{
    "new": false,
    "mode": "FDM",
    "deviceName": "Prusa mini",
    "imageURL": "",
    "internal": 0,
    "bedWidth": 180,
    "bedDepth": 180,
    "bedHeight": 2.5,
    "bedRound": false,
    "bedBelt": false,
    "fwRetract": false,
    "filamentSource": "direct",
    "originCenter": false,
    "deviceZMax": 0,
    "maxHeight": 180,
    "gcodePre": [
        "G90                 ; use absolute coordinates",
        "M83                 ; extruder relative mode",
        "M104 S170           ; set extruder temp for bed leveling",
        "M140 S{bed_temp}    ; set bed temp",
        "M109 R170           ; wait for bed leveling temp",
        "M190 S{bed_temp}    ; wait for bed temp",
        "G28                 ; home all without mesh bed level",
        "G29                 ; mesh bed leveling ",
        "M104 S{temp}        ; set extruder temp",
        "G92 E0.0",
        "G1 Y-2.0 X179 F2400",
        "G1 Z3 F720",
        "M109 S{temp}        ; wait for extruder temp",
        "                    ; intro line",
        "G1 X170 F1000       ; purge line",
        "G1 Z0.2 F720        ; purge line",
        "G1 X110.0 E8.0 F900 ; purge line",
        "G1 X40.0 E10.0 F700 ; purge line",
        "G92 E0.0",
        "M221 S95            ; set flow"
    ],
    "gcodePost": [
        "G1 E-1 F2100              ; retract",
        "G1 Z178 Y178 F4200        ; park print head",
        "G4                        ; wait",
        "M104 S0                   ; turn off temperature",
        "M140 S0                   ; turn off heatbed",
        "M107                      ; turn off fan",
        "M221 S100                 ; reset flow",
        "M900 K0                   ; reset LA",
        "M84                       ; disable motors"
    ],
    "gcodeProc": "",
    "gcodeFan": [],
    "gcodeTrack": [],
    "gcodeLayer": [
        ";AFTER_LAYER_CHANGE",
        ";[layer_z]"
    ],
    "gcodeFExt": null,
    "extruders": [
        {
            "extFilament": 1.75,
            "extNozzle": 0.4,
            "extOffsetX": 0,
            "extOffsetY": 0
        }
    ],
    "extras": {
        "palette": {
            "printer": "d13ef1ba370f",
            "ping": null,
            "feed": null,
            "push": null,
            "offset": null,
            "heat": null,
            "cool": null,
            "press": null
        }
    },
    "profiles": [
        {
            "processName": "Prusa Mini 0.20mm",
            "sliceHeight": 0.2,
            "sliceShells": 2,
            "sliceShellOrder": "in-out",
            "sliceLayerStart": "last",
            "sliceLineWidth": 0.45,
            "sliceFillGrow": 0,
            "sliceFillAngle": 45,
            "sliceFillWidth": 1,
            "sliceFillOverlap": 0.4,
            "sliceFillSparse": 0.2,
            "sliceFillRepeat": 1,
            "sliceFillRate": 0,
            "sliceSolidRate": 0,
            "sliceFillType": "hex",
            "sliceSupportDensity": 0.25,
            "sliceSupportOffset": 1,
            "sliceSupportGap": 1,
            "sliceSupportSize": 5,
            "sliceSupportArea": 0.1,
            "sliceSupportSpan": 5,
            "sliceSupportExtra": 0,
            "sliceSupportAngle": 50,
            "sliceSupportNozzle": 0,
            "sliceSupportEnable": true,
            "sliceSupportOutline": true,
            "sliceSolidMinArea": 1,
            "sliceSolidLayers": 3,
            "sliceBottomLayers": 4,
            "sliceTopLayers": 5,
            "firstSliceHeight": 0.2,
            "firstLayerRate": 8,
            "firstLayerFillRate": 35,
            "firstLayerPrintMult": 1,
            "firstLayerLineMult": 2,
            "firstLayerYOffset": 0,
            "firstLayerNozzleTemp": 215,
            "firstLayerBedTemp": 60,
            "firstLayerBrim": 0,
            "firstLayerBrimIn": 0,
            "firstLayerBrimTrig": 0,
            "firstLayerBrimGap": 0,
            "firstLayerBeltLead": 3,
            "firstLayerBeltBump": 0,
            "firstLayerFanSpeed": 0,
            "firstLayerFlatten": 0,
            "outputRaft": false,
            "outputRaftSpacing": 0.2,
            "outputDraftShield": false,
            "outputTemp": 215,
            "outputBedTemp": 60,
            "outputFeedrate": 40,
            "outputFinishrate": 50,
            "outputSeekrate": 150,
            "outputShellMult": 1.25,
            "outputFillMult": 1.25,
            "outputSparseMult": 1.25,
            "outputFanSpeed": 255,
            "outputRetractDist": 3.2,
            "outputRetractSpeed": 70,
            "outputRetractWipe": 0,
            "outputRetractDwell": 20,
            "outputBrimCount": 2,
            "outputBrimOffset": 2,
            "outputShortPoly": 100,
            "outputMinSpeed": 10,
            "outputCoastDist": 0,
            "outputPurgeTower": 0,
            "outputBeltFirst": false,
            "outputAvoidGaps": true,
            "outputLayerRetract": false,
            "outputLoops": 0,
            "outputInvertX": false,
            "outputInvertY": false,
            "sliceDetectThin": "off",
            "sliceMinHeight": 0,
            "sliceAdaptive": false,
            "zHopDistance": 0.2,
            "arcTolerance": 0,
            "antiBacklash": 1,
            "ranges": [],
            "beltAnchor": 3
        }
    ]
}