diff --git a/src/kiri-dev/laser/Snapmaker.A250T b/src/kiri-dev/laser/Snapmaker.A250T
new file mode 100644
index 00000000..e300378d
--- /dev/null
+++ b/src/kiri-dev/laser/Snapmaker.A250T
@@ -0,0 +1,35 @@
+{
+    "file-ext": "gcode",
+    "token-space": " ",
+    "pre":[
+        "G90            ; absolute positioning",
+        "G21            ; metric units",
+        "M106 P0 S255   ; fan on",
+        "M3 P{power} S255   ; set default laser power",
+        "M5             ; laser off",
+        "G0 F3000       ; default feed rates",
+        "G1 F800        ; default feed rates"
+    ],
+    "post":[
+        "M5             ; laser off",
+        "M107 P0        ; fan off",
+        "G91            ; relative positioning",
+        "G0 Z0 F150     ; raise laser",
+        "G90            ; absolute positioning"
+    ],
+    "laser-on":[
+        "M3 P{power}"
+    ],
+    "laser-off":[
+        "M5"
+    ],
+    "settings": {
+        "origin_center": false,
+        "bed_width": 230,
+        "bed_depth": 235
+    },
+    "profiles":[{
+        "processName": "Snapmaker Laser",
+        "ctOriginCenter": false
+    }]
+}
\ No newline at end of file
diff --git a/src/kiri-dev/laser/Snapmaker.A350T b/src/kiri-dev/laser/Snapmaker.A350T
new file mode 100644
index 00000000..0817ac2b
--- /dev/null
+++ b/src/kiri-dev/laser/Snapmaker.A350T
@@ -0,0 +1,35 @@
+{
+    "file-ext": "gcode",
+    "token-space": " ",
+    "pre":[
+        "G90            ; absolute positioning",
+        "G21            ; metric units",
+        "M106 P0 S255   ; fan on",
+        "M3 P{power} S255   ; set default laser power",
+        "M5             ; laser off",
+        "G0 F3000       ; default feed rates",
+        "G1 F800        ; default feed rates"
+    ],
+    "post":[
+        "M5             ; laser off",
+        "M107 P0        ; fan off",
+        "G91            ; relative positioning",
+        "G0 Z0 F150     ; raise laser",
+        "G90            ; absolute positioning"
+    ],
+    "laser-on":[
+        "M3 P{power}"
+    ],
+    "laser-off":[
+        "M5"
+    ],
+    "settings": {
+        "origin_center": false,
+        "bed_width": 320,
+        "bed_depth": 335
+    },
+    "profiles":[{
+        "processName": "Snapmaker Laser",
+        "ctOriginCenter": false
+    }]
+}
diff --git a/src/kiri-dev/laser/Xtool.P2 b/src/kiri-dev/laser/Xtool.P2
new file mode 100644
index 00000000..8fcbda7f
--- /dev/null
+++ b/src/kiri-dev/laser/Xtool.P2
@@ -0,0 +1,12 @@
+{
+    "file-ext": "svg",
+    "token-space": " ",
+    "pre":[],
+    "post":[],
+    "laser-on":[],
+    "laser-off":[],
+	"settings": {
+		"bed_width": 600,
+		"bed_depth": 308
+	}
+}
\ No newline at end of file
diff --git a/src/kiri-dev/laser/xTool.D1 b/src/kiri-dev/laser/xTool.D1
new file mode 100644
index 00000000..882586ca
--- /dev/null
+++ b/src/kiri-dev/laser/xTool.D1
@@ -0,0 +1,12 @@
+{
+    "file-ext": "svg",
+    "token-space": " ",
+    "pre":[],
+    "post":[],
+    "laser-on":[],
+    "laser-off":[],
+	"settings": {
+		"bed_width": 432,
+		"bed_depth": 406
+	}
+}
\ No newline at end of file
diff --git a/src/kiri-dev/laser/xTool.F1 b/src/kiri-dev/laser/xTool.F1
new file mode 100644
index 00000000..ef567afc
--- /dev/null
+++ b/src/kiri-dev/laser/xTool.F1
@@ -0,0 +1,12 @@
+{
+    "file-ext": "svg",
+    "token-space": " ",
+    "pre":[],
+    "post":[],
+    "laser-on":[],
+    "laser-off":[],
+	"settings": {
+		"bed_width": 115,
+		"bed_depth": 115
+	}
+}
\ No newline at end of file
diff --git a/src/kiri-dev/laser/xTool.F1.Ultra b/src/kiri-dev/laser/xTool.F1.Ultra
new file mode 100644
index 00000000..df6ca753
--- /dev/null
+++ b/src/kiri-dev/laser/xTool.F1.Ultra
@@ -0,0 +1,12 @@
+{
+    "file-ext": "svg",
+    "token-space": " ",
+    "pre":[],
+    "post":[],
+    "laser-on":[],
+    "laser-off":[],
+	"settings": {
+		"bed_width": 220,
+		"bed_depth": 220
+	}
+}
\ No newline at end of file
diff --git a/src/kiri-dev/laser/xTool.M1 b/src/kiri-dev/laser/xTool.M1
new file mode 100644
index 00000000..b6bb67a4
--- /dev/null
+++ b/src/kiri-dev/laser/xTool.M1
@@ -0,0 +1,12 @@
+{
+    "file-ext": "svg",
+    "token-space": " ",
+    "pre":[],
+    "post":[],
+    "laser-on":[],
+    "laser-off":[],
+	"settings": {
+		"bed_width": 385,
+		"bed_depth": 300
+	}
+}
\ No newline at end of file
diff --git a/src/kiri-dev/laser/xTool.P2S b/src/kiri-dev/laser/xTool.P2S
new file mode 100644
index 00000000..9b99570b
--- /dev/null
+++ b/src/kiri-dev/laser/xTool.P2S
@@ -0,0 +1,12 @@
+{
+    "file-ext": "svg",
+    "token-space": " ",
+    "pre":[],
+    "post":[],
+    "laser-on":[],
+    "laser-off":[],
+	"settings": {
+		"bed_width": 680,
+		"bed_depth": 360
+	}
+}
\ No newline at end of file
diff --git a/src/kiri-dev/laser/xTool.S1 b/src/kiri-dev/laser/xTool.S1
new file mode 100644
index 00000000..491908dd
--- /dev/null
+++ b/src/kiri-dev/laser/xTool.S1
@@ -0,0 +1,12 @@
+{
+    "file-ext": "svg",
+    "token-space": " ",
+    "pre":[],
+    "post":[],
+    "laser-on":[],
+    "laser-off":[],
+	"settings": {
+		"bed_width": 608,
+		"bed_depth": 385
+	}
+}
\ No newline at end of file