diff --git a/src/kiri/conf.js b/src/kiri/conf.js index 7e72b9de..81f40a40 100644 --- a/src/kiri/conf.js +++ b/src/kiri/conf.js @@ -411,7 +411,7 @@ camRoughTool: 1000, camRoughSpindle: 1000, camRoughDown: 2, - camRoughOver: 0.5, + camRoughOver: 0.4, camRoughSpeed: 1000, camRoughPlunge: 250, camRoughStock: 0, @@ -423,6 +423,7 @@ camOutlineTool: 1000, camOutlineSpindle: 1000, camOutlineDown: 3, + camOutlineOver: 0.4, camOutlineSpeed: 800, camOutlinePlunge: 250, camOutlineWide: false, diff --git a/src/kiri/init.js b/src/kiri/init.js index 2d2b3f8f..0d0e300d 100644 --- a/src/kiri/init.js +++ b/src/kiri/init.js @@ -1630,8 +1630,8 @@ camRoughTool: UC.newSelect(LANG.cc_tool, {modes:CAM}), camSep: UC.newBlank({class:"pop-sep"}), camRoughSpindle: UC.newInput(LANG.cc_spnd_s, {title:LANG.cc_spnd_l, convert:UC.toInt, modes:CAM, visible:spindleShow}), - camRoughOver: UC.newInput(LANG.cc_sovr_s, {title:LANG.cc_sovr_l, convert:UC.toFloat, bound:UC.bound(0.01,1.0), modes:CAM}), camRoughDown: UC.newInput(LANG.cc_sdwn_s, {title:LANG.cc_sdwn_l, convert:UC.toFloat, modes:CAM, units:true}), + camRoughOver: UC.newInput(LANG.cc_sovr_s, {title:LANG.cc_sovr_l, convert:UC.toFloat, bound:UC.bound(0.01,1.0), modes:CAM}), camRoughSpeed: UC.newInput(LANG.cc_feed_s, {title:LANG.cc_feed_l, convert:UC.toInt, modes:CAM, units:true}), camRoughPlunge: UC.newInput(LANG.cc_plng_s, {title:LANG.cc_plng_l, convert:UC.toInt, modes:CAM, units:true}), camRoughStock: UC.newInput(LANG.cr_lsto_s, {title:LANG.cr_lsto_l, convert:UC.toFloat, modes:CAM, units:true}), @@ -1651,6 +1651,7 @@ camSep: UC.newBlank({class:"pop-sep"}), camOutlineSpindle: UC.newInput(LANG.cc_spnd_s, {title:LANG.cc_spnd_l, convert:UC.toInt, modes:CAM, visible:spindleShow}), camOutlineDown: UC.newInput(LANG.cc_sdwn_s, {title:LANG.cc_sdwn_l, convert:UC.toFloat, modes:CAM, units:true}), + camOutlineOver: UC.newInput(LANG.cc_sovr_s, {title:LANG.cc_sovr_l, convert:UC.toFloat, modes:CAM, bound:UC.bound(0.01,1.0), units:true, show:() => { return UI.camOutlineWide.checked }}), camOutlineSpeed: UC.newInput(LANG.cc_feed_s, {title:LANG.cc_feed_l, convert:UC.toInt, modes:CAM, units:true}), camOutlinePlunge: UC.newInput(LANG.cc_plng_s, {title:LANG.cc_plng_l, convert:UC.toInt, modes:CAM, units:true}), camSep: UC.newBlank({class:"pop-sep"}), @@ -1668,7 +1669,7 @@ camContourTool: UC.newSelect(LANG.cc_tool, {modes:CAM}), camSep: UC.newBlank({class:"pop-sep"}), camContourSpindle: UC.newInput(LANG.cc_spnd_s, {title:LANG.cc_spnd_l, convert:UC.toInt, modes:CAM, visible:spindleShow}), - camContourOver: UC.newInput(LANG.cc_sovr_s, {title:LANG.cc_sovr_l, convert:UC.toFloat, bound:UC.bound(0.05,1.0), modes:CAM}), + camContourOver: UC.newInput(LANG.cc_sovr_s, {title:LANG.cc_sovr_l, convert:UC.toFloat, bound:UC.bound(0.01,1.0), modes:CAM}), camContourSpeed: UC.newInput(LANG.cc_feed_s, {title:LANG.cc_feed_l, convert:UC.toInt, modes:CAM, units:true}), camContourAngle: UC.newInput(LANG.cf_angl_s, {title:LANG.cf_angl_l, convert:UC.toFloat, bound:UC.bound(45,90), modes:CAM}), camTolerance: UC.newInput(LANG.ou_toll_s, {title:LANG.ou_toll_l, convert:UC.toFloat, bound:UC.bound(0,10.0), modes:CAM, units:true}), @@ -2347,7 +2348,7 @@ UI.acct.export.onclick = (ev) => { ev.stopPropagation(); profileExport() }; UI.acct.export.title = LANG.acct_xpo; $('file-recent').onclick = () => { API.modal.show('files') }; - $('file-import').onclick = () => { API.event.import() }; + $('file-import').onclick = (ev) => { API.event.import(ev) }; UI.back.onclick = API.platform.layout; UI.trash.onclick = API.selection.delete; UI.func.slice.onclick = (ev) => { ev.stopPropagation(); API.function.slice() }; diff --git a/src/mode/cam/client.js b/src/mode/cam/client.js index ee00e53f..b1981799 100644 --- a/src/mode/cam/client.js +++ b/src/mode/cam/client.js @@ -197,6 +197,7 @@ type: "outline", tool: process.camOutlineTool, spindle: process.camOutlineSpindle, + step: process.camOutlineOver, down: process.camOutlineDown, rate: process.camOutlineSpeed, plunge: process.camOutlinePlunge, @@ -303,13 +304,32 @@ type: "use right menu to add milling operations ... drag & drop to re-order" }]; let bind = {}; + let scale = API.view.unit_scale(); oplist.forEach((rec,i) => { + let entries = 0; let title = Object.entries(rec).filter((v,i) => { return v[0] !== 'type' - }).map(v => v.join(": ")).join("\n"); + }).map(v => { + entries++; + let [ key, value ] = v; + switch (key) { + case 'tool': + value = new CAM.Tool(current, v[1]).getName(); + break; + case 'down': + case 'rate': + case 'plunge': + case 'leave': + case 'lift': + value = (parseFloat(v[1]) / scale).round(2); + break; + } + return `${key}${value}`; + }).join("\n"); + title = `${title}
`; html.appendAll([ `
`, - title.length ? `
${title}
` : '', + entries ? `
${title}
` : '', ``, ``, `
` diff --git a/src/mode/cam/ops.js b/src/mode/cam/ops.js index bbca9701..74fd36a6 100644 --- a/src/mode/cam/ops.js +++ b/src/mode/cam/ops.js @@ -406,10 +406,11 @@ }); } else { if (op.wide) { + let stepover = outlineToolDiam * op.step; offset.slice().forEach(op => { // clone removes inners but the real solution is // to limit expanded shells to through holes - POLY.expand([op.clone(true)], outlineToolDiam * 0.5, slice.z, offset, 1); + POLY.expand([op.clone(true)], stepover, slice.z, offset, 1); }); } } diff --git a/src/mode/cam/prepare.js b/src/mode/cam/prepare.js index 97e07711..be656145 100644 --- a/src/mode/cam/prepare.js +++ b/src/mode/cam/prepare.js @@ -50,6 +50,8 @@ function prepEach(widget, settings, print, firstPoint, update) { + if (widget.camops.length === 0) return; + let device = settings.device, process = settings.process, stock = settings.stock, @@ -87,8 +89,8 @@ toolType, toolDiam, toolDiamMove, - feedRate, plungeRate, + feedRate, lastTool, lastMode, lastPoint, @@ -169,10 +171,6 @@ printPoint = closest.first(); emitDrill(closest, drillDown, drillLift, drillDwell); } - // TODO emit in next-closest-order - // polys.forEach(function(poly) { - // emitDrill(poly, drillDown, drillLift, drillDwell); - // }); } function emitDrill(poly, down, lift, dwell) { @@ -387,125 +385,6 @@ opSum += weight; } - // todo first move into positon - if (false) slices.forEach(function(slice, sliceIndex) { - depthData.layer++; - isNewMode = slice.camMode != lastMode; - lastMode = slice.camMode; - // force move at start of each slice - nextIsMove = true; - if (isNewMode) depthData.layer = 0; - - switch (slice.camMode) { - case PRO.LEVEL: - setTool(process.camRoughTool, process.camRoughSpeed, process.camRoughPlunge); - spindle = Math.min(spindleMax, process.camRoughSpindle); - const level = []; - slice.camLines.forEach(function (poly) { - level.push(poly); - if (poly.inner) { - poly.inner.forEach(function(inner) { - level.push(inner); - }) - } - }); - // set winding specified in output - POLY.setWinding(level, process.camConventional, false); - printPoint = poly2polyEmit(level, printPoint, function(poly, index, count) { - poly.forEachPoint(function(point, pidx, points, offset) { - camOut(point.clone(), offset !== 0); - }, true, index); - }); - newLayer(); - break; - case PRO.ROUGH: - case PRO.OUTLINE: - let dir = process.camConventional; - if (slice.camMode === PRO.ROUGH) { - setTool(process.camRoughTool, process.camRoughSpeed, process.camRoughPlunge); - spindle = Math.min(spindleMax, process.camRoughSpindle); - depthData.roughDiam = toolDiam; - } else { - setTool(process.camOutlineTool, process.camOutlineSpeed, process.camOutlinePlunge); - spindle = Math.min(spindleMax, process.camOutlineSpindle); - depthData.outlineDiam = toolDiam; - if (!process.camOutlinePocket) { - dir = !dir; - } - } - let polys = [], t = [], c = []; - POLY.flatten(slice.camLines).forEach(function (poly) { - let child = poly.parent; - if (depthFirst) { poly = poly.clone(); poly.parent = child ? 1 : 0 } - if (child) c.push(poly); else t.push(poly); - poly.layer = depthData.layer; - polys.push(poly); - }); - // set cut direction on outer polys - POLY.setWinding(t, dir); - // set cut direction on inner polys - POLY.setWinding(c, !dir); - if (depthFirst) { - (slice.camMode === PRO.ROUGH ? depthData.rough : depthData.outline).append(polys); - // polys.xout(`prep ${slice.z}`); - } else { - printPoint = poly2polyEmit(polys, printPoint, function(poly, index, count) { - poly.forEachPoint(function(point, pidx, points, offset) { - camOut(point.clone(), offset !== 0); - }, poly.isClosed(), index); - }); - newLayer(); - } - break; - case PRO.CONTOUR_X: - case PRO.CONTOUR_Y: - if (isNewMode || !printPoint) { - // force start at lower left corner - printPoint = newPoint(bounds.min.x,bounds.min.y,zmax); - } - setTool(process.camContourTool, process.camContourSpeed, process.camFastFeedZ); - spindle = Math.min(spindleMax, process.camContourSpindle); - depthData.outlineDiam = toolDiam; - // todo find closest next trace/trace-point - { - let polys = [], poly, emit; - slice.camLines.forEach(function (poly) { - if (depthFirst) poly = poly.clone(true); - polys.push({first:poly.first(), last:poly.last(), poly:poly}); - }); - if (depthFirst) { - (slice.camMode === PRO.CONTOUR_X ? depthData.contourx : depthData.contoury).appendAll(polys); - } else { - printPoint = tip2tipEmit(polys, printPoint, function(el, point, count) { - poly = el.poly; - if (poly.last() === point) { - poly.reverse(); - } - poly.forEachPoint(function(point, pidx) { - camOut(point.clone(), pidx > 0); - }, false); - // return lastPoint; - }); - newLayer(); - } - } - break; - case PRO.TRACE: - if (depthFirst) { - depthData.trace.push(slice); - break; - } else { - emitTrace(slice); - } - break; - case PRO.DRILL: - setTool(process.camDrillTool, process.camDrillDownSpeed, process.camDrillDownSpeed); - depthData.drill.appendAll(slice.camLines); - break; - } - update(sliceIndex / slices.length); - }); - function emitTrace(slice) { let { tool, speed, plunge, path } = slice.camTrace; setTool(tool, speed, plunge); @@ -586,99 +465,6 @@ return start; } - // act on accumulated layer data - if (false && depthFirst) { - // roughing depth first - if (depthData.rough.length > 0) { - lastMode = PRO.ROUGH; - setTool(process.camRoughTool, process.camRoughSpeed, process.camRoughPlunge); - spindle = Math.min(spindleMax, process.camRoughSpindle); - let tops = depthData.rough.map(level => { - return POLY.nest(level.filter(poly => poly.depth === 0).clone()); - }); - printPoint = depthRoughPath(printPoint, 0, depthData.rough, tops, polyEmit); - } - // outline depth first - if (depthData.outline.length > 0) { - // depthData.outline.xout('depth'); - lastMode = PRO.OUTLINE; - setTool(process.camOutlineTool, process.camOutlineSpeed, process.camOutlinePlunge); - spindle = Math.min(spindleMax, process.camOutlineSpindle); - let flatLevels = depthData.outline.map(level => { - return POLY.flatten(level.clone(true), [], true).filter(p => !(p.depth = 0)); - }).filter(l => l.length > 0); - // flatLevels.xout('flat'); - // start with the smallest polygon on the top - printPoint = flatLevels[0] - // .filter(l => l.length > 0)[0] - .sort((a,b) => { return a.area() - b.area() })[0] - .average(); - printPoint = depthOutlinePath(printPoint, 0, flatLevels, toolDiam, polyEmit, false); - printPoint = depthOutlinePath(printPoint, 0, flatLevels, toolDiam, polyEmit, true); - } - // two modes for deferred outlining: x then y or combined - if (contour && contourCurves) { - lastMode = PRO.CONTOUR_X; - setTool(process.camContourTool, process.camContourSpeed, process.camContourPlunge); - spindle = Math.min(spindleMax, process.camContourSpindle); - // combined deferred contour x and y outlining - let contourxy = [].appendAll(depthData.contourx).appendAll(depthData.contoury); - printPoint = tip2tipEmit(contourxy, printPoint, function(el, point, count) { - let poly = el.poly; - if (poly.last() === point) { - poly.reverse(); - } - poly.forEachPoint(function(point, pidx) { - camOut(point.clone(), pidx > 0); - }, false); - newLayer(); - return lastPoint; - }); - } else if (contour) { - setTool(process.camContourTool, process.camContourSpeed, process.camContourPlunge); - spindle = Math.min(spindleMax, process.camContourSpindle); - // deferred contour x outlining - if (depthData.contourx.length > 0) { - lastMode = PRO.CONTOUR_X; - // force start at lower left corner - // printPoint = newPoint(bounds.min.x,bounds.min.y,zmax); - printPoint = tip2tipEmit(depthData.contourx, printPoint, function(el, point, count) { - let poly = el.poly; - if (poly.last() === point) poly.reverse(); - poly.forEachPoint(function(point, pidx) { - camOut(point.clone(), pidx > 0); - }, false); - newLayer(); - return lastPoint; - }); - } - // deferred contour y outlining - if (depthData.contoury.length > 0) { - lastMode = PRO.CONTOUR_Y; - // force start at lower left corner - printPoint = tip2tipEmit(depthData.contoury, printPoint, function(el, point, count) { - let poly = el.poly; - if (poly.last() === point) poly.reverse(); - poly.forEachPoint(function(point, pidx) { - camOut(point.clone(), pidx > 0); - }, false); - newLayer(); - return lastPoint; - }); - } - } - depthData.trace.forEach(slice => { - emitTrace(slice); - }); - } - - // drilling is always depth first, and always output last (change?) - if (false && depthData.drill.length > 0) { - lastMode = PRO.DRILL; - setTool(process.camDrillTool, process.camDrillDownSpeed, process.camDrillDownSpeed); - emitDrills(depthData.drill); - } - // last layer/move is to zmax // injected into the last layer generated if (lastPoint) diff --git a/src/mode/cam/slice.js b/src/mode/cam/slice.js index 47ee928a..9a07e400 100644 --- a/src/mode/cam/slice.js +++ b/src/mode/cam/slice.js @@ -23,26 +23,13 @@ * @param {Function} output */ CAM.slice = function(settings, widget, onupdate, ondone) { - let conf = settings, - proc = conf.process, + let mesh = widget.mesh, + proc = settings.process, stock = settings.stock || {}, hasStock = stock.x && stock.y && stock.z && proc.camStockOn, camOps = widget.camops = [], sliceAll = widget.slices = [], - unitsName = settings.controller.units, - procOutlineWide = proc.camOutlineWide, - procOutlineOut = proc.camOutlineOut, - procOutlineIn = proc.camOutlineIn, - procOutlineOn = proc.camOutlineOn, - procOutline = procOutlineOn && proc.camOutlineDown, - procContourX = proc.camContourXOn && proc.camOutlinePlunge, - procContourY = proc.camContourYOn && proc.camOutlinePlunge, - procContour = procContourX || procContourY, - procDrill = proc.camDrillingOn && proc.camDrillDown && proc.camDrillDownSpeed, - procDrillReg = proc.camDrillReg, - outlineDown = procOutline ? proc.camOutlineDown : Infinity, bounds = widget.getBoundingBox(), - mesh = widget.mesh, zBottom = proc.camZBottom, zMin = Math.max(bounds.min.z, zBottom), zMax = bounds.max.z, diff --git a/web/kiri/lang/en.js b/web/kiri/lang/en.js index 4c498b25..f939f8a4 100644 --- a/web/kiri/lang/en.js +++ b/web/kiri/lang/en.js @@ -263,7 +263,7 @@ kiri.lang['en-us'] = { cc_spnd_s: "spindle rpm", cc_spnd_l: "spindle speed in\nrevolutions / minute", cc_sovr_s: "step over", - cc_sovr_l: "0.1 - 1.0\nfraction of\ntool diameter", + cc_sovr_l: "as a fraction of\ntool diameter", cc_sdwn_s: "step down", cc_sdwn_l: "step down depth\nfor each pass\nin workspace units\n0 to disable", cc_feed_s: "feed rate",