AI_Assistant/grid-apps-cmms
Watch
1
0
Fork
You've already forked grid-apps-cmms
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

update jellybox profiles

Browse source
This commit is contained in:
Stewart Allen 2024-05-06 09:41:17 -04:00
commit 9a8955e4eb
8 changed files with 963 additions and 1095 deletions
Download patch file Download diff file Expand all files Collapse all files

191
src/kiri-dev/fdm/IMADE3D.JellyBOX.2.N0.4 Normal file
View file

@ -0,0 +1,191 @@
{
"deviceName": "IMADE3D JellyBOX 2 N0.4",
"bedWidth": 177,
"bedDepth": 155,
"maxHeight": 140,
"mode": "FDM",
"new": false,
"internal": 0,
"imageURL": "",
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"deviceZMax": 0,
"originCenter": false,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";============================",
"; Jellybox Start Script Begin ",
";============================",
"; for slicer: Kiri:Moto",
"; modified 2024-02-01. by LG",
";",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M190 S45 ;wait for the bed to reach 45C (for bed leveling)",
"M109 S180 ;wait for the extruder to reach 180C (for bed leveling)",
";",
"; === Homing and bed leveling (if necessary)",
";",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; ",
"; === Purge 30mm of the filament",
";",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G92 E0 ;to reset extruder position to 0 after finished previous print",
"G1 E30 F200 ;extrude 30mm of feed stock",
"G92 E0 ;reset the extruder position Z is 0 again.",
";",
";===================================",
"; Jellybox Printer Start Script End",
";==================================="
],
"gcodePost": [
";---------------------------------",
";;; Jellybox End Script Begin ;;;",
";_________________________________",
"; end gcode last modified 2022-01-13",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";---------------------------------------",
";;; Jellybox End Script End ;;;",
";_______________________________________"
],
"gcodeProc": "",
"gcodeFExt": "gcode",
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.4,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "JB2 PLA - N0.4 L0.3 T210",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 215,
"firstLayerBedTemp": 60,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputBedTemp": 60,
"outputFanSpeed": 130,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 1.8,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0.2,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off",
"sliceLayerStartX": 0,
"sliceLayerStartY": 0,
"sliceSupportGrow": 0,
"outputAlternating": false
}
],
"filamentSource": "direct",
"gcodeTime": 1,
"gcodeFeature": []
}

192
src/kiri-dev/fdm/IMADE3D.JellyBOX.3.N0.4 Normal file
View file

@ -0,0 +1,192 @@
{
"deviceName": "IMADE3D JellyBOX 3 N0.4",
"bedWidth": 180,
"bedDepth": 165,
"maxHeight": 140,
"mode": "FDM",
"new": false,
"internal": 0,
"imageURL": "",
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"deviceZMax": 0,
"originCenter": false,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";============================",
"; Jellybox Start Script Begin ",
";============================",
"; for slicer: Kiri:Moto",
"; modified 2024-02-01. by LG",
";",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M190 S45 ;wait for the bed to reach 45C (for bed leveling)",
"M109 S180 ;wait for the extruder to reach 180C (for bed leveling)",
";",
"; === Homing and bed leveling (if necessary)",
";",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; ",
"; === Purge 30mm of the filament",
";",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G92 E0 ;to reset extruder position to 0 after finished previous print",
"G1 E30 F200 ;extrude 30mm of feed stock",
"G92 E0 ;reset the extruder position Z is 0 again.",
";",
";===================================",
"; Jellybox Printer Start Script End",
";==================================="
],
"gcodePost": [
";============================",
"; Jellybox End Script Begin ",
";============================",
"; modified 2024-02-01",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"G92 E0 ;reset the extruder position Z to 0",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";=========================",
"; Jellybox End Script End ",
";========================="
],
"gcodeProc": "",
"gcodeFExt": "gcode",
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.4,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "JB3 PLA - N0.4 L0.3 T210",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 215,
"firstLayerBedTemp": 60,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputBedTemp": 60,
"outputFanSpeed": 130,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 1.8,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0.2,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off",
"sliceLayerStartX": 0,
"sliceLayerStartY": 0,
"sliceSupportGrow": 0,
"outputAlternating": false
}
],
"filamentSource": "direct",
"gcodeTime": 1,
"gcodeFeature": []
}

192
src/kiri-dev/fdm/IMADE3D.JellyBOX.4.N0.4 Normal file
View file

@ -0,0 +1,192 @@
{
"deviceName": "IMADE3D JellyBOX 4 N0.4",
"bedWidth": 180,
"bedDepth": 165,
"maxHeight": 150,
"mode": "FDM",
"new": false,
"internal": 0,
"imageURL": "",
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"deviceZMax": 0,
"originCenter": false,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";============================",
"; Jellybox Start Script Begin ",
";============================",
"; for slicer: Kiri:Moto",
"; modified 2024-02-01. by LG",
";",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M190 S45 ;wait for the bed to reach 45C (for bed leveling)",
"M109 S180 ;wait for the extruder to reach 180C (for bed leveling)",
";",
"; === Homing and bed leveling (if necessary)",
";",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; ",
"; === Purge 30mm of the filament",
";",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G92 E0 ;to reset extruder position to 0 after finished previous print",
"G1 E30 F200 ;extrude 30mm of feed stock",
"G92 E0 ;reset the extruder position Z is 0 again.",
";",
";===================================",
"; Jellybox Printer Start Script End",
";==================================="
],
"gcodePost": [
";============================",
"; Jellybox End Script Begin ",
";============================",
"; modified 2024-02-01",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"G92 E0 ;reset the extruder position Z to 0",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";=========================",
"; Jellybox End Script End ",
";========================="
],
"gcodeProc": "",
"gcodeFExt": "gcode",
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.4,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "JB4 PLA - N0.4 L0.3 T215",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 215,
"firstLayerBedTemp": 60,
"firstLayerRate": 40,
"firstLayerFillRate": 30,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 215,
"outputBedTemp": 60,
"outputFanSpeed": 200,
"outputFeedrate": 70,
"outputFinishrate": 35,
"outputSeekrate": 120,
"outputShellMult": 1.15,
"outputFillMult": 1.15,
"outputSparseMult": 1.3,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 1.8,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0.3,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.4,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": false,
"firstSliceHeight": 0.3,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off",
"sliceLayerStartX": 0,
"sliceLayerStartY": 0,
"sliceSupportGrow": 0,
"outputAlternating": false
}
],
"filamentSource": "direct",
"gcodeTime": 1,
"gcodeFeature": []
}

197
src/kiri-dev/fdm/IMADE3D.JellyBOX.4.N0.6 Normal file
View file

@ -0,0 +1,197 @@
{
"deviceName": "IMADE3D JellyBOX 4 N0.6",
"bedWidth": 180,
"bedDepth": 165,
"maxHeight": 150,
"mode": "FDM",
"new": false,
"internal": 0,
"imageURL": "",
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"deviceZMax": 0,
"originCenter": false,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";============================",
"; Jellybox Start Script Begin ",
";============================",
"; for slicer: Kiri:Moto",
"; modified 2024-02-01. by LG",
";",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M190 S45 ;wait for the bed to reach 45C (for bed leveling)",
"M109 S180 ;wait for the extruder to reach 180C (for bed leveling)",
";",
"; === Homing and bed leveling (if necessary)",
";",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; ",
"; === Purge 30mm of the filament",
";",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G92 E0 ;to reset extruder position to 0 after finished previous print",
"G1 E30 F200 ;extrude 30mm of feed stock",
"G92 E0 ;reset the extruder position Z is 0 again.",
";",
"; === Print front line",
";",
";G0 Z0.2 ; move Z 0.3mm above bed",
";G1 X160 E30 F1000 ; intro line ",
";G92 E0 ;reset the extruder position Z is 0 again.",
";===================================",
"; Jellybox Printer Start Script End",
";==================================="
],
"gcodePost": [
";============================",
"; Jellybox End Script Begin ",
";============================",
"; modified 2024-02-01",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"G92 E0 ;reset the extruder position Z to 0",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";=========================",
"; Jellybox End Script End ",
";========================="
],
"gcodeProc": "",
"gcodeFExt": "gcode",
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.6,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "JB4 PLA - N0.6 L0.3 T220",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0.1,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 220,
"firstLayerBedTemp": 65,
"firstLayerRate": 40,
"firstLayerFillRate": 50,
"firstLayerPrintMult": 1,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 220,
"outputBedTemp": 60,
"outputFanSpeed": 200,
"outputFeedrate": 60,
"outputFinishrate": 30,
"outputSeekrate": 100,
"outputShellMult": 1.1,
"outputFillMult": 1.1,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 2.4,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": false,
"zHopDistance": 0.3,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.6,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.3,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off",
"sliceLayerStartX": 0,
"sliceLayerStartY": 0,
"sliceSupportGrow": 0,
"outputAlternating": false
}
],
"filamentSource": "direct",
"gcodeTime": 1,
"gcodeFeature": []
}

365
src/kiri-dev/fdm/IMADE3D.JellyBOX.Original
View file

@ -1,365 +0,0 @@
{
"deviceName": "IMADE3D JellyBOX Original nzl-0.4",
"bedWidth": 170,
"bedDepth": 145,
"maxHeight": 140,
"mode": "FDM",
"new": false,
"noclone": false,
"internal": 0,
"imageURL": "",
"imageScale": 0.75,
"imageAnchor": 0,
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"resolutionX": 1600,
"resolutionY": 900,
"deviceZMax": 0,
"originCenter": false,
"extrudeAbs": false,
"spindleMax": 0,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";---------------------------------------",
"; ; ; Jellybox Start Script Begin ; ; ;",
";_______________________________________",
"; for slicer: Kiri",
"; start gcode last modified 2022-04-08",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M117 Preparing ;write Preparing",
"M190 S45 ;wait for the bed to reach 45C",
"M109 S180 ;wait for the extruder to reach 180C",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; M300 S440 P300 ;play a tone",
"; M0 Click to start print ; optional, recommended only with a rotary encoder",
"M117 Print starting ;write Print starting",
";================ ;PRINT:PURGE start",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G1 E45 F200 ;extrude __mm of feed stock",
"G92 E0 ;reset the extruder position",
";---------------------------------------------",
"; ; ; Jellybox Printer Start Script End ; ; ;",
";_____________________________________________"
],
"gcodePost": [
";---------------------------------",
";;; Jellybox End Script Begin ;;;",
";_________________________________",
"; end gcode last modified 2022-01-13",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";---------------------------------------",
";;; Jellybox End Script End ;;;",
";_______________________________________"
],
"gcodeExt": [],
"gcodeInt": [],
"gcodeProc": "",
"gcodeDwell": [],
"gcodeSpindle": [],
"gcodeChange": [],
"gcodeFExt": "gcode",
"gcodeSpace": true,
"gcodeStrip": false,
"gcodeLaserOn": [],
"gcodeLaserOff": [],
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.4,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "PLA - L0.3 T210 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 215,
"firstLayerBedTemp": 60,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputBedTemp": 60,
"outputFanSpeed": 130,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 1.8,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off"
},
{
"processName": "PETG - L0.3 T235 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 235,
"firstLayerBedTemp": 70,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 235,
"outputBedTemp": 70,
"outputFanSpeed": 75,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 2,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off"
},
{
"processName": "FLEX - L0.3 T235 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 238,
"firstLayerBedTemp": 55,
"firstLayerRate": 10,
"firstLayerFillRate": 10,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 235,
"outputBedTemp": 55,
"outputFanSpeed": 75,
"outputFeedrate": 15,
"outputFinishrate": 10,
"outputSeekrate": 80,
"outputShellMult": 1.2,
"outputFillMult": 1.2,
"outputSparseMult": 1.4,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 0.5,
"outputRetractSpeed": 20,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 1,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 15,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 10,
"sliceDetectThin": "off"
}
]
}

191
src/kiri-dev/fdm/IMADE3D.JellyBOX.Original.N0.4 Normal file
View file

@ -0,0 +1,191 @@
{
"deviceName": "IMADE3D JellyBOX Original N0.4",
"bedWidth": 170,
"bedDepth": 145,
"maxHeight": 140,
"mode": "FDM",
"new": false,
"internal": 0,
"imageURL": "",
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"deviceZMax": 0,
"originCenter": false,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";============================",
"; Jellybox Start Script Begin ",
";============================",
"; for slicer: Kiri:Moto",
"; modified 2024-02-01. by LG",
";",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M190 S45 ;wait for the bed to reach 45C (for bed leveling)",
"M109 S180 ;wait for the extruder to reach 180C (for bed leveling)",
";",
"; === Homing and bed leveling (if necessary)",
";",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; ",
"; === Purge 30mm of the filament",
";",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G92 E0 ;to reset extruder position to 0 after finished previous print",
"G1 E30 F200 ;extrude 30mm of feed stock",
"G92 E0 ;reset the extruder position Z is 0 again.",
";",
";===================================",
"; Jellybox Printer Start Script End",
";==================================="
],
"gcodePost": [
";---------------------------------",
";;; Jellybox End Script Begin ;;;",
";_________________________________",
"; end gcode last modified 2022-01-13",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";---------------------------------------",
";;; Jellybox End Script End ;;;",
";_______________________________________"
],
"gcodeProc": "",
"gcodeFExt": "gcode",
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.4,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "JB1 PLA - N0.4 L0.3 T210",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 215,
"firstLayerBedTemp": 60,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputBedTemp": 60,
"outputFanSpeed": 130,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 1.8,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0.2,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off",
"sliceLayerStartX": 0,
"sliceLayerStartY": 0,
"sliceSupportGrow": 0,
"outputAlternating": false
}
],
"filamentSource": "direct",
"gcodeTime": 1,
"gcodeFeature": []
}

365
src/kiri-dev/fdm/IMADE3D.JellyBOX2
View file

@ -1,365 +0,0 @@
{
"deviceName": "IMADE3D JellyBOX2 nzl-0.4",
"bedWidth": 177,
"bedDepth": 155,
"maxHeight": 140,
"mode": "FDM",
"new": false,
"noclone": false,
"internal": 0,
"imageURL": "",
"imageScale": 0.75,
"imageAnchor": 0,
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"resolutionX": 1600,
"resolutionY": 900,
"deviceZMax": 0,
"originCenter": false,
"extrudeAbs": false,
"spindleMax": 0,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";---------------------------------------",
"; ; ; Jellybox Start Script Begin ; ; ;",
";_______________________________________",
"; for slicer: Kiri",
"; start gcode last modified 2022-04-08",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M117 Preparing ;write Preparing",
"M190 S45 ;wait for the bed to reach 45C",
"M109 S180 ;wait for the extruder to reach 180C",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; M300 S440 P300 ;play a tone",
"; M0 Click to start print ; optional, recommended only with a rotary encoder",
"M117 Print starting ;write Print starting",
";================ ;PRINT:PURGE start",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G1 E45 F200 ;extrude __mm of feed stock",
"G92 E0 ;reset the extruder position",
";---------------------------------------------",
"; ; ; Jellybox Printer Start Script End ; ; ;",
";_____________________________________________"
],
"gcodePost": [
";---------------------------------",
";;; Jellybox End Script Begin ;;;",
";_________________________________",
"; end gcode last modified 2022-01-13",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";---------------------------------------",
";;; Jellybox End Script End ;;;",
";_______________________________________"
],
"gcodeExt": [],
"gcodeInt": [],
"gcodeProc": "",
"gcodeDwell": [],
"gcodeSpindle": [],
"gcodeChange": [],
"gcodeFExt": "gcode",
"gcodeSpace": true,
"gcodeStrip": false,
"gcodeLaserOn": [],
"gcodeLaserOff": [],
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.4,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "PLA - L0.3 T210 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 215,
"firstLayerBedTemp": 60,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputBedTemp": 60,
"outputFanSpeed": 130,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 1.8,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off"
},
{
"processName": "PETG - L0.3 T235 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 235,
"firstLayerBedTemp": 70,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 235,
"outputBedTemp": 70,
"outputFanSpeed": 75,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 2,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off"
},
{
"processName": "FLEX - L0.3 T235 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 238,
"firstLayerBedTemp": 55,
"firstLayerRate": 10,
"firstLayerFillRate": 10,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 235,
"outputBedTemp": 55,
"outputFanSpeed": 75,
"outputFeedrate": 15,
"outputFinishrate": 10,
"outputSeekrate": 80,
"outputShellMult": 1.2,
"outputFillMult": 1.2,
"outputSparseMult": 1.4,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 0.5,
"outputRetractSpeed": 20,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 1,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 15,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 10,
"sliceDetectThin": "off"
}
]
}

365
src/kiri-dev/fdm/IMADE3D.JellyBOX3
View file

@ -1,365 +0,0 @@
{
"deviceName": "IMADE3D JellyBOX3 nzl-0.4",
"bedWidth": 180,
"bedDepth": 165,
"maxHeight": 140,
"mode": "FDM",
"new": false,
"noclone": false,
"internal": 0,
"imageURL": "",
"imageScale": 0.75,
"imageAnchor": 0,
"bedHeight": 2.5,
"bedRound": false,
"bedBelt": false,
"resolutionX": 1600,
"resolutionY": 900,
"deviceZMax": 0,
"originCenter": false,
"extrudeAbs": false,
"spindleMax": 0,
"gcodeFan": [
"M106 S{fan_speed}"
],
"gcodeTrack": [
"M117 {progress}% layer {layer} / {layers}"
],
"gcodeLayer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
],
"gcodePre": [
";---------------------------------------",
"; ; ; Jellybox Start Script Begin ; ; ;",
";_______________________________________",
"; for slicer: Kiri",
"; start gcode last modified 2022-04-08",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M117 Preparing ;write Preparing",
"M190 S45 ;wait for the bed to reach 45C",
"M109 S180 ;wait for the extruder to reach 180C",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z5 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; M300 S440 P300 ;play a tone",
"; M0 Click to start print ; optional, recommended only with a rotary encoder",
"M117 Print starting ;write Print starting",
";================ ;PRINT:PURGE start",
"G90 ;absolute positioning",
"M400 ;make sure all is finished",
"G1 E45 F200 ;extrude __mm of feed stock",
"G92 E0 ;reset the extruder position",
";---------------------------------------------",
"; ; ; Jellybox Printer Start Script End ; ; ;",
";_____________________________________________"
],
"gcodePost": [
";---------------------------------",
";;; Jellybox End Script Begin ;;;",
";_________________________________",
"; end gcode last modified 2022-01-13",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2000 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";---------------------------------------",
";;; Jellybox End Script End ;;;",
";_______________________________________"
],
"gcodeExt": [],
"gcodeInt": [],
"gcodeProc": "",
"gcodeDwell": [],
"gcodeSpindle": [],
"gcodeChange": [],
"gcodeFExt": "gcode",
"gcodeSpace": true,
"gcodeStrip": false,
"gcodeLaserOn": [],
"gcodeLaserOff": [],
"extruders": [
{
"extFilament": 1.75,
"extNozzle": 0.4,
"extSelect": [
"T0"
],
"extDeselect": [],
"extOffsetX": 0,
"extOffsetY": 0
}
],
"fwRetract": false,
"profiles": [
{
"processName": "PLA - L0.3 T210 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 215,
"firstLayerBedTemp": 60,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputBedTemp": 60,
"outputFanSpeed": 130,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 1.8,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off"
},
{
"processName": "PETG - N0.4 L0.3 T235 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 235,
"firstLayerBedTemp": 70,
"firstLayerRate": 20,
"firstLayerFillRate": 25,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 235,
"outputBedTemp": 70,
"outputFanSpeed": 75,
"outputFeedrate": 45,
"outputFinishrate": 20,
"outputSeekrate": 80,
"outputShellMult": 1.05,
"outputFillMult": 1.05,
"outputSparseMult": 1.2,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 2,
"outputRetractSpeed": 40,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 0,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 0,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 0,
"sliceDetectThin": "off"
},
{
"processName": "FLEX - L0.3 T235 N0.4",
"sliceHeight": 0.3,
"sliceShells": 2,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.25,
"sliceFillSparse": 0.1,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 3,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 238,
"firstLayerBedTemp": 55,
"firstLayerRate": 10,
"firstLayerFillRate": 10,
"firstLayerPrintMult": 1.2,
"firstLayerLineMult": 1,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 235,
"outputBedTemp": 55,
"outputFanSpeed": 75,
"outputFeedrate": 15,
"outputFinishrate": 10,
"outputSeekrate": 80,
"outputShellMult": 1.2,
"outputFillMult": 1.2,
"outputSparseMult": 1.4,
"outputBrimCount": 5,
"outputBrimOffset": 5,
"outputRetractDist": 0.5,
"outputRetractSpeed": 20,
"outputRetractWipe": 0.8,
"outputRetractDwell": 10,
"outputShortPoly": 50,
"outputMinSpeed": 10,
"outputCoastDist": 0.4,
"outputLayerRetract": true,
"zHopDistance": 1,
"antiBacklash": 0,
"outputOriginCenter": false,
"sliceLineWidth": 0.45,
"sliceFillRepeat": 1,
"sliceFillRate": 15,
"sliceSupportSpan": 5,
"sliceSupportEnable": false,
"sliceSupportOutline": true,
"firstSliceHeight": 0.2,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBrimIn": 0,
"firstLayerBrimTrig": 0,
"firstLayerBrimGap": 0,
"firstLayerBeltLead": 3,
"firstLayerBeltBump": 0,
"firstLayerFlatten": 0,
"outputPurgeTower": 0,
"outputBeltFirst": false,
"outputLoops": 0,
"outputInvertX": false,
"outputInvertY": false,
"arcTolerance": 0.15,
"ranges": [],
"outputDraftShield": false,
"outputAvoidGaps": true,
"sliceFillGrow": 0,
"sliceSolidRate": 10,
"sliceDetectThin": "off"
}
]
}