remove gcode int/ext macros (unused) and repurpose type system to identify features in gcode output

src/kiri-mode/fdm/export.js

@@ -26,8 +26,6 @@
             gcodeFan = device.gcodeFan,
             gcodeLayer = device.gcodeLayer,
             gcodeTrack = device.gcodeTrack,
-            gcodeExt = device.gcodeExt,
-            gcodeInt = device.gcodeInt,
             zMoveMax = device.deviceZMax || 0,
             tool = 0,
             fwRetract = device.fwRetract,
@@ -576,16 +574,9 @@
                     }
                 }
 
-                // emit gcode macro for changed print region
+                // emit comment on output type chage
                 if (last && out.type !== last.type) {
-                    switch (out.type) {
+                    append(`; feature ${out.type}`);
-                        case 'ext':
-                            appendAllSub(gcodeExt);
-                            break;
-                        case 'int':
-                            appendAllSub(gcodeInt);
-                            break;
-                    }
                     lastType = out.type;
                 }
 

src/kiri-mode/fdm/prepare.js

@@ -164,6 +164,8 @@
                     z: firstLayerHeight / 2
                 });
 
+                print.setType('brim');
+
                 // output brim points
                 let brimStart = offset < nozzle * 2 ? newPoint(-bedWidth, -bedDepth, 0) : printPoint;
                 printPoint = print.poly2polyEmit(polys, brimStart, (poly, index, count, startPoint) => {
@@ -345,6 +347,7 @@
             let wipe = true;
             lastPurgeTool = tool;
             if (rec) {
+                print.setType('purge tower');
                 if (layer.last()) {
                     layer.last().retract = true;
                 }
@@ -513,6 +516,7 @@
                 let wtb = slice.widget.track.box;
                 let beltStart = slice.belt && slice.belt.touch;// && (widgets.length === 1);
                 // output seek to start point between mesh slices if previous data
+                print.setType('layer');
                 printPoint = print.slicePrintPath(
                     slice,
                     beltStart ? newPoint(-5000, 5000, 0) : printPoint.sub(offset),

src/kiri/conf.js

@@ -127,8 +127,6 @@
             gcodeLayer: valueOf(cmd.layer || code.layer, []),
             gcodePre: valueOf(code.pre, []),
             gcodePost: valueOf(code.post, []),
-            gcodeExt: valueOf(code.ext, []),
-            gcodeInt: valueOf(code.int, []),
             // post processor script of which only one exists
             // for XYZ.daVinci.Mini.w triggered in kiri.export
             // in the fdm driver to turn gcode into base64
@@ -287,8 +285,6 @@
                     maxHeight: 150,
                     gcodePre: [],
                     gcodePost: [],
-                    gcodeExt: [],
-                    gcodeInt: [],
                     gcodeProc: "",
                     gcodeFan: [],
                     gcodeTrack: [],

src/kiri/init.js

@@ -791,8 +791,6 @@
                 UI.deviceName,
                 UI.gcodePre,
                 UI.gcodePost,
-                UI.gcodeExt,
-                UI.gcodeInt,
                 UI.bedDepth,
                 UI.bedWidth,
                 UI.maxHeight,
@@ -1685,8 +1683,6 @@
                 (UI.gcodeLayer = UC.newGCode(LANG.dv_layr_s, {title:LANG.dv_layr_l, modes:FDM, area:gcode})).button,
                 (UI.gcodeTrack = UC.newGCode(LANG.dv_prog_s, {title:LANG.dv_prog_l, modes:FDM, area:gcode})).button,
                 (UI.gcodeFan = UC.newGCode(LANG.dv_fanp_s, {title:LANG.dv_fanp_l, modes:FDM, area:gcode})).button,
-                (UI.gcodeExt = UC.newGCode(LANG.dv_pext_s, {title:LANG.dv_pext_l, modes:FDM, area:gcode, show:isDanger})).button,
-                (UI.gcodeInt = UC.newGCode(LANG.dv_pint_s, {title:LANG.dv_pint_l, modes:FDM, area:gcode, show:isDanger})).button,
                 (UI.gcodeLaserOn = UC.newGCode(LANG.dv_lzon_s, {title:LANG.dv_lzon_l, modes:LASER, area:gcode})).button,
                 (UI.gcodeLaserOff = UC.newGCode(LANG.dv_lzof_s, {title:LANG.dv_lzof_l, modes:LASER, area:gcode})).button,
                 (UI.gcodeChange = UC.newGCode(LANG.dv_tool_s, {title:LANG.dv_tool_l, modes:CAM, area:gcode})).button,

src/kiri/print.js

@@ -48,6 +48,7 @@
         this.id = id || new Date().getTime().toString(36);
         this.settings = settings;
         this.widgets = widgets;
+        this.setType = setType;
         debugE = settings ? (settings.controller.devel ? 1 : 0) : 0;
     }
 
@@ -1068,6 +1069,7 @@
         let lastTop = null;
         outputOrderClosest(out, function(next) {
             if (next instanceof Polygon) {
+                setType('support');
                 // support polygon
                 next.setZ(z);
                 outputTraces([next].appendAll(next.inner || []));
@@ -1076,6 +1078,7 @@
                     outputFills(next.fill, {fast: true});
                 }
             } else {
+                setType('shells');
                 if (lastTop && lastTop !== next) {
                     retract();
                 }
@@ -1099,9 +1102,6 @@
                     }
                 }
 
-                // flag extrusion type as exterior
-                setType('ext');
-
                 // innermost shells
                 let inner = next.innerShells() || [];
 
@@ -1113,14 +1113,15 @@
                 // output outer polygons
                 if (shellOrder === -1) outputTraces(inner, { sort: shellOrder });
 
-                // flag extrusion type as interior
-                setType('int');
-
                 // output thin fill
+                setType('thin fill');
                 outputThin(next.thin_fill);
 
                 // then output solid and sparse fill
+                setType('solid fill');
                 outputFills(next.fill_lines, {flow: solidWidth});
+
+                setType('sparse infill');
                 outputSparse(next.fill_sparse, sparseMult, infillSpeed);
 
                 lastTop = next;