{
    "mode": "FDM",
    "internal": 0,
    "bedHeight": 2.5,
    "bedWidth": 200,
    "bedDepth": 200,
    "bedRound": false,
    "bedBelt": false,
    "maxHeight": 250,
    "originCenter": false,
    "gcodeFan": [
        "M106 S{fan_speed}"
    ],
    "gcodeTrack": [
        "M117 {progress}% layer {layer} / {layers}"
    ],
    "gcodeLayer": [],
    "gcodePre": [
        "M201 X2500 Y2500 Z800 E2500  ; sets maximum accelerations, mm/sec^2",
        "M203 X250 Y250 Z8 E80        ; sets maximum feedrates, mm / sec",
        "M204 P2500 R2500 T2500       ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2",
        "M205 X8.00 Y8.00 Z0.40 E8.00 ; sets the jerk limits, mm/sec",
        "M205 S0 T0                   ; sets the minimum extruding and travel feed rate, mm/sec",
        "M107                         ; fan off",
        "M190 S{bed_temp}             ; set bed temperature and wait for it to be reached",
        "M104 S{temp}                 ; set temperature",
        "M109 S{temp}                 ; set temperature and wait for it to be reached",
        "G21                          ; set units to millimeters",
        "G90                          ; use absolute coordinates",
        "M82                          ; use absolute distances for extrusion",
        "G92 E0",
        "G28                          ; home all axes\\nG1 Z5 F5000 ; lift nozzle\\n",
        "G1 Z0.24                     ; lift nozzle a bit ",
        "G92 E0                       ; zero the extruded length ",
        "G1 X5 Y0  F3000",
        "G1 X50 Y0  E60 F500          ; Extrude 25mm of filament in a 5cm line. ",
        "G92 E0                       ; zero the extruded length again ",
        "G1 E-4.5 F4800               ; Retract a little ",
        "G92 E0",
        "G1 X120 F4000                ; Quickly wipe away from the filament line`"
    ],
    "gcodePost": [
        "M104 S0                          ; Extruder off ",
        "M140 S0                          ; Heatbed off ",
        "M107                             ; Fan off ",
        "G91                              ; relative positioning ",
        "G1 E-2 F3000  ",
        "G1 Z+0.3 F3000                   ; lift print head ",
        "G28 X0  F3000",
        "M84                              ; disable stepper motors",
        "M117 Cooling down...",
        "M104 S0                          ; turn off extruder",
        "M107                             ; Fan off",
        "M84                              ; disable motors",
        "G91                              ; relative positioning",
        "G1 E-1 F300                      ; retract the filament a bit before lifting the nozzle, to release some of the pressure",
        "G1 Z+0.5 E-5 ;X-20 Y-20 F240     ; move Z up a bit and retract filament even more",
        "G28 X0                           ; move X to min endstops, so the head is out of the way",
        "G90                              ; Absolute positionning",
        "G1 Y200 F3000                    ; Present print",
        "M84                              ; steppers off",
        "M300 P300 S4000",
        "M117 Finished."
    ],
    "gcodeProc": "",
    "gcodeFExt": "gcode",
    "extruders": [
        {
            "extFilament": 1.75,
            "extNozzle": 0.4,
            "extOffsetX": 0,
            "extOffsetY": 0
        }
    ],
    "deviceName": "Anycubic Kobra 2",
    "fwRetract": false,
    "extras": {
        "palette": {
            "printer": "6c99ea036da",
            "ping": null,
            "feed": null,
            "push": null,
            "offset": null,
            "heat": null,
            "cool": null,
            "press": null
        }
    },
    "new": false,
    "imageURL": "",
    "filamentSource": "direct",
    "deviceZMax": 0,
    "gcodeTime": 1,
    "gcodeFeature": [],
    "profiles": [
        {
            "processName": "default",
            "sliceHeight": 0.25,
            "sliceShells": 3,
            "sliceShellOrder": "in-out",
            "sliceLayerStart": "last",
            "sliceLayerStartX": 0,
            "sliceLayerStartY": 0,
            "sliceLineWidth": 0,
            "sliceFillGrow": 0,
            "sliceFillAngle": 45,
            "sliceFillWidth": 1,
            "sliceFillOverlap": 0.35,
            "sliceFillSparse": 0.25,
            "sliceFillRepeat": 1,
            "sliceFillRate": 0,
            "sliceSolidRate": 0,
            "sliceFillType": "hex",
            "sliceSupportDensity": 0.1,
            "sliceSupportOffset": 1,
            "sliceSupportGap": 1,
            "sliceSupportSize": 5,
            "sliceSupportArea": 0.1,
            "sliceSupportSpan": 5,
            "sliceSupportGrow": 0,
            "sliceSupportExtra": 0,
            "sliceSupportAngle": 50,
            "sliceSupportNozzle": 0,
            "sliceSupportEnable": false,
            "sliceSupportOutline": true,
            "sliceSolidMinArea": 1,
            "sliceBottomLayers": 3,
            "sliceTopLayers": 3,
            "firstSliceHeight": 0.25,
            "firstLayerRate": 30,
            "firstLayerFillRate": 35,
            "firstLayerPrintMult": 1,
            "firstLayerLineMult": 1,
            "firstLayerYOffset": 0,
            "firstLayerNozzleTemp": 0,
            "firstLayerBedTemp": 0,
            "firstLayerBrim": 0,
            "firstLayerBrimIn": 0,
            "firstLayerBrimTrig": 0,
            "firstLayerBrimGap": 0,
            "firstLayerBeltLead": 3,
            "firstLayerBeltBump": 0,
            "firstLayerFanSpeed": 0,
            "firstLayerFlatten": 0,
            "outputRaft": false,
            "outputRaftSpacing": 0.2,
            "outputDraftShield": false,
            "outputTemp": 200,
            "outputBedTemp": 60,
            "outputFeedrate": 50,
            "outputFinishrate": 50,
            "outputSeekrate": 80,
            "outputShellMult": 1.25,
            "outputFillMult": 1.25,
            "outputSparseMult": 1.25,
            "outputFanLayer": 1,
            "outputFanSpeed": 255,
            "outputRetractDist": 1.5,
            "outputRetractSpeed": 40,
            "outputRetractWipe": 0,
            "outputRetractDwell": 20,
            "outputBrimCount": 2,
            "outputBrimOffset": 2,
            "outputShortPoly": 100,
            "outputMinSpeed": 10,
            "outputCoastDist": 0,
            "outputPurgeTower": 0,
            "outputBeltFirst": false,
            "outputAvoidGaps": true,
            "outputAlternating": false,
            "outputLayerRetract": false,
            "outputLoops": 0,
            "outputInvertX": false,
            "outputInvertY": false,
            "sliceDetectThin": "off",
            "sliceMinHeight": 0,
            "sliceAdaptive": false,
            "zHopDistance": 0.2,
            "arcTolerance": 0,
            "antiBacklash": 1,
            "ranges": []
        }
    ]
}