From 77ff79feb592cc9d08c33adb40dea12ab5048fdc Mon Sep 17 00:00:00 2001 From: Stewart Allen Date: Mon, 3 May 2021 13:09:08 -0400 Subject: [PATCH] a few german cnc updates --- web/kiri/index.html | 2 +- web/kiri/lang/de-de.js | 66 +++++++++++++++++++++--------------------- 2 files changed, 34 insertions(+), 34 deletions(-) diff --git a/web/kiri/index.html b/web/kiri/index.html index 50da1d43..a07f1f2f 100644 --- a/web/kiri/index.html +++ b/web/kiri/index.html @@ -49,7 +49,7 @@
简体中文
dansk
-
deutsche
+
deutsch
english
español
français
diff --git a/web/kiri/lang/de-de.js b/web/kiri/lang/de-de.js index 777e877f..384256a5 100644 --- a/web/kiri/lang/de-de.js +++ b/web/kiri/lang/de-de.js @@ -57,19 +57,19 @@ kiri.lang['de-de'] = { dm_sldt: "Wähle einen Geräte-Typ aus", dm_stdd: "Vordefinierte Geräte", dm_mydd: "Meine Geräte", - dm_seld: "Ausgweähltes Gerät", + dm_seld: "Ausgewähltes Gerät", dm_rcnt: "Letzte Dateien", dm_savs: "Gespeicherte Voreinstellungen", - dm_appp: "Anwendungseinsetllungen", + dm_appp: "Anwendungseinstellungen", // CAM Tool Dialog td_tyem: "end", // end mill td_tybm: "ball", // ball mill - td_tytm: "taper", // taper mill - td_tonm: "tool #", - td_shft: "shaft", // endmill shaft specs - td_flut: "flute", // endmill flute specs - td_tapr: "taper", // endmill taper specs + td_tytm: "Kegel", // taper mill + td_tonm: "Werkzeug #", + td_shft: "Schafft", // endmill shaft specs + td_flut: "Spannut", // endmill flute specs + td_tapr: "Kegel", // endmill taper specs // DEVICE dialog groups dv_gr_dev: "Gerät", @@ -90,7 +90,7 @@ kiri.lang['de-de'] = { dv_bedd_l: "Maßeinheiten der Arbeitsfläche", dv_bedh_s: "Höhe", dv_bedh_l: ["Maximale Objekthöhe","in Maßeinheiten der Arbeitsfläche"], - dv_spmx_s: "Spindel-Maximum", + dv_spmx_s: "Max. Spindelgeschwindigkeit", dv_spmx_l: ["Maximale Umdrehungen pro Minute der Spindel","0 zum deaktivieren"], dv_xtab_s: "Absolute Positionierung", dv_xtab_l: "Filament wird mit absoluter Positionierung extrudiert", @@ -114,10 +114,10 @@ kiri.lang['de-de'] = { dv_strc_l: ["Kommentare aus GCode entfernen","Kommentare beginnen mit ;"], dv_fext_s: "Datei-Erweiterung", dv_fext_l: "Datei-Erweiterung", - dv_dwll_s: "dwell", - dv_dwll_l: "gcode dwell script", + dv_dwll_s: "Verweilzeit", + dv_dwll_l: "gcode Verweilzeit script", dv_tool_s: "Werkzeg-Wechel", - dv_tool_l: "Skript zum Werkzegwechsel", + dv_tool_l: "Skript zum Werkzeugwechsel", dv_sspd_s: "Spindelgeschwindigkeit", dv_sspd_l: "Einstellung der Spindelgeschwindigkeit", dv_paus_s: "Pause", @@ -345,12 +345,12 @@ kiri.lang['de-de'] = { // CNC COMMON terms cc_tool: "Werkzeug", - cc_offs_s: "offset", - cc_offs_l: ["offset tool center","from chosen path"], + cc_offs_s: "Versatz", + cc_offs_l: ["Versatz tool center","from chosen path"], cc_spnd_s: "spindle rpm", cc_spnd_l: ["spindle speed in","revolutions / minute"], cc_sovr_s: "step over", - cc_sovr_l: ["as a fraction of","tool diameter"], + cc_sovr_l: ["as a fraction of","tool durchmesser"], cc_sdwn_s: "step down", cc_sdwn_l: ["step down depth","for each pass","in workspace units","0 to disable"], cc_feed_s: "feed rate", @@ -361,20 +361,20 @@ kiri.lang['de-de'] = { cc_sngl_l: ["select only single edges","instead of connected polylines"], // CNC COMMON - cc_menu: "limits", - cc_flip: "flip", + cc_menu: "Begrenzungen", + cc_flip: "Umdrehen", cc_rapd_s: "xy feed", cc_rapd_l: ["max xy moves feedrate","in workspace units / minute"], cc_rzpd_s: "z feed", cc_rzpd_l: ["max z moves feedrate","in workspace units / minute"], - cc_loff_s: "offset", + cc_loff_s: "Versatz", cc_loff_l: ["distance from stock face","for leveling pass","in workspace units"], // CNC ROUGHING cr_menu: "rough", cr_lsto_s: "leave stock", - cr_lsto_l: ["horizontal offset from vertical faces","stock to leave for finishing pass","in workspace units"], + cr_lsto_l: ["horizontal Versatz from vertical faces","stock to leave for finishing pass","in workspace units"], cr_ease_s: "ease down", cr_ease_l: ["plunge cuts will","spiral down or ease","along a linear path"], cr_clrt_s: "clear top", @@ -416,35 +416,35 @@ kiri.lang['de-de'] = { // CNC TRACE cu_menu: "trace", - cu_type_s: "type", + cu_type_s: "Typ", cu_type_l: ["follow = tool tip follows line","right or left = tool tip","follows line offset by tool radius"], // CNC DRILLING cd_menu: "drill", cd_axis: "axis", - cd_points: "points", + cd_points: "Punkte", cd_plpr_s: "plunge per", cd_plpr_l: ["max plunge between","dwell periods","in workspace units","0 to disable"], - cd_dwll_s: "dwell time", - cd_dwll_l: ["dwell time","between plunges in","in milliseconds"], + cd_dwll_s: "Verweilzeit", + cd_dwll_l: ["Verweilzeit","between plunges in","in milliseconds"], cd_lift_s: "drill lift", cd_lift_l: ["lift between plunges","after dwell period","in workspace units","0 to disable"], cd_regi_s: "register", cd_regi_l: ["drill registration holes","for double-sided parts","independent of enable","drilling but uses same","tool and settings"], // CNC CUTOUT TABS - ct_menu: "tabs", + ct_menu: "Fräslasche", ct_angl_s: "angle", ct_angl_l: ["starting angle for tab spacing","in degrees (0-360)"], ct_numb_s: "count", ct_numb_l: ["number of tabs to use","will be spaced evenly","around the part"], - ct_wdth_s: "width", + ct_wdth_s: "Breite", ct_wdth_l: "width in workspace units", - ct_hght_s: "height", + ct_hght_s: "Höhe", ct_hght_l: "height in workspace units", - ct_dpth_s: "depth", + ct_dpth_s: "Tiefe", ct_dpth_l: ["distance in workspace units","that the tab projects from","the part surface"], - ct_midl_s: "midline", + ct_midl_s: "Mittellinie", ct_midl_l: ["use midline of tab","instead of z bottom","for double-sided work"], ct_nabl_s: "auto", ct_nabl_l: ["auto generate radial tabs","projected from part center","using count and angle offset"], @@ -458,7 +458,7 @@ kiri.lang['de-de'] = { dk_dpth_l: ["final cut depth","in millimeters"], dk_pass_s: "cut passes", dk_pass_l: ["number of passes","down to cut depth"], - dk_offs_s: "tip offset", + dk_offs_s: "Spitze Versatz", dk_offs_l: ["distance from blade tip","to center of tool","in millimeters"], // OUTPUT LASER @@ -512,24 +512,24 @@ kiri.lang['de-de'] = { ou_zclr_l: ["safe travel offset","from top of part","in workspace units"], ou_ztru_s: "z thru", ou_ztru_l: ["extend cutout pass down","in workspace units"], - ou_conv_s: "conventional", + ou_conv_s: "Gegenlauffräsen", ou_conv_l: ["milling direction","uncheck for 'climb'"], ou_depf_s: "depth first", ou_depf_l: ["optimize pocket cuts","with depth priority"], // CAM STOCK - cs_menu: "stock", + cs_menu: "Rohteil", cs_wdth_s: "width", cs_wdth_l: ["width (x) in workspace units","0 defaults to part size"], cs_dpth_s: "depth", cs_dpth_l: ["depth (y) in workspace units","0 defaults to part size"], cs_hght_s: "height", cs_hght_l: ["height (z) in workspace units","0 defaults to part size"], - cs_offs_s: "offset", + cs_offs_s: "Versatz", cs_offs_l: ["use width, depth, height","as offsets from max","part size on platform"], cs_clip_s: "clip to", cs_clip_l: ["rough and outline","clip cutting paths","to defined stock"], - cs_offe_s: "enable", + cs_offe_s: "Aktivieren", cs_offe_l: "enable milling stock", // ORIGIN (CAM & LASER) @@ -628,7 +628,7 @@ kiri.lang['de-de'] = { sa_sldn_l: ["used to compute the","number of support pillars","0.0-1.0 (0 = disable)"], sa_slsz_s: "size", sa_slsz_l: ["max size of a","support pillar","in millimeters"], - sa_slpt_s: "points", + sa_slpt_s: "Punkte", sa_slpt_l: ["number of points in","each support pillar","in millimeters"], sl_slen_l: "enable supports",