add prusa MK3S profile

app.js

@@ -367,6 +367,7 @@ function initModule(mod, file, dir) {
             addCORS: addCorsHeaders,
             redirect: http.redirect,
             reply404: http.reply404,
+            decodePost: http.decodePost,
             reply: quickReply
         },
         ws: {

src/kiri-dev/fdm/Prusa.i3.MK3S+

@@ -0,0 +1,179 @@
+{
+    "noclone": false,
+    "mode": "FDM",
+    "internal": 0,
+    "imageURL": "",
+    "imageScale": 0.75,
+    "imageAnchor": 0,
+    "bedHeight": 2.5,
+    "bedWidth": 250,
+    "bedDepth": 210,
+    "bedRound": false,
+    "bedBelt": false,
+    "resolutionX": 1600,
+    "resolutionY": 900,
+    "deviceZMax": 0,
+    "maxHeight": 210,
+    "originCenter": false,
+    "extrudeAbs": false,
+    "spindleMax": 0,
+    "gcodeFan": [
+        "M106 S{fan_speed}"
+    ],
+    "gcodeTrack": [
+        "M73 P{progress}"
+    ],
+    "gcodeLayer": [
+        ";; LAYER {layer} of {layers}",
+        "M117 Layer {layer} of {layers}"
+    ],
+    "gcodePre": [
+        "M104 S160          ; set extruder temp",
+        "M140 S{bed_temp}   ; set bed temp",
+        "M190 S{bed_temp}   ; wait for bed temp",
+        "G28 W              ; home all without mesh bed level",
+        "G80                ; mesh bed leveling",
+        "G90                ; set absolute positioning mode",
+        "M83                ; set relative positioning for extruder",
+        "M900 K0.04         ; linear advance",
+        "G1 F1000           ; set feedrate",
+        "G1 Y-3.0 Z0.5      ; park outside print area",
+        "M104 S{temp}       ; set extruder actual required temp",
+        "M109 S{temp}       ; wait for extruder actual required temp",
+        "G1 X60.0 E9.0      ; purge line",
+        "G1 X100.0 E12.5    ; purge line",
+        "M117 Printing"
+    ],
+    "gcodePost": [
+        "G0 E-1 F900  ; retract slightly",
+        "M104 S0      ; turn off nozzle heat",
+        "M140 S0      ; turn off bed heat",
+        "M107         ; turn off fan",
+        "G0 F3000     ; set feedrate",
+        "G0 Y210 Z210 ; serve up print",
+        "G4           ; wait",
+        "M84          ; disable steppers",
+        "M117 Print Done"
+    ],
+    "gcodeProc": "",
+    "gcodeDwell": [],
+    "gcodeSpindle": [],
+    "gcodeChange": [],
+    "gcodeFExt": "gcode",
+    "gcodeSpace": true,
+    "gcodeStrip": false,
+    "gcodeLaserOn": [],
+    "gcodeLaserOff": [],
+    "extruders": [
+        {
+            "extFilament": 1.75,
+            "extNozzle": 0.4,
+            "extSelect": [
+                "T0"
+            ],
+            "extDeselect": [],
+            "extOffsetX": 0,
+            "extOffsetY": 0
+        }
+    ],
+    "new": false,
+    "deviceName": "Prusa i3 MK3S+",
+    "fwRetract": false,
+    "extras": {
+        "palette": {
+            "printer": "3612e108c25c",
+            "ping": null,
+            "feed": null,
+            "push": null,
+            "offset": null,
+            "heat": null,
+            "cool": null,
+            "press": null
+        }
+    },
+    "profiles": [
+        {
+            "processName": "MK3S+ PLA",
+            "sliceHeight": 0.2,
+            "sliceShells": 3,
+            "sliceShellOrder": "in-out",
+            "sliceLayerStart": "center",
+            "sliceFillAngle": 45,
+            "sliceFillOverlap": 0.35,
+            "sliceFillSparse": 0.1,
+            "sliceFillType": "hex",
+            "sliceAdaptive": false,
+            "sliceMinHeight": 0,
+            "sliceSupportDensity": 0.25,
+            "sliceSupportOffset": 0.4,
+            "sliceSupportGap": 0,
+            "sliceSupportSize": 6,
+            "sliceSupportArea": 0.25,
+            "sliceSupportExtra": 0,
+            "sliceSupportAngle": 1,
+            "sliceSupportNozzle": 0,
+            "sliceSolidMinArea": 5,
+            "sliceSolidLayers": 2,
+            "sliceBottomLayers": 2,
+            "sliceTopLayers": 3,
+            "firstLayerRate": 10,
+            "firstLayerPrintMult": 1,
+            "firstLayerYOffset": 0,
+            "firstLayerBrim": 0,
+            "firstLayerBeltLead": 200,
+            "firstLayerFanSpeed": 0,
+            "outputTemp": 205,
+            "outputBedTemp": 70,
+            "outputFanSpeed": 255,
+            "outputFeedrate": 80,
+            "outputFinishrate": 30,
+            "outputSeekrate": 150,
+            "outputShellMult": 1,
+            "outputFillMult": 1.1,
+            "outputSparseMult": 1.1,
+            "outputRetractDist": 4,
+            "outputRetractSpeed": 60,
+            "outputRetractWipe": 2,
+            "outputRetractDwell": 0,
+            "outputShortPoly": 50,
+            "outputMinSpeed": 1,
+            "outputCoastDist": 0.05,
+            "outputLayerRetract": false,
+            "zHopDistance": 0.1,
+            "antiBacklash": 0,
+            "outputOriginCenter": false,
+            "sliceFillWidth": 1,
+            "sliceFillRate": 0,
+            "sliceSupportEnable": false,
+            "firstSliceHeight": 0.2,
+            "firstLayerFillRate": 35,
+            "firstLayerLineMult": 1,
+            "firstLayerNozzleTemp": 0,
+            "firstLayerBedTemp": 0,
+            "firstLayerBrimTrig": 0,
+            "firstLayerBrimGap": 0,
+            "outputRaft": false,
+            "outputRaftSpacing": 0.2,
+            "outputBrimCount": 0,
+            "outputBrimOffset": 2,
+            "outputPurgeTower": 0,
+            "outputInvertX": false,
+            "outputInvertY": false,
+            "arcTolerance": 0,
+            "ranges": [],
+            "outputLoops": 0,
+            "firstLayerBrimIn": 0,
+            "firstLayerBeltBump": 0,
+            "outputBeltFirst": false,
+            "sliceFillRepeat": 4,
+            "sliceLineWidth": 0,
+            "sliceSupportSpan": 5,
+            "sliceSupportOutline": true,
+            "firstLayerFlatten": 0,
+            "outputDraftShield": false,
+            "outputAvoidGaps": true,
+            "sliceDetectThin": "off",
+            "beltAnchor": 200
+        }
+    ]
+}

src/kiri/init.js

@@ -1034,15 +1034,16 @@ gapp.register("kiri.init", [], (root, exports) => {
             removeLocalDevice(getSelectedDevice());
             showDevices();
         };
-        ui.deviceExport.onclick = function() {
+        ui.deviceExport.onclick = function(event) {
-            let exp = api.util.b64enc({
+            const record = {
                 version: kiri.version,
                 device: selected,
                 process: api.process.code(),
                 code: devs[selected],
                 time: Date.now()
-            });
+            };
-            deviceExport(exp, selected);
+            let exp = api.util.b64enc(record);
+            api.device.export(exp, selected, { event, record });
         };
 
         ui.deviceList.innerHTML = '';
@@ -1514,6 +1515,9 @@ gapp.register("kiri.init", [], (root, exports) => {
         space.platform.setRound(true);
         space.useDefaultKeys(api.feature.on_key === undefined || api.feature.on_key_defaults);
 
+        // api augmentation with local functions
+        api.device.export = deviceExport;
+
         Object.assign(ui, {
             tracker:            tracker,
             container:          container,

src/kiri/tools.js

@@ -4,6 +4,7 @@
 // dep: kiri.api
 gapp.register("kiri.tools", [], (root, exports) => {
 
+const { Vector3, Quaternion } = THREE;
 const { kiri } = root;
 const { api } = kiri;
 
@@ -11,6 +12,7 @@ const { api } = kiri;
 let pgeo = new THREE.CircleGeometry(8, 30);
 let pmat = new THREE.MeshBasicMaterial({color: 0xff0000, opacity: 0.5, transparent: true});
 let pmesh = new THREE.Mesh(pgeo, pmat);
+
 // circle outline
 let pi = pgeo.index.array;
 let pp = pgeo.attributes.position.array;
@@ -88,9 +90,9 @@ api.event.on('mouse.hover', (ev) => {
         pmesh.position.x = point.x - opos.x + norm.x * 0.1;
         pmesh.position.y = -point.z - opos.y + norm.y * 0.1;
         pmesh.position.z = point.y + norm.z * 0.1;
-        let q = new THREE.Quaternion().setFromUnitVectors(
+        let q = new Quaternion().setFromUnitVectors(
-            new THREE.Vector3(0,0,1),
+            new Vector3(0,0,1),
-            new THREE.Vector3(norm.x,norm.y,norm.z)
+            new Vector3(norm.x,norm.y,norm.z)
         );
         pmesh.setRotationFromQuaternion(q);
     }
@@ -104,7 +106,7 @@ api.event.on('mouse.hover.up', (ev) => {
     if (!object) {
         return;
     }
-    let q = new THREE.Quaternion().setFromUnitVectors(lastface.normal, new THREE.Vector3(0,0,-1));
+    let q = new Quaternion().setFromUnitVectors(lastface.normal, new Vector3(0,0,-1));
     api.selection.rotate(q);
     endit();
 });