diff --git a/src/kiri-dev/fdm/Dagoma.Disco.Ult.V2 b/src/kiri-dev/fdm/Dagoma.Disco.Ult.V2
new file mode 100644
index 00000000..649e7199
--- /dev/null
+++ b/src/kiri-dev/fdm/Dagoma.Disco.Ult.V2
@@ -0,0 +1,170 @@
+{
+    "mode": "FDM",
+    "internal": 0,
+    "bedHeight": 2.5,
+    "bedWidth": 205,
+    "bedDepth": 205,
+    "bedRound": false,
+    "bedBelt": false,
+    "deviceZMax": 0,
+    "gcodeTime": 1,
+    "maxHeight": 205,
+    "originCenter": false,
+    "gcodeFan": [],
+    "gcodeFeature": [],
+    "gcodeTrack": [],
+    "gcodeLayer": [],
+    "gcodePre": [
+        "G90",
+        "M106 S255",
+        "G28 X Y",
+        "G1 X50",
+        "M109 R90",
+        "G28",
+        "M104 S{temp}",
+        "G29",
+        "M107",
+        "G1 X100 Y20 F3000",
+        "G1 Z0.5",
+        "M109 S{temp}",
+        "M82",
+        "G92 E0",
+        "G1 F200 E10",
+        "G92 E0",
+        "G1 Z3",
+        "G1 F6000"
+    ],
+    "gcodePost": [
+        "M106 S255",
+        "M140 S0",
+        "G91",
+        "G1 E-1 F300",
+        "G1 Z+3 F3000",
+        "G90",
+        "G28 X Y",
+        "M107",
+        "M84"
+    ],
+    "gcodeProc": "",
+    "gcodeFExt": "gcode",
+    "extruders": [
+        {
+            "extFilament": 1.75,
+            "extNozzle": 0.4,
+            "extSelect": [
+                "T0"
+            ],
+            "extDeselect": [],
+            "extOffsetX": 0,
+            "extOffsetY": 0
+        }
+    ],
+    "new": false,
+    "deviceName": "Dagoma Disco Ult V2",
+    "imageURL": "",
+    "fwRetract": false,
+    "filamentSource": "direct",
+    "profiles": [
+        {
+            "processName": "dagoma draft",
+            "sliceHeight": 0.2,
+            "sliceShells": 3,
+            "sliceShellOrder": "in-out",
+            "sliceLayerStart": "last",
+            "sliceLayerStartX": 0,
+            "sliceLayerStartY": 0,
+            "sliceLineWidth": 0,
+            "sliceFillGrow": 0,
+            "sliceFillAngle": 45,
+            "sliceFillWidth": 1,
+            "sliceFillOverlap": 0.25,
+            "sliceFillSparse": 0.1,
+            "sliceFillRepeat": 1,
+            "sliceFillRate": 0,
+            "sliceSolidRate": 0,
+            "sliceFillType": "hex",
+            "sliceSupportDensity": 0.15,
+            "sliceSupportOffset": 0,
+            "sliceSupportGap": 1,
+            "sliceSupportSize": 2,
+            "sliceSupportArea": 0.1,
+            "sliceSupportSpan": 5,
+            "sliceSupportGrow": 0,
+            "sliceSupportExtra": 0,
+            "sliceSupportAngle": 60,
+            "sliceSupportNozzle": 0,
+            "sliceSupportEnable": false,
+            "sliceSupportOutline": false,
+            "sliceSolidMinArea": 1,
+            "sliceBottomLayers": 3,
+            "sliceTopLayers": 3,
+            "firstSliceHeight": 0.05,
+            "firstLayerRate": 17,
+            "firstLayerFillRate": 17,
+            "firstLayerPrintMult": 1,
+            "firstLayerLineMult": 1,
+            "firstLayerYOffset": 0,
+            "firstLayerNozzleTemp": 205,
+            "firstLayerBedTemp": 0,
+            "firstLayerBrim": 0,
+            "firstLayerBrimIn": 0,
+            "firstLayerBrimTrig": 0,
+            "firstLayerBrimGap": 0,
+            "firstLayerBeltLead": 3,
+            "firstLayerBeltBump": 0,
+            "firstLayerFanSpeed": 0,
+            "firstLayerFlatten": 0,
+            "outputRaft": false,
+            "outputRaftSpacing": 0.2,
+            "outputDraftShield": false,
+            "outputTemp": 220,
+            "outputBedTemp": 0,
+            "outputFeedrate": 60,
+            "outputFinishrate": 60,
+            "outputSeekrate": 120,
+            "outputShellMult": 1,
+            "outputFillMult": 1,
+            "outputSparseMult": 1,
+            "outputFanSpeed": 255,
+            "outputRetractDist": 3.5,
+            "outputRetractSpeed": 50,
+            "outputRetractWipe": 0,
+            "outputRetractDwell": 20,
+            "outputBrimCount": 2,
+            "outputBrimOffset": 2,
+            "outputShortPoly": 100,
+            "outputMinSpeed": 10,
+            "outputCoastDist": 0,
+            "outputPurgeTower": 0,
+            "outputBeltFirst": false,
+            "outputAvoidGaps": true,
+            "outputAlternating": false,
+            "outputLayerRetract": false,
+            "outputLoops": 0,
+            "outputInvertX": false,
+            "outputInvertY": false,
+            "sliceDetectThin": "off",
+            "sliceMinHeight": 0.2,
+            "sliceAdaptive": false,
+            "zHopDistance": 0.2,
+            "arcTolerance": 0,
+            "antiBacklash": 1,
+            "ranges": [],
+            "outputFanLayer": 1,
+            "sliceAngle": 45,
+            "outputNozzle": 0
+        }
+    ],
+    "extras": {
+        "palette": {
+            "printer": "ee5dd1884e2d",
+            "ping": null,
+            "feed": null,
+            "push": null,
+            "offset": null,
+            "heat": null,
+            "cool": null,
+            "press": null
+        }
+    }
+}
\ No newline at end of file