diff --git a/.github/workflows/wasm-build.yml b/.github/workflows/wasm-build.yml
index 8c7d00d..042fa33 100644
--- a/.github/workflows/wasm-build.yml
+++ b/.github/workflows/wasm-build.yml
@@ -27,7 +27,7 @@ on:
         type: string
         default: "-O1"
       build_3d_viewer:
-        description: "Build the WASM 3D viewer into pcbnew (ON/OFF)"
+        description: "Build the WASM 3D viewer into kicad_editor (ON/OFF)"
         type: string
         default: "ON"
       run_tests:
@@ -190,7 +190,7 @@ jobs:
           docker run --rm -v kicad-wasm-ci_kicad-build-cache:/bw -v "$PWD/deps-cache":/cache \
             alpine sh -c 'tar xzf /cache/deps.tar.gz -C /bw'
 
-      # PHASE 1 (base miss only): container compile of all 6 tools → output/ base
+      # PHASE 1 (base miss only): container compile of all 4 bundles → output/ base
       # wasm (opt-independent). 3D viewer per input. --compile-only skips the host
       # asyncify/-O tail. KICAD_PIPELINE has no effect here (no post-process to
       # overlap), but the deps short-circuit on a warm volume.
diff --git a/docker/build.sh b/docker/build.sh
index f3d7c31..4a61f35 100755
--- a/docker/build.sh
+++ b/docker/build.sh
@@ -6,12 +6,14 @@
 #   ./docker/build.sh <app>[,<app>...] [args...]
 #
 # Apps:
-#   pcbnew         PCB editor (also serves the footprint editor via --frame=fpedit)
-#   eeschema       schematic editor (also serves the symbol editor via --frame=symedit)
+#   kicad_editor   merged PCB + schematic editor image — serves all four editors
+#                  (PCB / Footprint / Schematic / Symbol) via runtime --frame
 #   calculator     PCB calculator
 #   pl_editor      drawing-sheet editor
 #   gerbview       Gerber viewer
 #   all            build all of the above
+#   pcbnew         standalone PCB engine (debug aid; not deployed — kicad_editor is)
+#   eeschema       standalone schematic engine (debug aid; not deployed)
 #
 # A comma-separated list builds just those apps in order (e.g.
 # "calculator,pl_editor" — used to exercise the multi-app pipeline cheaply).
@@ -65,7 +67,7 @@ trap 'kw_fail 130; exit 130' INT TERM
 
 cd "$(dirname "$0")/.."
 
-VALID_APPS="pcbnew | eeschema | calculator | pl_editor | gerbview | sym_convert | all"
+VALID_APPS="kicad_editor | pcbnew | eeschema | calculator | pl_editor | gerbview | sym_convert | all"
 
 usage() {
     echo "Usage: ./docker/build.sh <app>[,<app>...] [args...]" >&2
@@ -88,15 +90,17 @@ APP_NAME="$1"
 shift
 
 # Expand the app argument into APPS[]: "all", a single app, or a comma list.
-# pcbnew first in "all" — its 90-min host-side wasm-opt chain is the critical
-# path, so it must start as early as possible (especially with KICAD_PIPELINE=1).
+# kicad_editor first in "all" — the merged image is the largest bundle, so its
+# host-side wasm-opt chain is the critical path and must start as early as
+# possible (especially with KICAD_PIPELINE=1). pcbnew/eeschema stay buildable as
+# standalone debug aids but are not part of "all" (not deployed).
 if [[ "$APP_NAME" == "all" ]]; then
-    APPS=(pcbnew eeschema calculator pl_editor gerbview)
+    APPS=(kicad_editor calculator pl_editor gerbview)
 else
     IFS=',' read -r -a APPS <<< "$APP_NAME"
     for app in "${APPS[@]}"; do
         case "$app" in
-            pcbnew|eeschema|calculator|pl_editor|gerbview|sym_convert) ;;
+            kicad_editor|pcbnew|eeschema|calculator|pl_editor|gerbview|sym_convert) ;;
             *)
                 echo "Error: unknown app '$app' (expected: ${VALID_APPS})" >&2
                 usage
diff --git a/kicad b/kicad
index 7660513..f5df597 160000
--- a/kicad
+++ b/kicad
@@ -1 +1 @@
-Subproject commit 766051316ba7de2c4e4f08340dca08100c3e1565
+Subproject commit f5df5977e0977063da6f6b66cf69799f5c90159a
diff --git a/scripts/deploy/publish-wasm.mjs b/scripts/deploy/publish-wasm.mjs
index 9d82f52..202024f 100644
--- a/scripts/deploy/publish-wasm.mjs
+++ b/scripts/deploy/publish-wasm.mjs
@@ -29,14 +29,13 @@ import {
 
 // --- tools & per-file rules ---------------------------------------------------
 
-// Bundles served to the browser editor. symbol_editor / footprint_editor are NOT
-// separate bundles: they are the eeschema / pcbnew bundle booted with a runtime
-// --frame flag (editor-unification), so they publish nothing of their own. The
-// frontend maps them onto their parent bundle via TOOL_BUNDLE. sym_convert is a
-// node CLI, not served.
+// Bundles served to the browser editor. The four editor tools (pcbnew, eeschema,
+// footprint_editor, symbol_editor) are ALL served by the ONE merged kicad_editor
+// bundle, booted with a runtime --frame flag (editor-unification Part 2) — none of
+// them publishes anything of its own. The frontend maps tools onto bundles via
+// TOOL_BUNDLE. sym_convert is a node CLI, not served.
 const TOOLS = [
-  "pcbnew",
-  "eeschema",
+  "kicad_editor",
   "pl_editor",
   "gerbview",
   "calculator",
diff --git a/scripts/kicad/audit-merged-symbols.sh b/scripts/kicad/audit-merged-symbols.sh
new file mode 100755
index 0000000..2776ee1
--- /dev/null
+++ b/scripts/kicad/audit-merged-symbols.sh
@@ -0,0 +1,98 @@
+#!/bin/bash
+# Duplicate-symbol audit for the merged kicad_editor image (editor-unification Part 2).
+#
+# The pcbnew and eeschema kifaces are statically linked into one WASM image with
+# --allow-multiple-definition (required for wx/KiCad dupes), so a symbol both engines
+# define binds SILENTLY to the first definition — a wrong-behavior/memory-corruption
+# bug, never a link error. This script intersects the two kifaces' defined symbols so
+# every collision is a conscious decision (the known set is renamed per-engine via
+# KICAD_WASM_PCB_SIDE_RENAMES in kicad/CMakeLists.txt).
+#
+# Run INSIDE the build container (needs $EMSDK llvm-nm and the per-app build trees):
+#   docker compose -f docker/docker-compose.yml exec kicad-wasm-builder \
+#       /workspace/scripts/kicad/audit-merged-symbols.sh
+# Re-run whenever the kicad submodule is bumped. Expected output: EMPTY intersection
+# (all known collisions renamed). Any line of output is a new upstream collision to
+# add to the rename list.
+#
+# Method (see docs/features/editor-unification/06-part2-implementation.md):
+#  - strong (T/D/B/R) defined external symbols: direct first-def-wins collisions.
+#  - weak (W/V) symbols are only dangerous when the SAME name has DIFFERENT
+#    definitions per module (same-named classes with inline members). Weak symbols
+#    also defined by the shared libs are one shared definition — filtered out. The
+#    remainder is mostly benign template dedup (magic_enum etc.); review NEW entries.
+
+set -euo pipefail
+
+BUILD_ROOT="${BUILD_ROOT:-/workspace/build-wasm}"
+P="${BUILD_ROOT}/kicad-pcbnew"
+E="${BUILD_ROOT}/kicad-eeschema"
+NM="${EMSDK:?EMSDK not set}/upstream/bin/llvm-nm"
+OUT="${TMPDIR:-/tmp}/merged-symbol-audit"
+mkdir -p "${OUT}"
+
+if [ ! -d "${P}/pcbnew" ] || [ ! -d "${E}/eeschema" ]; then
+    echo "ERROR: need built kicad-pcbnew and kicad-eeschema trees under ${BUILD_ROOT}" >&2
+    echo "       (./docker/build.sh pcbnew,eeschema --compile-only)" >&2
+    exit 1
+fi
+
+pcb_files() {
+    find "${P}/pcbnew/CMakeFiles/pcbnew_kiface_objects.dir" -name '*.o'
+    ls "${P}/common/libpcbcommon.a" \
+       "${P}/pcbnew/connectivity/libconnectivity.a" \
+       "${P}/pcbnew/router/libpnsrouter.a" \
+       "${P}/pcbnew/navlib/libpcbnew_navlib.a" \
+       "${P}/utils/idftools/libidf3.a" \
+       "${P}"/pcbnew/pcb_io/*/*.a 2>/dev/null || true
+    find "${P}/3d-viewer" -name '*.o' 2>/dev/null || true
+}
+
+sch_files() {
+    find "${E}/eeschema/CMakeFiles/eeschema_kiface_objects.dir" -name '*.o'
+    ls "${E}/eeschema/navlib/libeeschema_navlib.a" 2>/dev/null || true
+}
+
+# Weak symbols defined by the SHARED libs (one definition linked once — safe dedup).
+shared_syms() {
+    ${NM} --defined-only --extern-only --format=posix \
+        "${P}/common/libcommon.a" "${P}/common/libkicommon.a" \
+        "${P}/common/gal/libkigal.a" "${P}/libs/core/libcore.a" \
+        "${P}/libs/kimath/libkimath.a" "${P}/libs/kiplatform/libkiplatform.a" \
+        "${P}/scripting/libscripting.a" "${P}/api/libkiapi.a" \
+        "${P}/libs/sexpr/libsexpr.a" 2>/dev/null | awk '{print $1}' | sort -u
+}
+
+echo "== collecting symbols (llvm-nm)..." >&2
+${NM} --defined-only --extern-only --format=posix $(pcb_files) 2>/dev/null \
+    | awk '$2 ~ /^[TDBR]$/ {print $1}' | sort -u > "${OUT}/pcb_strong.txt"
+${NM} --defined-only --extern-only --format=posix $(sch_files) 2>/dev/null \
+    | awk '$2 ~ /^[TDBR]$/ {print $1}' | sort -u > "${OUT}/sch_strong.txt"
+${NM} --defined-only --extern-only --format=posix $(pcb_files) 2>/dev/null \
+    | awk '$2 ~ /^[WVwv]$/ {print $1}' | sort -u > "${OUT}/pcb_weak.txt"
+${NM} --defined-only --extern-only --format=posix $(sch_files) 2>/dev/null \
+    | awk '$2 ~ /^[WVwv]$/ {print $1}' | sort -u > "${OUT}/sch_weak.txt"
+shared_syms > "${OUT}/shared.txt"
+
+# Known-renamed / expected entries. In OPTION-OFF per-app trees (the normal state of
+# kicad-pcbnew / kicad-eeschema) the renames are NOT applied, so the known set shows
+# up here — filter it; the merged tree compiles with the renames so these cannot
+# collide there. KIFACE_1/Kiface get per-engine getter/accessor names; the class/data
+# names are prefixed PCB_/pcb (KICAD_WASM_PCB_SIDE_RENAMES).
+KNOWN='^(KIFACE_1$|_Z6Kifacev$|_Z16checkOverwriteDb|pcbAllowedActions$|allowedActions$|g_excludedLayers$|_Z[A-Z0-9]*[0-9]+(PCB_)?(DIALOG_TEXT_PROPERTIES|DIALOG_SHAPE_PROPERTIES|DIALOG_TABLE_PROPERTIES|DIALOG_TABLECELL_PROPERTIES|DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS|PANEL_SETUP_FORMATTING|TEXT_SEARCH_HANDLER|GROUP_SEARCH_HANDLER|TEXTBOX_POINT_EDIT_BEHAVIOR|RECTANGLE_POINT_EDIT_BEHAVIOR|FILEDLG_HOOK_SAVE_PROJECT|FOOTPRINT_INFO_GENERATOR))'
+# Mangled-name filter needs the raw class tokens too (ZTV/ZTI/ZTS/ZN prefixes).
+CLASSES='DIALOG_TEXT_PROPERTIES|DIALOG_SHAPE_PROPERTIES|DIALOG_TABLE_PROPERTIES|DIALOG_TABLECELL_PROPERTIES|DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS|PANEL_SETUP_FORMATTING|TEXT_SEARCH_HANDLER|GROUP_SEARCH_HANDLER|TEXTBOX_POINT_EDIT_BEHAVIOR|RECTANGLE_POINT_EDIT_BEHAVIOR|FILEDLG_HOOK_SAVE_PROJECT|FOOTPRINT_INFO_GENERATOR|checkOverwriteDb|allowedActions|g_excludedLayers'
+
+echo "== STRONG duplicates (unexpected — must be renamed or justified):"
+comm -12 "${OUT}/pcb_strong.txt" "${OUT}/sch_strong.txt" \
+    | grep -vE "${CLASSES}" | grep -vE '^KIFACE_1$|^_Z6Kifacev$' || true
+
+echo "== WEAK duplicates not from shared libs, mentioning NEW class tokens"
+echo "   (known colliding classes filtered; review anything printed):"
+comm -12 "${OUT}/pcb_weak.txt" "${OUT}/sch_weak.txt" \
+    | comm -23 - "${OUT}/shared.txt" \
+    | grep -vE "${CLASSES}" \
+    | grep -E '_Z(TV|TI|TS|N)[0-9]+[A-Z]' \
+    | grep -vE 'magic_enum|wxEventFunctorMethod|wxNavigationEnabled|wxSimplebook|wxDataView|wxMenuBar|wxVector|KIFACE|COLLECTOR|RC_JSON|PARAM_SCALED|EDA_|BOX2|WX_MENUBAR|SEARCH_HANDLER' || true
+
+echo "== audit done (details in ${OUT})"
diff --git a/scripts/kicad/build-kicad-target.sh b/scripts/kicad/build-kicad-target.sh
index 24ca569..e434521 100755
--- a/scripts/kicad/build-kicad-target.sh
+++ b/scripts/kicad/build-kicad-target.sh
@@ -31,7 +31,7 @@
 set -e
 
 if [ -z "$1" ]; then
-    echo "Error: missing <app> argument (pcbnew | eeschema | calculator | pl_editor | gerbview)" >&2
+    echo "Error: missing <app> argument (kicad_editor | pcbnew | eeschema | calculator | pl_editor | gerbview)" >&2
     exit 1
 fi
 APP_NAME="$1"
@@ -45,6 +45,15 @@ shift
 # The footprint/symbol editors have no target of their own — the pcbnew/eeschema
 # bundle opens them at runtime via single_top.cpp's --frame flag.
 case "$APP_NAME" in
+    kicad_editor)
+        # Merged pcbnew+eeschema image (editor-unification Part 2): one executable
+        # linking BOTH kifaces, frame chosen at runtime by --frame (pcb/fpedit/sch/
+        # symedit). Target lives in wasm/editor/ (added by the fork's top-level
+        # CMakeLists under -DKICAD_WASM_MERGED_EDITOR=ON); its binary dir doubles as
+        # the artifact subdir.
+        KICAD_TARGET="kicad_editor"
+        KICAD_SUBDIR="kicad_editor"
+        ;;
     pcbnew|eeschema|gerbview)
         KICAD_TARGET="$APP_NAME"
         KICAD_SUBDIR="$APP_NAME"
@@ -65,7 +74,7 @@ case "$APP_NAME" in
         KICAD_SUBDIR="eeschema"
         ;;
     *)
-        echo "Error: unknown app '$APP_NAME' (expected: pcbnew | eeschema | calculator | pl_editor | gerbview | sym_convert)" >&2
+        echo "Error: unknown app '$APP_NAME' (expected: kicad_editor | pcbnew | eeschema | calculator | pl_editor | gerbview | sym_convert)" >&2
         exit 1
         ;;
 esac
@@ -80,9 +89,12 @@ esac
 
 # Which app's WASM stub libraries (scripting/frame placeholders) to link.
 # sym_convert links the eeschema kiface objects, so it needs eeschema's frame
-# stub (eeschema_frame_stub.cpp).
+# stub (eeschema_frame_stub.cpp). kicad_editor links pcbnew's kiface objects, which
+# reference the action-plugin scripting placeholders (pcbnewGet*); eeschema's frame
+# stub arrives via CMake (target_sources on eeschema_kiface_objects), not this path.
 case "$APP_NAME" in
     sym_convert)      STUB_APP="eeschema" ;;
+    kicad_editor)     STUB_APP="pcbnew" ;;
     *)                STUB_APP="$APP_NAME" ;;
 esac
 
@@ -370,7 +382,15 @@ log_info "KiCad WASM support verified"
 # linker line below references "${STUBS_BUILD}/${APP_NAME}_embind.o" so we
 # create an empty placeholder when the source is missing, to keep the link
 # line stable across apps.
-EMBIND_OBJ="${STUBS_BUILD}/${EMBIND_APP}_embind.o"
+# kicad_editor (merged image) links THREE embind objects: both per-editor TUs
+# (compiled with -DKICAD_MERGED_EMBIND, which compiles out their duplicate
+# definitions and shared-name registrations) plus the dispatcher TU that registers
+# the shared JS names once — see wasm/bindings/kicad_editor_embind.cpp.
+if [ "${APP_NAME}" = "kicad_editor" ]; then
+    EMBIND_OBJ="${STUBS_BUILD}/pcbnew_embind.o ${STUBS_BUILD}/eeschema_embind.o ${STUBS_BUILD}/kicad_editor_embind.o"
+else
+    EMBIND_OBJ="${STUBS_BUILD}/${EMBIND_APP}_embind.o"
+fi
 EMBIND_SRC="${PROJECT_ROOT}/wasm/bindings/${EMBIND_APP}_embind.cpp"
 
 # Step 7: Configure KiCad with CMake
@@ -392,6 +412,15 @@ if [ "${APP_NAME}" = "sym_convert" ]; then
     SYM_CONVERTER_CMAKE_FLAG="-DKICAD_SYM_CONVERTER_WASM=ON"
 fi
 
+# Merged pcbnew+eeschema editor: gates the wasm/editor/ subdir, the per-engine
+# Kiface()/KIFACE_GETTER renames, and the PCB-side ODR symbol renames in the fork's
+# CMake (see KICAD_WASM_MERGED_EDITOR in kicad/CMakeLists.txt). Only this tree
+# (build-wasm/kicad-kicad_editor) configures with it ON.
+MERGED_EDITOR_CMAKE_FLAG=""
+if [ "${APP_NAME}" = "kicad_editor" ]; then
+    MERGED_EDITOR_CMAKE_FLAG="-DKICAD_WASM_MERGED_EDITOR=ON"
+fi
+
 # 3D viewer: built by DEFAULT (BUILD_3D_VIEWER=ON). Opt out with BUILD_3D_VIEWER=OFF, which links the
 # 3D stubs instead. The 3D viewer renders with the GL-free CPU raytracer (RENDER_3D_RAYTRACE_RAM)
 # blitted to the canvas through a plain WebGL2 textured quad — no -sLEGACY_GL_EMULATION. KiCad's
@@ -442,6 +471,7 @@ fi
 emcmake cmake "${KICAD_DIR}" \
     ${CCACHE_OPTS} \
     ${SYM_CONVERTER_CMAKE_FLAG} \
+    ${MERGED_EDITOR_CMAKE_FLAG} \
     -DCMAKE_BUILD_TYPE=${BUILD_TYPE} \
     -DCMAKE_INSTALL_PREFIX="${SYSROOT}" \
     -DCMAKE_MODULE_PATH="${WASM_LAYER}/cmake" \
@@ -495,7 +525,51 @@ emcmake cmake "${KICAD_DIR}" \
 # Exposes KiCad objects to JavaScript for future Pyodide integration.
 # When no app-specific source exists, build an empty object so the linker line
 # referencing ${APP_NAME}_embind.o doesn't break.
-if [ -f "${EMBIND_SRC}" ]; then
+
+# Compile one embind TU with the same includes and ABI-critical flags KiCad uses
+# (KICAD_TU_ABI_FLAGS must match the core's -DDEBUG state or vtable dispatch skews —
+# task #54). Args: <src> <obj> <app-include-subdir> [extra-defines]
+compile_embind_tu() {
+    local _src="$1" _obj="$2" _subdir="$3" _defines="${4:-}"
+
+    local _includes="-I${KICAD_BUILD} -I${KICAD_DIR}/include -I${KICAD_DIR}/${_subdir} -I${KICAD_DIR}/common"
+    # Generated DSN-lexer headers (e.g. pcb_lexer.h, used transitively via kicad_clipboard.h →
+    # pcb_io_kicad_sexpr_parser.h) are emitted into the common build subdir by make_lexer.
+    _includes+=" -I${KICAD_BUILD}/common"
+    _includes+=" -I${KICAD_DIR}/libs/core/include -I${KICAD_DIR}/libs/kimath/include -I${KICAD_DIR}/libs/kiplatform/include"
+    _includes+=" -I${KICAD_DIR}/thirdparty/clipper2/Clipper2Lib/include"
+    _includes+=" -I${KICAD_DIR}/thirdparty/nlohmann_json"
+    _includes+=" -I${KICAD_DIR}/thirdparty/expected/include"
+    _includes+=" -I${KICAD_DIR}/thirdparty/rtree"
+    _includes+=" -I${KICAD_DIR}/thirdparty/fmt"
+    _includes+=" -I${KICAD_DIR}/thirdparty/dynamic_bitset"
+    _includes+=" -I${KICAD_DIR}/thirdparty/nanodbc"
+    _includes+=" -I${KICAD_DIR}/thirdparty/picosha2"
+    _includes+=" -I${KICAD_DIR}/thirdparty"
+    # libcontext.h lives one level deeper; tool/coroutine.h does #include <libcontext.h>
+    _includes+=" -I${KICAD_DIR}/thirdparty/libcontext"
+    _includes+=" -I${SYSROOT}/include"
+
+    # KiCad requires C++20 for concepts
+    em++ -std=c++20 -c ${EXTRA_FLAGS} ${KICAD_TU_ABI_FLAGS} ${WX_CXXFLAGS} ${_defines} ${_includes} "${_src}" -o "${_obj}"
+}
+
+if [ "${APP_NAME}" = "kicad_editor" ]; then
+    # Merged image: both per-editor TUs (with -DKICAD_MERGED_EMBIND compiling out
+    # their duplicate definitions / shared-name registrations) + the dispatcher TU
+    # registering the shared JS names once (wasm/bindings/kicad_editor_embind.cpp).
+    # pcbnew's TU needs the generated lexer headers — pre-build pcbcommon (no wasted
+    # work: kicad_editor depends on pcbcommon anyway; incremental no-op).
+    log_info "Pre-building pcbcommon so generated lexer headers exist for the embind compile..."
+    emmake make -j${JOBS} pcbcommon
+    log_info "Compiling merged Embind bindings (pcbnew + eeschema + dispatcher)..."
+    compile_embind_tu "${PROJECT_ROOT}/wasm/bindings/pcbnew_embind.cpp" \
+                      "${STUBS_BUILD}/pcbnew_embind.o" pcbnew "-DKICAD_MERGED_EMBIND"
+    compile_embind_tu "${PROJECT_ROOT}/wasm/bindings/eeschema_embind.cpp" \
+                      "${STUBS_BUILD}/eeschema_embind.o" eeschema "-DKICAD_MERGED_EMBIND"
+    compile_embind_tu "${PROJECT_ROOT}/wasm/bindings/kicad_editor_embind.cpp" \
+                      "${STUBS_BUILD}/kicad_editor_embind.o" common
+elif [ -f "${EMBIND_SRC}" ]; then
     # pcbnew's embind TU transitively includes generated lexer headers
     # (kicad_clipboard.h → pcb_io_kicad_sexpr_parser.h → pcb_lexer.h, emitted into
     # ${KICAD_BUILD}/common by make_lexer custom commands on the pcbcommon target).
@@ -508,26 +582,7 @@ if [ -f "${EMBIND_SRC}" ]; then
         emmake make -j${JOBS} pcbcommon
     fi
     log_info "Compiling Embind bindings (${APP_NAME})..."
-    # Use the same includes and flags that KiCad uses
-    KICAD_INCLUDES="-I${KICAD_BUILD} -I${KICAD_DIR}/include -I${KICAD_DIR}/${KICAD_SUBDIR} -I${KICAD_DIR}/common"
-    # Generated DSN-lexer headers (e.g. pcb_lexer.h, used transitively via kicad_clipboard.h →
-    # pcb_io_kicad_sexpr_parser.h) are emitted into the common build subdir by make_lexer.
-    KICAD_INCLUDES+=" -I${KICAD_BUILD}/common"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/libs/core/include -I${KICAD_DIR}/libs/kimath/include -I${KICAD_DIR}/libs/kiplatform/include"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/clipper2/Clipper2Lib/include"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/nlohmann_json"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/expected/include"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/rtree"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/fmt"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/dynamic_bitset"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/nanodbc"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/picosha2"
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty"
-    # libcontext.h lives one level deeper; tool/coroutine.h does #include <libcontext.h>
-    KICAD_INCLUDES+=" -I${KICAD_DIR}/thirdparty/libcontext"
-    KICAD_INCLUDES+=" -I${SYSROOT}/include"
-    # KiCad requires C++20 for concepts
-    em++ -std=c++20 -c ${EXTRA_FLAGS} ${KICAD_TU_ABI_FLAGS} ${WX_CXXFLAGS} ${KICAD_INCLUDES} "${EMBIND_SRC}" -o "${EMBIND_OBJ}"
+    compile_embind_tu "${EMBIND_SRC}" "${EMBIND_OBJ}" "${KICAD_SUBDIR}"
 else
     log_info "No embind source for ${APP_NAME} (expected at ${EMBIND_SRC}); using empty placeholder"
     EMPTY_C="${STUBS_BUILD}/${APP_NAME}_embind_empty.c"
@@ -545,10 +600,14 @@ log_info "Building ${APP_NAME} (CMake target: ${KICAD_TARGET})..."
 # whenever the freshly-compiled embind object is newer than the linked output.
 LINK_OUT_JS="${KICAD_BUILD}/${KICAD_SUBDIR}/${APP_NAME}.js"
 LINK_OUT_WASM="${KICAD_BUILD}/${KICAD_SUBDIR}/${APP_NAME}.wasm"
-if [ -f "${EMBIND_OBJ}" ] && [ -f "${LINK_OUT_JS}" ] && [ "${EMBIND_OBJ}" -nt "${LINK_OUT_JS}" ]; then
-    log_info "Embind object newer than ${APP_NAME}.js — forcing relink to pick up new bindings"
-    rm -f "${LINK_OUT_JS}" "${LINK_OUT_WASM}"
-fi
+# EMBIND_OBJ may hold several objects (kicad_editor) — check each.
+for _embind_obj in ${EMBIND_OBJ}; do
+    if [ -f "${_embind_obj}" ] && [ -f "${LINK_OUT_JS}" ] && [ "${_embind_obj}" -nt "${LINK_OUT_JS}" ]; then
+        log_info "Embind object newer than ${APP_NAME}.js — forcing relink to pick up new bindings"
+        rm -f "${LINK_OUT_JS}" "${LINK_OUT_WASM}"
+        break
+    fi
+done
 
 emmake make -j${JOBS} "${KICAD_TARGET}"
 
diff --git a/scripts/kicad/build-kicad_editor.sh b/scripts/kicad/build-kicad_editor.sh
new file mode 100755
index 0000000..c2701f5
--- /dev/null
+++ b/scripts/kicad/build-kicad_editor.sh
@@ -0,0 +1,9 @@
+#!/bin/bash
+# Build the merged KiCad editor (pcbnew + eeschema kifaces in ONE image) for
+# WebAssembly. The editor frame (PCB / Footprint / Schematic / Symbol) is chosen
+# at runtime via single_top.cpp's --frame flag (editor-unification Part 2).
+# Thin wrapper around build-kicad-target.sh — see that script for options.
+
+set -e
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+exec "${SCRIPT_DIR}/build-kicad-target.sh" kicad_editor "$@"
diff --git a/tests/apps/kicad/eeschema.html b/tests/apps/kicad/eeschema.html
index 63dd005..3374022 100644
--- a/tests/apps/kicad/eeschema.html
+++ b/tests/apps/kicad/eeschema.html
@@ -154,6 +154,11 @@
     var Module = {
       thisProgram: '/usr/bin/eeschema',  // Fake absolute path for argv[0] (KiCad DEBUG check)
 
+      // The schematic editor is served by the merged kicad_editor bundle (editor-
+      // unification Part 2): load kicad_editor.js below and select FRAME_SCH at
+      // runtime.
+      arguments: ['--frame=sch'],
+
       preRun: [createCanvas, writeResources, seedKicadConfig],
       postRun: [],
 
@@ -209,6 +214,7 @@
   <!-- wxWidgets WASM glue code (defines getConfigEntryLength, etc.) -->
   <script src="wx.js"></script>
   <script src="wx-dom.js"></script>
-  <script async src="eeschema.js"></script>
+  <!-- Schematic editor = merged kicad_editor bundle + --frame=sch (editor-unification Part 2). -->
+  <script async src="kicad_editor.js"></script>
 </body>
 </html>
diff --git a/tests/apps/kicad/footprint_editor.html b/tests/apps/kicad/footprint_editor.html
index a0e173f..4639898 100644
--- a/tests/apps/kicad/footprint_editor.html
+++ b/tests/apps/kicad/footprint_editor.html
@@ -108,8 +108,9 @@
     var Module = {
       thisProgram: '/usr/bin/footprint_editor',  // argv[0] for KiCad's DEBUG check
 
-      // The footprint editor is served by the pcbnew bundle (editor-unification):
-      // load pcbnew.js below and select FRAME_FOOTPRINT_EDITOR at runtime.
+      // The footprint editor is served by the merged kicad_editor bundle (editor-
+      // unification Part 2): load kicad_editor.js below and select
+      // FRAME_FOOTPRINT_EDITOR at runtime.
       arguments: ['--frame=fpedit'],
 
       preRun: [createCanvas, writeResources, seedKicadConfig],
@@ -147,7 +148,7 @@
   <!-- wxWidgets WASM glue code (defines getConfigEntryLength, etc.) -->
   <script src="wx.js"></script>
   <script src="wx-dom.js"></script>
-  <!-- Footprint editor = pcbnew bundle + --frame=fpedit (editor-unification). -->
-  <script async src="pcbnew.js"></script>
+  <!-- Footprint editor = merged kicad_editor bundle + --frame=fpedit (editor-unification Part 2). -->
+  <script async src="kicad_editor.js"></script>
 </body>
 </html>
diff --git a/tests/apps/kicad/pcbnew-collab.html b/tests/apps/kicad/pcbnew-collab.html
index 8bec39c..74d4311 100644
--- a/tests/apps/kicad/pcbnew-collab.html
+++ b/tests/apps/kicad/pcbnew-collab.html
@@ -158,6 +158,11 @@
     var Module = {
       thisProgram: '/usr/bin/pcbnew',  // Fake absolute path for argv[0] (KiCad DEBUG check)
 
+      // The PCB editor is served by the merged kicad_editor bundle (editor-
+      // unification Part 2): load kicad_editor.js below and select
+      // FRAME_PCB_EDITOR at runtime.
+      arguments: ['--frame=pcb'],
+
       preRun: [createCanvas, writeResources, seedKicadConfig],
       postRun: [],
 
@@ -213,6 +218,7 @@
   <!-- wxWidgets WASM glue code (defines getConfigEntryLength, etc.) -->
   <script src="wx.js"></script>
   <script src="wx-dom.js"></script>
-  <script async src="pcbnew.js"></script>
+  <!-- PCB editor = merged kicad_editor bundle + --frame=pcb (editor-unification Part 2). -->
+  <script async src="kicad_editor.js"></script>
 </body>
 </html>
diff --git a/tests/apps/kicad/pcbnew.html b/tests/apps/kicad/pcbnew.html
index 01d5e2b..d7edbc1 100644
--- a/tests/apps/kicad/pcbnew.html
+++ b/tests/apps/kicad/pcbnew.html
@@ -123,6 +123,11 @@
     var Module = {
       thisProgram: '/usr/bin/pcbnew',  // Fake absolute path for argv[0] (KiCad DEBUG check)
 
+      // The PCB editor is served by the merged kicad_editor bundle (editor-
+      // unification Part 2): load kicad_editor.js below and select
+      // FRAME_PCB_EDITOR at runtime.
+      arguments: ['--frame=pcb'],
+
       preRun: [createCanvas, writeResources],
       postRun: [],
 
@@ -178,6 +183,7 @@
   <!-- wxWidgets WASM glue code (defines getConfigEntryLength, etc.) -->
   <script src="wx.js"></script>
   <script src="wx-dom.js"></script>
-  <script async src="pcbnew.js"></script>
+  <!-- PCB editor = merged kicad_editor bundle + --frame=pcb (editor-unification Part 2). -->
+  <script async src="kicad_editor.js"></script>
 </body>
 </html>
diff --git a/tests/apps/kicad/symbol_editor.html b/tests/apps/kicad/symbol_editor.html
index 7bc25e0..63af5f3 100644
--- a/tests/apps/kicad/symbol_editor.html
+++ b/tests/apps/kicad/symbol_editor.html
@@ -147,8 +147,9 @@
     var Module = {
       thisProgram: '/usr/bin/symbol_editor',  // Fake absolute path for argv[0] (KiCad DEBUG check)
 
-      // The symbol editor is served by the eeschema bundle (editor-unification):
-      // load eeschema.js below and select FRAME_SCH_SYMBOL_EDITOR at runtime.
+      // The symbol editor is served by the merged kicad_editor bundle (editor-
+      // unification Part 2): load kicad_editor.js below and select
+      // FRAME_SCH_SYMBOL_EDITOR at runtime.
       arguments: ['--frame=symedit'],
 
       preRun: [createCanvas, writeResources, seedKicadConfig],
@@ -206,7 +207,7 @@
   <!-- wxWidgets WASM glue code (defines getConfigEntryLength, etc.) -->
   <script src="wx.js"></script>
   <script src="wx-dom.js"></script>
-  <!-- Symbol editor = eeschema bundle + --frame=symedit (editor-unification). -->
-  <script async src="eeschema.js"></script>
+  <!-- Symbol editor = merged kicad_editor bundle + --frame=symedit (editor-unification Part 2). -->
+  <script async src="kicad_editor.js"></script>
 </body>
 </html>
diff --git a/tests/kicad/frame-runtime.spec.ts b/tests/kicad/frame-runtime.spec.ts
index c71e55b..3c0d68c 100644
--- a/tests/kicad/frame-runtime.spec.ts
+++ b/tests/kicad/frame-runtime.spec.ts
@@ -3,34 +3,47 @@ import { test, expect } from '@playwright/test';
 /**
  * Editor-unification runtime-frame validation.
  *
- * After unification the library editors are no longer separate .wasm bundles:
- *   - the Symbol Editor   is the eeschema bundle booted with --frame=symedit
- *   - the Footprint Editor is the pcbnew  bundle booted with --frame=fpedit
- * The frame token is threaded through Module.arguments and parsed in
- * kicad/common/single_top.cpp (mirroring kicad/kicad.cpp's --frame parser).
+ * Since Part 2 ALL FOUR editors are served by the ONE merged kicad_editor bundle
+ * (pcbnew + eeschema kifaces statically linked): each harness loads kicad_editor.js
+ * with its frame token in Module.arguments —
+ *   - PCB Editor       --frame=pcb      (also the bundle's build-time default)
+ *   - Footprint Editor --frame=fpedit
+ *   - Schematic Editor --frame=sch
+ *   - Symbol Editor    --frame=symedit
+ * parsed in kicad/common/single_top.cpp (mirroring kicad/kicad.cpp's --frame parser).
  *
- * This asserts the decisive fact the launch-smoke specs don't: that the shared
- * bundle actually opens the LIBRARY editor frame, not its parent editor. The
- * window title is the discriminator — the parent bundle's default frame would
- * title itself "Schematic Editor" / "PCB Editor".
+ * This asserts the decisive fact the launch-smoke specs don't: that the merged
+ * bundle actually opens the REQUESTED frame. The window title is the discriminator —
+ * a dropped/ignored token would land on the build default ("PCB Editor") or a
+ * sibling editor's title.
  */
 
 interface FrameCase {
   harness: string;
-  /** title the library-editor frame settles on */
+  /** title the requested editor frame settles on */
   titleRe: RegExp;
-  /** the parent editor's title — must NOT appear (would mean --frame was ignored) */
-  parentRe: RegExp;
+  /** any OTHER editor's title — must NOT appear (would mean --frame went wrong) */
+  wrongRe: RegExp;
 }
 
 const CASES: FrameCase[] = [
-  { harness: 'symbol_editor.html',    titleRe: /Symbol Editor/i,    parentRe: /Schematic Editor/i },
-  { harness: 'footprint_editor.html', titleRe: /Footprint Editor/i, parentRe: /PCB Editor/i },
+  { harness: 'pcbnew.html',
+    titleRe: /PCB Editor/i,
+    wrongRe: /Schematic Editor|Symbol Editor|Footprint Editor/i },
+  { harness: 'footprint_editor.html',
+    titleRe: /Footprint Editor/i,
+    wrongRe: /PCB Editor|Schematic Editor|Symbol Editor/i },
+  { harness: 'eeschema.html',
+    titleRe: /Schematic Editor/i,
+    wrongRe: /PCB Editor|Footprint Editor|Symbol Editor/i },
+  { harness: 'symbol_editor.html',
+    titleRe: /Symbol Editor/i,
+    wrongRe: /PCB Editor|Schematic Editor|Footprint Editor/i },
 ];
 
 test.describe('editor-unification runtime frame (--frame)', () => {
   for (const tc of CASES) {
-    test(`${tc.harness} opens the library editor frame from its parent bundle`, async ({ page }) => {
+    test(`${tc.harness} opens its editor frame from the merged bundle`, async ({ page }) => {
       const consoleLines: string[] = [];
       page.on('console', (m) => consoleLines.push(m.text()));
       page.on('pageerror', (e) => consoleLines.push(`pageerror: ${e.message}`));
@@ -43,7 +56,7 @@ test.describe('editor-unification runtime frame (--frame)', () => {
       // The frame sets the document title once it is up; poll until it settles.
       await expect
         .poll(() => page.title(), {
-          message: `${tc.harness}: never reached the expected library-editor title`,
+          message: `${tc.harness}: never reached the expected editor title`,
           timeout: 120000,
           intervals: [1000],
         })
@@ -53,13 +66,14 @@ test.describe('editor-unification runtime frame (--frame)', () => {
       // eslint-disable-next-line no-console
       console.log(`[frame-runtime] ${tc.harness} -> title=${JSON.stringify(title)}`);
 
-      // The runtime --frame flag actually switched frames: the parent editor's
-      // title must not be what we ended up on.
-      expect(title, `${tc.harness}: opened the library editor, not its parent`).not.toMatch(tc.parentRe);
+      // The runtime --frame flag actually selected the right frame: no sibling
+      // editor's title.
+      expect(title, `${tc.harness}: opened the requested editor, not a sibling`).not.toMatch(tc.wrongRe);
 
-      // No WASM abort during load.
-      const aborted = consoleLines.some((l) => /Aborted\(/.test(l));
-      expect(aborted, 'no WASM abort during load').toBe(false);
+      // No WASM abort during load — and no duplicate embind registration (the
+      // merged dispatcher must register each shared JS name exactly once).
+      const aborted = consoleLines.some((l) => /Aborted\(|Cannot register public name/.test(l));
+      expect(aborted, 'no WASM abort / duplicate embind registration during load').toBe(false);
 
       await page.screenshot({ path: `test-results/frame-runtime-${tc.harness}.png`, scale: 'device' });
     });
diff --git a/tests/playwright-kicad.config.ts b/tests/playwright-kicad.config.ts
index 54af3b8..7b0d222 100644
--- a/tests/playwright-kicad.config.ts
+++ b/tests/playwright-kicad.config.ts
@@ -62,12 +62,15 @@ function findFreePort(): number {
 
 const port = resolvePort();
 
-// pcbnew's wasm (~190M debug build) exceeds SpiderMonkey's per-process code
+// The merged kicad_editor wasm (~190M+ debug build; pcbnew+eeschema engines in one
+// image since editor-unification Part 2) exceeds SpiderMonkey's per-process code
 // budget on x86-64 CI even with the baseline-only JIT (run 27343416511:
 // "InternalError: out of memory" at instantiation; the same module compiles
-// on arm64, whose denser code fits). V8 handles it, so on CI these specs run
-// on bundled Chromium (the 'chromium-ci' project) and firefox skips them.
-const PCBNEW_FAMILY_SPECS = [
+// on arm64, whose denser code fits). V8 handles it, so on CI every spec that
+// boots the merged module — i.e. ALL FOUR editors — runs on bundled Chromium
+// (the 'chromium-ci' project) and firefox skips them. Firefox keeps the small
+// separate bundles (pl_editor / calculator / gerbview).
+const BIG_MODULE_SPECS = [
   "**/pcbnew.spec.ts",
   "**/pcbnew-collab.spec.ts",
   "**/load-pcb.spec.ts",
@@ -75,9 +78,9 @@ const PCBNEW_FAMILY_SPECS = [
   // Specs added 2026-06-11..06-13 that boot pcbnew (pcbnew.html /
   // pcbnew-collab.html). Without routing here they ran on Firefox in CI and
   // timed out at instantiation (the SpiderMonkey/x86 code-budget OOM above).
-  // The last three are parametrized across pl_editor/eeschema/pcbnew; routing
-  // the whole file moves those variants to chromium-ci too (they boot fine on
-  // V8) — only the browser exercising them changes, not whether they run.
+  // appearance/roundtrip/save-hook are parametrized across pl_editor/eeschema/
+  // pcbnew; routing the whole file moves the small-bundle variants to chromium-ci
+  // too (they boot fine on V8) — only the browser changes, not whether they run.
   "**/appearance.spec.ts",
   "**/contextmenu-scrollbar-pcbnew.spec.ts",
   "**/dark-mode.spec.ts",
@@ -94,9 +97,18 @@ const PCBNEW_FAMILY_SPECS = [
   "**/3d-viewer-deadlock.spec.ts",
   "**/3d-viewer-models.spec.ts",
   "**/footprint-3d-preview.spec.ts",
-  // Parametrized over both library editors; the footprint case boots the pcbnew
-  // module (footprint_editor.html loads pcbnew.js) — same V8 routing, whole file.
+  // Parametrized over the library editors — both cases now boot the merged module.
   "**/frame-runtime.spec.ts",
+  // eeschema family: since Part 2 these boot the SAME merged kicad_editor module
+  // (eeschema.html / symbol_editor.html load kicad_editor.js) — same V8 routing.
+  "**/eeschema.spec.ts",
+  "**/eeschema-collab.spec.ts",
+  "**/eeschema-crosshair.spec.ts",
+  "**/eeschema-load.spec.ts",
+  "**/eeschema-subschema.spec.ts",
+  "**/eeschema-ui.spec.ts",
+  "**/eeschema-url-regex.spec.ts",
+  "**/symbol_editor.spec.ts",
 ];
 
 // Runtime-perf specs run ONLY on the Chromium 'perf' project below: they need
@@ -136,10 +148,11 @@ export default defineConfig({
       // Firefox is the default for headless testing (works on ARM Mac)
       name: "firefox",
       // Perf specs always run on the dedicated 'perf' project, never here. On CI
-      // the pcbnew-family specs also move to chromium-ci (see PCBNEW_FAMILY_SPECS).
+      // every merged-module (kicad_editor) spec moves to chromium-ci (see
+      // BIG_MODULE_SPECS).
       testIgnore: [
         ...PERF_SPECS,
-        ...(process.env.CI ? PCBNEW_FAMILY_SPECS : []),
+        ...(process.env.CI ? BIG_MODULE_SPECS : []),
       ],
       use: {
         ...devices["Desktop Firefox"],
@@ -159,7 +172,7 @@ export default defineConfig({
                   // Skip the no-GPU blocklist ("AllowWebgl2:false restricts
                   // context creation") so the GAL canvas gets a WebGL context.
                   "webgl.force-enabled": true,
-                  // pcbnew.wasm (~190M) OOMs the optimizing wasm JIT at compile
+                  // kicad_editor.wasm (~190M+) OOMs the optimizing wasm JIT at compile
                   // time ("InternalError: out of memory") and the app never boots.
                   // Baseline-only compilation trades runtime speed for a compile
                   // that fits in memory.
@@ -184,13 +197,13 @@ export default defineConfig({
       },
     },
     {
-      // CI-only carrier for the pcbnew-family specs (see PCBNEW_FAMILY_SPECS):
+      // CI-only carrier for the merged-module specs (see BIG_MODULE_SPECS):
       // Playwright-bundled Chromium, headless, software WebGL via SwiftShader
       // (fine on x86 Linux; the SwiftShader bug above is ARM-Mac-specific).
       // --enable-unsafe-swiftshader: newer Chromium refuses software WebGL in
       // headless without it.
       name: "chromium-ci",
-      testMatch: PCBNEW_FAMILY_SPECS,
+      testMatch: BIG_MODULE_SPECS,
       use: {
         ...devices["Desktop Chrome"],
         viewport: { width: 1280, height: 720 },
diff --git a/tests/scripts/setup-kicad-wasm.sh b/tests/scripts/setup-kicad-wasm.sh
index 8948b9b..efe91db 100755
--- a/tests/scripts/setup-kicad-wasm.sh
+++ b/tests/scripts/setup-kicad-wasm.sh
@@ -79,17 +79,17 @@ copy_app() {
 }
 
 found_any=0
-# symbol_editor / footprint_editor are NOT separate bundles: their harness HTMLs
-# (symbol_editor.html / footprint_editor.html) load the eeschema / pcbnew bundle
-# and select the frame at runtime via --frame (editor-unification).
-copy_app pcbnew           && found_any=1
-copy_app eeschema         && found_any=1
+# The four editors (pcbnew / eeschema / footprint_editor / symbol_editor) are ALL
+# served by the ONE merged kicad_editor bundle: their harness HTMLs load
+# kicad_editor.js and select the frame at runtime via --frame (editor-unification
+# Part 2).
+copy_app kicad_editor     && found_any=1
 copy_app calculator       && found_any=1
 copy_app pl_editor        && found_any=1
 copy_app gerbview         && found_any=1
 
 if [ "$found_any" -eq 0 ]; then
-    echo "Error: no pcbnew/eeschema/calculator/pl_editor/gerbview artifacts found in output/ or docker volume" >&2
+    echo "Error: no kicad_editor/calculator/pl_editor/gerbview artifacts found in output/ or docker volume" >&2
     exit 1
 fi
 
diff --git a/wasm/bindings/eeschema_embind.cpp b/wasm/bindings/eeschema_embind.cpp
index 0332368..214f0f5 100644
--- a/wasm/bindings/eeschema_embind.cpp
+++ b/wasm/bindings/eeschema_embind.cpp
@@ -54,6 +54,13 @@ using json = nlohmann::json;
 // frame is the app's top window and is a KIWAY_PLAYER. Returns the result of
 // OpenProjectFiles, or false if no frame is available — letting the JS caller
 // fall back to driving File→Open.
+//
+// KICAD_MERGED_EMBIND (kicad_editor, editor-unification Part 2): pcbnew_embind.cpp
+// defines the identical function and registers the same JS names — in the merged image
+// the frame-agnostic duplicates (this + kicadCollabOnSave) and the shared-name
+// registrations live once in kicad_editor_embind.cpp, which dispatches the per-editor
+// entries (renamed schCollab*/pcbCollab* below; JS-facing names are unchanged).
+#ifndef KICAD_MERGED_EMBIND
 bool kicadOpenFile( std::string path )
 {
     KIWAY_PLAYER* frame =
@@ -68,6 +75,7 @@ bool kicadOpenFile( std::string path )
     return frame->OpenProjectFiles(
             std::vector<wxString>( 1, wxString::FromUTF8( path.c_str() ) ) );
 }
+#endif // !KICAD_MERGED_EMBIND
 
 // ───────────────────────────── Yjs collaborative bridge ─────────────────────────────
 //
@@ -863,7 +871,7 @@ void collabTestMove( SCH_EDIT_FRAME* aFrame, SCH_ITEM* aItem, SCH_SCREEN* aScree
 // wxEvtHandler::CallAfter queues onto the app's pending-event list, which the wasm main
 // loop drains every frame via ProcessPendingEvents() (src/wasm/evtloop.cpp) — i.e. the
 // exact context real UI edits run in. So defer the whole mutation there.
-void kicadCollabApply( std::string aJson )
+void schCollabApply( std::string aJson )
 {
     json delta = json::parse( aJson, nullptr, /*allow_exceptions*/ false );
 
@@ -896,7 +904,7 @@ void kicadCollabApply( std::string aJson )
 
 // JS pull of the full current model as an all-"added" delta (seed/baseline). Also
 // registers the change listener on first call.
-std::string kicadCollabSnapshot()
+std::string schCollabSnapshot()
 {
     ensureBridge();
     json added = snapshotItems( schFrame() );
@@ -912,7 +920,7 @@ std::string kicadCollabSnapshot()
 
 // JS → C++, v2 items wire. Same CallAfter + COROUTINE context as kicadCollabApply
 // (LoadContent + SCH_COMMIT must run where native edits run).
-void kicadCollabApplyItems( std::string aJson )
+void schCollabApplyItems( std::string aJson )
 {
     json wire = json::parse( aJson, nullptr, /*allow_exceptions*/ false );
 
@@ -938,7 +946,7 @@ void kicadCollabApplyItems( std::string aJson )
 // JS pull of the ACTIVE screen's model as an all-"added" v2 items wire: one clipboard-
 // style blob per item on the current sheet (one collab room == one .kicad_sch screen).
 // Registers the listener + rebaselines exactly like kicadCollabSnapshot.
-std::string kicadCollabSnapshotItems()
+std::string schCollabSnapshotItems()
 {
     SCH_EDIT_FRAME* fr = schFrame();
 
@@ -965,7 +973,7 @@ std::string kicadCollabSnapshotItems()
 // Test/PoC helper: move the first schematic item by (dx,dy) IU via a real SCH_COMMIT,
 // firing the listener — a deterministic local edit for the two-tab demo / e2e.
 // Returns the moved item's uuid.
-std::string kicadCollabTestMoveFirst( int aDx, int aDy )
+std::string schCollabTestMoveFirst( int aDx, int aDy )
 {
     SCH_EDIT_FRAME* fr = schFrame();
 
@@ -993,7 +1001,7 @@ std::string kicadCollabTestMoveFirst( int aDx, int aDy )
 
 
 // Test helper: read an item's position by uuid as "x,y" (internal units).
-std::string kicadCollabGetPos( std::string aId )
+std::string schCollabGetPos( std::string aId )
 {
     SCH_EDIT_FRAME* fr = schFrame();
 
@@ -1022,6 +1030,9 @@ std::string kicadCollabGetPos( std::string aId )
 // kicad fork's save chokepoint (SCH_EDIT_FRAME::saveSchematicFile) after a
 // successful write to MEMFS, so the web app can route the saved bytes onward
 // (API upload, local-disk write-back, download). No-op without a JS listener.
+// KICAD_MERGED_EMBIND: identical definition in pcbnew_embind.cpp; the merged image
+// gets the one in kicad_editor_embind.cpp (both fork save chokepoints call it).
+#ifndef KICAD_MERGED_EMBIND
 extern "C" void kicadCollabOnSave( const char* aPath )
 {
     EM_ASM( {
@@ -1029,6 +1040,14 @@ extern "C" void kicadCollabOnSave( const char* aPath )
             window.kicadCollab.onSave( UTF8ToString( $0 ) );
     }, aPath );
 }
+#endif // !KICAD_MERGED_EMBIND
+
+// Merged-image dispatch probe (kicad_editor_embind.cpp): is the active top window the
+// schematic editor? Counterpart of pcbnew_embind.cpp's pcbEditorActive().
+bool schEditorActive()
+{
+    return schFrame() != nullptr;
+}
 
 
 void kicadSaveSchematic( std::string path )
@@ -1064,17 +1083,22 @@ void kicadSaveSchematic( std::string path )
 
 
 EMSCRIPTEN_BINDINGS(eeschema) {
-    // Programmatic file open (preferred over UI automation from the web app).
-    function("kicadOpenFile", &kicadOpenFile);
     // Programmatic save of the in-memory schematic (round-trip tests, README §A).
     function("kicadSaveSchematic", &kicadSaveSchematic);
+
+#ifndef KICAD_MERGED_EMBIND
+    // JS names ALSO registered by pcbnew_embind.cpp — in the merged image these are
+    // registered once by kicad_editor_embind.cpp, dispatching on the active frame.
+    // Programmatic file open (preferred over UI automation from the web app).
+    function("kicadOpenFile", &kicadOpenFile);
     // Yjs collaborative bridge entry points (same contract as pl_editor).
-    function("kicadCollabApply", &kicadCollabApply);
-    function("kicadCollabSnapshot", &kicadCollabSnapshot);
+    function("kicadCollabApply", &schCollabApply);
+    function("kicadCollabSnapshot", &schCollabSnapshot);
     // v2 items bridge: per-item s-expr payloads (ysync 0008).
-    function("kicadCollabApplyItems", &kicadCollabApplyItems);
-    function("kicadCollabSnapshotItems", &kicadCollabSnapshotItems);
-    function("kicadCollabTestMoveFirst", &kicadCollabTestMoveFirst);
-    function("kicadCollabGetPos", &kicadCollabGetPos);
+    function("kicadCollabApplyItems", &schCollabApplyItems);
+    function("kicadCollabSnapshotItems", &schCollabSnapshotItems);
+    function("kicadCollabTestMoveFirst", &schCollabTestMoveFirst);
+    function("kicadCollabGetPos", &schCollabGetPos);
+#endif // !KICAD_MERGED_EMBIND
 }
 #endif
diff --git a/wasm/bindings/kicad_editor_embind.cpp b/wasm/bindings/kicad_editor_embind.cpp
new file mode 100644
index 0000000..6e29fbe
--- /dev/null
+++ b/wasm/bindings/kicad_editor_embind.cpp
@@ -0,0 +1,136 @@
+/*
+ * Embind dispatcher for the merged kicad_editor WASM image (editor-unification Part 2).
+ *
+ * The pcbnew and eeschema binding TUs each implement the collab bridge for their own
+ * frame and, standalone, register the SAME JS-facing names. In the merged image both
+ * TUs are compiled with -DKICAD_MERGED_EMBIND, which
+ *   - compiles out their duplicate frame-agnostic definitions (kicadOpenFile,
+ *     extern "C" kicadCollabOnSave) — the single definitions live HERE, and
+ *   - compiles out their shared-name EMSCRIPTEN_BINDINGS registrations — registered
+ *     once HERE, dispatching to the renamed per-editor entries (pcbCollab… and
+ *     schCollab…) on whichever editor frame is live. Per-editor unique names
+ *     (kicadSaveBoard, kicadSaveSchematic, kicadCollabTestItemBlob, Board_…) keep
+ *     flowing from the per-editor blocks unchanged.
+ *
+ * With the one-frame-per-page-load model exactly one of pcbEditorActive() /
+ * schEditorActive() is true — the same dynamic_cast probe every per-editor entry
+ * already starts with. JS-facing names and signatures are IDENTICAL to the standalone
+ * bundles, so the web app and tests need no per-bundle API differences.
+ *
+ * Deliberately header-light: no pcbnew/eeschema headers (avoids mixing both include
+ * roots in one TU); only the generic KIWAY_PLAYER surface + the extern declarations.
+ */
+
+#ifdef __EMSCRIPTEN__
+#include <emscripten.h>
+#include <emscripten/bind.h>
+#include <string>
+#include <vector>
+#include <wx/app.h>
+#include <wx/string.h>
+#include <wx/window.h>
+#include <kiway.h>
+#include <kiway_player.h>
+
+using namespace emscripten;
+
+// Per-editor entry points and frame probes — defined (with external linkage) in
+// pcbnew_embind.cpp / eeschema_embind.cpp.
+bool        pcbEditorActive();
+void        pcbCollabApply( std::string aJson );
+void        pcbCollabApplyItems( std::string aJson );
+std::string pcbCollabSnapshot();
+std::string pcbCollabSnapshotItems();
+std::string pcbCollabTestMoveFirst( int aDx, int aDy );
+std::string pcbCollabGetPos( std::string aId );
+
+bool        schEditorActive();
+void        schCollabApply( std::string aJson );
+void        schCollabApplyItems( std::string aJson );
+std::string schCollabSnapshot();
+std::string schCollabSnapshotItems();
+std::string schCollabTestMoveFirst( int aDx, int aDy );
+std::string schCollabGetPos( std::string aId );
+
+
+// Programmatically open a project file in the running editor frame, without UI
+// automation. Frame-agnostic (any KIWAY_PLAYER); byte-identical to the definition the
+// standalone bundles compile from their own binding TU.
+static bool kicadOpenFile( std::string path )
+{
+    KIWAY_PLAYER* frame =
+            wxTheApp ? static_cast<KIWAY_PLAYER*>( wxTheApp->GetTopWindow() ) : nullptr;
+
+    if( !frame )
+        return false;
+
+    if( wxWindow* blocking = frame->Kiway().GetBlockingDialog() )
+        blocking->Close( true );
+
+    return frame->OpenProjectFiles(
+            std::vector<wxString>( 1, wxString::FromUTF8( path.c_str() ) ) );
+}
+
+
+// C++ → JS save notification. Called from BOTH fork save chokepoints
+// (PCB_EDIT_FRAME::SavePcbFile and SCH_EDIT_FRAME::saveSchematicFile) — one shared
+// definition serves the merged image. No-op without a JS listener.
+extern "C" void kicadCollabOnSave( const char* aPath )
+{
+    EM_ASM( {
+        if( window.kicadCollab && window.kicadCollab.onSave )
+            window.kicadCollab.onSave( UTF8ToString( $0 ) );
+    }, aPath );
+}
+
+
+// Dispatch shims: route each shared JS name to the live editor's implementation.
+// The sch path is the fallback arm so a JS call with NO frame up behaves like the
+// standalone bundles (the per-editor impls no-op / return empty on a null frame).
+static void collabApply( std::string aJson )
+{
+    pcbEditorActive() ? pcbCollabApply( aJson ) : schCollabApply( aJson );
+}
+
+static void collabApplyItems( std::string aJson )
+{
+    pcbEditorActive() ? pcbCollabApplyItems( aJson ) : schCollabApplyItems( aJson );
+}
+
+static std::string collabSnapshot()
+{
+    return pcbEditorActive() ? pcbCollabSnapshot() : schCollabSnapshot();
+}
+
+static std::string collabSnapshotItems()
+{
+    return pcbEditorActive() ? pcbCollabSnapshotItems() : schCollabSnapshotItems();
+}
+
+static std::string collabTestMoveFirst( int aDx, int aDy )
+{
+    return pcbEditorActive() ? pcbCollabTestMoveFirst( aDx, aDy )
+                             : schCollabTestMoveFirst( aDx, aDy );
+}
+
+static std::string collabGetPos( std::string aId )
+{
+    return pcbEditorActive() ? pcbCollabGetPos( aId ) : schCollabGetPos( aId );
+}
+
+
+EMSCRIPTEN_BINDINGS(kicad_editor) {
+    // Programmatic file open (preferred over UI automation from the web app).
+    function("kicadOpenFile", &kicadOpenFile);
+
+    // Yjs collaborative bridge entry points — same JS contract as the standalone
+    // bundles, dispatched on the active editor frame.
+    function("kicadCollabApply", &collabApply);
+    function("kicadCollabSnapshot", &collabSnapshot);
+    function("kicadCollabApplyItems", &collabApplyItems);
+    function("kicadCollabSnapshotItems", &collabSnapshotItems);
+    function("kicadCollabTestMoveFirst", &collabTestMoveFirst);
+    function("kicadCollabGetPos", &collabGetPos);
+}
+
+#endif // __EMSCRIPTEN__
diff --git a/wasm/bindings/pcbnew_embind.cpp b/wasm/bindings/pcbnew_embind.cpp
index 8bc2c07..4773511 100644
--- a/wasm/bindings/pcbnew_embind.cpp
+++ b/wasm/bindings/pcbnew_embind.cpp
@@ -55,6 +55,13 @@ using json = nlohmann::json;
 // the editor frame is the app's top window and is a KIWAY_PLAYER. Returns the
 // result of OpenProjectFiles, or false if no frame is available — letting the
 // JS caller fall back to driving File→Open.
+//
+// KICAD_MERGED_EMBIND (kicad_editor, editor-unification Part 2): eeschema_embind.cpp
+// defines the identical function and registers the same JS names — in the merged image
+// the frame-agnostic duplicates (this + kicadCollabOnSave) and the shared-name
+// registrations live once in kicad_editor_embind.cpp, which dispatches the per-editor
+// entries (renamed pcbCollab*/schCollab* below; JS-facing names are unchanged).
+#ifndef KICAD_MERGED_EMBIND
 bool kicadOpenFile( std::string path )
 {
     KIWAY_PLAYER* frame =
@@ -69,6 +76,7 @@ bool kicadOpenFile( std::string path )
     return frame->OpenProjectFiles(
             std::vector<wxString>( 1, wxString::FromUTF8( path.c_str() ) ) );
 }
+#endif // !KICAD_MERGED_EMBIND
 
 // ───────────────────────────── Yjs collaborative bridge ─────────────────────────────
 //
@@ -912,7 +920,7 @@ void collabTestMove( PCB_EDIT_FRAME* aFrame, BOARD_ITEM* aItem, int aDx, int aDy
 // fiber stack: BOARD_COMMIT::Push's CHT_ADD of a freshly-built item dispatches GAL virtuals
 // (view->Add → ViewGetLayers) through asyncify-instrumented invoke_*; off the fiber stack those
 // mis-dispatch and trap inside KiCad core, on it they dispatch correctly (eeschema 0007).
-void kicadCollabApply( std::string aJson )
+void pcbCollabApply( std::string aJson )
 {
     json delta = json::parse( aJson, nullptr, /*allow_exceptions*/ false );
 
@@ -937,7 +945,7 @@ void kicadCollabApply( std::string aJson )
 
 // JS → C++, v2 items wire. Same CallAfter + COROUTINE context as kicadCollabApply
 // (the blob parse + commit must run where native edits run — see above).
-void kicadCollabApplyItems( std::string aJson )
+void pcbCollabApplyItems( std::string aJson )
 {
     json wire = json::parse( aJson, nullptr, /*allow_exceptions*/ false );
 
@@ -962,7 +970,7 @@ void kicadCollabApplyItems( std::string aJson )
 
 // JS pull of the full current model as an all-"added" delta (seed/baseline). Also registers the
 // change listener on first call.
-std::string kicadCollabSnapshot()
+std::string pcbCollabSnapshot()
 {
     BOARD* board = ensureBridge();
 
@@ -985,7 +993,7 @@ std::string kicadCollabSnapshot()
 // JS pull of the full current model as an all-"added" v2 items wire: one blob per ROOT
 // item (a footprint's blob embeds its children — the TS side flattens). Registers the
 // listener + rebaselines exactly like kicadCollabSnapshot.
-std::string kicadCollabSnapshotItems()
+std::string pcbCollabSnapshotItems()
 {
     BOARD* board = ensureBridge();
 
@@ -1020,6 +1028,9 @@ std::string kicadCollabSnapshotItems()
 // kicad fork's save chokepoint (PCB_EDIT_FRAME::SavePcbFile) after a successful
 // write to MEMFS, so the web app can route the saved bytes onward (API upload,
 // local-disk write-back, download). No-op without a JS listener.
+// KICAD_MERGED_EMBIND: identical definition in eeschema_embind.cpp; the merged image
+// gets the one in kicad_editor_embind.cpp (both fork save chokepoints call it).
+#ifndef KICAD_MERGED_EMBIND
 extern "C" void kicadCollabOnSave( const char* aPath )
 {
     EM_ASM( {
@@ -1027,6 +1038,15 @@ extern "C" void kicadCollabOnSave( const char* aPath )
             window.kicadCollab.onSave( UTF8ToString( $0 ) );
     }, aPath );
 }
+#endif // !KICAD_MERGED_EMBIND
+
+// Merged-image dispatch probe (kicad_editor_embind.cpp): is the active top window the
+// PCB editor? Each shared JS entry routes to the pcb*/sch* implementation whose frame
+// is live — exactly the null-check its body starts with anyway.
+bool pcbEditorActive()
+{
+    return pcbFrame() != nullptr;
+}
 
 
 void kicadSaveBoard( std::string path )
@@ -1057,7 +1077,7 @@ void kicadSaveBoard( std::string path )
 // Test/PoC helper: move the first top-level board item by (dx,dy) IU via a real BOARD_COMMIT,
 // firing the listener — a deterministic local edit for the two-tab demo / e2e. Returns the
 // moved item's uuid.
-std::string kicadCollabTestMoveFirst( int aDx, int aDy )
+std::string pcbCollabTestMoveFirst( int aDx, int aDy )
 {
     PCB_EDIT_FRAME* fr = pcbFrame();
 
@@ -1090,7 +1110,7 @@ std::string kicadCollabTestMoveFirst( int aDx, int aDy )
 
 
 // Test helper: read an item's position by uuid as "x,y" (internal units).
-std::string kicadCollabGetPos( std::string aId )
+std::string pcbCollabGetPos( std::string aId )
 {
     PCB_EDIT_FRAME* fr = pcbFrame();
 
@@ -1194,19 +1214,24 @@ EMSCRIPTEN_BINDINGS(pcbnew) {
     function("Pad_GetNumber", &Pad_GetNumber, allow_raw_pointers());
     function("Pad_GetPinFunction", &Pad_GetPinFunction, allow_raw_pointers());
 
-    // Programmatic file open (preferred over UI automation from the web app).
-    function("kicadOpenFile", &kicadOpenFile);
     // Programmatic save of the in-memory board (round-trip tests, README §A).
     function("kicadSaveBoard", &kicadSaveBoard);
-
-    // Yjs collaborative bridge entry points (same contract as pl_editor / eeschema).
-    function("kicadCollabApply", &kicadCollabApply);
-    function("kicadCollabSnapshot", &kicadCollabSnapshot);
-    // v2 items bridge: per-item s-expr payloads (ysync 0008).
-    function("kicadCollabApplyItems", &kicadCollabApplyItems);
-    function("kicadCollabSnapshotItems", &kicadCollabSnapshotItems);
-    function("kicadCollabTestMoveFirst", &kicadCollabTestMoveFirst);
-    function("kicadCollabGetPos", &kicadCollabGetPos);
+    // pcbnew-only test helper (no eeschema counterpart — name is not shared).
     function("kicadCollabTestItemBlob", &kicadCollabTestItemBlob);
+
+#ifndef KICAD_MERGED_EMBIND
+    // JS names ALSO registered by eeschema_embind.cpp — in the merged image these are
+    // registered once by kicad_editor_embind.cpp, dispatching on the active frame.
+    // Programmatic file open (preferred over UI automation from the web app).
+    function("kicadOpenFile", &kicadOpenFile);
+    // Yjs collaborative bridge entry points (same contract as pl_editor / eeschema).
+    function("kicadCollabApply", &pcbCollabApply);
+    function("kicadCollabSnapshot", &pcbCollabSnapshot);
+    // v2 items bridge: per-item s-expr payloads (ysync 0008).
+    function("kicadCollabApplyItems", &pcbCollabApplyItems);
+    function("kicadCollabSnapshotItems", &pcbCollabSnapshotItems);
+    function("kicadCollabTestMoveFirst", &pcbCollabTestMoveFirst);
+    function("kicadCollabGetPos", &pcbCollabGetPos);
+#endif // !KICAD_MERGED_EMBIND
 }
 #endif
diff --git a/wasm/editor/CMakeLists.txt b/wasm/editor/CMakeLists.txt
new file mode 100644
index 0000000..5365807
--- /dev/null
+++ b/wasm/editor/CMakeLists.txt
@@ -0,0 +1,57 @@
+# Merged pcbnew+eeschema WASM editor (editor-unification Part 2).
+#
+# ONE executable links BOTH kifaces; the editor frame (PCB / Footprint / Schematic /
+# Symbol) is chosen at runtime by single_top.cpp's --frame flag. Added from the kicad
+# fork's top-level CMakeLists.txt via add_subdirectory( ${KICAD_WASM_LAYER}/editor )
+# when EMSCRIPTEN AND KICAD_WASM_MERGED_EDITOR — after eeschema/ and pcbnew/, so both
+# kifaces' CACHE INTERNAL library lists exist here.
+#
+# Collision handling (see KICAD_WASM_PCB_SIDE_RENAMES in the fork's top-level
+# CMakeLists.txt and docs/features/editor-unification/): the PCB-side targets compile
+# with per-engine symbol renames; each kiface gets its own KIFACE_GETTER name; the
+# plain Kiface() the shared common/ code falls back to is defined here
+# (merged_kiface_dispatch.cpp).
+#
+# The standalone pcbnew/eeschema targets still exist in this (option-ON) tree but are
+# not intended to be built here: their kiface objects carry the merged renames, and
+# their single_top TUs still bind the un-renamed KIFACE_GETTER — build them from their
+# own (option-OFF) per-app trees as before.
+
+include_directories( BEFORE ${INC_BEFORE} )
+include_directories(
+    ${CMAKE_SOURCE_DIR}/common
+    ${CMAKE_SOURCE_DIR}/common/dialogs
+    ${INC_AFTER}
+    )
+
+add_executable( kicad_editor
+    ${CMAKE_SOURCE_DIR}/common/single_top.cpp
+    merged_kiface_dispatch.cpp
+    )
+
+# TOP_FRAME is only the DEFAULT frame (no --frame given). No PGM_DATA_FILE_EXT: the
+# runtime extension map in single_top.cpp covers all four frames. No BUILD_KIWAY_DLL:
+# static kiface linking (matches the per-app WASM executables). KICAD_MERGED_KIFACES
+# selects single_top.cpp's dual-getter registration branch.
+set_source_files_properties( ${CMAKE_SOURCE_DIR}/common/single_top.cpp PROPERTIES
+    COMPILE_DEFINITIONS "TOP_FRAME=FRAME_PCB_EDITOR;KICAD_MERGED_KIFACES"
+    )
+
+# Both kifaces' full library sets (exported CACHE INTERNAL by pcbnew/ and eeschema/).
+# The overlap (common, kicommon, gal, ...) is deduped; generator-expression entries
+# (native-only pads_common/pcm) are inert strings that evaluate to nothing here.
+set( KICAD_EDITOR_LIBS ${PCBNEW_KIFACE_LIBRARIES} ${EESCHEMA_KIFACE_LIBRARIES} )
+list( REMOVE_DUPLICATES KICAD_EDITOR_LIBS )
+
+target_link_libraries( kicad_editor PRIVATE ${KICAD_EDITOR_LIBS} )
+
+# Same link shape as the standalone pcbnew WASM executable: allow-multiple-definition
+# for the wx/KiCad dupes, and --whole-archive pcbcommon so RTTI-only-referenced
+# vtables/typeinfo are pulled in.
+target_link_options( kicad_editor PRIVATE
+    "LINKER:--allow-multiple-definition"
+    "LINKER:--whole-archive"
+    "$<TARGET_FILE:pcbcommon>"
+    "LINKER:--no-whole-archive"
+    $<$<BOOL:${KICAD_MAKE_LINK_MAPS}>:-Wl,--cref,-Map=kicad_editor.map>
+    )
diff --git a/wasm/editor/merged_kiface_dispatch.cpp b/wasm/editor/merged_kiface_dispatch.cpp
new file mode 100644
index 0000000..b231e7b
--- /dev/null
+++ b/wasm/editor/merged_kiface_dispatch.cpp
@@ -0,0 +1,68 @@
+/*
+ * Merged-editor safety-net Kiface() (editor-unification Part 2).
+ *
+ * In the merged kicad_editor image the pcbnew and eeschema kifaces are compiled with
+ * -DKiface=PcbKiface / -DKiface=SchKiface, so every module-owned call site binds
+ * statically to its own engine. The handful of shared common/ call sites are patched
+ * to resolve their owning frame's kiface exactly (eda_base_frame.cpp,
+ * dialog_color_picker.cpp, design_block_tree_model_adapter.cpp) and only FALL BACK to
+ * the plain Kiface() — which, in this image, is THIS definition. It also keeps any
+ * future upstream common/ caller linking.
+ *
+ * Resolution is best-effort by design: focused window → top window → KIWAY top frame,
+ * walking parents to an EDA_BASE_FRAME whose FRAME_T names its face. With the one-
+ * frame-per-page-load model there is exactly one editor frame, so the walk is exact
+ * in practice; FACE_PCB is the last-resort default.
+ */
+
+#ifdef __EMSCRIPTEN__
+
+#include <wx/app.h>
+#include <wx/window.h>
+
+#include <kiway.h>
+#include <kiface_base.h>
+#include <eda_base_frame.h>
+
+// single_top.cpp's process-global KIWAY (declared in kiway.h).
+static KIFACE_BASE* frameKiface( wxWindow* aWindow )
+{
+    for( wxWindow* w = aWindow; w; w = w->GetParent() )
+    {
+        if( EDA_BASE_FRAME* frame = dynamic_cast<EDA_BASE_FRAME*>( w ) )
+        {
+            KIWAY::FACE_T face = KIWAY::KifaceType( frame->GetFrameType() );
+
+            if( face != KIWAY::FACE_T( -1 ) )
+            {
+                if( KIFACE* kiface = Kiway.KiFACE( face ) )
+                    return static_cast<KIFACE_BASE*>( kiface );
+            }
+        }
+    }
+
+    return nullptr;
+}
+
+
+KIFACE_BASE& Kiface()
+{
+    if( KIFACE_BASE* kiface = frameKiface( wxWindow::FindFocus() ) )
+        return *kiface;
+
+    if( wxTheApp )
+    {
+        if( KIFACE_BASE* kiface = frameKiface( wxTheApp->GetTopWindow() ) )
+            return *kiface;
+    }
+
+    if( KIFACE_BASE* kiface = frameKiface( Kiway.GetTop() ) )
+        return *kiface;
+
+    // Last resort — no frame up yet. FACE_PCB is the merged image's default TOP_FRAME
+    // face; both faces are registered in OnPgmInit, so this cannot be reached before
+    // registration in any path that previously had a working Kiface().
+    return *static_cast<KIFACE_BASE*>( Kiway.KiFACE( KIWAY::FACE_PCB ) );
+}
+
+#endif // __EMSCRIPTEN__
diff --git a/web/standalone/src/wasm/boot.ts b/web/standalone/src/wasm/boot.ts
index 9cbc926..53f4b78 100644
--- a/web/standalone/src/wasm/boot.ts
+++ b/web/standalone/src/wasm/boot.ts
@@ -8,6 +8,7 @@ import {
   TOOL_BUNDLE,
   TOOL_LIB_KIND,
   TOOL_NEEDS_CONFIG_SEED,
+  type Bundle,
 } from "./constants";
 import { installModel3dHandler } from "./libs/models-bridge";
 import type { Model3dSource } from "./libs/models-source";
@@ -125,10 +126,10 @@ function loadScript(src: string): Promise<void> {
  */
 function pthreadWorkerScript(
   base: string,
-  tool: Tool,
+  bundle: Bundle,
   traceMask?: string | null,
 ): string | Blob {
-  const abs = new URL(`${base}/${tool}.js`, window.location.href);
+  const abs = new URL(`${base}/${bundle}.js`, window.location.href);
   // ?trace=<mask>: seed `self.__KICAD_TRACE__` in EVERY pthread worker's scope
   // before it importScripts the glue. With PROXY_TO_PTHREAD the C main()/UI (and
   // thus TRACE_MANAGER) run on a pthread, so the trace env must be set in the
@@ -143,7 +144,7 @@ function pthreadWorkerScript(
       { type: "text/javascript" },
     );
   }
-  if (abs.origin === window.location.origin) return `${base}/${tool}.js`;
+  if (abs.origin === window.location.origin) return `${base}/${bundle}.js`;
   return new Blob([`importScripts(${JSON.stringify(abs.href)});`], {
     type: "text/javascript",
   });
@@ -204,7 +205,7 @@ async function doBoot(opts: BootOptions): Promise<void> {
   // The deployed bundle backing this tool. footprint_editor/symbol_editor share
   // the pcbnew/eeschema engine, so their `.wasm`/`.js`/pthread-worker files are the
   // parent's; `tool` still drives identity (thisProgram), config-seed and lib-kind.
-  const bundle = TOOL_BUNDLE[tool] ?? tool;
+  const bundle = TOOL_BUNDLE[tool];
   const w = window as ToolWindow;
 
   // The wasm reads the top-level frame geometry from a GLOBAL `mainWindow`
diff --git a/web/standalone/src/wasm/constants.ts b/web/standalone/src/wasm/constants.ts
index 91195dd..a953e52 100644
--- a/web/standalone/src/wasm/constants.ts
+++ b/web/standalone/src/wasm/constants.ts
@@ -35,20 +35,32 @@ export const TOOL_ARGV0: Record<Tool, string> = {
 };
 
 /**
- * Which deployed WASM bundle actually backs each tool. `footprint_editor` and
- * `symbol_editor` are the SAME compiled engine as `pcbnew` / `eeschema` — they
- * were only ever a second launcher pinned to a different build-time frame — so
- * after editor-unification they load the parent bundle and select their frame at
- * runtime (see `TOOL_FRAME`). Every other tool backs its own bundle. Used to
- * resolve the CDN asset folder and the `<bundle>.{wasm,js}` filenames.
+ * A deployed WASM bundle (CDN folder + `<bundle>.{wasm,js}` basenames). NOT the same
+ * space as `Tool`: since editor-unification Part 2 the four editor TOOLS (pcbnew,
+ * eeschema, footprint_editor, symbol_editor) are all served by the ONE merged
+ * `kicad_editor` bundle — two engines (kifaces) statically linked, the frame chosen
+ * at runtime (`TOOL_FRAME`). Deliberately not part of the `TOOLS` enum: a bundle is
+ * a delivery artifact, not a user-facing tool/route.
  */
-export const TOOL_BUNDLE: Record<Tool, Tool> = {
-  pcbnew: "pcbnew",
-  eeschema: "eeschema",
+export type Bundle =
+  | "kicad_editor"
+  | "calculator"
+  | "pl_editor"
+  | "gerbview";
+
+/**
+ * Which deployed WASM bundle actually backs each tool. The four editors share the
+ * merged `kicad_editor` engine image (editor-unification Part 2); the remaining
+ * tools are genuinely separate engines and back their own bundles. Used to resolve
+ * the CDN asset folder and the `<bundle>.{wasm,js}` filenames.
+ */
+export const TOOL_BUNDLE: Record<Tool, Bundle> = {
+  pcbnew: "kicad_editor",
+  eeschema: "kicad_editor",
   calculator: "calculator",
   pl_editor: "pl_editor",
-  symbol_editor: "eeschema",
-  footprint_editor: "pcbnew",
+  symbol_editor: "kicad_editor",
+  footprint_editor: "kicad_editor",
   gerbview: "gerbview",
 };
 
@@ -58,10 +70,13 @@ export const TOOL_BUNDLE: Record<Tool, Tool> = {
  * opens a specific editor frame. Tools whose bundle already defaults to the right
  * frame need no token (`undefined`). Tokens mirror `kicad/kicad.cpp`'s `--frame`
  * parser, plus `symedit` for the symbol editor (which upstream's CLI lacks).
+ * The merged bundle's build-time default is the PCB editor, so every editor tool
+ * passes its token explicitly (pcbnew included — cheap insurance over relying on
+ * the default).
  */
 export const TOOL_FRAME: Record<Tool, string | undefined> = {
-  pcbnew: undefined,
-  eeschema: undefined,
+  pcbnew: "pcb",
+  eeschema: "sch",
   calculator: undefined,
   pl_editor: undefined,
   symbol_editor: "symedit",
diff --git a/web/standalone/src/wasm/wasm-assets.ts b/web/standalone/src/wasm/wasm-assets.ts
index e09a50d..bbc1cf6 100644
--- a/web/standalone/src/wasm/wasm-assets.ts
+++ b/web/standalone/src/wasm/wasm-assets.ts
@@ -43,10 +43,10 @@ export async function resolveWasmBase(
 ): Promise<string> {
   if (override) return override.replace(/\/+$/, "");
   if (!WASM_MANIFEST_FILE) return WASM_ROOT; // flat (dev / same-origin)
-  // A tool may be served by a shared bundle (footprint_editor→pcbnew,
-  // symbol_editor→eeschema); resolve the folder/version of the bundle, not the
-  // logical tool (the merged bundles are the only ones published).
-  const bundle = TOOL_BUNDLE[tool] ?? tool;
+  // A tool may be served by a shared bundle (all four editors → kicad_editor);
+  // resolve the folder/version of the bundle, not the logical tool (bundles are
+  // the only thing published/listed in the manifest).
+  const bundle = TOOL_BUNDLE[tool];
   const manifest = await loadManifest();
   const ver = manifest.tools?.[bundle];
   if (!ver) {