{
    "pre":[
        "M83 ; extruder relative mode",
        "M104 S160 ; set extruder to a temporary high enough temp",
        "M140 S{bed_temp} ; set bed temp",
        "M190 S{bed_temp} ; wait for bed temp",
        "M109 S160 ; wait for extruder temporary high enough temp",
        "G28 W ; home all without mesh bed level",
        "G80 ; mesh bed leveling",
        "G90 ; set absolute positioning mode",
        "M83 ; set relative positioning for extruder",
        "G1 Y-3.0 F1000.0 ; go outside print area",
        "M104 S{temp} ; set extruder actual required temp",
        "M109 S{temp} ; wait for extruder actual required temp",
        "G1 X60.0 E9.0  F1000.0 ; intro line",
        "G1 X100.0 E12.5  F1000.0 ; intro line",
        "M900 K{kfactor} ; set Linear Advance factor, see https://www.prusaprinters.org/fw-3-1-0-linear-advance-drivers-1-9-1/"
    ],
    "post":[
        "G4 ; wait",
        "M104 S0 ; turn off temperature",
        "M140 S0 ; turn off heatbed",
        "M107 ; turn off fan",
        "G1 X0 Y200; home X axis",
        "G1 E-1 F900",
        "M84 ; disable motors"
    ],
    "cmd":{
        "fan_power": "M106 S{fan_speed}"
    },
    "settings":{
        "origin_center": false,
        "bed_width": 250,
        "bed_depth": 210,
        "build_height": 210
    }
}