bare names to wasmExports["dynCall_<sig>"] instead.
Result: the PCBnew "select draw lines" e2e is green in Firefox (tool selects and
draws, zero page errors). Dropped the fiber-stabilization block, the shipped
diagnostic block, and the exportCallStack JS hack (all compensated for the wrong
binding); shim shrank 521 -> ~250 lines.
- scripts/common/inject-dyncall-shims.sh: orchestrator only; injected JS extracted
to scripts/common/shims/
- scripts/common/shims/dyncall-binding.js.tmpl: per-signature binding template
- scripts/common/shims/handlesleep.js: nested-Asyncify handleSleep fix (#9153)
- scripts/common/shims/diagnostics.js: logging-only, opt-in via SHIM_DIAGNOSTICS=1
- tests/package.json: add test:kicad:firefox / test:kicad:chrome scripts
Known issue (tracked separately): Chrome still renderer-crashes on the first
coroutine resume. Asyncify.doRewind replays the deep main-context call stack and
exceeds V8's execution-stack limit (Firefox tolerates the same wasm). Proper fix
is JSPI.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
