diff --git a/src/kiri-dev/fdm/ULIO.3D.BRIX b/src/kiri-dev/fdm/ULIO.3D.BRIX
index 0211889f..e9a7489f 100644
--- a/src/kiri-dev/fdm/ULIO.3D.BRIX
+++ b/src/kiri-dev/fdm/ULIO.3D.BRIX
@@ -14,7 +14,9 @@
     "gcodeFan": [
         "M106 S{fan_speed}"
     ],
-    "gcodeFeature": [],
+    "gcodeFeature": [
+        "M73 P{progress}"
+    ],
     "gcodeTrack": [],
     "gcodeLayer": [],
     "gcodePre": [
@@ -54,7 +56,7 @@
     "filamentSource": "direct",
     "profiles": [
         {
-            "processName": "ULIO 3D BRIX_PLA",
+            "processName": "ULIO 3D BRIX PLA",
             "sliceHeight": 0.25,
             "sliceShells": 3,
             "sliceShellOrder": "in-out",
@@ -141,4 +143,4 @@
             "outputFanLayer": 5
         }
     ]
-}
\ No newline at end of file
+}
diff --git a/src/kiri-dev/fdm/ULIO.3D.STEAM b/src/kiri-dev/fdm/ULIO.3D.STEAM
new file mode 100644
index 00000000..1b37fc12
--- /dev/null
+++ b/src/kiri-dev/fdm/ULIO.3D.STEAM
@@ -0,0 +1,148 @@
+{
+    "mode": "FDM",
+    "internal": 0,
+    "imageURL": "",
+    "bedHeight": 2.5,
+    "bedWidth": 100,
+    "bedDepth": 100,
+    "bedRound": false,
+    "bedBelt": false,
+    "deviceZMax": 0,
+    "gcodeTime": 1,
+    "maxHeight": 55,
+    "originCenter": false,
+    "gcodeFan": [
+        "M106 S{fan_speed}"
+    ],
+    "gcodeFeature": [
+        "M73 P{progress}"
+    ],
+    "gcodeTrack": [],
+    "gcodeLayer": [],
+    "gcodePre": [
+        "G90            ; use absolute coordinates",
+        "M83            ; extruder relative mode",
+        "M104 S{temp}   ; set extruder temp",
+        "M109 S{temp}   ; wait for extruder temp",
+        "G28 W          ; home all without mesh bed level",
+        "G92 E0.0",
+        "G1 F{600} ",
+        "M117 ULIO 3D STEAM Printing"
+    ],
+    "gcodePost": [
+        "M104 S0        ; turn off right extruder",
+        "M107           ; turn off filament cooling fan",
+        "G1 Z55 F{180}  ; drop bed G1 55 mm ",
+        "G28 X0 Y0      ; home XY axes",
+        "M84            ; disable stepper motors"
+    ],
+    "gcodeProc": "",
+    "gcodeFExt": "gcode",
+    "extruders": [
+        {
+            "extFilament": 1.75,
+            "extNozzle": 0.4,
+            "extSelect": [
+                "T0"
+            ],
+            "extDeselect": [],
+            "extOffsetX": 0,
+            "extOffsetY": 0
+        }
+    ],
+    "new": false,
+    "deviceName": "ULIO 3D STEAM",
+    "fwRetract": false,
+    "filamentSource": "direct",
+    "profiles": [
+        {
+            "processName": "ULIO 3D STEAM PLA",
+            "sliceHeight": 0.25,
+            "sliceShells": 3,
+            "sliceShellOrder": "in-out",
+            "sliceLayerStart": "center",
+            "sliceFillAngle": 45,
+            "sliceFillOverlap": 0.35,
+            "sliceFillSparse": 0.25,
+            "sliceFillType": "grid",
+            "sliceAdaptive": false,
+            "sliceMinHeight": 0,
+            "sliceSupportDensity": 0.25,
+            "sliceSupportOffset": 0.5,
+            "sliceSupportGap": 1,
+            "sliceSupportSize": 5,
+            "sliceSupportArea": 0.25,
+            "sliceSupportExtra": 0,
+            "sliceSupportAngle": 45,
+            "sliceSupportNozzle": 0,
+            "sliceSolidMinArea": 1,
+            "sliceBottomLayers": 3,
+            "sliceTopLayers": 5,
+            "firstLayerRate": 20,
+            "firstLayerPrintMult": 1,
+            "firstLayerYOffset": 0,
+            "firstLayerBrim": 0,
+            "firstLayerBeltLead": 200,
+            "firstLayerFanSpeed": 0,
+            "outputTemp": 215,
+            "outputBedTemp": 0,
+            "outputFanSpeed": 255,
+            "outputFeedrate": 35,
+            "outputFinishrate": 20,
+            "outputSeekrate": 35,
+            "outputShellMult": 1.05,
+            "outputFillMult": 1.1,
+            "outputSparseMult": 1.1,
+            "outputRetractDist": 3.2,
+            "outputRetractSpeed": 80,
+            "outputRetractWipe": 2,
+            "outputRetractDwell": 0,
+            "outputShortPoly": 50,
+            "outputMinSpeed": 1,
+            "outputCoastDist": 0,
+            "outputLayerRetract": false,
+            "zHopDistance": 0,
+            "antiBacklash": 0,
+            "sliceFillWidth": 1,
+            "sliceFillRate": 0,
+            "sliceSupportEnable": false,
+            "firstSliceHeight": 0.25,
+            "firstLayerFillRate": 20,
+            "firstLayerLineMult": 1,
+            "firstLayerNozzleTemp": 0,
+            "firstLayerBedTemp": 0,
+            "firstLayerBrimTrig": 0,
+            "firstLayerBrimGap": 0,
+            "outputRaft": true,
+            "outputRaftSpacing": 0.2,
+            "outputBrimCount": 5,
+            "outputBrimOffset": 2,
+            "outputPurgeTower": 0,
+            "outputInvertX": false,
+            "outputInvertY": false,
+            "arcTolerance": 0,
+            "ranges": [],
+            "outputLoops": 0,
+            "firstLayerBrimIn": 0,
+            "firstLayerBeltBump": 0,
+            "outputBeltFirst": false,
+            "sliceFillRepeat": 4,
+            "sliceLineWidth": 0,
+            "sliceSupportSpan": 5,
+            "sliceSupportOutline": false,
+            "firstLayerFlatten": 0,
+            "outputDraftShield": false,
+            "outputAvoidGaps": true,
+            "sliceDetectThin": "off",
+            "sliceLayerStartX": 0,
+            "sliceLayerStartY": 0,
+            "sliceFillGrow": 0,
+            "sliceSolidRate": 0,
+            "sliceSupportGrow": 0,
+            "outputAlternating": false,
+            "outputFanLayer": 5,
+            "sliceAngle": 45,
+            "outputNozzle": 0
+        }
+    ]
+}