diff --git a/web/kiri/lang/da.js b/web/kiri/lang/da.js
index 0b9702da..63112b8c 100644
--- a/web/kiri/lang/da.js
+++ b/web/kiri/lang/da.js
@@ -282,9 +282,9 @@ kiri.lang['da-dk'] = {
     fl_lahi_s: "laghøjde",
     fl_lahi_l: ["højde af hver lag","i millimeter","skulle være >= laghøjde"],
     fl_rate_s: "skal hastighed",
-    fl_rate_l: ["max hastighed på skaller","i millimeter / minuttet"],
+    fl_rate_l: ["max hastighed på skaller","i millimeter / sekund"],
     fl_frat_s: "fylde hastighed",
-    fl_frat_l: ["fylde max print hastighed","i millimeter / minuttet"],
+    fl_frat_l: ["fylde max print hastighed","i millimeter / sekund"],
     fl_mult_s: "print factor",
     fl_mult_l: ["ekstrudering multiplikator","0.0 - 2.0"],
     fl_sfac_s: "width factor",
@@ -476,7 +476,7 @@ kiri.lang['da-dk'] = {
     ou_powr_s: "kraft",
     ou_powr_l: ["0 - 100","repræsenterer %"],
     ou_sped_s: "hastighed",
-    ou_sped_l: "millimeter / minuttet",
+    ou_sped_l: "millimeter / sekund",
     ou_mrgd_s: "sammensæt",
     ou_mrgd_l: ["flet alle lag ved hjælp af","farvekodning for at betegne","stabeldybde"],
     ou_grpd_s: "grupperet",
@@ -494,11 +494,11 @@ kiri.lang['da-dk'] = {
     ou_bedd_s: "plade temp",
     ou_bedd_l: "grader i celsius",
     ou_feed_s: "print hastighed",
-    ou_feed_l: ["max print hastighed","millimeter / minuttet"],
+    ou_feed_l: ["max print hastighed","millimeter / sekund"],
     ou_fini_s: "afslutningshastighed",
-    ou_fini_l: ["yderste skalhastighed","millimeter / minuttet"],
+    ou_fini_l: ["yderste skalhastighed","millimeter / sekund"],
     ou_move_s: "print hastighed",
-    ou_move_l: ["rejsehastighed","millimeter / minuttet","0 = aktiver G0 bevægelser"],
+    ou_move_l: ["rejsehastighed","millimeter / sekund","0 = aktiver G0 bevægelser"],
     ou_shml_s: "skal faktor",
     ou_flml_s: "solid faktor",
     ou_spml_s: "fylde faktor",
@@ -578,7 +578,7 @@ kiri.lang['da-dk'] = {
     ad_play_s: "polish layers",
     ad_play_l: ["polish up to specified","# of layers at a time"],
     ad_pspd_s: "polish speed",
-    ad_pspd_l: ["polishing speed","in millimeters / minute"],
+    ad_pspd_l: ["polishing speed","in millimeters / second"],
 
     // CAM EXPERT
     cx_fast_s: "spring skygge over",
diff --git a/web/kiri/lang/de-de.js b/web/kiri/lang/de-de.js
index 384256a5..ae5e3bd4 100644
--- a/web/kiri/lang/de-de.js
+++ b/web/kiri/lang/de-de.js
@@ -279,9 +279,9 @@ kiri.lang['de-de'] = {
     fl_lahi_s:      "Schichthöhe",
     fl_lahi_l:      ["Höhe der ersten Schicht","in in mm","sollte >= der Standard-Schichthöhe sein"],
     fl_rate_s:      "Wand-Geschwindigkeit",
-    fl_rate_l:      ["Maximalgeschwindigkeit beim Drucken von Wänden","in mm / min"],
+    fl_rate_l:      ["Maximalgeschwindigkeit beim Drucken von Wänden","in mm / s"],
     fl_frat_s:      "Füll-Geschwindikeit",
-    fl_frat_l:      ["Maximalgeschwindikeit beim Drucken von Füllung","in mm / min"],
+    fl_frat_l:      ["Maximalgeschwindikeit beim Drucken von Füllung","in mm / s"],
     fl_mult_s:      "Extrusions-Faktor",
     fl_mult_l:      ["Exktrusions-Faktor","0.0 - 2.0"],
     fl_sfac_s:      "Breiten-Faktor",
@@ -469,7 +469,7 @@ kiri.lang['de-de'] = {
     ou_powr_s:      "power",
     ou_powr_l:      ["0 - 100","represents %"],
     ou_sped_s:      "speed",
-    ou_sped_l:      "millimeters / minute",
+    ou_sped_l:      "millimeters / seconds",
     ou_mrgd_s:      "merged",
     ou_mrgd_l:      ["merge all layers using","color coding to denote","stacking depth"],
     ou_grpd_s:      "grouped",
@@ -487,11 +487,11 @@ kiri.lang['de-de'] = {
     ou_bedd_s:      "Betttemperatur",
     ou_bedd_l:      "In Grad Celsius",
     ou_feed_s:      "Druckgewschwindigkeit",
-    ou_feed_l:      ["Maximale Druckgeschwindigkeit","mm / min"],
+    ou_feed_l:      ["Maximale Druckgeschwindigkeit","mm / s"],
     ou_fini_s:      "Außengeschwindigkeit",
-    ou_fini_l:      ["Geschwindigkeit für Außenwände","mm / min"],
+    ou_fini_l:      ["Geschwindigkeit für Außenwände","mm / s"],
     ou_move_s:      "Bewegungsgeschwnidgkeit",
-    ou_move_l:      ["Geschwndigkeit, wenn nicht gedruckt wird ","mm / min","0 = aktiviere G0 Befehle"],
+    ou_move_l:      ["Geschwndigkeit, wenn nicht gedruckt wird ","mm / s","0 = aktiviere G0 Befehle"],
     ou_shml_s:      "Wand-Faktor",
     ou_flml_s:      "Voll-Füll-Faktor",
     ou_spml_s:      "Füll-Material-Faktor",
@@ -569,7 +569,7 @@ kiri.lang['de-de'] = {
     ad_play_s:      "Ebenen glätten",
     ad_play_l:      ["glätte bis zu","dieser Anzahl Ebenen"],
     ad_pspd_s:      "Glätt-Geschwindigkeit",
-    ad_pspd_l:      ["Glätt-Geschwindigkeit","in mm / min"],
+    ad_pspd_l:      ["Glätt-Geschwindigkeit","in mm / s"],
 
     // CAM EXPERT
     cx_fast_s:      "skip shadow",
diff --git a/web/kiri/lang/es-es.js b/web/kiri/lang/es-es.js
index 6e1b31c5..944cf279 100644
--- a/web/kiri/lang/es-es.js
+++ b/web/kiri/lang/es-es.js
@@ -287,9 +287,9 @@ kiri.lang['es-es'] = {
     fl_lahi_s:      "altura de capa",
     fl_lahi_l:      ["altura de cada rebanada","en milímetros","debe ser >= altura de rebanada"],
     fl_rate_s:      "velocidad de la cáscara",
-    fl_rate_l:      ["velocidad máxima de impresión de la cáscara","en milímetros/minuto"],
+    fl_rate_l:      ["velocidad máxima de impresión de la cáscara","en milímetros/segundo"],
     fl_frat_s:      "velocidad de llenado",
-    fl_frat_l:      ["velocidad máxima de impresión de llenado","en milímetros / minuto"],
+    fl_frat_l:      ["velocidad máxima de impresión de llenado","en milímetros / segundo"],
     fl_mult_s:      "factor de flujo",
     fl_mult_l:      ["multiplicador de extrusión","0.0 - 2.0"],
     fl_sfac_s:      "factor de ancho",
@@ -477,7 +477,7 @@ kiri.lang['es-es'] = {
     ou_powr_s:      "potencia",
     ou_powr_l:      ["0 - 100","representa %"],
     ou_sped_s:      "velocidad",
-    ou_sped_l:      "milímetros / minuto",
+    ou_sped_l:      "milímetros / segundo",
     ou_mrgd_s:      "fusionadas",
     ou_mrgd_l:      ["fusionar todas las capas usando","codificación de colores para indicar","la profundidad de apilamiento"],
     ou_grpd_s:      "agrupadas",
@@ -495,11 +495,11 @@ kiri.lang['es-es'] = {
     ou_bedd_s:      "temperatura de la cama",
     ou_bedd_l:      "en grados centígrados",
     ou_feed_s:      "velocidad de impresión",
-    ou_feed_l:      ["velocidad máxima de impresión","milímetros / minuto"],
+    ou_feed_l:      ["velocidad máxima de impresión","milímetros / segundo"],
     ou_fini_s:      "velocidad de impresión",
-    ou_fini_l:      ["velocidad de la capa más externad","milímetros / minuto"],
+    ou_fini_l:      ["velocidad de la capa más externad","milímetros / segundo"],
     ou_move_s:      "velocidad de movimiento",
-    ou_move_l:      ["velocidad de movimiento sin impresión","milímetros / minuto","0 = habilitar movimientos G0"],
+    ou_move_l:      ["velocidad de movimiento sin impresión","milímetros / segundo","0 = habilitar movimientos G0"],
     ou_shml_s:      "factor de cáscara",
     ou_flml_s:      "factor sólido",
     ou_spml_s:      "factor de relleno",
diff --git a/web/kiri/lang/fr.js b/web/kiri/lang/fr.js
index 72f1ade3..e30df48f 100644
--- a/web/kiri/lang/fr.js
+++ b/web/kiri/lang/fr.js
@@ -281,9 +281,9 @@ kiri.lang['fr-fr'] = {
     fl_lahi_s:      "hauteur de couche",
     fl_lahi_l:      ["hauteur de chaque couche", "en millimètres", "devrait être >= hauteur de la couche"],
     fl_rate_s:      "vitesse périmètres",
-    fl_rate_l:      ["vitesse maximale d'impression des coques", "en millimètres / minute"],
+    fl_rate_l:      ["vitesse maximale d'impression des coques", "en millimètres / seconde"],
     fl_frat_s:      "vitesse remplissage",
-    fl_frat_l:      ["vitesse maximale d'impression du remplissage", "en millimètres / minute"],
+    fl_frat_l:      ["vitesse maximale d'impression du remplissage", "en millimètres / seconde"],
     fl_mult_s:      "débit",
     fl_mult_l:      ["multiplicateur d'extrusion","0.0 - 2.0"],
     fl_sfac_s:      "largeur",
@@ -471,7 +471,7 @@ kiri.lang['fr-fr'] = {
     ou_powr_s:      "power",
     ou_powr_l:      ["0 - 100","represents %"],
     ou_sped_s:      "speed",
-    ou_sped_l:      "millimeters / minute",
+    ou_sped_l:      "millimeters / second",
     ou_mrgd_s:      "merged",
     ou_mrgd_l:      ["merge all layers using","color coding to denote","stacking depth"],
     ou_grpd_s:      "grouped",
@@ -489,11 +489,11 @@ kiri.lang['fr-fr'] = {
     ou_bedd_s:      "température plateau",
     ou_bedd_l:      "degrés en celsius",
     ou_feed_s:      "vitesse impression",
-    ou_feed_l:      ["vitesse d'impression maximale","millimètres / minute"],
+    ou_feed_l:      ["vitesse d'impression maximale","millimètres / seconde"],
     ou_fini_s:      "vitesse coque",
-    ou_fini_l:      ["vitesse de la coque extérieure","millimètres / minute"],
+    ou_fini_l:      ["vitesse de la coque extérieure","millimètres / seconde"],
     ou_move_s:      "vitesse déplacement",
-    ou_move_l:      ["vitesse de déplacement sans impression","millimètres / minute","0 = active déplacements G0"],
+    ou_move_l:      ["vitesse de déplacement sans impression","millimètres / seconde","0 = active déplacements G0"],
     ou_shml_s:      "débit de coque",
     ou_flml_s:      "débit de solidité",
     ou_spml_s:      "débit de remplissage",
@@ -571,7 +571,7 @@ kiri.lang['fr-fr'] = {
     ad_play_s:      "couches de polissage",
     ad_play_l:      ["polir jusqu'au nombre spécifié", "# de couches à la fois"],
     ad_pspd_s:      "vitesse de polissage",
-    ad_pspd_l:      ["vitesse de polissage", "en millimètres / minute"],
+    ad_pspd_l:      ["vitesse de polissage", "en millimètres / seconde"],
 
     // CAM EXPERT
     cx_fast_s:      "skip shadow",
diff --git a/web/kiri/lang/pl-pl.js b/web/kiri/lang/pl-pl.js
index f6870e66..2545e6e7 100644
--- a/web/kiri/lang/pl-pl.js
+++ b/web/kiri/lang/pl-pl.js
@@ -284,9 +284,9 @@ kiri.lang['pl-pl'] = {
     fl_lahi_s:      "layer height",
     fl_lahi_l:      ["height of each slice","in millimeters","should be >= slice height"],
     fl_rate_s:      "shell speed",
-    fl_rate_l:      ["shell printing max speed","in millimeters / minute"],
+    fl_rate_l:      ["shell printing max speed","in millimeters / second"],
     fl_frat_s:      "fill speed",
-    fl_frat_l:      ["fill printing max speed","in millimeters / minute"],
+    fl_frat_l:      ["fill printing max speed","in millimeters / second"],
     fl_mult_s:      "flow factor",
     fl_mult_l:      ["extrusion multiplier","0.0 - 2.0"],
     fl_sfac_s:      "width factor",
@@ -474,7 +474,7 @@ kiri.lang['pl-pl'] = {
     ou_powr_s:      "power",
     ou_powr_l:      ["0 - 100","represents %"],
     ou_sped_s:      "speed",
-    ou_sped_l:      "millimeters / minute",
+    ou_sped_l:      "millimeters / second",
     ou_mrgd_s:      "merged",
     ou_mrgd_l:      ["merge all layers using","color coding to denote","stacking depth"],
     ou_grpd_s:      "grouped",
@@ -492,11 +492,11 @@ kiri.lang['pl-pl'] = {
     ou_bedd_s:      "bed temp",
     ou_bedd_l:      "degrees in celsius",
     ou_feed_s:      "print speed",
-    ou_feed_l:      ["max print speed","millimeters / minute"],
+    ou_feed_l:      ["max print speed","millimeters / second"],
     ou_fini_s:      "finish speed",
-    ou_fini_l:      ["outermost shell speed","millimeters / minute"],
+    ou_fini_l:      ["outermost shell speed","millimeters / second"],
     ou_move_s:      "move speed",
-    ou_move_l:      ["non-print move speed","millimeters / minute","0 = enable G0 moves"],
+    ou_move_l:      ["non-print move speed","millimeters / second","0 = enable G0 moves"],
     ou_shml_s:      "shell factor",
     ou_flml_s:      "solid factor",
     ou_spml_s:      "infill factor",
@@ -574,7 +574,7 @@ kiri.lang['pl-pl'] = {
     ad_play_s:      "polish layers",
     ad_play_l:      ["polish up to specified","# of layers at a time"],
     ad_pspd_s:      "polish speed",
-    ad_pspd_l:      ["polishing speed","in millimeters / minute"],
+    ad_pspd_l:      ["polishing speed","in millimeters / second"],
 
     // CAM EXPERT
     cx_fast_s:      "skip shadow",
diff --git a/web/kiri/lang/pt.js b/web/kiri/lang/pt.js
index 3afdeac1..21e152bf 100644
--- a/web/kiri/lang/pt.js
+++ b/web/kiri/lang/pt.js
@@ -287,9 +287,9 @@ kiri.lang['pt-pt'] = {
     fl_lahi_s:      "altura da camada",
     fl_lahi_l:      ["altura de cada fatia","em milímetros","deve ser >= altura da fatia"],
     fl_rate_s:      "velocidade do cartucho",
-    fl_rate_l:      ["velocidade máxima de impressão do cartucho","em milímetros / minuto"],
+    fl_rate_l:      ["velocidade máxima de impressão do cartucho","em milímetros / segundo"],
     fl_frat_s:      "velocidade de preenchimento",
-    fl_frat_l:      ["velocidade máxima de impressão de preenchimento","em milímetros / minuto"],
+    fl_frat_l:      ["velocidade máxima de impressão de preenchimento","em milímetros / segundo"],
     fl_mult_s:      "fator de fluxo",
     fl_mult_l:      ["multiplicador de extrusão","0.0 - 2.0"],
     fl_sfac_s:      "fator de largura",
@@ -477,7 +477,7 @@ kiri.lang['pt-pt'] = {
     ou_powr_s:      "poder",
     ou_powr_l:      ["0 - 100","representa %"],
     ou_sped_s:      "velocidade",
-    ou_sped_l:      "milímetros/minuto",
+    ou_sped_l:      "milímetros/segundo",
     ou_mrgd_s:      "mesclado",
     ou_mrgd_l:      ["mesclar todas as camadas usando","codificação de cores para denotar","profundidade de empilhamento"],
     ou_grpd_s:      "agrupado",
@@ -495,11 +495,11 @@ kiri.lang['pt-pt'] = {
     ou_bedd_s:      "temperatura da cama",
     ou_bedd_l:      "graus em celsius",
     ou_feed_s:      "velocidade de impressão",
-    ou_feed_l:      ["velocidade máxima de impressão","milímetros/minuto"],
+    ou_feed_l:      ["velocidade máxima de impressão","milímetros/segundo"],
     ou_fini_s:      "velocidade de acabamento",
-    ou_fini_l:      ["velocidade do cartucho mais externo","milímetros/minuto"],
+    ou_fini_l:      ["velocidade do cartucho mais externo","milímetros/segundo"],
     ou_move_s:      "velocidade de movimento",
-    ou_move_l:      ["velocidade de movimento sem impressão","milímetros/minuto","0 = habilitar movimentos G0"],
+    ou_move_l:      ["velocidade de movimento sem impressão","milímetros/segundo","0 = habilitar movimentos G0"],
     ou_shml_s:      "fator de cartucho",
     ou_flml_s:      "fator sólido",
     ou_spml_s:      "fator de preenchimento",
@@ -577,7 +577,7 @@ kiri.lang['pt-pt'] = {
     ad_play_s:      "polir camadas",
     ad_play_l:      ["polir até o especificado","# de camadas de cada vez"],
     ad_pspd_s:      "velocidade de polimento",
-    ad_pspd_l:      ["velocidade de polimento","em milímetros/minuto"],
+    ad_pspd_l:      ["velocidade de polimento","em milímetros/segundo"],
 
     // CAM EXPERT
     cx_fast_s:      "pular sombra",