From ce63a176d7a7392614318693d9c85a058c2f7f0b Mon Sep 17 00:00:00 2001
From: Stewart Allen <stewart@neuron.com>
Date: Sat, 1 Sep 2018 11:32:23 -0400
Subject: [PATCH] change profile to be based on marlin

---
 web/kiri/filter/FDM/Ulio3D | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/web/kiri/filter/FDM/Ulio3D b/web/kiri/filter/FDM/Ulio3D
index 8a891263..1573a40e 100644
--- a/web/kiri/filter/FDM/Ulio3D
+++ b/web/kiri/filter/FDM/Ulio3D
@@ -1,23 +1,29 @@
 {
     "pre":[
-        "M83 ; extruder relative mode",
-        "M104 S160 ; set extruder to a temporary high enough temp",
-        "M140 S{bed_temp} ; set bed temp",
-        "M190 S{bed_temp} ; wait for bed temp",
-        "M109 S160 ; wait for extruder temporary high enough temp",
-        "G28 W ; home all without mesh bed level",
-        "G1 Y-3.0 F1000.0 ; go outside print area",
-        "M104 S{temp} ; set extruder actual required temp",
-        "M109 S{temp} ; wait for extruder actual required temp"
+        "M104 S{temp} T0     ; set extruder temperature",
+        "M140 S{bed_temp} T0 ; set bed temperature",
+        "G90                 ; set absolute positioning mode",
+        "M83                 ; set relative positioning for extruder",
+        "M107                ; turn off filament cooling fan",
+        "G28                 ; home axes",
+        "G29                 ; level bed",
+        "G92 X0 Y0 Z0 E0     ; reset all axes positions",
+        "G1 X0 Y0 Z0.25 F180 ; move xy to 0,0 and z 0.25mm over bed",
+        "G92 E0              ; zero the extruded",
+        "M190 S{bed_temp} T0 ; wait for bed to reach target temp",
+        "M109 S{temp} T0     ; wait for extruder to reach target temp",
+        "G1 E15 F200         ; purge 15mm from extruder",
+        "G92 E0              ; zero the extruded",
+        "G1 F225             ; set feed speed"
     ],
     "post":[
-        "G4 ; wait",
-        "M104 S0 ; turn off temperature",
-        "M140 S0 ; turn off heatbed",
-        "M107 ; turn off fan",
-        "G1 X0 Y0; home X axis",
-        "G1 E-1 F900",
-        "M84 ; disable motors"
+        "M107                ; turn off filament cooling fan",
+        "M104 S0 T0          ; turn off right extruder",
+        "M104 S0 T1          ; turn off left extruder",
+        "M140 S0 T0          ; turn off bed",
+        "G1 Z{z_max} F1200   ; drop bed",
+        "G28 X0 Y0           ; home XY axes",
+        "M84                 ; disable stepper motors"
     ],
     "cmd":{
         "fan_power": "M106 S200"