A review of the group-E fixes found 13 further defects; ten were introduced by
those fixes, two pre-existed and were merely relocated, one is deferred.
Services / transport
E-10 retireWorker synthesized no bg/exit frame, so sharedspice's s_bgRunning
mirror stayed latched true after a mid-run worker death: Run stayed
disabled and the promised fresh-worker restart was unreachable for the
whole session. Retirement now dispatches a synthetic controlled-exit
straight to the installed handler (never through dispatchEvt — a
fabricated frame must not touch the credit ledger). Driving the repro
exposed two further defects, both fixed here: a replacement worker
trapped on pre-init engine reads, and the rerun's cm_input_path/circ hit
that uninitialized engine before KiCad's validate() re-init (the native
flow assumes a crashed engine survives in-process — true for the dll,
false for a dead worker). Reads now answer their empty shapes pre-init,
writes lazy-init, and init is idempotent per worker engine.
E-19 dispatchEvt acked only AFTER handler(evt) returned, and the sharedspice
client deliberately rethrows non-trap errors — so each throw leaked one
unit of the 64-frame credit window until the stream died with a
misattributed "transport exceeded". The ack moves to a finally in both
service copies; the throw still propagates (the trap machinery needs it).
E-20 the oversize-line path promises to transfer the accepted prefix, but
with the window full that flush only DEFERS, and stopEventStream wiped
the deferred queue — losing the diagnostics that explain the failure.
The terminal notice now carries them as pendingEvents; both hosts
deliver them in order, unacked (the fatal frame is outside the credit
protocol).
E-21 the 30s prefetch deadline discarded every model already collected and
reported nothing. A caller-owned progress sink ships the partials and
the omission reaches the export report. (Awaiting the aborted collection
was rejected: an in-flight source fetch is not abortable — E-4's
original disease.) Plus a serving-candidate memo, so a .wrl ref served
by its .step fallback stops re-probing the miss on every export.
Scheduler
E-14 _terminalizeNativeTrap classified by message substring, so any plain JS
error QUOTING 'Aborted(' or 'out of bounds' permanently bricked a
healthy instance. Now structural only: instanceof RuntimeError plus a
duck-typed name check (verified in this build's glue that abort() throws
a genuine RuntimeError both pre- and post-runtime-init). Module.onAbort
now latches the gate — the authoritative notification, previously
ignored.
E-15 the shim half: _pumpResume gates on terminal (catching wakes already
queued at latch time) and resolveWait refuses on terminal WITHOUT
consuming the entry, so a frame stays visibly parked rather than
resuming inside a trapped module.
E-16 the E-5 handler read the realm-global scheduler at dispatch instead of
its installing module's; also frees the per-line buffer on the non-trap
rethrow path.
E-11 get_vec trusted the worker's res.length over the transferred arrays.
Observed death shape: a 4 GiB std::vector threw an unhandled
std::length_error that exited the editor's main loop. Now clamped, with
the buffers freed on every failure path.
Guardrails (replacing two deferred refactors: e2e→production-code injection and
collapsing the four copies of the worker-lifecycle machinery)
E-18 the source contract asserted comment-string counts — rewording failed
CI while moving a guard outside its #ifdef passed. It now parses the
#ifdef regions and asserts on code.
service-stub-parity.ts pins what the four lifecycle copies must share:
credit-window equality parsed from source, the finally-ack, boot
deadlines, terminal-notice consumption. The transport numbers are now
single-sourced from the worker.
CI actually runs the gates: the web/standalone vitest suites (which had
NEVER run in CI), the reducer, the source contract and the parity tool —
with a NON_PLAYWRIGHT_GATES check so deleting a step re-fails the lint.
E-22 the e2e occ stub's 60s boot watchdog, deleted in a66e109, is restored in
the ngspice-stub shape with a wedgeNextBoot() repro hook.
Every behavioral fix has red-then-green evidence (the reds were captured first).
E-17 (a stale RUNNING cross-stamping the next run's generation under E-6's
transport deferral) is DEFERRED with its analysis recorded — a real fix needs
run identity on the bg frames.
Test hygiene: the dwell lint now requires the mandated ": <why>" and all 47 bare
markers carry their reason; three export-report dwells became modal-lease polls;
exact-ledger assertions became relative deltas; the dead data-wx-dom-id branch,
an unused fault hook and unused receipt plumbing are gone; abort scans, wx
dialog drivers, the sim harness and the vitest FakeWorker are each one copy now.
Bumps kicad and wxwidgets to their findings-group-e tips.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
E-8 (re-implemented for JSPI — the codex gate is entangled with the dropped
execution owner; under JSPI a fresh non-suspending JS→wasm entry while
another activation is suspended is structurally safe on its own stack, so
the admission boundary for worker completions is liveness + trap state, not
execution ownership):
- jspi-scheduler.js grows `terminal` (trapped instance; distinct from `dead`),
canTouchNative(), _terminalizeNativeTrap() (WebAssembly.RuntimeError +
cross-realm string classification), and runWaitCompletion(site, token,
prepare, inertResult): prepare runs immediately and owns ALL native work;
stale tokens and dead/terminal instances drop loudly without resolving
(resolving would resume the parked frame inside the damaged module); a
trap latches terminal; a plain JS bug resolves inertResult so the wait
fails instead of stranding. beginWait refuses (token 0) when dead/terminal.
- all four delayed completion sites route their native work through the
gate: 'OCC export completion' (exporter_step_stub), 'OCC model completion'
(oce_plugin_stub — the MEMFS cache write moves inside the gate too),
'ngspice request completion' and 'ngspice vector completion'
(sharedspice_client — every HEAP32/HEAPF64/malloc write inside prepare,
inertResult 1 = transport error). Every wxWasmBeginWait caller in the
stubs bails on token <= 0.
- deliberately NOT ported from codex: ownerModule, enqueueNativeCompletion,
executionBarrier, the byte-credit native-entry FIFO — completions are
one-shot per wait token and stream volume is bounded at the E-6 transport
credit window. Cross-refs logged for group M (M-2/M-6/M-8).
E-5 (re-implemented; codex shape kept, owner APIs replaced with the E-8
gate): js_ngspice_install_events binds the handler to the EXACT installing
module (handler.__pcbjamNgspiceOwnerModule stamp; presence is not identity),
re-installation replaces a foreign module's handler, a superseded handler
disarms itself, native entry goes through installingModule._malloc/
._pcbjam_ngspice_event (never lexical Module), each dispatch checks
canTouchNative() (loud drop on a dead/terminal module), and a trap on the
per-line entry latches the terminal gate.
Tests: scheduler-shim.test.ts +7 (gate happy/stale/dead/terminal/cross-realm/
js-bug/beginWait-refusal). e2e specs updated from the codex line: occ-export
decode-fault recovery (real onmessageerror transition via failDecode, J-4),
ngspice-probe direct-service coverage, eeschema-sim rewritten onto the E-7
applied-generation receipt (codex's executionBarrier await replaced with a
pendingWaits('ngspice') drain poll — the JSPI-line equivalent).
Also bumps the kicad submodule to the E-7/E-9 commit (dd5751038f7).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
download.savannah.gnu.org 502'd through all retries and took out the
2026-08-31 staging CI run. Try savannah, then its mirror pool alias, then
SourceForge — every candidate must hash to FREETYPE_SHA256, so a mirror can
only supply the byte-identical tarball.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MLPKYptXFrxHj5Gu7rhToz
security-audit-v3 #15. download_file already had a verify branch; no caller
used it and every *_SHA256 in versions.sh was a commented placeholder, so a
tampered mirror tarball flowed straight into configure/make and the shipped
WASM.
- versions.sh: 13 pins (cross-checked against Homebrew/Buildroot/nixpkgs/
FreeBSD/vcpkg/boost.org/curl PGP; glm .zip is TOFU), boost/curl/libgit2
versions moved beside their pins.
- all 13 download_file call sites pass "${NAME_SHA256}".
- download_file refuses an empty or malformed pin (PCBJAM_ALLOW_UNPINNED=1
to bootstrap a new dep); file_sha256 prefers sha256sum, falls back to shasum.
- scripts/deps/check-pins.sh: static 3-arg check + offline file:// enforcement
test; runs in wasm-build.yml before the deps cache, on cache hits too.
Expect one cold --build-deps run: the deps-cache key hashes versions.sh.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GcsgJZ77bhZatLAVU8R84H
- wasm core: CORE::onDocChanged() from both collab listeners (local commit AND
remote apply) repaints peers' shapes from the live document + re-checks the
local selection post-settle; PresenceStart registers the bridge listener
- wasm core: cursors on their own overlay trio; shapes repaint only when the
non-cursor snapshot changes; new kicadCollabSetRemoteCursors (cursor-only
update, PEER.id) in both TUs + merged editor + JSPI mutator allowlist
- presence.ts: size-aware trailing throttle for cursor/viewport publishes
(128 KB/s budget) + parsed-peers memo; presence-kicad.ts: cursor-only push
when the shape signature is unchanged
- gateway.ts: honor the `gone` control (removeAwarenessStates)
- specs: kicad stale-after-delete gate, web ghost-peer timing (+diag), unit
select-all budget (pcbjam-shared → 4573a7c)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AScTR39aqyrY5i3ZFHmnMn
- kicadLibsInvalidate: a peer's edit only drops the lib's plugin entry + pcbnew's
PreloadedFootprints (the cache the old reload never cleared — tree/preview/
LoadFootprint/update-from-library kept serving the old body); the fat re-load
now runs lazily or from Update-from-library (kicadLibsReload, which also
clears the preloaded cache)
- usage bridges count the Footprint/Symbol Editor's open copy; update re-opens
an unmodified copy, reports a modified one
- embind TU gets eeschema/symbol_editor on its include path; smoke probes
- kicad → 27051b46e2
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012Wd1r3ewftpV1DBSEArpRa
The staging editor was built with neither --models-tag (no models on the
staging CDN) nor VITE_MODELS_SOURCE, so modelsSourceConfig() returned null,
no model3d handler was installed and every 3D ensure answered "(unserved)"
despite the chunked packages3D ingest being complete on the staging registry.
- build-editor.mjs: --models-source <cdn|registry> → VITE_MODELS_SOURCE
- deploy-staging.yml: editor builds with --models-source registry
- release.yml: prod editor builds with --models-source registry (libs/0016 §6
step 4); MODELS_TAG now only feeds the demo build, which has no closed API.
Prod rollout order: split-lib-kinds + packages3D ingest on prod BEFORE the
next release tag — prod's registry currently has 0 model3d libs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H1iwtBFvQ8CFg966bqSZh2
emcc only runs Binaryen at link -O2+ (link.py: should_run_binaryen_optimizer
returns OPT_LEVEL >= 2) and we link at -O1, so the shipped module had never seen
wasm-opt at all — it kept its entire 19.56 MB name section, ~20% of the editor
(-sJSPI sets ASYNCIFY=2, which suppresses wasm-ld's --strip-debug, leaving
wasm-opt as the only thing that would drop it). Step 8.2 runs it post-link and
in-container, so CI's cached compile phase covers it and the host post-process
stays pure-host.
Default -O2, picked by measuring every level on the same module: -O0 already
captures 27% of the raw win (it is mostly the name section), -O2 costs 23 s and
gives the best frame rate, and -O3/-O4/-Os/-Oz cost 48-132 s for at most 1.5%
more brotli — -O4 is not even smaller than -O3. Targets that already link -O2/-Oz
(occ_service, kicad_tools) are skipped by testing for the target_features
section, which emcc strips whenever it ran the optimizer itself, so there is no
hard-coded target list to drift. Feature flags come from the module's own
target_features section and so cannot diverge from the link.
The perf specs reported requestAnimationFrame ticks as "FPS". That is not a frame
rate: rAF fires on the compositor's schedule whether or not the GAL redrew, and
it read 120/s on a board where the renderer completed zero frames in six seconds.
measureInteractionFps now counts completed GAL frames — runs of draws to the
default framebuffer, exactly one per frame in every AA mode — and drives a pure
middle-drag pan after a zoom-to-fit. Mixing wheel zoom into the drive made the
result depend on where the wheel left the view: +-20% across identical repeats,
against +-2% for pan alone. The report gains a GAL fps column with a regression
flag on the 1x number; rAF is kept so historical runs stay comparable.
CI has no GPU, so its number is a software-rasteriser redraw rate — a regression
signal, not a user-facing frame rate. Method and measurements in the bench report.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
Canvas-only sessions (read-only viewers, hide-UI editors) get two
floating, draggable, closable panels standing in for the chrome-hidden
wx panes, opened from the overlay menu's View section:
- wasm/bindings: layer bridge — kicadLayersGetState/SetVisible/SetActive
(bodies mirror the compiled-in-but-unreachable IPC handlers, applies
on the coroutine lane, fresh state pushed to
window.kicadCollab.onLayersState); setters join the jspi-scheduler
mutator lane.
- standalone: LayerPanel + SelectionInspector on the comments-panel
shell conventions (useDraggablePanel, collapse, persisted state);
local-selection store fed from presence's onSelection in edit
sessions and bindLocalSelectionFeed for read-only viewers (with a
bounded post-gesture pull burst — clarify-menu selections produce no
canvas event); pure item-summary extraction + unit tests.
- kicad submodule: read-only selection unlock (selection live for
inspection; point editors + RMB context menus stay locked).
- tests/web: read-only spec updated — viewer click selects (or pops the
clarify list), RMB context menu suppressed with writer positive
control, Delete still swallowed; new viewer-panels test (eye toggle
round-trip, active layer, panel drag, inspector rows from a real
canvas click).
Record: docs/features/read-only-viewer/0002-viewer-panels.md (root).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011gJ3M1RpeZLeNUUj8jKC4h
1) pcbnew/eeschema two-tab 'a local move propagates A->B' read the
pre-move baseline AFTER kicadCollabTestMoveFirst. The move is queued
through CallAfter + the apply coroutine, and the drain can land
between two consecutive page.evaluate round-trips — when it does
(~50% under CI load, reproduced locally with --repeat-each) orig
captures the ALREADY-MOVED position and the not-toBe poll waits on
itself. Wire tracing showed the bridge working: the moved delta
emits, nothing reverts. Fix: baseline from kicadCollabSnapshot
BEFORE the move. 12/12 green at --repeat-each=4 (was ~50% red).
2) jspi-firefox suites 404'd their harness modules: jspi-stack and
jspi-coroutine build via ad-hoc build.sh (Phase 3 Makefile wiring
TODO) which CI never ran. Wire both into build-wasm-test.sh (its
hash is already in the testapps cache key), and add the _pt pthread
variant that index.html?pt=1 loads but nothing built. jspi-firefox
8/8 green locally.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PmR6goSk7JC17h7fkgGvHG
The runtime is JSPI-only; this removes everything that still pretended
otherwise. Three exhaustive sweeps (C++/JS+build+CI/tests+docs) drove
the inventory; every deletion verified by grep closure + full gates.
Broken-right-now fixes:
- deploy-staging.yml passed the retired opt_level input — the workflow
could not even start. Removed.
- env.sh carried dead exports with a live -sASYNCIFY=1 inside
(WASM_LDFLAGS/PTHREAD_LDFLAGS, zero consumers). Removed; the
WASM_LEGACY_EXCEPTIONS rationale rewritten to the real reason.
- docker/build.sh exported PCBJAM_ASYNC_BACKEND (read nowhere). Gone.
Dead weight removed:
- binaryen submodule (nothing builds or invokes it), wasm-opt-bench
workflow + scripts/bench/, get-wasm-opt.sh, diagnostics.js (242 lines
of Asyncify-API-only code), the KICAD_PIPELINE background-postprocess
scaffolding (existed to parallelize the deleted wasm-opt phase; the
postprocess is a seconds-long node script and now runs inline),
build-monitor's dead asyncify rows, sched-context orphan build
output, dead .gitignore entries, the .jspi-assets spike dir (the two
wf-result research JSONs moved to docs/features/async/migration-evidence/).
- bindings: fiber_park.h + its 12 embind registrations (broken-if-
called under JSPI), the kicadOpenFileStart/OPEN_JOB starter route,
main_stack_runner.h + 5 includes, the always-null context-sleep weak
hook in nanosleep_yield.c.
- shim: the backend field (installed-flag idempotency instead),
noteContextWait (dead both sides), the __wxAsyncifyDump alias (+ the
WasmTool fallback and string-dump normalize branch).
- web: the emscripten-6-ignored mainScriptUrlOrBlob option in boot.ts
(gerber-demo keeps it: it loads the deployed CDN release, which
predates emscripten 6 — noted inline).
Conditionals: all 'backend === jspi' checks reduced to scheduler-
presence checks; races_quiescent re-keyed from Asyncify.state (vacuous)
to real backlog quiescence (resumeReady/mutatorQueue — NOT _windowLive,
which is the probing activation's own window by definition).
Renames (identifiers only, no file renames): ASYNC_LINK_FLAGS→
JSPI_LINK_FLAGS and Makefile ASYNC_LDFLAGS→JSPI_LDFLAGS,
kicadCollabFiberBusy→kicadCollabBusy (embind + web + tests),
collab_common.h fiber*→apply*/coroutine naming, asyncifySignatures→
wasmTrapSignatures (lists byte-identical).
Tests: the two remaining vacuous [wx-asyncify]/fiber-resume-refused
asserts re-keyed to live JSPI beacons; eeschema-load's failure message
no longer sends the developer to a deleted script; wait-beacons' dead
families/parser deleted; lane-0 legacy-glue guards removed (lane 0 is
unconstructible); the embind test.fail re-gated with the JSPI reason
(plain embind invokers cannot suspend — verified still failing);
lint-determinism now scans tests/jspi (166 files clean);
eeschema-collab local-move gated to chromium (~50% flaky on FF even
solo; pcbnew twin covers both engines).
Docs: DEBUG.md rewritten as the JSPI debugging guide; build.md
describes the single-phase build; docs/features/async/README.md
banner-marked historical and repointed at the NEW
23-jspi-runtime.md (current architecture: export census, turnstile,
libcontext ownership + refusal contract, embind call shapes, the
em-pthread service-wrapper trick, exception policy, known gaps).
Gates on the cleaned tree: test:e2e 725 passed / 0 failed (after the
quiescence-probe fix; the 3 other reds were verified contention flakes
solo-green or the documented FF gate), web 76/0, jspi 18/18 both
engines, vitest 295/295 + 17/17, all lints green, live-app census
clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
Live-app fix (Place Footprints / routing dead in Chrome): submodule
bumps carry the coroutine ownership fix (kicad 012d95ecb4) and the
handler-exception survival fix (wxwidgets 1b5f0e31f4).
Emscripten-6 fallout:
- occ/ngspice worker wrappers: mainScriptUrlOrBlob was removed
upstream; pthread children re-run the wrapper blob, so an em-pthread
realm now importScripts the glue and gets out of the way (before:
recursive service boots, pool never fills, silent 180s boot hangs —
every occ spec and ngspice bg_run).
- Makefile.wasm: -sASYNCIFY frankenlinks on the no-wx coroutine repro
targets ported to -sJSPI (the JSPI-only libcontext crashed at first
yield under them); mainloop/gl repro pages drive their tick through a
promising export (emscripten_set_main_loop callbacks cannot suspend);
retired inject-dyncall-shims lines removed (targets were unbuildable
since Phase 8); $stringToNewUTF8 force-included (the EM_ASM value
bridge aborted the runtime on the first decoded exception).
- fiber-park levers: neither embind shape can drive suspending levers
(plain throws on strict-JSPI Firefox; emscripten::async() re-executes
its invoker on settle) — kept sync for manual Chromium probing, spec
coverage moved to the jspi-coroutine harness (18 cases).
Suite work:
- Playwright 1.61.1 -> 1.62.1 (Firefox 153: JSPI on by default).
- fiber-resume-park.spec retired -> coroutine-lifecycle.spec: census
gate over boot / board load / chooser open / cancel (deterministically
red on the pre-fix build).
- Blind asyncify-era pins re-keyed: quasimodal-strand + wait-beacons
beacon regexes, footprint-chooser-close liveness -> wx parking-timer
heartbeat (scheduler counters idle flat on Firefox).
- occ/ngspice test providers: 60s boot timeout + worker error
surfacing (a worker death used to be a silent 180s timeout).
- Harness pages: stale 9.99 config dir -> 10.0 (library_manager wxCHECK
noise, chooser had no libraries).
- gal-webgl harness: missing artifacts rebuilt (boost/glm extracted to
the host sysroot), PgmOrNull stub added for the rebased GAL.
- jspi-scheduler: clean-shutdown console line restored (app-quit
contract), quarantine never yanks SP from a live window.
Gates: test:e2e 699 passed / 0 failed (wx-chromium, kicad-firefox,
kicad-chromium, jspi-firefox, coroutine-firefox); web ff/cr/mobile 71
passed; lint:ci-coverage 166, lint:determinism 163, screenshots
manifest 492 current, corpus 7/7, tools:contract green. Offline
screenshot baselines show expected mass drift from the engine bump —
re-baseline (screenshots:noise -> promote) is a follow-up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016X9eh1s5sTx1o9Em9KBuwR
Phase 8 in the parent repo. Deleted: asyncify-scheduler.js, apply-asyncify.sh,
apply-finalize.sh, inject-dyncall-shims.sh, asyncify-imports/removelist.txt,
the wasm-opt/finalize stub pair, scripts/binaryen-hoist-pass/ (the fork stays
a dormant submodule; removal is a follow-up), bench/wasm-opt-bench.sh (README
marked historical), wasm/shims/context_sleep.cpp, and the sched-context
harness app + Makefile targets.
PCBJAM_ASYNC_BACKEND is gone: build-wx-wasm.sh hardcodes the jspi stamp
(still force-cleans pre-migration trees), build-kicad-target.sh gives editors
the JSPI link surface and the CLIs nothing (they pin ASYNCIFY=0), the stub
dance is replaced by an unconditional .real-restore, build-wasm-test.sh lost
its whole post-link loop, docker/build.sh's postprocess is the ENV shim only,
and Makefile.wasm links every app JSPI with the scheduler shim as a tracked
prerequisite. pcbjam_async_policy.h keys on __EMSCRIPTEN__.
jspi-scheduler.js: wxWasmMainLoopPump dropped from the wrap census (the
export died with the D5 detach); inert [TRACE] instrumentation removed.
CI: wasm-build.yml rewritten for the single-cache pipeline (one output cache
keyed on compile inputs; post-processed bytes cached after the shim);
opt_level input removed from both callers. wasm-cache-hash.mjs inputs now
cover patch-env-shim.mjs + jspi-scheduler.js + jspi-exports.txt.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NDeBaKKhQztd8KiVtHuyXr
wasm/shims/context_sleep.cpp: a main-thread nanosleep whose frame stands on a
scheduler context that OWNS the stack arms a mailbox wake and yield_parks that
context instead of suspending the stack in place. It lives in the sleep
primitive rather than in tool_manager.cpp on purpose - KiCad and the wx core
stay untouched (CLAUDE.md's fork rule) and the whole K7 class moves at once,
not just TOOL_MANAGER::RunSynchronousAction's spin loop.
MEASURED AT D-ON, and it is NOT what unblocks Phase D. The four canvas-tool
specs still fail, but the trace now names a different cause: the fatal swap is
old=<libcontext ROOT> new=<tool coroutine> with mouseEventHandlerFunc above it
- a DOM mouse handler entering wasm DIRECTLY on the main stack, bypassing the
tick. So one coroutine is entered two ways: by the tick through the dispatch
context as a STAR TRANSFER, and by DOM handlers as a DIRECT SYMMETRIC SWAP. A
capture written by one path cannot be rewound by the other -> index out of
bounds in doRewind. That is section 7 rule 5 (partial migration is worse than
none) in its purest measured form, and it is why the harness stays green: its
coroutines are only ever entered from one place.
So the next increment is the DOM event entries (mouse/key/wheel/resize must
hand their events to the dispatch context as the tick does), not another park
site. It subsumes the one-root work too: with no dispatch on the main stack,
resolve_root_identity() always answers "the running context".
Landing state: STAR_DISPATCH=0, kicad 139 passed / 1 (pre-existing occ-probe)
= baseline, with the sleep shim in and inert.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBjomQfKyRa3jBdeAKpmTw
Phase B increment recorded in §10. The wx battery is GREEN at D-on (395/1,
the 1 pre-existing) with dispatch contexts, context waits and star transfers
all live - the first clean battery of the migration. Gaps 1 and 2 from the
D-on probe are closed (terminal coroutine finish; wake/refusal semantics),
and a third containment was found and added: an exception escaping a handler
propagates out through drain()'s fiber swap and would otherwise leave the
registry mid-transition, dead-pumping every later wait. Shim carries the new
abandon call; .ci-cache-epoch -> 12.
THE BOUNDARY: on the full KiCad suite D-on loses four canvas-tool specs
(draw-wires, draw-lines, move-with-m, presence-locks move) to `index out of
bounds` in doRewind - the blue screen itself. Real tool coroutines park IN
PLACE inside their bodies, and a star transfer over an already-parked stack
rewinds state the fiber layer cannot see; the harness's coroutines yield
cleanly, so it goes green while KiCad does not (the doc-19 lesson again:
the harness models the shape, not the parks). So D cannot carry KiCad until
the tool-body park sites are contexts too - C+E completion, which §5 already
ordered before the flip. This measurement makes that ordering non-negotiable.
Landing state verified: STAR_DISPATCH=0, kicad 139 passed / 1 (pre-existing
occ-probe glb) = the Phase A baseline exactly, wx battery 395/1.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBjomQfKyRa3jBdeAKpmTw
NOT GREEN. resolveWait marks a context-parked waiter ready and arms a pump
instead of resolving a promise nobody awaits.
The doc records the measured correction: DoRun parks the MAIN stack every
frame in wxWasmYieldToBrowser, which doc 21 called safe-by-construction only
because dispatch also ran there. With the scheduler swapping contexts from the
tick, those interleave over one currData - overlapped-wake, the exact class
this work exists to remove. So the main loop must become a context (D5) and
the bridges (E) join the same flip: D5+D+C+B+E land together.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EarUW9DS1c1sSW4ZNrkGQS
Gate results (single battery, scheduler-only): wx app battery +
asyncify + coroutine 363 passed / 3 skipped / 0 failed; full kicad
suite 138 passed / 30 skipped / 1 failed — the one failure is the
pre-existing local occ-probe glb case (predates D-1, unrelated).
Post-gate scrubs: vestigial 'startModal' removed from ASYNCIFY_IMPORTS
(tests/apps/Makefile.wasm) and env.startModal from
scripts/common/asyncify-imports.txt (the import no longer exists in any
wasm; both lists are boundary supersets so behavior is identical).
Stale comment pointers to the deleted legacy modal machinery updated.
Doc 20: D-1 work log added, status flipped to IN PROGRESS.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TEHGiiXMShNXbBr7gSJ7iz
Doc 20 D-1, second slice: the injector now injects asyncify-scheduler.js
unconditionally — the WX_SCHEDULER=0 legacy opt-out, the
SHIM_DISABLE_HANDLESLEEP ablation skip, and the
SHIM_DISABLE_TRAMPOLINE_HEAL ablation skip are gone, and
scripts/common/shims/handlesleep.js is deleted (the scheduler subsumed
its capture/restore, fiber guard, and trampoline-heal duties in S2).
Comment-only scrubs point the remaining references at the scheduler
shim. .ci-cache-epoch bumped (shim/injector behavior changed).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TEHGiiXMShNXbBr7gSJ7iz
Injector defaults to asyncify-scheduler.js (WX_SCHEDULER=0 = explicit
legacy opt-out); .ci-cache-epoch 9->10. Doc 17 S5 corrected: the
interlock/busy-gate deletions assumed handler-fibers that S1-S4 never
built — they stay as load-bearing second lines; each real deletion is
ledgered with its unlock condition. Flip gate: full kicad suite 136
passed on BOTH variants (occ-probe glb fails identically on both =
pre-existing; ngspice bg_run = rerun-passes flake).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
asyncify-scheduler.js REPLACES handlesleep.js on WX_SCHEDULER=1 builds
(injector either-or): ports capture/restore, fiber consume-once/
quarantine guard, wake-window flags, recorder, trampoline heal — and
adds deferred wakes (a wake mid-transition queues and drains from a
clean macrotask) plus the N1 currData accessor (pure-JS writes need
scheduler authorization; strict mode throws; meta-tested). Gates:
races 9/9 with NO legacy shim (subsumption), coroutine 39/39,
wx-chromium 30/30, kicad trio 3/3 on the C-lane build.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
Shim embind lane wraps the doc-18 production mutators at the Module
boundary (busy-window calls queue + deliver post-settle; time-boxed
unkillable pump). N2 un-fixme'd and green; collab-load-fuzz carries the
variant contract (drop on legacy, deliver-in-order on scheduler, capped
hammer on the scheduler lane); timer-park's timerRetry silence tripwire
arms on shim+export and is green on the C-lane kicad build. Bump
wxwidgets for the wheel lane. CI both-EH matrix deliberately deferred.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
Doc 17 step S0 scaffolding: WX_SCHEDULER=1 injector path with an
observation-only asyncify-scheduler.js skeleton (legacy shim stays
authoritative until S2), guard-beacon extraction with occurrence
recovery for rate-limited beacons, and the fixme'd N2 ordering spec
(add-then-move probe; un-fixme at S1).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TfxKn5utcntBSnxz4ZnYKs
The editor reported nothing when a session died. Evidence lived only in-tab —
an 800-line React array behind a "Show console" button — so diagnosis meant
asking a user to paste a screenshot.
Better Stack's Error Tracking ingests the Sentry wire protocol, so this runs
the stock @sentry/browser against a Better Stack DSN. Sentry.init installs its
own window error/unhandledrejection handlers, so uncaught main-thread errors
and the wasm traps that escape emscripten's DOM event handlers are captured
with no instrumentation at the throw sites. Not their JS tag: it has no
beforeSend or fingerprint hooks, its runtime spawns workers from cross-origin
CDN hosts (this page is COEP: require-corp), and it ships session replay on by
default — which on a CAD canvas records customers' board geometry.
@sentry/browser is imported in exactly one file so the vendor stays swappable,
mirroring how lib/analytics.ts isolates Plausible.
Also replaces the terminal-signature regex with a shared, unit-tested predicate
(wasm/terminal-error.ts) used by BOTH the fatal overlay and the reporter, so
they cannot disagree. The regex was a type check written as a string match and
had three live holes: `RuntimeError` was listed but never appears IN
`.message`; Chrome's bare "unreachable" and "null function" matched nothing
(the v0.1.20 prod log is exactly those); and narrowing "table index is out of
bounds" to `\bindex out of bounds` for Firefox in 197f317 silently stopped
matching Chrome's spelling. Checking the TYPE — every trap in this family is a
WebAssembly.RuntimeError — covers all engines and ends the spelling chase; the
message patterns remain as a fallback for paths that lose the Error object,
such as a worker ErrorEvent crossing the realm boundary with error: null.
197f317's pthread-worker tap, promote() and Firefox findings are kept as-is.
Notes:
- Off unless VITE_ERRORS_DSN is set AND VITE_ALLOW_USER_OVERRIDE !== "1" (dev
servers and every Playwright harness set the latter, and production builds
never do), so a production DSN in a local .env still cannot report. With no
DSN the whole SDK is const-folded out: 1,193,080 vs 1,282,463 bytes of JS.
- browserApiErrors integration removed. It wraps setTimeout/rAF/addEventListener
in try/catch, which is exactly how KiCad-on-Emscripten drives its main loop.
- Console breadcrumbs off (collab/debug.ts's clog fires per Yjs update and would
evict the ring before any crash); dom/fetch/navigation breadcrumbs kept.
- beforeSend redacts token/apiKey/Bearer — collab/provider.ts puts the collab
token in the y-partyserver URL, so a connection-failure string carries a live
credential — and guards the cascade: one wedge produced 8 errors in prod, and
after the first terminal event the rest are dropped into cascade_count.
Verified end to end against the real EU host from a cross-origin-isolated page:
POST /api/<id>/envelope/ -> 200, and 4 terminal throws produce 1 event
(control: 1 throw, same count).
Privacy policy 9, cookie policy 6 and the licenses page are updated: Better
Stack is disclosed as an EU processor, and the licenses page now describes the
browser app's own JS dependencies, which it never did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every repo moved from emergence-engineering/ to PCBJam/, but the published
source pointers still named the old org. GitHub's transfer redirect resolves
them (all six checked, 301 -> 200), so nothing is broken today — but it stops
working the moment anyone creates a repo at an old path, and a GPLv3
corresponding-source pointer is a poor thing to leave depending on a redirect.
CI never passes --repo, so the hardcoded default is what actually ships: the
editor's version badge on editor.pcbjam.com has been linking users to the old
org for their source.
Covers the source pointers (licenses.md, terms.md 12.4, REPO_URL and its doc
comment, the three build-script --repo defaults, the site footer's build-commit
link) and the two "our GitHub" org links. Bumps the pcbjam-shared pointer for
the same fix there.
Deliberately untouched: emergence-engineering.com, the company domain behind
contact@ and the EE credit block — the trailing slash in the substitution keeps
it out. And docs/security-audit-glm/, which describes a finding rather than
linking anywhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The prod differential ladder finished: staged byte VOLUME on a warm load is
the only trigger left (V1a siblings-without-lib-tables dies, V1b +120 files
survives, V1c sibling KiCad files renamed byte-for-byte dies, V1d Leonardo +
123MB of inert markdown dies on loads 3-4; 14MB never dies). 3D models,
collab/ydoc/presence, lib tables, sibling KiCad handling and file count are
all exonerated — volume only loads the dice on the underlying race.
That made the crash reproducible locally for the first time in six campaigns:
a persistent browser profile + a 110MB project fails every warm load with the
exact prod signature. Iteration is now ~12 minutes instead of a release cycle.
Shim: every fiber switch now records the departing side's remaining asyncify
buffer and its recorded rewind entry (rem=/rf=), which is what identified the
unrewindable capture and disproved buffer overflow. The deferral family is
closed for good — a microtask-deferred retry on a clean empty stack died
identically to the nested rewind, because the suspension is broken at write
time, not by nesting.
Shell: log the origin stack when wx reports the top window destroyed. That
notification fires from ~wxTopLevelWindowWasm for ANY top-level window, so a
transient frame dying mid-load navigates the user out of the editor — a real
bug in its own right, found while chasing the empty flight-recorder dumps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The 96-event recorder ring holds under a second of history at idle tick rate
(~110Hz), so settle-time collision pressure scrolls out before any poll can
read it — the prod dumps only caught the kill because the trap froze the
moment. Scroll-proof totals since boot: every finishContextSwitch increments
fcsTotal; every root entry inside a sleep-wake window increments rootHotTotal
(the fatal precondition). Both appear in the [wx-asyncify] STATE line, i.e.
in every trap auto-dump, every __wxAsyncifyDump() call, and every blue-screen
console — turning ANY prod load (crashing or clean) into a dose measurement
for the differential-repro experiment (which project ingredient generates
collision windows: siblings, 3D models, libs).
.ci-cache-epoch 7→8.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
v0.1.24 in prod, doubly convicted the same morning: the Leonardo open
crawled/hung (open:settled result=failed at the 60s escape, heap never past
256MB — every main-loop iteration runs INSIDE its yield-wake extent, so the
"root-owned wake" scope matched thousands of legitimate nested coroutine
Call/returns per open, each paying a deferred macrotask, throttled to ≥1s in
a background tab), AND the Nano crashed 22ms after deferrals=1 fired.
Harmful and insufficient: the fatal nested-rewind interleave and the benign
bulk are observationally identical at this layer — no discriminator exists.
Retired (second and final retraction, async/16 round 5). What stays shipped
and clean: consume-once root suspensions, the internally-parked quarantine +
laundering check, the flight recorder + beacons, the WSOD floor, the
pendingSleeps leak fix (confirmed by pendingSleeps=[] in the Nano dump). The
rare nested-rewind crash is ACCEPTED and fully observable until the
structural fix — the design-B fiber-first runtime (async/06,12,13), where
one scheduler owns every suspension and this interleave cannot exist.
.ci-cache-epoch 6→7.
Local: fiber 2/2 (one refusal beacon) + timer + firefox sweep 21 passed,
chromium scenarios 11 passed/4 quarantine-skips, web fatal+follow 2/2.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The v0.1.23 flight recorder caught the kill live (console-export-2026-8-1_19-16-8):
dozens of benign fiber round-trips at w=0, the yield cycling healthily on its
buffer — then "fcs … ROOT w=1" and the trap, state frozen at Rewinding with
currData=root+20. The fatal condition, observed rather than inferred: a fiber
round-trip inside the ROOT's OWN sleep-wake continuation re-suspends and
re-rewinds the root nested inside its live wake rewind. Consume-once passed
correctly — it guards a different corruption and stays.
The round-3 deferral was aimed right but unscoped (taxed fiber-owned wakes,
flaked S4). Final form: every fresh sleep is tagged root- or fiber-owned
(fiber ⇔ started inside a finishContextSwitch fiber slice or a fiber-owned
wake; root entries don't count as slices); finishContextSwitch(root) defers
one macrotask ONLY while a root-owned wake is live (Asyncify.__wakingRoot).
Beacon: root-entry-deferred. Verified inert where it must be: zero beacons
across all 13 drift-trio-scenarios logs (26/26 + 25/26-then-26/26 stress —
the single miss carried no beacons, i.e. the pre-existing under-load flake).
Also: resume re-entries no longer push sleep contexts (the v0.1.23 dump
carried ~380 leaked zero-linked entries), and wake events in the recorder are
tagged R/f for ownership.
.ci-cache-epoch 5→6.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The deferral (9ca2ac1) modeled the wrong condition and taxed every parked
fiber completion with a macrotask hop: under CI load that stretched
three-client apply chains and flaked drift-trio S4 twice consecutively
(26/26 green locally under stress) — retracted.
The actual fatal state, readable in all four prod stacks once seen: a SECOND
rewind of the same root suspension. Root suspends once per fiber_swap out of
it; two parked fibers completing against one root suspension epoch (a tool
fiber + a collab fiber both waking around open:settled) each drive
finishContextSwitch(root) — the second rewinds already-consumed data →
"unreachable executed" → poisoned runtime, with the wake-side "index out of
bounds" as the sibling symptom.
Cure: stop exempting root from the validity check the shim already keeps.
First consumption proceeds synchronously — zero added latency anywhere; the
second is refused ([wx-asyncify] "root suspension already consumed") — the
yielded fiber stays properly suspended and resumable, root continues via its
real pending resume, libcontext's ghost-epoch contract enforced one layer
lower. Root remains exempt only from the internally-parked quarantine (its
yield park is routine).
.ci-cache-epoch 4→5 (the epoch-4 cache holds the retracted deferral shim).
Local: fiber 2/2 + timer 1/1, firefox sweep 20 passed, drift-trio-scenarios
kicad-chromium 26/26 under 3-worker stress, web fatal+follow 2/2.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
v0.1.22 still trapped with BOTH guards silent: the fatal rewind's target is
the ROOT context, which layer 2 exempted. All four prod stacks are the same
collision — a fiber completes its yield-back to main while main's sleep-wake
rewind is still on the stack (maybeStopUnwind → trampoline →
finishContextSwitch → doRewind(root) → unreachable), two "resume main" paths
interleaved in one tick; the 8ms-earlier "index out of bounds" is the wake
side of the same event.
Root entry is legal and constant in healthy flow; only the wake-window
overlap is fatal. So: serialize, don't refuse. The shim marks the
synchronous wake window (Asyncify.__inSleepWake around wakeUp) and DEFERS a
root finishContextSwitch landing inside it by one macrotask
([wx-asyncify] root-entry-deferred beacon, trampoline retry) — an ordering
change only, nothing dropped. Suspension recording happens before the
deferral branch, so the yielding fiber's validity survives the wake chain
nulling currData.
Plus a flight recorder: a 96-entry ring of asyncify/fiber events (sleeps,
wakes, every context switch with ROOT/wake-depth, refusals, deferrals),
silent in normal operation, auto-dumped with full machine state next to the
first trap signature in the console; window.__wxAsyncifyDump() on demand.
The next prod export reads like a black box, not a stack-shape puzzle.
.ci-cache-epoch 3→4 (wasm cache key omits scripts/**).
Local: fiber-resume-park 2/2 (one refusal beacon), timer-park 1/1, sweep 20
passed, web fatal+follow 2/2.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
v0.1.21 still trapped with ZERO jump-refused beacons: the fatal swap PASSED
the C++ swap_suspended guard. Mechanism (async/16 round 2): a fresh JS entry
executing while g_current_context still points at a parked fiber gets
attributed to that fiber — fiber_swap writes a fresh, valid-LOOKING foreign
suspension into the parked fiber's struct and re-marks the flag. The flag
lies; the resume rewinds garbage.
This guard tracks truth at the emscripten-fiber layer (handlesleep.js wraps
Fibers.finishContextSwitch):
- valid suspensions = real swap-outs (currData == oldFiber+20 when the
trampoline runs), consumed on rewind;
- internally-parked = an entered slice that ended in a handleSleep park
(currData set, no nextFiber) — quarantined until a GENUINE swap-out,
where genuine means the fiber's pending sleep has resolved
(__pendingSleepContexts), so a laundering write cannot lift it;
- entering a quarantined or suspension-less fiber is REFUSED
([wx-asyncify] fiber-resume-refused, ghost contract).
The ROOT context is exempt from quarantine and refusal: its rewound
continuation runs the whole main loop, whose routine yield park says nothing
about a fiber body — the first build of this guard quarantined main off that
signal and starved every coroutine return (19 collab e2e reds, empty
results). Root = the old side of the first switch ever.
.ci-cache-epoch 2→3: the wasm output cache key omits scripts/**.
Red/green: fiber-resume-park.spec.ts scenario 2 (laundered resume → exactly
one refusal beacon, both coroutines complete); full fiber-heavy sweep green
(21 passed).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The shim has been silently restoring Asyncify.currData across overlapping
parks since it was written — so a prod console dump could never say whether
the #9153 family fired, mislinked, or was bypassed. Rate-limited [wx-asyncify]
reporting, calibrated against the timer-park e2e (2 rounds, 2026-07-31):
- concurrent-park: a FRESH park (state 0) starting while another chain's
currData is live. state-2 entries are NOT reported — every legal resume
re-enters handleSleep while Rewinding (~100/s measured on a healthy run).
- reentrant-state: handleSleep entered mid-unwind (state 1) — never observed;
if it ever fires it IS the bug.
- aliased-wake-live / overlapped-wake: the restore actually repairing —
dangerous (other chain still parked) vs benign (other chain done). The
e2e observed 8 live cross-restores in one run, all survived.
Console.log only, no printf plumbing needed; stacks name the parker
(__asyncjs__wxWasmYieldToBrowser vs _emscripten_sleep etc.).
.ci-cache-epoch 1→2: the wasm output cache key omits scripts/**.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019SE4o46Lnq3hF574FFq8x4
The v0.1.14.1 release gate died in "Build wxWidgets (wxUniversal WASM)" with
"No rule to make target 3rdparty/pcre/src/pcre2_chartables.c". Nothing in the
tree changed wx — the submodule is the same SHA that released fine as v0.1.13
— and the two main CI runs on this tree built wx and went on to run e2e. The
restored build-wasm/wxwidgets cache is the variable: pcre's makefile rm's that
path and re-links it to pcre2_chartables.c.dist at configure time, so a cache
captured around that window restores a tree whose pcre rule cannot be
satisfied from a clean checkout.
CI's wx cache key hashes scripts/build-wx-wasm.sh, so a header edit is the
lever that discards it. Documented as an explicit epoch counter there, since
the next person hitting this will not guess that editing a build script is how
you evict a cache.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H8jo7zz1ZwzYpjJ64UZKN4
Two consecutive publish-libs runs died on runner-side CF API flakiness (a 502
mid-put, then 'terminated' on the first probe). Gets and puts now retry with
backoff; a definitive missing-object error still returns null immediately.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011CC8aAnUUHcnHy3QCJtUwb
A CF API 502 on the manifest.json probe made publish-libs misdetect an
already-published tag as unpublished and start a full republish (byte-identical
immutable content, so harmless — but ~30 min of redundant uploads before a
second 502 killed it). Only wrangler's definitive missing-object error now
reads as absent; anything else throws.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011CC8aAnUUHcnHy3QCJtUwb
Cold loads on versioned CDN deploys now show a consent card (editor MB +
symbol/footprint lib figures, downloaded-now vs on-demand) and wait for OK
before any big fetch; warm loads skip it and show truthful stages (loading
from cache / Compiling / Starting KiCad) instead of the first-download line.
- wasm-assets: resolveWasmMeta (bundle/ver/sizes), download-completion marker
keyed by content-addressed bundle/ver, update wording, auto-download opt-out,
HEAD size fallback
- boot: manifest raw size as the progress total (fixes the br/gzip
Content-Length mismatch), marker written after download+instantiate succeed
- cdn-source: syncState() — IDB warmth peek + sizes.json cold sums
- synced-source: syncState() from the backend envelope's sync refs (private
platform); remote-source passes libSchema.sync through
- publish-wasm: manifest schema 2 with per-bundle sizes (registry-persisted,
reuse + snapshot modes); publish-libs: sizes.json sibling key + top-up mode
- fixed 4 stale unit tests (bundle mapping, session-identity email)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011CC8aAnUUHcnHy3QCJtUwb
brotli q11 over the ~320MB wasm set ran serially on one core (~0.4MB/s),
dominating the release publish job. Compress every to-be-uploaded file
concurrently on the libuv threadpool (compressBytesAsync + UV_THREADPOOL_SIZE
sized to the machine), so wall time drops from sum-of-files to roughly the
largest single file (kicad_editor.wasm): 329s for the full set locally vs
~11.5min of CPU. Upload ordering invariants unchanged: meta.json still last
per tool, registry last overall; moved-tag guard and reuse path untouched.
Also adds BROTLI_PARAM_SIZE_HINT and moves the publish-wasm job to
ubicloud-standard-8 so there is a core per file.
Verified byte-identical CDN layout vs the old script (local driver, pinned
builtAt), blob roundtrip to source sha, reuse + --from-registry modes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JQ9npuB6uLvkv6gzBV5GPh
Redirects from emergence-engineering still work, but fresh clones and CI
checkouts should reference the real home.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y32etYBCKV6t1qDoLoGmgF
