thin fill no longer restricts flow rate. gcode parser supports G92. fdm parsing first layer better detected

src/kiri/print.js

@@ -24,7 +24,8 @@
 
     let lastPoint = null,
         lastEmit = null,
-        lastOut = null;;
+        lastOut = null,
+        lastPos;
 
     KIRI.Print = Print;
 
@@ -122,6 +123,7 @@
 
         let dz = 0,
             abs = true,
+            absE = true,
             defh = 0,
             height = 0,
             factor = 1,
@@ -168,6 +170,7 @@
             // always add moves to the current sequence
             if (moving) {
                 addOutput(seq, point, false, pos.F, tool).retract = retract;
+                lastPos = Object.assign({}, pos);
                 return;
             }
 
@@ -175,6 +178,10 @@
                 seq.Z = pos.Z;
             }
 
+            if (fdm && height === 0) {
+                seq.height = defh = height = pos.Z;
+            }
+
             // non-move in a new plane means burp out
             // the old sequence and start a new one
             if (seq.Z != pos.Z) {
@@ -185,8 +192,21 @@
                 output.push(seq);
             }
 
+            // debug extrusion rate
+            if (false && fdm && lastPos) {
+                let dE = (absE ? pos.E - lastPos.E : pos.E);
+                let dV = Math.sqrt(
+                    (Math.pow(pos.X - lastPos.X ,2)) +
+                    (Math.pow(pos.Y - lastPos.Y ,2))
+                );
+                let dR = (dE / dV); // filament per mm
+                if (dR < 0.025) {
+                    console.log(height.round(2), pos.Z.round(2), dV.round(2), dR.round(3));
+                }
+            }
             // add point to current sequence
             addOutput(seq, point, true, pos.F, tool).retract = retract;
+            lastPos = Object.assign({}, pos);
         }
 
         lines.forEach(function(line) {
@@ -209,6 +229,12 @@
             }
             pos.E = 0.0;
             switch (cmd) {
+                case 'M82':
+                    absE = true;
+                    break;
+                case 'M83':
+                    absE = false;
+                    break;
                 case 'G20':
                     factor = 25.4;
                     break;
@@ -223,6 +249,11 @@
                     // relative positioning
                     abs = false;
                     break;
+                case 'G92':
+                    line.forEach(function(tok) {
+                        pos[tok.charAt(0)] = parseFloat(tok.substring(1));
+                    });
+                    break;
                 case 'G0':
                     G0G1(true, line);
                     break;
@@ -271,6 +302,7 @@
                 return lastOut;
             }
         }
+        // if (emit && emit < 1) console.log(emit);
         lastPoint = point;
         lastEmit = emit;
         lastOut = new Output(point, emit, speed, tool);
@@ -568,7 +600,8 @@
                 // to avoid shaking the printer to death.
                 if (dist <= thinDist && len <= thinDist) {
                     p2 = p1.midPointTo(p2);
-                    addOutput(preout, p2, fill * (dist / thinWall), fillSpeed, extruder);
+                    // addOutput(preout, p2, fill * (dist / thinWall), fillSpeed, extruder);
+                    addOutput(preout, p2, fill, fillSpeed, extruder);
                 } else {
                     // retract if dist trigger or crosses a slice top polygon
                     if (!fast && dist > retractDist && (zhop || intersectsTop(startPoint, p1))) {

src/kiri/worker.js

@@ -183,11 +183,11 @@ KIRI.worker = {
         const thin = settings.controller.lineType === 'line' || mode !== 'FDM';
         const flat = settings.controller.lineType === 'flat' && mode === 'FDM';
         const parsed = print.parseGCode(code, offset, progress => {
-            send.data({ progress: progress * 0.5 });
+            send.data({ progress: progress * 0.25 });
         }, done => {
             const maxSpeed = print.maxSpeed;
             const layers = KIRI.driver.FDM.prepareRender(done.output, progress => {
-                send.data({ progress: 0.5 + progress * 0.5 });
+                send.data({ progress: 0.25 + progress * 0.75 });
             }, { thin, flat, tools });
             send.done({parsed: KIRI.codec.encode(layers), maxSpeed});
         }, { fdm : mode === 'FDM' });