checkpoint kiri module migration work

src2/cli/kiri-fdm-device.json

@@ -0,0 +1,62 @@
+{
+    "new": false,
+    "mode": "FDM",
+    "deviceName":"Creality.Ender.3",
+    "noclone": false,
+    "internal": 0,
+    "imageURL": "",
+    "imageScale": 0.75,
+    "imageAnchor": 0,
+    "bedHeight": 2.5,
+    "bedWidth": 220,
+    "bedDepth": 220,
+    "bedRound": false,
+    "bedBelt": false,
+    "maxHeight": 300,
+    "originCenter": false,
+    "extrudeAbs": true,
+    "spindleMax": 0,
+    "gcodeFan": ["M106 S{fan_speed}"],
+    "gcodeTrack": [],
+    "gcodeLayer": [],
+    "gcodePre":[
+        "M107                     ; turn off filament cooling fan",
+        "G90                      ; set absolute positioning mode",
+        "M82                      ; set absolute positioning for extruder",
+        "M104 S{temp} T{tool}     ; set extruder temperature",
+        "M140 S{bed_temp} T{tool} ; set bed temperature",
+        "G28                      ; home axes",
+        "G92 X0 Y0 Z0 E0          ; reset all axes positions",
+        "G1 X0 Y0 Z0.25 F180      ; move XY to 0,0 and Z 0.25mm over bed",
+        "G92 E0                   ; zero the extruded",
+        "M190 S{bed_temp} T{tool} ; wait for bed to reach target temp",
+        "M109 S{temp} T{tool}     ; wait for extruder to reach target temp",
+        "G92 E0                   ; zero the extruded",
+        "G1 F225                  ; set feed speed"
+        ],
+        "gcodePost":[
+        "M107                     ; turn off filament cooling fan",
+        "M104 S0 T{tool}          ; turn off right extruder",
+        "M140 S0 T{tool}          ; turn off bed",
+        "G1 X0 Y300 F1200         ; end move",
+        "M84                      ; disable stepper motors"
+    ],
+    "gcodeProc": "",
+    "gcodePause": [],
+    "gcodeDwell": [],
+    "gcodeSpindle": [],
+    "gcodeChange": [],
+    "gcodeFExt": "gcode",
+    "gcodeSpace": true,
+    "gcodeStrip": false,
+    "gcodeLaserOn": [],
+    "gcodeLaserOff":[],
+    "extruders":[ {
+        "extFilament":1.75,
+        "extNozzle":0.4,
+        "extSelect":[ "T0" ],
+        "extDeselect":[],
+        "extOffsetX":0,
+        "extOffsetY":0
+    } ],
+}