{ "deviceName": "IMADE3D JellyBOX 2 N0.4", "bedWidth": 177, "bedDepth": 155, "maxHeight": 140, "mode": "FDM", "new": false, "internal": 0, "imageURL": "", "bedHeight": 2.5, "bedRound": false, "bedBelt": false, "deviceZMax": 0, "originCenter": false, "gcodeFan": [ "M106 S{fan_speed}" ], "gcodeTrack": [ "M117 {progress}% layer {layer} / {layers}" ], "gcodeLayer": [ ";; --- layer {layer} {height} @ {z} ---", "M117 {progress}% layer {layer} / {layers}" ], "gcodePre": [ ";============================", "; Jellybox Start Script Begin ", ";============================", "; for slicer: Kiri:Moto", "; modified 2024-02-01. by LG", ";", "G21 ;metric values", "G90 ;absolute positioning", "M107 ;start with the fan off", ";", "; === Homing and bed leveling (if necessary)", ";", "G28 ;home all axes", "G29 O ;auto bed leveling procedure only if leveling NOT active", ";M500 ;optionally save the mesh", "G28 X ;home x to get as far from the plate as possible", "M420 S1 ;(re) enable bed leveling if turned off by the G28", "G0 Y0 F5000 ;position Y in front", "G0 Z5 F3000 ;position Z", "M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature", "M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature", "; ", "; === Purge 30mm of the filament", ";", "G90 ;absolute positioning", "M400 ;make sure all is finished", "G92 E0 ;to reset extruder position to 0 after finished previous print", "G1 E30 F200 ;extrude 30mm of feed stock", "G92 E0 ;reset the extruder position Z is 0 again.", ";", ";===================================", "; Jellybox Printer Start Script End", ";===================================" ], "gcodePost": [ ";---------------------------------", ";;; Jellybox End Script Begin ;;;", ";_________________________________", "; end gcode last modified 2022-01-13", "M117 Finishing Up ;write Finishing Up", "M107 ;turn the fan off", "M104 S0 ;extruder heater off", "M140 S0 ;bed heater off (if you have it)", "G91 ;relative positioning (includes extruder)", "G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure", "G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more", "G1 E-25 F2000 ;retract even more", "G90 ;absolute positioning (includes extruder)", "G28 X ;home X so the head is out of the way", "G1 Y140 ;move Y forward, so the print is more accessible", "M84 ;steppers off", "M117 Print finished ;write Print finished", ";---------------------------------------", ";;; Jellybox End Script End ;;;", ";_______________________________________" ], "gcodeProc": "", "gcodeFExt": "gcode", "extruders": [ { "extFilament": 1.75, "extNozzle": 0.4, "extSelect": [ "T0" ], "extDeselect": [], "extOffsetX": 0, "extOffsetY": 0 } ], "fwRetract": false, "profiles": [ { "processName": "JB2 PLA - N0.4 L0.3 T210", "sliceHeight": 0.3, "sliceShells": 2, "sliceShellOrder": "in-out", "sliceLayerStart": "last", "sliceFillAngle": 45, "sliceFillWidth": 1, "sliceFillOverlap": 0.25, "sliceFillSparse": 0.1, "sliceFillType": "hex", "sliceAdaptive": false, "sliceMinHeight": 0, "sliceSupportDensity": 0.25, "sliceSupportOffset": 0.6, "sliceSupportGap": 1, "sliceSupportSize": 6, "sliceSupportArea": 3, "sliceSupportExtra": 0, "sliceSupportAngle": 50, "sliceSupportNozzle": 0, "sliceSolidMinArea": 1, "sliceBottomLayers": 3, "sliceTopLayers": 3, "firstLayerNozzleTemp": 215, "firstLayerBedTemp": 60, "firstLayerRate": 20, "firstLayerFillRate": 25, "firstLayerPrintMult": 1.2, "firstLayerLineMult": 1, "firstLayerFanSpeed": 0, "outputRaft": false, "outputRaftSpacing": 0.2, "outputTemp": 210, "outputBedTemp": 60, "outputFanSpeed": 130, "outputFeedrate": 45, "outputFinishrate": 20, "outputSeekrate": 80, "outputShellMult": 1.05, "outputFillMult": 1.05, "outputSparseMult": 1.2, "outputBrimCount": 5, "outputBrimOffset": 5, "outputRetractDist": 1.8, "outputRetractSpeed": 40, "outputRetractWipe": 0.8, "outputRetractDwell": 10, "outputShortPoly": 50, "outputMinSpeed": 10, "outputCoastDist": 0.4, "outputLayerRetract": true, "zHopDistance": 0.2, "antiBacklash": 0, "outputOriginCenter": false, "sliceLineWidth": 0.45, "sliceFillRepeat": 1, "sliceFillRate": 0, "sliceSupportSpan": 5, "sliceSupportEnable": false, "sliceSupportOutline": true, "firstSliceHeight": 0.2, "firstLayerYOffset": 0, "firstLayerBrim": 0, "firstLayerBrimIn": 0, "firstLayerBrimTrig": 0, "firstLayerBrimGap": 0, "firstLayerBeltLead": 3, "firstLayerBeltBump": 0, "firstLayerFlatten": 0, "outputPurgeTower": 0, "outputBeltFirst": false, "outputLoops": 0, "outputInvertX": false, "outputInvertY": false, "arcTolerance": 0.15, "ranges": [], "outputDraftShield": false, "outputAvoidGaps": true, "sliceFillGrow": 0, "sliceSolidRate": 0, "sliceDetectThin": "off", "sliceLayerStartX": 0, "sliceLayerStartY": 0, "sliceSupportGrow": 0, "outputAlternating": false }, { "processName": "JB2 PETG - N0.4 L0.3 T235", "sliceHeight": 0.3, "sliceShells": 2, "sliceShellOrder": "in-out", "sliceLayerStart": "last", "sliceFillAngle": 45, "sliceFillWidth": 1, "sliceFillOverlap": 0.25, "sliceFillSparse": 0.1, "sliceFillType": "hex", "sliceAdaptive": false, "sliceMinHeight": 0, "sliceSupportDensity": 0.25, "sliceSupportOffset": 0.6, "sliceSupportGap": 1, "sliceSupportSize": 6, "sliceSupportArea": 3, "sliceSupportExtra": 0, "sliceSupportAngle": 50, "sliceSupportNozzle": 0, "sliceSolidMinArea": 1, "sliceBottomLayers": 3, "sliceTopLayers": 3, "firstLayerNozzleTemp": 235, "firstLayerBedTemp": 70, "firstLayerRate": 20, "firstLayerFillRate": 25, "firstLayerPrintMult": 1.2, "firstLayerLineMult": 1, "firstLayerFanSpeed": 0, "outputRaft": false, "outputRaftSpacing": 0.2, "outputTemp": 235, "outputBedTemp": 70, "outputFanSpeed": 75, "outputFeedrate": 45, "outputFinishrate": 20, "outputSeekrate": 80, "outputShellMult": 1.05, "outputFillMult": 1.05, "outputSparseMult": 1.2, "outputBrimCount": 5, "outputBrimOffset": 5, "outputRetractDist": 2, "outputRetractSpeed": 40, "outputRetractWipe": 0.8, "outputRetractDwell": 10, "outputShortPoly": 50, "outputMinSpeed": 10, "outputCoastDist": 0.4, "outputLayerRetract": true, "zHopDistance": 0.2, "antiBacklash": 0, "outputOriginCenter": false, "sliceLineWidth": 0.45, "sliceFillRepeat": 1, "sliceFillRate": 0, "sliceSupportSpan": 5, "sliceSupportEnable": false, "sliceSupportOutline": true, "firstSliceHeight": 0.2, "firstLayerYOffset": 0, "firstLayerBrim": 0, "firstLayerBrimIn": 0, "firstLayerBrimTrig": 0, "firstLayerBrimGap": 0, "firstLayerBeltLead": 3, "firstLayerBeltBump": 0, "firstLayerFlatten": 0, "outputPurgeTower": 0, "outputBeltFirst": false, "outputLoops": 0, "outputInvertX": false, "outputInvertY": false, "arcTolerance": 0.15, "ranges": [], "outputDraftShield": false, "outputAvoidGaps": true, "sliceFillGrow": 0, "sliceSolidRate": 0, "sliceDetectThin": "off", "sliceLayerStartX": 0, "sliceLayerStartY": 0, "sliceSupportGrow": 0, "outputAlternating": false }, { "processName": "JB2 FLEX - N0.4 L0.3 T235", "sliceHeight": 0.3, "sliceShells": 2, "sliceShellOrder": "in-out", "sliceLayerStart": "last", "sliceFillAngle": 45, "sliceFillWidth": 1, "sliceFillOverlap": 0.25, "sliceFillSparse": 0.1, "sliceFillType": "hex", "sliceAdaptive": false, "sliceMinHeight": 0, "sliceSupportDensity": 0.25, "sliceSupportOffset": 0.6, "sliceSupportGap": 1, "sliceSupportSize": 6, "sliceSupportArea": 3, "sliceSupportExtra": 0, "sliceSupportAngle": 50, "sliceSupportNozzle": 0, "sliceSolidMinArea": 1, "sliceBottomLayers": 3, "sliceTopLayers": 3, "firstLayerNozzleTemp": 238, "firstLayerBedTemp": 55, "firstLayerRate": 10, "firstLayerFillRate": 10, "firstLayerPrintMult": 1.2, "firstLayerLineMult": 1, "firstLayerFanSpeed": 0, "outputRaft": false, "outputRaftSpacing": 0.2, "outputTemp": 235, "outputBedTemp": 55, "outputFanSpeed": 75, "outputFeedrate": 15, "outputFinishrate": 10, "outputSeekrate": 80, "outputShellMult": 1.2, "outputFillMult": 1.2, "outputSparseMult": 1.4, "outputBrimCount": 5, "outputBrimOffset": 5, "outputRetractDist": 0.5, "outputRetractSpeed": 20, "outputRetractWipe": 0.8, "outputRetractDwell": 10, "outputShortPoly": 50, "outputMinSpeed": 10, "outputCoastDist": 0.4, "outputLayerRetract": true, "zHopDistance": 1, "antiBacklash": 0, "outputOriginCenter": false, "sliceLineWidth": 0.45, "sliceFillRepeat": 1, "sliceFillRate": 15, "sliceSupportSpan": 5, "sliceSupportEnable": false, "sliceSupportOutline": true, "firstSliceHeight": 0.2, "firstLayerYOffset": 0, "firstLayerBrim": 0, "firstLayerBrimIn": 0, "firstLayerBrimTrig": 0, "firstLayerBrimGap": 0, "firstLayerBeltLead": 3, "firstLayerBeltBump": 0, "firstLayerFlatten": 0, "outputPurgeTower": 0, "outputBeltFirst": false, "outputLoops": 0, "outputInvertX": false, "outputInvertY": false, "arcTolerance": 0.15, "ranges": [], "outputDraftShield": false, "outputAvoidGaps": true, "sliceFillGrow": 0, "sliceSolidRate": 10, "sliceDetectThin": "off", "sliceLayerStartX": 0, "sliceLayerStartY": 0, "sliceSupportGrow": 0, "outputAlternating": false } ], "filamentSource": "direct", "gcodeTime": 1, "gcodeFeature": [], "extras": { "palette": { "printer": "e888752465a2", "ping": null, "feed": null, "push": null, "offset": null, "heat": null, "cool": null, "press": null } } }