AI_Assistant/grid-apps-cmms
Watch
1
0
Fork
You've already forked grid-apps-cmms
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

reorder fdm menus, add solid fill sub-menu

Browse source
This commit is contained in:
Stewart Allen 2025-09-22 23:39:45 -04:00
commit bcadc9dfb9
4 changed files with 22 additions and 17 deletions
Download patch file Download diff file Expand all files Collapse all files

1
web/kiri/index.html
View file

@ -337,6 +337,7 @@
<!-- FDM -->
<div id="fdm-layers" class="set2-group mode-fdm"></div>
<div id="fdm-walls" class="set2-group mode-fdm"></div>
<div id="fdm-solid" class="set2-group mode-fdm"></div>
<div id="fdm-fill" class="set2-group mode-fdm"></div>
<div id="fdm-heat" class="set2-group mode-fdm"></div>
<div id="fdm-cool" class="set2-group mode-fdm"></div>

21
web/kiri/lang/en.js
View file

@ -332,14 +332,14 @@ self.lang['en-us'] = {
se_save: "save",
// FDM LAYERS
sl_menu: "paths",
sl_menu: "layers",
sl_angl_s: "slice angle",
sl_angl_l: ["slice angle bias in degrees"],
sl_lahi_s: "layer height",
sl_lahi_l: ["height of each slice","layer in millimeters"],
ad_minl_s: "layer minimum",
ad_minl_l: ["adaptive min layer height","in millimeters","must be non-zero"],
ad_adap_s: "adaptive",
ad_adap_s: "adaptive height",
ad_adap_l: ["use adaptive layer heights","with 'layer height' as max","and 'layer min' as the min"],
sl_ltop_s: "top layers",
sl_ltop_l: ["number of solid layers at the top of the print or on flat areas facing up"],
@ -363,6 +363,15 @@ self.lang['en-us'] = {
sl_strt_s: "layer start",
sl_strt_l: ["layer starting point","last = last layer end","center = part center","origin = device origin"],
// FDM SOLID
fs_menu: "solid fill",
fi_over_s: "shell overlap",
fi_over_l: ["overlap with shell and other fill","for improved extrusion bonding","as fraction of nozzle diameter","0.0 - 2.0"],
fi_angl_s: "start angle",
fi_angl_l: ["starting angle in degrees","90 degrees added to ","each following layer","applies only to solid layers"],
fi_grow_s: "area expand",
fi_grow_l: ["expand projected solids","can help with solid areas","over sparse infill areas","units in millimeters"],
// FDM FILL
fi_menu: "sparse fill",
fi_type: "fill type",
@ -370,12 +379,6 @@ self.lang['en-us'] = {
fi_pcnt_l: ["fill density values","0.0 - 1.0"],
fi_rept_s: "fill repeat",
fi_rept_l: ["number of times to repeat","unchanged fill layers"],
fi_angl_s: "solid angle",
fi_angl_l: ["starting angle in degrees","90 degrees added to ","each following layer","applies only to solid layers"],
fi_grow_s: "solid expand",
fi_grow_l: ["expand projected solids","can help with solid areas","over sparse infill areas","units in millimeters"],
fi_over_s: "fill overlap",
fi_over_l: ["overlap with shell and other fill","for improved extrusion bonding","as fraction of nozzle diameter","0.0 - 2.0"],
// fi_rate_s: "print speed",
fi_rate_l: ["extrusion speed for infill","set to 0 to use default","output print speeds"],
@ -855,7 +858,7 @@ self.lang['en-us'] = {
ad_rdwl_l: ["time between re-engaging","filament and movement","in milliseconds"],
ad_scst_s: "shell coast",
ad_scst_l: ["non-printing end","of perimeter shells","in millimeters"],
ad_msol_s: "min solid",
ad_msol_s: "min area",
ad_msol_l: ["minimum area (mm^2)","required to keep solid","must be > 0.1"],
ad_mins_s: "min speed",
ad_mins_l: ["minimum speed","for short segments"],