env.sh exports a docker-safe JOBS=1 default, and every host build silently
inherited it (the docker kicad path dodges it by passing -j explicitly):
- build-wx-wasm.sh: the intended "${JOBS:-nproc}" fallback sat BELOW the
env.sh source, so it was dead code — full wx builds ran make -j1 on the
Mac and on CI. Compute the all-cores default before env.sh instead
(explicit JOBS/PARALLEL_JOBS still wins); also -j the PCRE pre-build.
- build-wasm-test.sh: same default fix, plus fan the post-link
hoist+asyncify loop out across JOBS with xargs -P. Per-app wasm-opt
can't feed many cores (small modules), so serial stays ~4min even with
BINARYEN_CORES=16; fanning across the 74 independent apps is what
scales. Safe: apply-asyncify is in-place per wasm, injector tmp is
per-js, HOIST_WASMOPT resolved once up front.
- build-gal-webgl-test.sh: make had no -j at all.
Measured on a 16-core M4 Max, clean test-app build: 15m36s (-j1) → 2m08s,
peak RAM 10.7 GB summed across all build processes (64 GB machine; CI
runners have 120 GB). Core counts are always derived from nproc at
runtime — nothing hardcoded, CI workers differ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XeiSRRScdaox5jBueJNcyG
Two fixes for the intermittent wx-build failure on CI (zipstrm.cpp: fatal
error: 'zlib.h' file not found, surviving the serial retry):
- build-wx-wasm.sh: --with-zlib=sys resolves to the Emscripten zlib PORT,
which only `embuilder build zlib` installs — and that ran only in the
configure branch. A pre-configured build dir (CI cache) + fresh emsdk
therefore died on any recompile of a zlib-using TU. Ensure the port
before every make; --force because embuilder stamps the port on libz.a
alone, so a half-populated cache would no-op.
- wasm-build.yml: the cache-restore `touch {} +` stamped files ns-apart in
readdir order; GNU make 4.x compares ns mtimes, so objects touched before
a generated header they depend on (wx/setup.h, pcre2.h via .deps/*.d)
recompiled — a random subset per run, which is what made the failure
flaky. Use one shared timestamp instead: equal mtimes = up to date.
Reproduced + validated locally (remove sysroot zlib.h + one .o → exact CI
failure; with fix, self-heals in 0.5s; Linux make ns/equal-mtime behavior
verified in a container).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XeiSRRScdaox5jBueJNcyG
Replace the legacy Emscripten JS-exceptions model with native wasm-EH (legacy
encoding) across the whole build, keeping Asyncify coroutines working via a
from-source Binaryen --hoist-cpp-catches pre-pass. Net result: native-EH is the
only build mode, the 3D viewer is on by default, and pcbnew shrinks substantially.
Highlights:
- Binaryen submodule everywhere + --hoist-cpp-catches integration in apply-asyncify;
post-link Asyncify covers every app wasm (not just standalone test wasm).
- Build deps (incl. OpenCASCADE without OCC_CONVERT_SIGNALS) and all KiCad apps
with -fwasm-exceptions; emscripten_sleep added to the post-link asyncify-imports.
- libcontext fiber entry wired under native exceptions; while-loop main loop +
currData shim injected into all wx apps.
- Native-EH collab apply fixed: DEBUG-define the embind TU + match all out-of-CMake
C++ TUs' ABI flags to the core, fixing the vtable-layout skew / mis-dispatch.
- 3D viewer enabled by default (real raytracer linked, not the stub).
- Retire the EH-spike scaffolding; flip the asyncify-races ablation pins to
shim-redundancy pins (native-EH stays clean with the legacy shims ablated).
- Fix the asyncify-races quiescence check to not require Asyncify.currData==0:
under the native-EH per-frame-yield top loop the main stack is asyncify-suspended
every frame, so currData legitimately churns (a freed-but-not-yet-nulled buffer,
not a leak). Refresh the pcbnew toolbar screenshot baseline for the new kicad.
- CI: drop the obsolete binaryen_version input/env (the build uses the binaryen
submodule fork's wasm-opt, not a version download); key the wasm-output cache on
the binaryen submodule SHA instead.
Bumps the wxwidgets + binaryen submodules to their squashed feature commits.
Validated green: all 7 apps native-EH (real 3D in pcbnew); KiCad e2e 63/63
Firefox + Chromium (3D viewer renders); wx 336; coroutine 34/34 both engines;
asyncify 7/7 both engines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Standalone wx test apps (contextmenu, scrollbar) + e2e specs proving the
wxScrollBar control, the wxScrolledWindow gutter, and DoPopupMenu.
- KiCad in-app specs: pl_editor + pcbnew canvas right-click context menus and
scrolled-panel scrollbar gutters, with baseline screenshots.
- build-wx-wasm.sh: serial -j1 fallback when the parallel build trips the
intermittent clean-build race (a generated header read mid-rewrite by
concurrent compiles; never happens at -j1). Recovery resumes from built
objects; a genuine error still fails the serial pass.
- Bump wxwidgets submodule (context menus + draggable scrollbars).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The canvas (wxUniversal) mode is gone (wxwidgets submodule); remove every
piece of side-by-side plumbing so there is exactly one build and one test
flow:
- scripts/build-wxuniversal-wasm.sh -> scripts/build-wx-wasm.sh; no
--dom/--enable-universal; builds into build-wasm/wxwidgets
- build-wasm-test.sh: no DOM_BUILD / apps-dom rsync mirror / PORT=dom;
apps build straight into tests/apps (Makefile.wasm PORT conditionals
collapsed; wx.js + wx-dom.js always pre-js)
- docker/build.sh, build-kicad-target.sh, env.sh: WX_PORT / -dom /
-universal suffixes removed; kicad builds to kicad-<app>, outputs to
output/; wx.js/wx-dom.js copied from the real source path
(/workspace/wxwidgets/build/wasm — the old build-wasm path never
existed and silently failed)
- setup-kicad-wasm.sh: single target dir; the perl wx-dom.js injection is
gone — the 7 checked-in kicad pages now reference wx-dom.js directly
- playwright configs serve apps/; fixtures drop the test-results/dom and
logs/wxwidgets/dom namespacing; boot.spec asserts wxDomPort
unconditionally; pcbnew.spec uses one reference image;
appearance.spec assertions unconditional
- compare/update-baseline-screenshots.sh: --port removed
- tests/gal-regression/wasm/Makefile: links build-wasm/wxwidgets and
carries wx-dom.js as a second pre-js — the gal-webgl suite (30 specs)
now actually builds and runs here (it needed host-side boost+glm via
scripts/deps; the bundle had been missing, timing the whole spec out)
- tests: clickCanvas() dispatches via page.mouse (DOM widgets
legitimately cover the canvas; locator actionability refused the
click); the comprehensive spec drives wxChoice through its native
<select> (browser-owned popup cannot be coordinate-clicked)
- docs: README/CLAUDE.md/build.md script names and dirs;
features/wx-dom-port README reframed (DOM is THE port), visual-notes
bugs 26-28; FindwxWidgets.cmake config label drops 'wasmuniv'
- wxwidgets submodule -> 9dbacc9448 (DOM-only port, fork diff shrunk)
Gate: full wx e2e suite 292 passed / 1 skipped / 0 failed — first run
ever with the gal-webgl specs green (28 scenarios + load + sequential).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-06-12 20:19:48 +02:00
Renamed from scripts/build-wxuniversal-wasm.sh (Browse further)
