make cli a more fully featured command line utility refs #199

src/cli/kiri-fdm-device.json

@@ -0,0 +1,64 @@
+{
+    "noclone":false,
+    "mode":"FDM",
+    "internal":0,
+    "imageURL":"",
+    "imageScale":0.75,
+    "imageAnchor":0,
+    "bedHeight":2.5,
+    "bedWidth":220,
+    "bedDepth":220,
+    "bedRound":false,
+    "bedBelt":false,
+    "maxHeight":300,
+    "originCenter":false,
+    "extrudeAbs":true,
+    "spindleMax":0,
+    "gcodeFan":[ "M106 S{fan_speed}" ],
+    "gcodeTrack":[],
+    "gcodeLayer":[],
+    "gcodePre":[
+    "M107                     ; turn off filament cooling fan",
+    "G90                      ; set absolute positioning mode",
+    "M82                      ; set absolute positioning for extruder",
+    "M104 S{temp} T{tool}     ; set extruder temperature",
+    "M140 S{bed_temp} T{tool} ; set bed temperature",
+    "G28                      ; home axes",
+    "G92 X0 Y0 Z0 E0          ; reset all axes positions",
+    "G1 X0 Y0 Z0.25 F180      ; move XY to 0,0 and Z 0.25mm over bed",
+    "G92 E0                   ; zero the extruded",
+    "M190 S{bed_temp} T{tool} ; wait for bed to reach target temp",
+    "M109 S{temp} T{tool}     ; wait for extruder to reach target temp",
+    "G92 E0                   ; zero the extruded",
+    "G1 F225                  ; set feed speed"
+    ],
+    "gcodePost":[
+    "M107                     ; turn off filament cooling fan",
+    "M104 S0 T{tool}          ; turn off right extruder",
+    "M140 S0 T{tool}          ; turn off bed",
+    "G1 X0 Y300 F1200         ; end move",
+    "M84                      ; disable stepper motors"
+    ],
+    "gcodeProc":"",
+    "gcodePause":[],
+    "gcodeDwell":[],
+    "gcodeSpindle":[],
+    "gcodeChange":[],
+    "gcodeFExt":"gcode",
+    "gcodeSpace":true,
+    "gcodeStrip":false,
+    "gcodeLaserOn":[],
+    "gcodeLaserOff":[],
+    "extruders":[
+    {
+        "extFilament":1.75,
+        "extNozzle":0.4,
+        "extSelect":[ "T0" ],
+        "extDeselect":[],
+        "extOffsetX":0,
+        "extOffsetY":0
+    }
+    ],
+    "new":false,
+    "deviceName":"Creality.Ender.3"
+}