A review of the group-E fixes found 13 further defects; ten were introduced by
those fixes, two pre-existed and were merely relocated, one is deferred.
Services / transport
E-10 retireWorker synthesized no bg/exit frame, so sharedspice's s_bgRunning
mirror stayed latched true after a mid-run worker death: Run stayed
disabled and the promised fresh-worker restart was unreachable for the
whole session. Retirement now dispatches a synthetic controlled-exit
straight to the installed handler (never through dispatchEvt — a
fabricated frame must not touch the credit ledger). Driving the repro
exposed two further defects, both fixed here: a replacement worker
trapped on pre-init engine reads, and the rerun's cm_input_path/circ hit
that uninitialized engine before KiCad's validate() re-init (the native
flow assumes a crashed engine survives in-process — true for the dll,
false for a dead worker). Reads now answer their empty shapes pre-init,
writes lazy-init, and init is idempotent per worker engine.
E-19 dispatchEvt acked only AFTER handler(evt) returned, and the sharedspice
client deliberately rethrows non-trap errors — so each throw leaked one
unit of the 64-frame credit window until the stream died with a
misattributed "transport exceeded". The ack moves to a finally in both
service copies; the throw still propagates (the trap machinery needs it).
E-20 the oversize-line path promises to transfer the accepted prefix, but
with the window full that flush only DEFERS, and stopEventStream wiped
the deferred queue — losing the diagnostics that explain the failure.
The terminal notice now carries them as pendingEvents; both hosts
deliver them in order, unacked (the fatal frame is outside the credit
protocol).
E-21 the 30s prefetch deadline discarded every model already collected and
reported nothing. A caller-owned progress sink ships the partials and
the omission reaches the export report. (Awaiting the aborted collection
was rejected: an in-flight source fetch is not abortable — E-4's
original disease.) Plus a serving-candidate memo, so a .wrl ref served
by its .step fallback stops re-probing the miss on every export.
Scheduler
E-14 _terminalizeNativeTrap classified by message substring, so any plain JS
error QUOTING 'Aborted(' or 'out of bounds' permanently bricked a
healthy instance. Now structural only: instanceof RuntimeError plus a
duck-typed name check (verified in this build's glue that abort() throws
a genuine RuntimeError both pre- and post-runtime-init). Module.onAbort
now latches the gate — the authoritative notification, previously
ignored.
E-15 the shim half: _pumpResume gates on terminal (catching wakes already
queued at latch time) and resolveWait refuses on terminal WITHOUT
consuming the entry, so a frame stays visibly parked rather than
resuming inside a trapped module.
E-16 the E-5 handler read the realm-global scheduler at dispatch instead of
its installing module's; also frees the per-line buffer on the non-trap
rethrow path.
E-11 get_vec trusted the worker's res.length over the transferred arrays.
Observed death shape: a 4 GiB std::vector threw an unhandled
std::length_error that exited the editor's main loop. Now clamped, with
the buffers freed on every failure path.
Guardrails (replacing two deferred refactors: e2e→production-code injection and
collapsing the four copies of the worker-lifecycle machinery)
E-18 the source contract asserted comment-string counts — rewording failed
CI while moving a guard outside its #ifdef passed. It now parses the
#ifdef regions and asserts on code.
service-stub-parity.ts pins what the four lifecycle copies must share:
credit-window equality parsed from source, the finally-ack, boot
deadlines, terminal-notice consumption. The transport numbers are now
single-sourced from the worker.
CI actually runs the gates: the web/standalone vitest suites (which had
NEVER run in CI), the reducer, the source contract and the parity tool —
with a NON_PLAYWRIGHT_GATES check so deleting a step re-fails the lint.
E-22 the e2e occ stub's 60s boot watchdog, deleted in a66e109, is restored in
the ngspice-stub shape with a wedgeNextBoot() repro hook.
Every behavioral fix has red-then-green evidence (the reds were captured first).
E-17 (a stale RUNNING cross-stamping the next run's generation under E-6's
transport deferral) is DEFERRED with its analysis recorded — a real fix needs
run identity on the bg frames.
Test hygiene: the dwell lint now requires the mandated ": <why>" and all 47 bare
markers carry their reason; three export-report dwells became modal-lease polls;
exact-ledger assertions became relative deltas; the dead data-wx-dom-id branch,
an unused fault hook and unused receipt plumbing are gone; abort scans, wx
dialog drivers, the sim harness and the vitest FakeWorker are each one copy now.
Bumps kicad and wxwidgets to their findings-group-e tips.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Make the Playwright e2e + kicad suites deterministic so screenshot flake stops
tracing to timing races.
- Blind page.waitForTimeout -> condition waits (expect.poll, web-first
assertions, waitUntil) + readiness helpers (waitForWxApp, waitForCanvasApp).
Remaining sleeps are documented interaction dwells (annotated).
- Defensive "if element exists" branches -> loud asserts; label-fallback chains
-> normalized clickMenuItemByText. First-run wizard for/if loops removed by
seeding calculator/gerbview/pcbnew HTMLs.
- Screenshots: new stableShot(page, name) settles the render in-page (canvas
hash over rAF) then writes a raw PNG to test-results/ for the existing offline
gate (tools/screenshots vs baseline-screenshots). Replaces toHaveScreenshot,
which did inline compare + its own baselines and had decoupled the specs from
the real gate. scale:'css' pinned.
- retries: 0 in both configs.
- Guard: tests/tools/lint-determinism.ts (npm run lint:determinism) bans blind
sleeps / toHaveScreenshot / inline retries / swallowed catches in specs;
documented exceptions carry a marker. Rules in tests/TESTING.md.
Assertions, coverage, and renders unchanged (semantic-equivalence reviewed;
captures pixel-identical modulo inherent timer/timestamp/3d-raytrace variance).
Both suites green at retries:0 (e2e 340, kicad 92); ~35-61% faster.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVX1pHMvRPYHdp6ZfEawrk
- Replace test.skip() with proper expect() assertions when app fails to load
- Remove button-finder utility (no longer needed with element registry)
- Remove kicad tests (tested separately)
- Add findByName/clickByName helpers for bitmap buttons
- Fix element lookups: use clickByName for bitmap buttons, clickTreeItem
for treebook pages, selectComboItem for wxChoice items
- Add SetName() to shape buttons in bitmapbuttons_test.cpp
- Remove verbose logging from print and threadpool tests
- Update README to reflect current test infrastructure
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Update tests to use semantic identifiers instead of hardcoded pixel positions:
- toolbar.spec.ts: Use clickToolbarTool('New') instead of click(box.x + 30, box.y + 45)
- menu.spec.ts: Use clickMenuBarItem('File') instead of click(box.x + 30, box.y + 15)
- layout.spec.ts: Use getSplitterSash() to get actual sash position for drag operations
- aui.spec.ts: Use clickAuiButton('close', 'Properties') for panel button clicks
Also extends element-tracker.ts with:
- WxRenderedElement interface for toolbar tools, menu items, sashes, AUI parts
- findRenderedByLabel(), findRenderedByType() query functions
- clickToolbarTool(), clickMenuBarItem(), getSplitterSash(), clickAuiButton() helpers
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extract common logging code to tests/e2e/utils/
- fixtures.ts: Playwright fixture with automatic log capture
- test-utils.ts: Logging utilities and helper functions
- Each test now automatically captures:
- Console logs with timestamps and log levels
- Page errors with full stack traces
- Log files written per test to tests/logs/
- <test-name>.log for all console output
- <test-name>.errors.log only when errors occur
- Update all 13 spec files to use shared fixtures
- Update README with test structure and logging docs
- Net reduction of ~700 lines by removing duplicated code
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
