{
    "new": false,
    "mode": "FDM",
    "deviceName":"Creality.Ender.3",
    "noclone": false,
    "internal": 0,
    "imageURL": "",
    "imageScale": 0.75,
    "imageAnchor": 0,
    "bedHeight": 2.5,
    "bedWidth": 220,
    "bedDepth": 220,
    "bedRound": false,
    "bedBelt": false,
    "maxHeight": 300,
    "originCenter": false,
    "extrudeAbs": true,
    "spindleMax": 0,
    "gcodeFan": ["M106 S{fan_speed}"],
    "gcodeTrack": [],
    "gcodeLayer": [],
    "gcodePre":[
        "M107                     ; turn off filament cooling fan",
        "G90                      ; set absolute positioning mode",
        "M82                      ; set absolute positioning for extruder",
        "M104 S{temp} T{tool}     ; set extruder temperature",
        "M140 S{bed_temp} T{tool} ; set bed temperature",
        "G28                      ; home axes",
        "G92 X0 Y0 Z0 E0          ; reset all axes positions",
        "G1 X0 Y0 Z0.25 F180      ; move XY to 0,0 and Z 0.25mm over bed",
        "G92 E0                   ; zero the extruded",
        "M190 S{bed_temp} T{tool} ; wait for bed to reach target temp",
        "M109 S{temp} T{tool}     ; wait for extruder to reach target temp",
        "G92 E0                   ; zero the extruded",
        "G1 F225                  ; set feed speed"
        ],
        "gcodePost":[
        "M107                     ; turn off filament cooling fan",
        "M104 S0 T{tool}          ; turn off right extruder",
        "M140 S0 T{tool}          ; turn off bed",
        "G1 X0 Y300 F1200         ; end move",
        "M84                      ; disable stepper motors"
    ],
    "gcodeProc": "",
    "gcodePause": [],
    "gcodeDwell": [],
    "gcodeSpindle": [],
    "gcodeChange": [],
    "gcodeFExt": "gcode",
    "gcodeSpace": true,
    "gcodeStrip": false,
    "gcodeLaserOn": [],
    "gcodeLaserOff":[],
    "extruders":[ {
        "extFilament":1.75,
        "extNozzle":0.4,
        "extSelect":[ "T0" ],
        "extDeselect":[],
        "extOffsetX":0,
        "extOffsetY":0
    } ],
}