Doc 20 §6 D1, second slice: the dedicated test app D1 calls for, plus
the doc 20 §7 risk-1 gate.
tests/apps/standalone/sched-context/ drives the primitives with no wx
linked (a failure can only be the contexts layer) and assertions ON —
unlike the races harness, an emscripten "cannot start an async
operation" state here IS the bug, not a tolerated state. Nine
scenarios, each pinning one invariant; the load-bearing ones:
- parked_does_not_block: a parked context does not stop others running.
This is doc 19's freeze made unrepresentable — there a parked activity
held a global interlock and the UI died; here "parked" simply means
"not runnable", and three workers run past it before it resumes.
- one_transition_in_flight: a context calling drain() gets a no-op, with
a second ready context queued so a buggy nested drain would actually
run something and be caught.
- async_wake: a real macrotask hop (setTimeout → mark_ready → drain),
the shape every production bridge has.
- deep_park_sizing: parks 64 live frames deep to measure what a park
actually costs.
The memory gate asserts the ceiling (peak live contexts, peak bytes),
that nothing leaked (live=0, bytes=0, created==finished), that nothing
was left mid-transition, and that refusals occurred (zero would mean the
illegal-operation scenarios stopped provoking).
Measured here: ~34 B/frame, 2200 B for a 64-frame park, 1 MB peak for 4
concurrent contexts. Recorded with the caveat that the harness's frames
carry three locals each, so this is a FLOOR — real bridges save far more
per frame (libcontext runs 512 K after a 64 K buffer silently
overflowed). The apparatus and its units are validated; the sizing
DECISION needs deep-park numbers from real bridges at D3/D4.
playwright.config: asyncify-firefox now matches every spec in ./asyncify
instead of only asyncify-races* — a new harness there is covered by
construction rather than by remembering to widen the pattern.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TEHGiiXMShNXbBr7gSJ7iz
Squash of experiment/ff-big-modules vs main.
Big-module routing removed: native-EH shrank kicad_editor below
SpiderMonkey's x86-64 code budget (runs 29355049705/29356152413 green on
stock Firefox), so BIG_MODULE_SPECS routing and the baseline-only-JIT
crutch are gone — kicad-firefox and kicad-chromium both run the full
suite, with the module compiled the way real users' browsers compile it.
Per-engine screenshots end to end: stableShot/shotPath write
test-results/<engine>/<name>.png; baselines move to
baseline-screenshots/{chromium,firefox}/ and the whole tools/screenshots
pipeline (compare/promote/manifest/spec-map/changelog/Discord) keys on
<engine>/<name>. Previously Firefox and Chromium renders of one spec
overwrote each other and Firefox renders were never actually gated.
Seeded from CI run 29421380806 (92 new firefox baselines, +24 chromium
web-suite shots); manifest generated from the baseline tree.
One merged playwright.config.ts (kicad/asyncify/coroutine/perf as
projects); ~25 dead npm scripts dropped. The web suite is gated in CI for
the first time ever (4 rotted specs fixed, 5 broken lib-bridge specs
triaged as fixme in docs/features/web-e2e-rot/); cheap lint step after
npm ci; last 26 blind-sleep violations fixed.
SwiftShader retired: CI Chromium renders WebGL on ANGLE → Mesa llvmpipe
(--use-gl=angle --use-angle=gl --ignore-gpu-blocklist; the blocklist flag
is mandatory — llvmpipe is blocklisted and WebGL is silently unavailable
without it) in BOTH configs. Under WORKERS=4 congestion SwiftShader
transiently failed the first post-board-load draw and the recovery
cascade ended in a silent permanent Cairo fallback — that engine flip was
the "~1.2% changedRatio both directions" occ-export baseline flake.
Validated 160/160 across two 80-repeat rigs; full analysis in
docs/features/wx-parity-bugs/occ-export-context-eviction.md. Chromium
baselines shift slightly on llvmpipe — promote once from the first green
run. Deflakes the new coverage exposed: presence baselines settle before
capture; presence fixtures declare current file formats; perf gets its
own outputDir so CI evidence survives; occ-export settles the board paint
before the export dialog; menu-item waits (waitForRenderedByLabel before
clickMenuItem) in 4 specs + the TESTING.md rule.
Web suite runs the PROD build, in parallel: webServer becomes backend
`start` + the standalone's e2e:preview (build-preview.mjs: link-wasm →
stash the public/wasm symlink aside during vite build, build-demo.mjs's
move — then vite preview as the persistent server). The wasm middleware
serves /wasm/* in preview and emits COOP/COEP/CORP itself (a pthread
worker script's own response must carry COEP or Chrome kills it with
ERR_BLOCKED_BY_RESPONSE). VITE_* flags bake at build time;
VITE_ALLOW_USER_OVERRIDE joins turbo globalEnv. fullyParallel + default
workers: 5.2m → 1.4m. Determinism fixes the parallel run exposed:
shared-page specs become serial groups; locks.spec grabs alice's exact
item via the new kicadCollabTestSelectByUuid hook (cross-tab "first
footprint" order is not a ysync invariant); quit specs poll page.url()
(quit supersedes its own navigation — NS_BINDING_ABORTED on Firefox).
Suite: 51 passed / 12 skipped / 0 failed in 1.6m.
CI-coverage gate (lint:ci-coverage): every tests/**/*.spec.ts must be
reachable from the npm scripts the workflows invoke — scraped from
.github/workflows/, resolved through package.json, coverage asked from
playwright --list itself. Rules: uncovered-spec + orphan-project (with a
documented LOCAL_ONLY_PROJECTS allowlist). Gating next to
lint:determinism; 138 spec files / 13 projects accounted for.
Product fixes kept from the investigations (reachable on real GPUs too):
wx 7799fd1be5 — paint flags clear before dispatch + Invalidate always
propagates; kicad 3dcfea5e45 — SwiftShader pass-boundary flush +
per-instance font texture + first-frame GL-error drain (GAL recovery
recovers instead of falling back to Cairo) + the user-facing eeschema
switch navigates again under __EMSCRIPTEN__ (project-sync's
FaceRegistered gate had rerouted it into the hidden sync player; caught
by the newly-gated web suite).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018eUxiPApHgGiu9NFyQfhAq
Make the Playwright e2e + kicad suites deterministic so screenshot flake stops
tracing to timing races.
- Blind page.waitForTimeout -> condition waits (expect.poll, web-first
assertions, waitUntil) + readiness helpers (waitForWxApp, waitForCanvasApp).
Remaining sleeps are documented interaction dwells (annotated).
- Defensive "if element exists" branches -> loud asserts; label-fallback chains
-> normalized clickMenuItemByText. First-run wizard for/if loops removed by
seeding calculator/gerbview/pcbnew HTMLs.
- Screenshots: new stableShot(page, name) settles the render in-page (canvas
hash over rAF) then writes a raw PNG to test-results/ for the existing offline
gate (tools/screenshots vs baseline-screenshots). Replaces toHaveScreenshot,
which did inline compare + its own baselines and had decoupled the specs from
the real gate. scale:'css' pinned.
- retries: 0 in both configs.
- Guard: tests/tools/lint-determinism.ts (npm run lint:determinism) bans blind
sleeps / toHaveScreenshot / inline retries / swallowed catches in specs;
documented exceptions carry a marker. Rules in tests/TESTING.md.
Assertions, coverage, and renders unchanged (semantic-equivalence reviewed;
captures pixel-identical modulo inherent timer/timestamp/3d-raytrace variance).
Both suites green at retries:0 (e2e 340, kicad 92); ~35-61% faster.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVX1pHMvRPYHdp6ZfEawrk
A corrupted homebrew python3 (self-referencing exec wrapper) made the
config-load-time free-port helper hang forever, stalling every playwright
run on the machine. With a timeout the existing catch falls back to the
random-port path instead.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The screenshot report went silent on green CI runs. CI runs four sequential
`playwright test` invocations (wx, asyncify, kicad, perf) that all default their
outputDir to `test-results`; Playwright clears the whole outputDir at the start
of every run, so each suite wiped the previous suite's screenshots. By the time
`compare` ran, only perf-*.json remained -> all 354 baselines read as "removed"
-> the no-render guard stayed silent.
- Gate Playwright's outputDir off test-results/ in CI only
(process.env.CI ? 'pw-artifacts/<suite>' : 'test-results') in the wx / asyncify
/ kicad configs, so the committed-baseline screenshots (page.screenshot to
'test-results/...') accumulate in test-results/ across the suites for compare.
Local single-suite behavior is unchanged.
- post-discord: replace the silent no-render guard with a loud, image-less
pipeline alert ("No screenshots produced this run") when 0 render; genuine
partial removals still post as the normal capped REMOVED list.
- gitignore pw-artifacts/; upload tests/pw-artifacts/** as a CI artifact.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The canvas (wxUniversal) mode is gone (wxwidgets submodule); remove every
piece of side-by-side plumbing so there is exactly one build and one test
flow:
- scripts/build-wxuniversal-wasm.sh -> scripts/build-wx-wasm.sh; no
--dom/--enable-universal; builds into build-wasm/wxwidgets
- build-wasm-test.sh: no DOM_BUILD / apps-dom rsync mirror / PORT=dom;
apps build straight into tests/apps (Makefile.wasm PORT conditionals
collapsed; wx.js + wx-dom.js always pre-js)
- docker/build.sh, build-kicad-target.sh, env.sh: WX_PORT / -dom /
-universal suffixes removed; kicad builds to kicad-<app>, outputs to
output/; wx.js/wx-dom.js copied from the real source path
(/workspace/wxwidgets/build/wasm — the old build-wasm path never
existed and silently failed)
- setup-kicad-wasm.sh: single target dir; the perl wx-dom.js injection is
gone — the 7 checked-in kicad pages now reference wx-dom.js directly
- playwright configs serve apps/; fixtures drop the test-results/dom and
logs/wxwidgets/dom namespacing; boot.spec asserts wxDomPort
unconditionally; pcbnew.spec uses one reference image;
appearance.spec assertions unconditional
- compare/update-baseline-screenshots.sh: --port removed
- tests/gal-regression/wasm/Makefile: links build-wasm/wxwidgets and
carries wx-dom.js as a second pre-js — the gal-webgl suite (30 specs)
now actually builds and runs here (it needed host-side boost+glm via
scripts/deps; the bundle had been missing, timing the whole spec out)
- tests: clickCanvas() dispatches via page.mouse (DOM widgets
legitimately cover the canvas; locator actionability refused the
click); the comprehensive spec drives wxChoice through its native
<select> (browser-owned popup cannot be coordinate-clicked)
- docs: README/CLAUDE.md/build.md script names and dirs;
features/wx-dom-port README reframed (DOM is THE port), visual-notes
bugs 26-28; FindwxWidgets.cmake config label drops 'wasmuniv'
- wxwidgets submodule -> 9dbacc9448 (DOM-only port, fork diff shrunk)
Gate: full wx e2e suite 292 passed / 1 skipped / 0 failed — first run
ever with the gal-webgl specs green (28 scenarios + load + sequential).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Build/test plumbing for the second wxWidgets mode: --dom on
build-wxuniversal-wasm.sh (build-wasm/wxwidgets-dom, no universal,
--disable-tooltips, libwx_wasmu_* stubs) and build-wasm-test.sh
(mirrors sources into tests/apps-dom, PORT=dom). Build script now
reconfigures when Makefile.in or autoconf_inc.m4 regenerate (bakefile
chain). Harness: WX_PORT=dom serves apps-dom, namespaces screenshots
into test-results/dom and logs into logs/wxwidgets/dom; compare/update
screenshot scripts take --port dom with baseline-screenshots-dom.
New port-agnostic boot.spec.ts (green on both ports).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Host-side wxUniversal build + wx test apps (build-wxuniversal-wasm.sh /
build-wasm-test.sh, mirroring the dispatch-only ci.yml) followed by
`npm run test` before the KiCad e2e. The wx suite runs on bundled headless
Chromium; several specs use WebGL (gal-webgl.spec.ts), so the chromium
project gains a CI-gated --enable-unsafe-swiftshader launch arg — without
it newer headless Chromium refuses software WebGL on the GPU-less runner.
First time this suite runs on a working CI runner; treat as experimental.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Suite went 64 failed → 291 passed / 0 failed:
- Makefile.wasm: compile with -MMD -MP and include .d files — stale objects
relinked against a newer wx lib crashed apps at startup with "function
signature mismatch" after any header/vtable change
- playwright(.coroutine).config.ts: pin the server port for the whole run
(resolvePort from playwright-kicad.config.ts); the 60s freshness window made
workers restarted after a failure rotate to a dead port (ERR_CONNECTION_REFUSED
cascade across ~50 tests)
- drop legacy-GL testing: KiCad renders via WebGL GAL (gal-webgl.spec.ts);
remove minimal_test's OpenGL tab/GLTestCanvas, opengl.spec.ts, GL z-order
describes, -sLEGACY_GL_EMULATION + gl_immediate_shim.js from the test build,
and the orphaned GL baselines
- coroutine-pthread repro apps join the `all` target (make clean used to delete
them while all never rebuilt them); clean no longer eats checked-in JS like
worker_dom_stub.js
- bump wxwidgets: guard module-eval document access so wx+pthread apps
(threadpool tests) survive Web Worker eval
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Replace test.skip() with proper expect() assertions when app fails to load
- Remove button-finder utility (no longer needed with element registry)
- Remove kicad tests (tested separately)
- Add findByName/clickByName helpers for bitmap buttons
- Fix element lookups: use clickByName for bitmap buttons, clickTreeItem
for treebook pages, selectComboItem for wxChoice items
- Add SetName() to shape buttons in bitmapbuttons_test.cpp
- Remove verbose logging from print and threadpool tests
- Update README to reflect current test infrastructure
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add source hashing to stamp system (functions.sh) for detecting
when dependencies need rebuild based on source file changes
- Update build-pcbnew.sh to use source stamps for wxWidgets
- Add global-setup.ts to clean logs before test runs
- Add maximize_test standalone test to verify wxFrame::Maximize()
works correctly in WASM (it does - window is 1280x720)
- Update Makefile.wasm with maximize test build rules
The maximize_test proves wxWidgets display detection works fine.
KiCad's 20x20 window bug is KiCad-specific, not a wxWidgets issue.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add pcbnew-load.spec.ts: Tests for WASM runtime initialization
- Add pcbnew.html: Test harness for loading KiCad in browser
- Add setup-kicad-wasm.sh: Script to copy WASM from Docker build
- Add serve.json: COOP/COEP headers for SharedArrayBuffer support
- Update package.json: Add npm run test:kicad and setup:kicad scripts
- Update .gitignore: Exclude generated WASM/JS files from kicad/
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New test apps and E2E tests:
- fontenum: Font enumeration via Local Font Access API (180 fonts)
- textdecor: Text underline/strikethrough decorations
- bitmask: wxMask bitmap transparency with color keys
- regions: Non-rectangular region clipping (union, subtract, complex shapes)
Updates:
- playwright.config.ts: Add local-fonts permission
- WHATWORKS.md: Document implemented features, update test counts
- Makefile.wasm: Add build targets for new test apps
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
wxClipboard:
- Update wxwidgets submodule with full wxClipboard implementation
- Add clipboard async functions to ASYNCIFY_IMPORTS in Makefile.wasm
- Update clipboard tests with correct button positions
- Add clipboard permissions to playwright config
- Update WHATWORKS.md to mark wxClipboard as working
Button Finder Utility:
- Add parametric button-finder.spec.ts for scanning canvas apps
- Utility scans for clickable buttons by detecting console log responses
- Excluded from regular test runs via testIgnore
- Supports APP_URL, START_Y, END_Y, STEP environment variables
- Document usage in tests/README.md
All 91 tests pass.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add tests/ directory with Playwright e2e tests
- Add minimal wxWidgets WASM test application
- Add build script for test app (scripts/build-wasm-test.sh)
- Update wxWidgets submodule with WASM build fixes
- Update .gitignore for test artifacts
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
