checkpoint kiri module migration work

src2/kiri-dev/fdm/Anycubic.Kobra.json

@@ -0,0 +1,79 @@
+{
+    "noclone": false,
+    "mode": "FDM",
+    "internal": 0,
+    "bedHeight": 2.5,
+    "bedWidth": 222,
+    "bedDepth": 222,
+    "bedRound": false,
+    "bedBelt": false,
+    "resolutionX": 1600,
+    "resolutionY": 900,
+    "maxHeight": 222,
+    "originCenter": false,
+    "extrudeAbs": false,
+    "gcodeFan": [
+        "M106 S{fan_speed}"
+    ],
+    "gcodeTrack": [
+        "M117 {progress}% layer {layer} / {layers}"
+    ],
+    "gcodeLayer": [],
+    "gcodePre": [
+        "M107                         ; turn off filament cooling fan",
+        "M104 S{temp} T0              ; set extruder temperature",
+        "M140 S{bed_temp} T0          ; set bed temperature",
+        "G90                          ; set absolute positioning mode",
+        "M83                          ; set relative positioning for extruder",
+        "G28                          ; home axes",
+        "G1 F3000                     ; set default move speed",
+        "G1 Z1 F6000                  ; pause above the bed",
+        "M190 S{bed_temp} T0          ; wait for bed to reach target temp",
+        "M109 S{temp} T0              ; wait for extruder to reach target temp",
+        "G92 E0                       ; set extruder position to 0"
+    ],
+    "gcodePost": [
+        "M107                ; turn off filament cooling fan",
+        "M104 S0 T0          ; turn off extruder",
+        "M140 S0 T0          ; turn off bed",
+        "G91                 ; relative movement",
+        "G1 Z10 F1200        ; drop bed 10mm",
+        "G90                 ; absolute positioning",
+        "G28 X0 Y0           ; home XY axes",
+        "M84                 ; disable stepper motors"
+    ],
+    "gcodeExt": [],
+    "gcodeInt": [],
+    "gcodeProc": "",
+    "gcodePause": [],
+    "gcodeDwell": [],
+    "gcodeSpindle": [],
+    "gcodeChange": [],
+    "gcodeFExt": "gcode",
+    "gcodeSpace": true,
+    "gcodeStrip": false,
+    "gcodeLaserOn": [],
+    "gcodeLaserOff": [],
+    "extruders": [
+        {
+            "extFilament": 1.75,
+            "extNozzle": 0.4,
+            "extOffsetX": 0,
+            "extOffsetY": 0
+        }
+    ],
+    "deviceName": "Anycubic Kobra",
+    "fwRetract": false,
+    "extras": {
+        "palette": {
+            "printer": "6c99ea036da",
+            "ping": null,
+            "feed": null,
+            "push": null,
+            "offset": null,
+            "heat": null,
+            "cool": null,
+            "press": null
+        }
+    }
+}