update bambu profiles, add A1
This commit is contained in:
Stewart Allen
parent
48f40a566b
commit
7f69a59849
2 changed files with 881 additions and 65 deletions
|
|
@ -31,7 +31,7 @@
|
|||
],
|
||||
"gcodePre": [
|
||||
";; DEFINE BAMBU-AMS 0,1,2,3",
|
||||
"; ===== HEADER =====================================================================",
|
||||
"; ===== HEADER ====================================",
|
||||
"M73 P0 R14 ; Initial progress and time remaining",
|
||||
"M201 X20000 Y20000 Z500 E5000 ; Set max acceleration",
|
||||
"M203 X500 Y500 Z20 E30 ; Set max feedrates",
|
||||
|
|
@ -39,10 +39,10 @@
|
|||
"M205 X9.00 Y9.00 Z3.00 E2.50 ; Set advanced settings",
|
||||
"M106 S0 ; Set part fan speed to 0",
|
||||
"M106 P2 S0 ; Turn off aux fan",
|
||||
";===== machine: P1S ========================",
|
||||
";===== machine: P1S ===============================",
|
||||
"M104 S75 ; Set extruder temp to turn on HB fan, prevent filament oozing",
|
||||
"M710 A1 S255 ; Turn on MC fan by default (P1S)",
|
||||
";===== Reset machine status =================",
|
||||
";===== Reset machine status =======================",
|
||||
"M290 X40 Y40 Z2.6666666 ; Set baby stepping offsets",
|
||||
"G91 ; Set to relative positioning",
|
||||
"M17 Z0.4 ; Lower Z-motor current",
|
||||
|
|
@ -59,11 +59,11 @@
|
|||
"M221 X0 Y0 Z0 ; Turn off soft endstop to prevent logic issues",
|
||||
"G29.1 Z0 ; Clear Z-trim value",
|
||||
"M204 S10000 ; Initialize acceleration to 10 m/s^2",
|
||||
";===== Heatbed preheat ====================",
|
||||
";===== Heatbed preheat ============================",
|
||||
"M1002 gcode_claim_action : 2 ; Claim action for preheating",
|
||||
"M140 S{bed_temp} ; Set bed temperature to 65°C",
|
||||
"M190 S{bed_temp} ; Wait for bed temperature to reach 65°C",
|
||||
";===== Turn on fans to prevent PLA jamming =====",
|
||||
";===== Turn on fans to prevent PLA jamming ========",
|
||||
"M106 P3 S180 ; set chamber fan speed to prevent PLA jamming",
|
||||
"M106 P2 S100 ; Turn on aux fan to cool toolhead",
|
||||
";===== Prepare print temperature and material =====",
|
||||
|
|
@ -118,7 +118,6 @@
|
|||
"G1 X165 F15000 ; Wipe and shake",
|
||||
"M400 ; Wait for all moves to finish",
|
||||
"M106 P1 S0 ; Turn off nozzle fan",
|
||||
";===== Prepare print temperature and material end =====",
|
||||
";===== Wipe nozzle ===============================",
|
||||
"M1002 gcode_claim_action : 14 ; Claim action for nozzle wipe",
|
||||
"M975 S1 ; Turn on feature (guess: vibration suppression)",
|
||||
|
|
@ -199,8 +198,7 @@
|
|||
"G1 X230 Y15 ; Move to X230 Y15",
|
||||
"G29.2 S1 ; Turn on ABL",
|
||||
"M106 S0 ; Turn off part fan, too noisy",
|
||||
";===== Wipe nozzle end ================================",
|
||||
";===== Bed leveling ==================================",
|
||||
";===== Bed leveling ===============================",
|
||||
"M1002 judge_flag g29_before_print_flag ; Judge flag before leveling",
|
||||
"M622 J1",
|
||||
" M1002 gcode_claim_action : 1 ; Claim action for bed leveling",
|
||||
|
|
@ -208,20 +206,19 @@
|
|||
" M400 ; Wait for all moves to finish",
|
||||
" M500 ; Save calibration data",
|
||||
"M623",
|
||||
";===== Bed leveling end ================================",
|
||||
";===== Home after wipe mouth =========================",
|
||||
";===== Home after wipe mouth ======================",
|
||||
"M1002 judge_flag g29_before_print_flag ; Judge flag before homing",
|
||||
"M622 J0",
|
||||
" M1002 gcode_claim_action : 13 ; Claim action for homing",
|
||||
" G28 ; Home all axes",
|
||||
"M623",
|
||||
";===== Home after wipe mouth end =======================",
|
||||
";===== Home after wipe mouth end ==================",
|
||||
"M975 S1 ; Turn on vibration suppression",
|
||||
";===== Turn on fans to prevent PLA jamming =====",
|
||||
";===== Turn on fans to prevent PLA jamming ========",
|
||||
"M106 P3 S180 ; set chamber fan speed to Prevent PLA jamming",
|
||||
"M106 P2 S100 ; Turn on aux fan to cool toolhead",
|
||||
"M104 S{temp} ; Set extruder temp to 220°C earlier, reduce wait time",
|
||||
";===== Mech mode fast check ==========================",
|
||||
";===== Mech mode fast check =======================",
|
||||
"G1 X128 Y128 Z10 F20000 ; Move to center for check",
|
||||
"M400 P200 ; Wait and perform check",
|
||||
"M970.3 Q1 A7 B30 C80 H15 K0 ; Custom command (mechanical check)",
|
||||
|
|
@ -235,8 +232,7 @@
|
|||
"M73 P37 R8 ; Update progress and time remaining",
|
||||
"G1 X230 Y15 ; Move to X230 Y15",
|
||||
"G28 X ; Re-home X and Y",
|
||||
";===== Mech mode fast check end =========================",
|
||||
";===== Nozzle load line ===============================",
|
||||
";===== Nozzle load line ===========================",
|
||||
"M975 S1 ; Turn on vibration suppression",
|
||||
"G90 ; Set to absolute positioning",
|
||||
"M83 ; Set extruder to relative mode",
|
||||
|
|
@ -252,9 +248,8 @@
|
|||
"G0 Y1.5 E1.166 ; Move along Y while extruding",
|
||||
"G0 X18 E25 F5539.96 ; Return to start position while extruding",
|
||||
"M400 ; Wait for all moves to finish",
|
||||
";===== For Textured PEI Plate ========================",
|
||||
";===== Final Preparations =========================",
|
||||
";G29.1 Z-0.04 ; Adjust Z-offset for textured PEI plate",
|
||||
";===== Turn off light and wait extrude temperature =====",
|
||||
"M1002 gcode_claim_action : 0 ; Claim action",
|
||||
"M106 S0 ; Turn off part fan",
|
||||
"M106 P2 S0 ; Turn off aux fan",
|
||||
|
|
@ -267,54 +262,54 @@
|
|||
"M981 S1 P20000 ; Open spaghetti detector"
|
||||
],
|
||||
"gcodePost": [
|
||||
"; ===== FOOTER =====================================================================",
|
||||
"M106 S0 ; Turn off part cooling fan",
|
||||
"M106 P2 S0 ; Turn off auxiliary cooling fan",
|
||||
"M981 S0 P20000 ; Close spaghetti detector",
|
||||
"M106 P3 S0 ; Turn off chamber fan",
|
||||
"M400 ; Wait for buffer to clear",
|
||||
"G92 E0 ; Zero the extruder",
|
||||
"G1 E-0.8 F1800 ; Retract filament by 0.8mm",
|
||||
"G91 ; relative moves",
|
||||
"G1 Z5 F900 ; drop bed 5mm",
|
||||
"G90 ; absolute moves",
|
||||
"G1 X65 Y245 F12000 ; Move to safe position X65 Y245",
|
||||
"G1 Y265 F3000 ; Move to Y265 slowly",
|
||||
"G1 X65 Y245 F12000 ; Move back to X65 Y245",
|
||||
"G1 Y265 F3000 ; Move to Y265 slowly again",
|
||||
"M140 S0 ; Turn off heated bed",
|
||||
"M106 S0 ; Turn off part cooling fan",
|
||||
"M106 P2 S0 ; Turn off auxiliary cooling fan",
|
||||
"M106 P3 S0 ; Turn off chamber cooling fan",
|
||||
"G1 X100 F12000 ; Wipe nozzle",
|
||||
"M620 S255 ; Pull back filament to AMS",
|
||||
"G1 X20 Y50 F12000 ; Move to X20 Y50",
|
||||
"G1 Y-3 ; Move down Y-axis by 3",
|
||||
"T255 ; Tool change command (educated guess)",
|
||||
"G1 X65 F12000 ; Move to X65",
|
||||
"G1 Y265 ; Move to Y265",
|
||||
"G1 X100 F12000 ; Wipe nozzle again",
|
||||
"M621 S255 ; Custom command (educated guess)",
|
||||
"M104 S0 ; Turn off hotend",
|
||||
"M622.1 S1 ; Enable feature (default for older firmware)",
|
||||
"M1002 judge_flag timelapse_record_flag ; Check if timelapse recording is needed",
|
||||
"M622 J1 ; Enable timelapse",
|
||||
" M400 ; Wait for all motions to complete",
|
||||
" M991 S0 P-1 ; End smooth timelapse at safe position",
|
||||
" M400 S3 ; Wait for last picture to be taken",
|
||||
"M623 ; End of \"timelapse_record_flag\"",
|
||||
"M400 ; Wait for all motions to complete",
|
||||
"M17 S ; Engage stepper motors",
|
||||
"M17 Z0.4 ; Lower Z motor current to reduce impact if obstruction exists",
|
||||
"G1 Z{z_max} F600 ; Drop bed",
|
||||
"M400 P100 ; Wait for 100ms",
|
||||
"M17 R ; Restore Z motor current",
|
||||
"M220 S100 ; Reset feedrate magnitude to 100%",
|
||||
"M201.2 K1.0 ; Reset acceleration magnitude",
|
||||
"M73.2 R1.0 ; Reset remaining time magnitude",
|
||||
"M1002 set_gcode_claim_speed_level : 0 ; Set G-code claim speed level to 0",
|
||||
"M17 X0.8 Y0.8 Z0.5 ; Lower motor current to 45% power",
|
||||
"M73 P100 R0 ; Set progress to 100% with 0 remaining time"
|
||||
"; ===== FOOTER =====================================",
|
||||
"M106 S0 ; Turn off part cooling fan",
|
||||
"M106 P2 S0 ; Turn off auxiliary cooling fan",
|
||||
"M981 S0 P20000 ; Close spaghetti detector",
|
||||
"M106 P3 S0 ; Turn off chamber fan",
|
||||
"M400 ; Wait for buffer to clear",
|
||||
"G92 E0 ; Zero the extruder",
|
||||
"G1 E-0.8 F1800 ; Retract filament by 0.8mm",
|
||||
"G91 ; relative moves",
|
||||
"G1 Z5 F900 ; drop bed 5mm",
|
||||
"G90 ; absolute moves",
|
||||
"G1 X65 Y245 F12000 ; Move to safe position X65 Y245",
|
||||
"G1 Y265 F3000 ; Move to Y265 slowly",
|
||||
"G1 X65 Y245 F12000 ; Move back to X65 Y245",
|
||||
"G1 Y265 F3000 ; Move to Y265 slowly again",
|
||||
"M140 S0 ; Turn off heated bed",
|
||||
"M106 S0 ; Turn off part cooling fan",
|
||||
"M106 P2 S0 ; Turn off auxiliary cooling fan",
|
||||
"M106 P3 S0 ; Turn off chamber cooling fan",
|
||||
"G1 X100 F12000 ; Wipe nozzle",
|
||||
"M620 S255 ; Pull back filament to AMS",
|
||||
"G1 X20 Y50 F12000 ; Move to X20 Y50",
|
||||
"G1 Y-3 ; Move down Y-axis by 3",
|
||||
"T255 ; Tool change command (educated guess)",
|
||||
"G1 X65 F12000 ; Move to X65",
|
||||
"G1 Y265 ; Move to Y265",
|
||||
"G1 X100 F12000 ; Wipe nozzle again",
|
||||
"M621 S255 ; Custom command (educated guess)",
|
||||
"M104 S0 ; Turn off hotend",
|
||||
"M622.1 S1 ; Enable feature (default for older firmware)",
|
||||
"M1002 judge_flag timelapse_record_flag ; Check if timelapse recording is needed",
|
||||
"M622 J1 ; Enable timelapse",
|
||||
" M400 ; Wait for all motions to complete",
|
||||
" M991 S0 P-1 ; End smooth timelapse at safe position",
|
||||
" M400 S3 ; Wait for last picture to be taken",
|
||||
"M623 ; End of \"timelapse_record_flag\"",
|
||||
"M400 ; Wait for all motions to complete",
|
||||
"M17 S ; Engage stepper motors",
|
||||
"M17 Z0.4 ; Lower Z motor current to reduce impact if obstruction exists",
|
||||
"G1 Z{z_max} F600 ; Drop bed",
|
||||
"M400 P100 ; Wait for 100ms",
|
||||
"M17 R ; Restore Z motor current",
|
||||
"M220 S100 ; Reset feedrate magnitude to 100%",
|
||||
"M201.2 K1.0 ; Reset acceleration magnitude",
|
||||
"M73.2 R1.0 ; Reset remaining time magnitude",
|
||||
"M1002 set_gcode_claim_speed_level : 0 ; Set G-code claim speed level to 0",
|
||||
"M17 X0.8 Y0.8 Z0.5 ; Lower motor current to 45% power",
|
||||
"M73 P100 R0 ; Set progress to 100% with 0 remaining time"
|
||||
],
|
||||
"gcodeProc": "",
|
||||
"gcodeFExt": "gcode",
|
||||
|
|
|
|||
Loading…
Reference in a new issue