573 lines
25 KiB
JavaScript
573 lines
25 KiB
JavaScript
// english. other language maps will defer to english
|
|
// map for any missing key/value pairs
|
|
kiri.lang['en'] =
|
|
kiri.lang['en-us'] = {
|
|
version: "version",
|
|
enable: "enable",
|
|
settings: "settings",
|
|
|
|
acct_xpo: "make a backup of your device\nand device profiles with the\noption to include workspace\nobjects and positions",
|
|
|
|
// DEVICE dialog groups
|
|
dv_gr_dev: "device",
|
|
dv_gr_ext: "extruder",
|
|
dv_gr_out: "output",
|
|
dv_gr_gco: "gcode macros",
|
|
|
|
// DEVICE dialog (_s = label, _l = hover help)
|
|
dv_name_s: "name",
|
|
dv_name_l: "device name",
|
|
dv_fila_s: "filament",
|
|
dv_fila_l: "diameter in millimeters",
|
|
dv_nozl_s: "nozzle",
|
|
dv_nozl_l: "diameter in millimeters",
|
|
dv_bedw_s: "width",
|
|
dv_bedw_l: "workspace units",
|
|
dv_bedd_s: "depth",
|
|
dv_bedd_l: "workspace units",
|
|
dv_bedh_s: "height",
|
|
dv_bedh_l: "max build height\nin workspace units",
|
|
dv_spmx_s: "max spindle",
|
|
dv_spmx_l: "max spindle rpm speed\n0 to disable",
|
|
dv_xtab_s: "absolute positioning",
|
|
dv_xtab_l: "extrusion moves absolute",
|
|
dv_orgc_s: "origin center",
|
|
dv_orgc_l: "bed origin center",
|
|
// dv_orgt_s: "origin top",
|
|
// dv_orgt_l: "part z origin top",
|
|
dv_bedc_s: "circular bed",
|
|
dv_bedc_l: "device bed is circular",
|
|
dv_belt_s: "belt bed",
|
|
dv_belt_l: "continuous printing bed",
|
|
dv_fanp_s: "fan power",
|
|
dv_fanp_l: "set cooling fan power",
|
|
dv_prog_s: "progress",
|
|
dv_prog_l: "output on each % progress",
|
|
dv_layr_s: "layer",
|
|
dv_layr_l: "output at each\nlayer change",
|
|
dv_tksp_s: "token spacer",
|
|
dv_tksp_l: "add a space between\ngcode axis parameters\nG0X0Y0X0\nvs\nG0 X0 Y0 Z0",
|
|
dv_strc_s: "strip comments",
|
|
dv_strc_l: "strip gcode comments\ncomments begin with ;",
|
|
dv_fext_s: "file extension",
|
|
dv_fext_l: "file name extension",
|
|
dv_dwll_s: "dwell",
|
|
dv_dwll_l: "gcode dwell script",
|
|
dv_tool_s: "tool change",
|
|
dv_tool_l: "tool change script",
|
|
dv_sspd_s: "spindle speed",
|
|
dv_sspd_l: "set spindle speed",
|
|
dv_paus_s: "pause",
|
|
dv_paus_l: "gcode pause script",
|
|
dv_head_s: "header",
|
|
dv_head_l: "gcode header script",
|
|
dv_foot_s: "footer",
|
|
dv_foot_l: "gcode footer script",
|
|
dv_lzon_s: "laser on",
|
|
dv_lzon_l: "gcode laser on script",
|
|
dv_lzof_s: "laser off",
|
|
dv_lzof_l: "gcode laser off script",
|
|
dv_exts_s: "select",
|
|
dv_exts_l: "gcode run to enable this extruder",
|
|
dv_dext_s: "deselect",
|
|
dv_dext_l: "gcode run before enabling another extruder",
|
|
dv_extd_s: "deselect",
|
|
dv_extd_l: "gcode to deselect this extruder",
|
|
dv_exox_s: "offset x",
|
|
dv_exox_l: "nozzle offset x",
|
|
dv_exoy_s: "offset y",
|
|
dv_exoy_l: "nozzle offset y",
|
|
|
|
// MODE
|
|
mo_menu: "mode",
|
|
mo_fdmp: "FDM Print",
|
|
mo_slap: "SLA Print",
|
|
mo_lazr: "Laser Cut",
|
|
mo_cncm: "CNC Mill",
|
|
|
|
// SETUP
|
|
su_menu: "setup",
|
|
su_devi: "Devices",
|
|
su_tool: "Tools",
|
|
su_locl: "Local",
|
|
su_xprt: "Export",
|
|
su_help: "Help",
|
|
|
|
// LOAD
|
|
fe_menu: "file",
|
|
fn_recn: "Recent",
|
|
fn_impo: "Import",
|
|
|
|
// FUNCTION
|
|
fn_menu: "action",
|
|
fn_arra: "Arrange",
|
|
fn_slic: "Slice",
|
|
fn_prev: "Preview",
|
|
fn_expo: "Export",
|
|
|
|
// VIEW
|
|
vu_menu: "view",
|
|
vu_home: "Home",
|
|
vu_rset: "Reset",
|
|
vu_sptp: "Top",
|
|
vu_spfr: "Front",
|
|
vu_splt: "Left",
|
|
vu_sprt: "Right",
|
|
|
|
// WORKSPACE
|
|
ws_menu: "view",
|
|
ws_save: "Save",
|
|
ws_cler: "Clear",
|
|
|
|
// OPTIONS
|
|
op_menu: "interface",
|
|
op_disp: "display",
|
|
op_xprt_s: "expert",
|
|
op_xprt_l: "show more settings options",
|
|
op_decl_s: "decals",
|
|
op_decl_l: "show device decals and logos",
|
|
op_dang_s: "experimental",
|
|
op_dang_l: "show experimental parameters",
|
|
op_hopo_s: "hover pop",
|
|
op_hopo_l: "enable menu hover\nto activate",
|
|
op_dark_s: "dark mode",
|
|
op_dark_l: "dark mode interface",
|
|
op_comp_s: "compact ui",
|
|
op_comp_l: "compact user interface\nbetter for small screens\nand tablets",
|
|
op_shor_s: "show origin",
|
|
op_shor_l: "show device or process origin",
|
|
op_shru_s: "show rulers",
|
|
op_shru_l: "show axes rulers\non major gridlines",
|
|
op_sped_s: "show speeds",
|
|
op_sped_l: "show speed to color bar\nin preview mode",
|
|
op_auto_s: "auto layout",
|
|
op_auto_l: "automatically layout platform\nwhen new items added",
|
|
op_free_s: "free layout",
|
|
op_free_l: "permit dragable layout\nno effect in laser mode",
|
|
op_spcr_s: "spacing",
|
|
op_spcr_l: "spacing between objects\nduring auto layout\nin workspace units",
|
|
op_invr_s: "invert zoom",
|
|
op_invr_l: "invert mouse wheel\nscroll zoom",
|
|
op_save_s: "auto save",
|
|
op_save_l: "preserve objects in workspace\nbetween application reloads",
|
|
op_line_s: "line type",
|
|
op_line_l: "line style for path rendering\nimpacts 3d performance\npath: 3d best\nflat: 2d good\nline = 1d fast",
|
|
op_unit_s: "units",
|
|
op_unit_l: "workspace units affects\nspeeds and distances",
|
|
op_anim_s: "animate",
|
|
op_anim_l: "animation mesh density\nhigher is more dense\ntakes more memory\nand is slower",
|
|
|
|
lo_menu: "layout",
|
|
|
|
pt_menu: "parts",
|
|
pt_deci_s: "decimate",
|
|
pt_deci_l: "enable or disable point decimation\nduring port import. for faster slicing\nand lower memory usage",
|
|
pt_qual_s: "quality",
|
|
pt_qual_l: "level of detail to retain\nduring slicing operations\nlower is faster",
|
|
|
|
xp_menu: "exports",
|
|
|
|
// SETTINGS
|
|
se_menu: "profile",
|
|
se_load: "load",
|
|
se_save: "save",
|
|
|
|
// FDM SLICING
|
|
sl_menu: "layers",
|
|
sl_lahi_s: "height",
|
|
sl_lahi_l: "height of each slice\nlayer in millimeters",
|
|
ad_minl_s: "height min",
|
|
ad_minl_l: "adaptive min layer height\nin millimeters\nmust be non-zero",
|
|
sl_ltop_s: "top layers",
|
|
sl_ltop_l: "number of solid layers\nto enforce at the\ntop of the print",
|
|
sl_lsld_s: "solid layers",
|
|
sl_lsld_l: "solid fill areas computed\nfrom layer deltas. see\nlayer pop menu",
|
|
sl_lbot_s: "base layers",
|
|
sl_lbot_l: "number of solid layers\nto enforce at the\nbottom of the print",
|
|
ad_adap_s: "adaptive",
|
|
ad_adap_l: "use adaptive layer heights\nwith 'layer height' as max\nand 'layer min' as the min",
|
|
|
|
// FDM SHELLS
|
|
sl_shel_s: "shell count",
|
|
sl_shel_l: "number of perimeter\nwalls to generate",
|
|
sl_ordr_s: "shell order",
|
|
sl_ordr_l: "output shell order\ninside to outside\nor outside to inside\naffects surface quality",
|
|
sl_strt_s: "layer start",
|
|
sl_strt_l: "layer starting point\nlast = last layer end\ncenter = part center\norigin = device origin",
|
|
ad_thin_s: "thin walls",
|
|
ad_thin_l: "detect and fill gaps\nbetween shell walls",
|
|
|
|
// FDM FILL
|
|
fi_menu: "infill",
|
|
fi_type: "type",
|
|
fi_pcnt_s: "fill fraction",
|
|
fi_pcnt_l: "fill density values\n0.0 - 1.0",
|
|
fi_angl_s: "solid start",
|
|
fi_angl_l: "starting angle in degrees\n90 degrees added to \neach following layer\napplies only to solid layers",
|
|
fi_over_s: "overlap",
|
|
fi_over_l: "overlap with shell and other fill\nas fraction of nozzle diameter\n0.0 - 1.0",
|
|
// fi_rate_s: "print speed",
|
|
fi_rate_l: "extrusion speed for infill\nset to 0 to use default\noutput print speeds",
|
|
|
|
// FDM FIRST LAYER
|
|
fl_menu: "base",
|
|
fl_lahi_s: "layer height",
|
|
fl_lahi_l: "height of each slice\nin millimeters\nshould be >= slice height",
|
|
fl_rate_s: "shell speed",
|
|
fl_rate_l: "shell printing max speed\nin millimeters / minute",
|
|
fl_frat_s: "fill speed",
|
|
fl_frat_l: "fill printing max speed\nin millimeters / minute",
|
|
fl_mult_s: "flow factor",
|
|
fl_mult_l: "extrusion multiplier\n0.0 - 2.0",
|
|
fl_sfac_s: "width factor",
|
|
fl_sfac_l: "multiplier on nozzle size\nchanges line spacing",
|
|
fl_skrt_s: "skirt count",
|
|
fl_skrt_l: "number of first-layer offset\nbrims to generate",
|
|
fl_skro_s: "skirt offset",
|
|
fl_skro_l: "skirt offset from part\nin millimeters",
|
|
fl_nozl_s: "nozzle temp",
|
|
fl_nozl_l: "degrees in celsius\noutput setting used\nwhen this is zero",
|
|
fl_bedd_s: "bed temp",
|
|
fl_bedd_l: "degrees in celsius\noutput setting used\nwhen this is zero",
|
|
fr_spac_s: "raft gap",
|
|
fr_spac_l: "additional layer spacing\nbetween 1st layer and raft\nin millimeters",
|
|
fr_nabl_s: "raft enable",
|
|
fr_nabl_l: "create a raft under the\nmodel for better adhesion\nuses skirt offset and\ndisables skirt output",
|
|
|
|
// FDM BELT ONLY
|
|
fl_zoff_s: "layer offset",
|
|
fl_zoff_l: "height offset from belt\nof lowest extrusion\nin millimeters",
|
|
fl_brim_s: "brim size",
|
|
fl_brim_l: "add brim to part bottom\nsize is width in millimeters\n0 to disable",
|
|
fl_brmn_s: "brim trigger",
|
|
fl_brmn_l: "add brims only when segment\nfacing belt is shorter than this\nvalue in millimeters\n0 = Infinity",
|
|
fl_bled_s: "part anchor",
|
|
fl_bled_l: "belt part anchor\nat start of print\nin millimeters",
|
|
|
|
// FDM SUPPORT
|
|
sp_menu: "support",
|
|
sp_detect: "detect",
|
|
sp_dens_s: "density",
|
|
sp_dens_l: "fraction 0.0 - 1.0\nrecommended 0.15\n0 to disable",
|
|
sp_size_s: "pillar size",
|
|
sp_size_l: "pillar width\nin millimeters",
|
|
sp_offs_s: "part offset",
|
|
sp_offs_l: "offset from part\nin millimeters",
|
|
sp_gaps_s: "gap layers",
|
|
sp_gaps_l: "number of layers\noffset from part",
|
|
sp_span_s: "max span",
|
|
sp_span_l: "unsupported span that causes\na new support to be generated\nin millimeters",
|
|
sp_angl_s: "max angle",
|
|
sp_angl_l: "max overhang angle before\nsupporting pillar is generated",
|
|
sp_area_s: "min area",
|
|
sp_area_l: "minimum area for\na support column\nin millimeters",
|
|
sp_xpnd_s: "expand",
|
|
sp_xpnd_l: "expand support area\nbeyond part boundary\nin millimeters",
|
|
sp_nozl_s: "extruder",
|
|
sp_nozl_l: "in multi-extruder systems\nthe extruder to use for\nsupport material",
|
|
sp_auto_s: "automatic",
|
|
sp_auto_l: "enable generated supports\nusing at-slice-time geometry\nsupports will only appear\nafter slicing completes",
|
|
|
|
// LASER SLICING
|
|
ls_offs_s: "offset",
|
|
ls_offs_l: "adjust for beam width\nin millimeters",
|
|
ls_lahi_s: "height",
|
|
ls_lahi_l: "layer height\nin millimeters\n0 = auto/detect",
|
|
ls_lahm_s: "min",
|
|
ls_lahm_l: "layer height minimum\nwill merge auto slices\nunder this thickness\nin millimeters",
|
|
ls_sngl_s: "single",
|
|
ls_sngl_l: "perform only one slice\nat specified layer height",
|
|
|
|
// CNC COMMON terms
|
|
cc_tool: "tool",
|
|
cc_offs_s: "offset",
|
|
cc_offs_l: "offset tool center\nfrom chosen path",
|
|
cc_spnd_s: "spindle rpm",
|
|
cc_spnd_l: "spindle speed in\nrevolutions / minute",
|
|
cc_sovr_s: "step over",
|
|
cc_sovr_l: "as a fraction of\ntool diameter",
|
|
cc_sdwn_s: "step down",
|
|
cc_sdwn_l: "step down depth\nfor each pass\nin workspace units\n0 to disable",
|
|
cc_feed_s: "feed rate",
|
|
cc_feed_l: "max cutting speed in\nworkspace units / minute",
|
|
cc_plng_s: "plunge rate",
|
|
cc_plng_l: "max z axis speed in\nworkspace units / minute",
|
|
|
|
// CNC COMMON
|
|
cc_menu: "limits",
|
|
cc_flip: "flip",
|
|
cc_rapd_s: "xy feed",
|
|
cc_rapd_l: "max xy moves feedrate\nin workspace units / minute",
|
|
cc_rzpd_s: "z feed",
|
|
cc_rzpd_l: "max z moves feedrate\nin workspace units / minute",
|
|
|
|
cc_loff_s: "offset",
|
|
cc_loff_l: "distance from stock face\nfor leveling pass\nin workspace units",
|
|
|
|
// CNC ROUGHING
|
|
cr_menu: "rough",
|
|
cr_lsto_s: "leave stock",
|
|
cr_lsto_l: "horizontal offset from vertical faces\nstock to leave for finishing pass\nin workspace units",
|
|
cr_ease_s: "ease down",
|
|
cr_ease_l: "plunge cuts will\nspiral down or ease\nalong a linear path",
|
|
cr_clrt_s: "clear top",
|
|
cr_clrt_l: "run a clearing pass over\nthe bounding area of the part\nat z = 0",
|
|
cr_clrp_s: "clear voids",
|
|
cr_clrp_l: "mill out through pockets\ninstead of just the outline",
|
|
cr_clrf_s: "clear faces",
|
|
cr_clrf_l: "interpolate step down to\nclear any detected flat areas",
|
|
cr_olin_s: "inside only",
|
|
cr_olin_l: "limit cutting to\ninside part boundaries",
|
|
|
|
// CNC OUTLINE
|
|
co_menu: "outline",
|
|
co_dogb_s: "dogbones",
|
|
co_dogb_l: "insert dogbone cuts\ninto inside corners",
|
|
co_wide_s: "wide cutout",
|
|
co_wide_l: "widen outside cutout paths\nfor deep cuts in hard material",
|
|
co_olin_s: "inside only",
|
|
co_olin_l: "limit cutting to\ninside part boundaries",
|
|
co_olot_s: "outside only",
|
|
co_olot_l: "limit cutting to\nexterior part boundaries\nwhich can be thought of\nas the shadow outline",
|
|
co_omit_s: "omit through",
|
|
co_omit_l: "eliminate thru holes",
|
|
co_olen_s: "enable",
|
|
co_olen_l: "enabled outline cutting",
|
|
|
|
// CNC CONTOUR
|
|
cn_menu: "contour",
|
|
cf_angl_s: "max angle",
|
|
cf_angl_l: "angles greater than this\nare considered vertical",
|
|
cf_curv_s: "curves only",
|
|
cf_curv_l: "limit linear cleanup\nto curved surfaces",
|
|
cf_olin_s: "inside only",
|
|
cf_olin_l: "limit cutting to\ninside part boundaries",
|
|
cf_linx_s: "enable y pass",
|
|
cf_linx_l: "linear y-axis finishing",
|
|
cf_liny_s: "enable x pass",
|
|
cf_liny_l: "linear x-axis finishing",
|
|
|
|
// CNC TRACE
|
|
cu_menu: "trace",
|
|
cu_type_s: "type",
|
|
cu_type_l: "follow = tool tip follows line\nright or left = tool tip\nfollows line offset by tool radius",
|
|
|
|
// CNC DRILLING
|
|
cd_menu: "drill",
|
|
cd_axis: "axis",
|
|
cd_points: "points",
|
|
cd_plpr_s: "plunge per",
|
|
cd_plpr_l: "max plunge between\ndwell periods\nin workspace units\n0 to disable",
|
|
cd_dwll_s: "dwell time",
|
|
cd_dwll_l: "dwell time\nbetween plunges in\nin milliseconds",
|
|
cd_lift_s: "drill lift",
|
|
cd_lift_l: "lift between plunges\nafter dwell period\nin workspace units\n0 to disable",
|
|
cd_regi_s: "register",
|
|
cd_regi_l: "drill registration holes\nfor double-sided parts\nindependent of enable\ndrilling but uses same\ntool and settings",
|
|
|
|
// CNC CUTOUT TABS
|
|
ct_menu: "tabs",
|
|
ct_angl_s: "angle",
|
|
ct_angl_l: "starting angle for tab spacing\nin degrees (0-360)",
|
|
ct_numb_s: "count",
|
|
ct_numb_l: "number of tabs to use\nwill be spaced evenly\naround the part",
|
|
ct_wdth_s: "width",
|
|
ct_wdth_l: "width in workspace units",
|
|
ct_hght_s: "height",
|
|
ct_hght_l: "height in workspace units",
|
|
ct_dpth_s: "depth",
|
|
ct_dpth_l: "distance in workspace units\nthat the tab projects from\nthe part surface",
|
|
ct_midl_s: "midline",
|
|
ct_midl_l: "use midline of tab\ninstead of z bottom\nfor double-sided work",
|
|
ct_nabl_s: "auto",
|
|
ct_nabl_l: "auto generate radial tabs\nprojected from part center\nusing count and angle offset",
|
|
|
|
// OUTPUT
|
|
ou_menu: "output",
|
|
|
|
// LASER KNIFE
|
|
dk_menu: "knife",
|
|
dk_dpth_s: "cut depth",
|
|
dk_dpth_l: "final cut depth\nin millimeters",
|
|
dk_pass_s: "cut passes",
|
|
dk_pass_l: "number of passes\ndown to cut depth",
|
|
dk_offs_s: "tip offset",
|
|
dk_offs_l: "distance from blade tip\nto center of tool\nin millimeters",
|
|
|
|
// OUTPUT LASER
|
|
ou_spac_s: "spacing",
|
|
ou_spac_l: "distance between layer output\nin millimeters",
|
|
ou_scal_s: "scaling",
|
|
ou_scal_l: "multiplier (0.1 to 100)",
|
|
ou_powr_s: "power",
|
|
ou_powr_l: "0 - 100\nrepresents %",
|
|
ou_sped_s: "speed",
|
|
ou_sped_l: "millimeters / minute",
|
|
ou_mrgd_s: "merged",
|
|
ou_mrgd_l: "merge all layers using\ncolor coding to denote\nstacking depth",
|
|
ou_grpd_s: "grouped",
|
|
ou_grpd_l: "retain each layer as\na unified grouping\ninstead of separated\npolygons",
|
|
ou_layr_s: "layer order",
|
|
ou_layr_l: "output layer order\nfrom top right to\nbottom left",
|
|
ou_layo_s: "layer color",
|
|
ou_layo_l: "output layer colors\nfor each z index\noverridden by merged",
|
|
ou_drkn_s: "drag knife",
|
|
ou_drkn_l: "enable drag knife\noutput in gcode\ncut radii are added\nto corners with\ncut down passes",
|
|
|
|
// OUTPUT FDM
|
|
ou_nozl_s: "nozzle temp",
|
|
ou_nozl_l: "degrees in celsius",
|
|
ou_bedd_s: "bed temp",
|
|
ou_bedd_l: "degrees in celsius",
|
|
ou_feed_s: "print speed",
|
|
ou_feed_l: "max print speed\nmillimeters / minute",
|
|
ou_fini_s: "finish speed",
|
|
ou_fini_l: "outermost shell speed\nmillimeters / minute",
|
|
ou_move_s: "move speed",
|
|
ou_move_l: "non-print move speed\nmillimeters / minute\n0 = enable G0 moves",
|
|
ou_shml_s: "shell factor",
|
|
ou_flml_s: "solid factor",
|
|
ou_spml_s: "infill factor",
|
|
ou_exml_l: "extrusion multiplier\n0.0 - 2.0",
|
|
ou_fans_s: "fan speed",
|
|
ou_fans_l: "0 - 255",
|
|
|
|
// OUTPUT CAM
|
|
ou_toll_s: "tolerance",
|
|
ou_toll_l: "surface precision\nin workspace units\nlower is slower and\nuses more memory\n0 = automatic based\non animate preference",
|
|
ou_zanc_s: "z anchor",
|
|
ou_zanc_l: "controls the position of the part\nwhen stock Z exceeds part Z",
|
|
ou_ztof_s: "z offset",
|
|
ou_ztof_l: "offset z anchor\nin workspace units\nhas no effect when\nanchor is middle",
|
|
ou_zbot_s: "z bottom",
|
|
ou_zbot_l: "offset from part bottom\nto limit cutting depth\nin workspace units",
|
|
ou_zclr_s: "z clearance",
|
|
ou_zclr_l: "safe travel offset\nfrom top of part\nin workspace units",
|
|
ou_ztru_s: "z thru",
|
|
ou_ztru_l: "extend cutout pass down\nin workspace units",
|
|
ou_conv_s: "conventional",
|
|
ou_conv_l: "milling direction\nuncheck for 'climb'",
|
|
ou_depf_s: "depth first",
|
|
ou_depf_l: "optimize pocket cuts\nwith depth priority",
|
|
|
|
// CAM STOCK
|
|
cs_menu: "stock",
|
|
cs_wdth_s: "width",
|
|
cs_wdth_l: "width (x) in workspace units\n0 defaults to part size",
|
|
cs_dpth_s: "depth",
|
|
cs_dpth_l: "depth (y) in workspace units\n0 defaults to part size",
|
|
cs_hght_s: "height",
|
|
cs_hght_l: "height (z) in workspace units\n0 defaults to part size",
|
|
cs_offs_s: "offset",
|
|
cs_offs_l: "use width, depth, height\nas offsets from max\npart size on platform",
|
|
cs_clip_s: "clip to",
|
|
cs_clip_l: "rough and outline\nclip cutting paths\nto defined stock",
|
|
cs_offe_s: "enable",
|
|
cs_offe_l: "enable milling stock",
|
|
|
|
// ORIGIN (CAM & LASER)
|
|
or_bnds_s: "origin bounds",
|
|
or_bnds_l: "origin is relative to\nboundary of all objects",
|
|
or_cntr_s: "origin center",
|
|
or_cntr_l: "origin is referenced from the center",
|
|
or_topp_s: "origin top",
|
|
or_topp_l: "origin is references from the top of objects",
|
|
|
|
// FDM ADVANCED
|
|
ad_menu: "expert",
|
|
ad_rdst_s: "retract dist",
|
|
ad_rdst_l: "amount to retract filament\nfor long moves. in millimeters",
|
|
ad_rrat_s: "retract rate",
|
|
ad_rrat_l: "speed of filament\nretraction in mm/s",
|
|
ad_rdwl_s: "engage dwell",
|
|
ad_wpln_s: "retract wipe",
|
|
ad_wpln_l: "non-printing move\nafter retraction\nin millimeters",
|
|
ad_rdwl_l: "time between re-engaging\nfilament and movement\nin milliseconds",
|
|
ad_scst_s: "shell coast",
|
|
ad_scst_l: "non-printing end\nof perimeter shells\nin millimeters",
|
|
ad_msol_s: "min solid",
|
|
ad_msol_l: "minimum area (mm^2)\nrequired to keep solid\nmust be > 0.1",
|
|
ad_mins_s: "min speed",
|
|
ad_mins_l: "minimum speed\nfor short segments",
|
|
ad_spol_s: "short path",
|
|
ad_spol_l: "polygons shorter than this\nwill have their print speed\nscaled down to min speed\nin millimeters",
|
|
ad_arct_s: "arc tolerance",
|
|
ad_arct_l: "convert faceted lines to arcs\ncenter point drift tolerance\nwhen matching arc points\nconsider values around 0.15\nin millimeters\n0 to disable",
|
|
ad_zhop_s: "z hop dist",
|
|
ad_zhop_l: "amount to raise z\non retraction moves\nin millimeters\n0 to disable",
|
|
ad_abkl_s: "anti-backlash",
|
|
ad_abkl_l: "for better flat surface finish\nuse micro-movements to cancel\nbacklash in solid layer output\nin millimeters\n0 to disable\nif your firmware has M425\nput that in the gcode header\nand leave this as 0",
|
|
ad_lret_s: "layer retract",
|
|
ad_lret_l: "force filament retraction\nbetween layers",
|
|
ad_play_s: "polish layers",
|
|
ad_play_l: "polish up to specified\n# of layers at a time",
|
|
ad_pspd_s: "polish speed",
|
|
ad_pspd_l: "polishing speed\nin millimeters / minute",
|
|
|
|
// CAM EXPERT
|
|
cx_fast_s: "skip shadow",
|
|
cx_fast_l: "disable overhang detection\ncan be faster and use less\nmemory with complex models\nbut fails with overhangs\ntry enabling if slicing\nhangs during shadowing",
|
|
|
|
// FDM GCODE
|
|
ag_menu: "gcode",
|
|
ag_nozl_s: "nozzle",
|
|
ag_nozl_l: "select output nozzle or head",
|
|
ag_paws_s: "pause layers",
|
|
ag_paws_l: "comma-separated list of layers\nto inject pause commands before",
|
|
ag_loop_s: "loop layers",
|
|
ag_loop_l: "layer ranges to repeat in the format\nfirst-last-count,first-last-count,...\nomitted count = 1",
|
|
|
|
// SLA MENU
|
|
sa_menu: "slicing",
|
|
sa_lahe_s: "layer height",
|
|
sa_lahe_l: "layer height\nin millimeters",
|
|
sa_shel_s: "hollow shell",
|
|
sa_shel_l: "shell thickness in mm\nuse multiple of layer height\nuse 0 for solid (disabled)",
|
|
sa_otop_s: "open top",
|
|
sa_otop_l: "if shell is enabled\nresults in an open top",
|
|
sa_obas_s: "open base",
|
|
sa_obas_l: "if shell is enabled\nresults in an open base\ndisabled with supports",
|
|
|
|
sa_layr_m: "layers",
|
|
sa_lton_s: "light on time",
|
|
sa_lton_l: "layer light on\ntime in seconds",
|
|
sa_ltof_s: "light off time",
|
|
sa_ltof_l: "layer light off\ntime in seconds",
|
|
sa_pldi_s: "peel distance",
|
|
sa_pldi_l: "peel distance\nin millimeters",
|
|
sa_pllr_s: "peel lift rate",
|
|
sa_pllr_l: "peel lift speed\nin mm/sec",
|
|
sa_pldr_s: "peel drop rate",
|
|
sa_pldr_l: "peel drop speed\nin mm/sec",
|
|
|
|
sa_base_m: "base",
|
|
sa_balc_s: "layer count",
|
|
sa_balc_l: "number of\nbase layers",
|
|
sa_bltn_l: "base layer light on\ntime in seconds",
|
|
sa_bltf_l: "base layer light off\ntime in seconds",
|
|
|
|
sa_infl_m: "infill",
|
|
sa_ifdn_s: "density",
|
|
sa_ifdn_l: "percent infill\nrequires shell\n0 = disabled\nvalid 0.0 - 1.0",
|
|
sa_iflw_s: "line width",
|
|
sa_iflw_l: "hatch line width\nin millimeters",
|
|
|
|
sa_supp_m: "support",
|
|
sa_slyr_s: "base layers",
|
|
sa_slyr_l: "base support layers\nvalue range 0-10",
|
|
sa_slgp_s: "gap layers",
|
|
sa_slgp_l: "number of layers between\nraft and bottom of object",
|
|
sa_sldn_s: "density",
|
|
sa_sldn_l: "used to compute the\nnumber of support pillars\n0.0-1.0 (0 = disable)",
|
|
sa_slsz_s: "size",
|
|
sa_slsz_l: "max size of a\nsupport pillar\nin millimeters",
|
|
sa_slpt_s: "points",
|
|
sa_slpt_l: "number of points in\neach support pillar\nin millimeters",
|
|
sl_slen_l: "enable supports",
|
|
|
|
sa_outp_m: "output",
|
|
sa_opzo_s: "z offset",
|
|
sa_opzo_l: "z layer offset\nalmost always 0.0\n0.0-1.0 in millimeters",
|
|
sa_opaa_s: "anti alias",
|
|
sa_opaa_l: "enable anti-aliasing\nproduces larger files\ncan blur details"
|
|
};
|