{
    "pre":[
        ";---------------------------------------",
        "; ; ; Jellybox Start Script Begin ; ; ;",
        ";_______________________________________",
        "; for slicer: Kiri",
        "; start gcode last modified Mar 28, 2019",
        "G21               ;metric values",
        "G90               ;absolute positioning",
        "M107              ;start with the fan off",
        "M117 Preparing    ;write Preparing",
        "M190 S45          ;wait for the bed to reach 45C",
        "M109 S180         ;wait for the extruder to reach 180C",
        "G28               ;home all axes",
        "G29 O             ;auto bed leveling procedure only if leveling NOT active",
        ";M500              ;optionally save the mesh",
        "G28 X             ;home x to get as far from the plate as possible",
        "M420 S1           ;(re) enable bed leveling if turned off by the G28",
        "G0 Y0 F5000       ;position Y in front",
        "G0 Z15 F3000      ;position Z",
        "M190 S{bed_temp} T{tool}              ;wait for the bed to reach desired temperature",
        "M109 S{temp} T{tool}             ;wait for the extruder to reach desired temperature",
        "; M300 S440 P300    ;play a tone",
        "G4 P200           ;pause",
        "; M0 Click to start print ; optional, recommended only with a rotary encoder",
        "M117 Print starting   ;write Print starting",
        ";================ ;PRINT:LINE start",
        "G90               ;absolute positioning",
        "M83               ;relative extrusion mode",
        "G0 Z0             ;get Z down",
        "G1 E18 F500       ;extrude __mm of feed stock",
        "G1 E16 F400       ;extrude __mm of feed stock",
        "G1 E8 F400       ;extrude __mm of feed stock",
        "G4 S2             ;pause for ooze",
        "M400              ;make sure all is finished",
        "G0 F500 X3 Y0 Z0.6;get to the start of the LINE",
        "G1 E2 F300        ;extrude __mm of feed stock",
        "G1 F1000 X104 E10 ;print a thick LINE extruding __mm along the way",
        "G92 E0            ;reset the extruder position",
        ";---------------------------------------------",
        "; ; ; Jellybox Printer Start Script End ; ; ;",
        ";_____________________________________________"
    ],
    "post":[
        ";---------------------------------",
        ";;; Jellybox End Script Begin ;;;",
        ";_________________________________",
        "; end gcode last modified Nov 30, 2018",
        "M117 Finishing Up ;write Finishing Up",
        "M107        ;turn the fan off",
        "M104 S0     ;extruder heater off",
        "M140 S0     ;bed heater off (if you have it)",
        "G91         ;relative positioning (includes extruder)",
        "G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
        "G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
        "G1 E-25 F2500 ;retract even more",
        "G90         ;absolute positioning (includes extruder)",
        "G28 X       ;home X so the head is out of the way",
        "G1 Y140     ;move Y forward, so the print is more accessible",
        "M84         ;steppers off",
        "M117 Print finished ;write Print finished",
        ";---------------------------------------",
        ";;; Jellybox End Script End ;;;",
        ";_______________________________________"
    ],
    "cmd":{
        "fan_power": "M106 S{fan_speed}"
    },
    "settings":{
        "origin_center": false,
        "bed_width": 177,
        "bed_depth": 155,
        "build_height": 140
    }
}