AI_Assistant/grid-apps-cmms
Watch
1
0
Fork
You've already forked grid-apps-cmms
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

package re-organization

Browse source
This commit is contained in:
Stewart Allen 2021-12-28 16:38:05 -05:00
commit 678316ac95
98 changed files with 63 additions and 62 deletions
Download patch file Download diff file Expand all files Collapse all files

48
src/kiri-dev/fdm/Any.Generic.Marlin Normal file
View file

@ -0,0 +1,48 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 ; home axes",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 X0 Y0 Z0.25 F180 ; move xy to 0,0 and z 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M190 S{bed_temp} T{tool} ; wait for bed to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
},{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 30,
"offset_y": 0,
"select": [ "T1" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": false
}
}

1
src/kiri-dev/fdm/Any.Generic.Sailfish Symbolic link
View file

@ -0,0 +1 @@
Any.Generic.Marlin

56
src/kiri-dev/fdm/Anycubic.Chiron Normal file
View file

@ -0,0 +1,56 @@
{
"pre":[
"M107 ; turn off fan",
"M140 S{bed_temp} T{tool}",
"M105 ; update temperature",
"M190 S{bed_temp} T{tool}",
"M104 S{temp} T{tool}",
"M105 ; update temperature",
"M109 S{temp} T{tool}",
"G21 ; set metric values",
"G91 ; relative positioning",
"G1 F1000 Z5 ; lift 5mm before homing",
"G90 ; set absolute positioning",
"M82 ; set extruder to absolute mode",
"G28 X0 Y0 ; home X & Y",
"G28 Z0 ; home Z",
"G1 Z15 F1000 ; move the platform down 15mm",
"G1 F4000 ; set default feed rate",
"G92 E0 ; zero extruder",
";G5 ; uncomment to enable resume after power failure",
"M117 Printing..."
],
"post":[
"M107 ; turn off fan",
"M104 S0 T{tool} ; turn off extruder",
"M140 S0 T{tool} ; turn off bed",
"G92 E0 ; zero extruder",
"G91 ; relative positioning",
"G1 E-2 F300 ; retract filament",
"G1 Z0.5 E-5 ; retract filament, move z up",
"G90 ; absolute positioning",
"G1 X0 Y400 ; move to best position for part removal",
"M82 ; absolute extrusion mode",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_circle": false,
"bed_width": 400,
"bed_depth": 400,
"build_height": 450
}
}

57
src/kiri-dev/fdm/Anycubic.Predator Normal file
View file

@ -0,0 +1,57 @@
{
"pre":[
"M140 S{bed_temp} T{tool}",
"M105 ; update temperature",
"M190 S{bed_temp} T{tool}",
"M104 S{temp} T{tool}",
"M105 ; update temperature",
"M109 S{temp} T{tool}",
"M82 ; set extruder to absolute mode",
"G21 ; set metric values",
"G90 ; set absolute positioning",
"M82 ; set extruder to absolute mode",
"M107 ; turn off fan",
"G28 ; home",
"G1 Z15 F1000 ; move the platform down 15mm",
"G92 E0 ; zero extruder",
"G1 F200 E3 ; extrude 3mm of feed stock",
"G92 E0 ; zero extruder",
"G1 F4000 ; set default feed rate",
"G92 E0 ; zero extruder",
";G5 ; uncomment to enable resume after power failure",
"M117 Printing..."
],
"post":[
"M107 ; turn off fan",
"M104 S0 T{tool} ; turn off extruder",
"M140 S0 T{tool} ; turn off bed",
"G91 ; relative positioning",
"G92 E0 ; zero extruder",
"G1 E-2 F300 ; retract filament",
"G1 Z0.5 E-5 ; retract filament, move z up",
"G28 ; home all axes",
"G90 ; absolute positioning",
"M82 ; absolute extrusion mode",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": true,
"extrude_abs": true,
"bed_circle": true,
"bed_width": 370,
"bed_depth": 370,
"build_height": 455
}
}

52
src/kiri-dev/fdm/Anycubic.i3.Mega Normal file
View file

@ -0,0 +1,52 @@
{
"pre":[
"M105 ; update temperature",
"M104 S{temp} T{tool}",
"M140 S{bed_temp} T{tool}",
"M109 S{temp} T{tool}",
"M190 S{bed_temp} T{tool}",
"M105 ; update temperature",
"G21 ; set metric values",
"G90 ; set absolute positioning",
"M82 ; set extruder to absolute mode",
"M107 ; turn off fan",
"G28 X0 Y0 ; move X/Y to min",
"G28 Z0 ; move Z to min",
"G1 Z15.0 F100 ; move the platform down 15mm",
"G92 E0 ; zero extruder",
"G1 F200 E3 ; extrude 3mm of feed stock",
"G92 E0 ; zero extruder",
"G1 F100 ; set default feed rate",
"G0 Y20 ; wipe move to Y20",
"G92 E0 ; zero extruder",
";G5 ; uncomment to enable resume after power failure",
"M117 Printing..."
],
"post":[
"M107 ; turn off fan",
"M104 S0 T{tool} ; turn off extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 210,
"bed_depth": 210,
"build_height": 205
}
}

27
src/kiri-dev/fdm/Atom.v2 Normal file
View file

@ -0,0 +1,27 @@
{
"pre":[
"M104 S{temp} ; set extruder temperature",
"M140 S{bed_temp} ; set bed temperature",
"G28 ; Home",
"G1 F5000 Z50 ; lift nozzle",
"G0 X0 Y-100 Z50 ; parking",
"G0 Z20 ; parking",
"G92 E0 ; zero the extruded length",
"G1 F200 E3 ; extrude 3mm of feed stock"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 ; turn off right extruder",
"M140 S0 ; turn off bed"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": true,
"bed_width": 210,
"bed_depth": 210,
"bed_circle": true,
"build_height": 320
}
}

57
src/kiri-dev/fdm/Creality.CR-10S Normal file
View file

@ -0,0 +1,57 @@
{
"pre":[
"M140 S{bed_temp} ; Set bed temp",
"M105 ; Report Temps",
"M190 S{bed_temp} ; Wait for bed to reach target",
"M104 S{temp} ; Set hot end temp",
"M105 ; Report Temps",
"M109 S{temp} ; Wait for hot end to reach target",
"M82 ; Absolute extrusion mode",
"M201 X500.00 Y500.00 Z100.00 E5000.00 ; Setup machine max acceleration",
"M203 X500.00 Y500.00 Z10.00 E50.00 ; Setup machine max feedrate",
"M204 P500.00 R1000.00 T500.00 ; Setup Print/Retract/Travel acceleration",
"M205 X8.00 Y8.00 Z0.40 E5.00 ; Setup Jerk",
"M220 S100 ; Reset Feedrate",
"M221 S100 ; Reset Flowrate",
"G28 ; Home",
"G92 E0 ; Reset Extruder",
"G1 Z2.0 F3000 ; Move Z Axis up",
"G1 X10.1 Y20 Z0.28 F5000.0 ; Move to start position",
"G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ; Draw the first line",
"G1 X10.4 Y200.0 Z0.28 F5000.0 ; Move to side a little",
"G1 X10.4 Y20 Z0.28 F1500.0 E30 ; Draw the second line",
"G92 E0 ; Reset Extruder",
"G1 Z2.0 F3000 ; Move Z Axis up",
"G92 E0 ; Reset Extruder"
],
"post":[
"M107 ; Turn off cooling fan",
"G91 ; Relative positioning",
"G1 E-2 F2700 ; Retract",
"G1 Z10 ; Raise Z",
"G90 ; Absolute positioning",
"G1 X0 Y300 ; Eject print",
"M104 S0 ; Turn-off hot end",
"M140 S0 ; Turn-off bed",
"M84 X Y E ; Disable steppers except Z"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 300,
"bed_depth": 300,
"build_height": 400
}
}

58
src/kiri-dev/fdm/Creality.CR-10S-Pro Normal file
View file

@ -0,0 +1,58 @@
{
"pre":[
"M140 S{bed_temp} ; Set bed temp",
"M105 ; Report Temps",
"M190 S{bed_temp} ; Wait for bed to reach target",
"M104 S{temp} ; Set hot end temp",
"M105 ; Report Temps",
"M109 S{temp} ; Wait for hot end to reach target",
"M82 ; Absolute extrusion mode",
"M201 X500.00 Y500.00 Z100.00 E5000.00 ; Setup machine max acceleration",
"M203 X500.00 Y500.00 Z10.00 E50.00 ; Setup machine max feedrate",
"M204 P500.00 R1000.00 T500.00 ; Setup Print/Retract/Travel acceleration",
"M205 X8.00 Y8.00 Z0.40 E5.00 ; Setup Jerk",
"M220 S100 ; Reset Feedrate",
"M221 S100 ; Reset Flowrate",
"G28 ; Home",
"G29 ; Auto bed Level",
"G92 E0 ; Reset Extruder",
"G1 Z2.0 F3000 ; Move Z Axis up",
"G1 X10.1 Y20 Z0.28 F5000.0 ; Move to start position",
"G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ; Draw the first line",
"G1 X10.4 Y200.0 Z0.28 F5000.0 ; Move to side a little",
"G1 X10.4 Y20 Z0.28 F1500.0 E30 ; Draw the second line",
"G92 E0 ; Reset Extruder",
"G1 Z2.0 F3000 ; Move Z Axis up",
"G92 E0 ; Reset Extruder"
],
"post":[
"M107 ; Turn off cooling fan",
"G91 ; Relative positioning",
"G1 E-2 F2700 ; Retract",
"G1 Z10 ; Raise Z",
"G90 ; Absolute positioning",
"G1 X0 Y300 ; Eject print",
"M104 S0 ; Turn-off hot end",
"M140 S0 ; Turn-off bed",
"M84 X Y E ; Disable steppers except Z"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 300,
"bed_depth": 300,
"build_height": 400
}
}

173
src/kiri-dev/fdm/Creality.CR-30 Normal file
View file

@ -0,0 +1,173 @@
{
"pre":[
"G28 ; home axes",
"G1 Y50 F1000 ; lift y axis off belt for heating",
"M107 ; turn off filament cooling fan",
"M140 S{bed_temp} ; set bed temp",
"M104 S{temp} ; set hot end temp",
"M105 ; report temps",
"M190 S{bed_temp} ; wait for bed",
"M105 ; report temps",
"M109 S{temp} ; wait for hot end",
"M82 ; absolute extrusion mode",
"G90 ; absolute positioning mode",
"G21 ; use metric values",
"G92 E0 ; reset filament position",
"G1 Y0.15 ; move head to belt",
"G1 X200 E50 F800 ; extruder purge line",
"G1 Z0.3 ; shift belt away 0.3mm",
"G1 X0 E100 ; extruder purge line",
"G92 Z0 E0 ; reset bed + extruder position",
"M117 CR-30 Printing..."
],
"post":[
"M107 ; disable cooling fan",
"M106 P0 S0 ; disable cooling fan",
"M104 S0 ; shut down hot end",
"M140 S0 ; shut down bed",
"G92 E1 ; set filament position",
"G1 E-1 F300 ; retract filament",
"G28 X ; home X axis",
"G1 Y50 F1000 ; lift y axis",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}",
"progress": "M117 {progress}% layer {layer} / {layers}",
"layer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
]
},
"settings":{
"image_url": "/decal/3dprintmill.png",
"image_anchor": 0,
"image_scale": 1,
"origin_center": false,
"extrude_abs": true,
"bed_belt": true,
"bed_width": 220,
"bed_depth": 350,
"build_height": 170
},
"profiles":[{
"processName": "CR30 PLA",
"sliceHeight": 0.20,
"sliceShells": 3,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillOverlap": 0.3,
"sliceFillSparse": 0.2,
"sliceFillType": "linear",
"sliceFillRepeat": 3,
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.4,
"sliceSupportGap": 0,
"sliceSupportSize": 6,
"sliceSupportArea": 0.25,
"sliceSupportExtra": 0,
"sliceSupportAngle": 1,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 15,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerRate": 10,
"firstLayerPrintMult": 1.0,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBeltLead": 0,
"firstLayerFanSpeed": 0,
"outputLoops": 0,
"outputTemp": 210,
"outputFanMax": 255,
"outputBedTemp": 70,
"outputFanSpeed": 255,
"outputFeedrate": 30,
"outputFinishrate": 30,
"outputSeekrate": 80,
"outputShellMult": 1.15,
"outputFillMult": 1.15,
"outputSparseMult": 1.15,
"outputFanLayer": 0,
"outputRetractDist": 6,
"outputRetractSpeed": 70,
"outputRetractWipe": 0,
"outputRetractDwell": 0,
"outputShortPoly": 50.0,
"outputMinSpeed": 5.0,
"outputCoastDist": 0.1,
"outputWipeDistance": 0,
"outputLayerRetract": false,
"detectThinWalls": false,
"zHopDistance": 0,
"antiBacklash": 0
},{
"processName": "CR30 PETG",
"sliceHeight": 0.20,
"sliceShells": 3,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillOverlap": 0.3,
"sliceFillSparse": 0.2,
"sliceFillType": "linear",
"sliceFillRepeat": 3,
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.4,
"sliceSupportGap": 0,
"sliceSupportSize": 6,
"sliceSupportArea": 0.25,
"sliceSupportExtra": 0,
"sliceSupportAngle": 1,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 15,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerRate": 10,
"firstLayerPrintMult": 1.0,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBeltLead": 0,
"firstLayerFanSpeed": 0,
"outputLoops": 0,
"outputTemp": 240,
"outputFanMax": 0,
"outputBedTemp": 70,
"outputFanSpeed": 0,
"outputFeedrate": 30,
"outputFinishrate": 30,
"outputSeekrate": 80,
"outputShellMult": 1.15,
"outputFillMult": 1.15,
"outputSparseMult": 1.15,
"outputFanLayer": 0,
"outputRetractDist": 6,
"outputRetractSpeed": 70,
"outputRetractWipe": 0,
"outputRetractDwell": 0,
"outputShortPoly": 50.0,
"outputMinSpeed": 5.0,
"outputCoastDist": 0.1,
"outputWipeDistance": 0,
"outputLayerRetract": false,
"detectThinWalls": false,
"zHopDistance": 0,
"antiBacklash": 0
}]
}

97
src/kiri-dev/fdm/Creality.Ender.3 Normal file
View file

@ -0,0 +1,97 @@
{
"pre":[
"M107 ; turn off filament cooling fan",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
"M104 S{temp} ; set extruder temperature",
"M140 S{bed_temp} ; set bed temperature",
"G28 ; home axes",
"G92 E0 ; reset extruder position",
"M109 S{temp} ; wait for extruder to reach target temp",
"M190 S{bed_temp} ; wait for bed to reach target temp"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 X0 Y300 F1200 ; end move eject bed",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 220,
"bed_depth": 220,
"build_height": 300
},
"profiles":[{
"processName": "Ender3 PLA",
"sliceHeight": 0.25,
"sliceShells": 3,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.35,
"sliceFillSparse": 0.2,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.4,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 0.25,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 0,
"firstLayerBedTemp": 0,
"firstLayerRate": 20,
"firstLayerFillRate": 35,
"firstLayerPrintMult": 1.10,
"firstLayerLineMult": 1.0,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputFanMax": 255,
"outputBedTemp": 70,
"outputFanSpeed": 255,
"outputFeedrate": 50,
"outputFinishrate": 40,
"outputSeekrate": 80,
"outputShellMult": 1.2,
"outputFillMult": 1.2,
"outputSparseMult": 1.2,
"outputBrimCount": 2,
"outputBrimOffset": 2,
"outputRetractDist": 5,
"outputRetractSpeed": 40,
"outputRetractWipe": 1,
"outputRetractDwell": 20,
"outputShortPoly": 50.0,
"outputMinSpeed": 10.0,
"outputCoastDist": 0.1,
"outputLayerRetract": false,
"detectThinWalls": false,
"zHopDistance": 0,
"antiBacklash": 0
}]
}

39
src/kiri-dev/fdm/Creality.Ender.5 Normal file
View file

@ -0,0 +1,39 @@
{
"pre":[
"M107 ; turn off filament cooling fan",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G28 ; home axes",
"G92 E0 ; reset extruder position",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"M190 S{bed_temp} T{tool} ; wait for bed to reach target temp"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G28 XY ; home XY",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 220,
"bed_depth": 220,
"build_height": 300
}
}

39
src/kiri-dev/fdm/Creality.Ender.6 Normal file
View file

@ -0,0 +1,39 @@
{
"pre":[
"M107 ; turn off filament cooling fan",
"M82 ; set absolute positioning for extruder",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G28 ; home axes",
"G92 E0 ; reset extruder position",
"G0 Z2 ; park Z at 2mm over bed for heating",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"M190 S{bed_temp} T{tool} ; wait for bed to reach target temp"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G28 XY ; home XY",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 250,
"bed_depth": 250,
"build_height": 400
}
}

153
src/kiri-dev/fdm/Creality.Sermoon.D1 Normal file
View file

@ -0,0 +1,153 @@
{
"pre":[
"M107 ; turn off filament cooling fan",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G28 ; home axes",
"G92 E0 ; reset extruder position",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"M190 S{bed_temp} T{tool} ; wait for bed to reach target temp"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G28 XY ; home XY",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 280,
"bed_depth": 260,
"build_height": 310
},
"profiles":[{
"processName": "Sermoon PLA",
"sliceHeight": 0.25,
"sliceShells": 3,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.35,
"sliceFillSparse": 0.2,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 0.25,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 0,
"firstLayerBedTemp": 0,
"firstLayerRate": 20,
"firstLayerFillRate": 35,
"firstLayerPrintMult": 1.10,
"firstLayerLineMult": 1.0,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 210,
"outputFanMax": 255,
"outputBedTemp": 70,
"outputFanSpeed": 255,
"outputFeedrate": 55,
"outputFinishrate": 50,
"outputSeekrate": 80,
"outputShellMult": 1.2,
"outputFillMult": 1.3,
"outputSparseMult": 1.3,
"outputBrimCount": 2,
"outputBrimOffset": 2,
"outputRetractDist": 1,
"outputRetractSpeed": 50,
"outputRetractWipe": 0,
"outputRetractDwell": 10,
"outputShortPoly": 50.0,
"outputMinSpeed": 10.0,
"outputCoastDist": 0,
"outputLayerRetract": false,
"detectThinWalls": false,
"zHopDistance": 0,
"antiBacklash": 0
},{
"processName": "Sermoon PETG",
"sliceHeight": 0.25,
"sliceShells": 3,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillWidth": 1,
"sliceFillOverlap": 0.35,
"sliceFillSparse": 0.2,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.6,
"sliceSupportGap": 1,
"sliceSupportSize": 6,
"sliceSupportArea": 0.25,
"sliceSupportExtra": 0,
"sliceSupportAngle": 50,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 1,
"sliceSolidLayers": 3,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerNozzleTemp": 0,
"firstLayerBedTemp": 0,
"firstLayerRate": 20,
"firstLayerFillRate": 35,
"firstLayerPrintMult": 1.10,
"firstLayerLineMult": 1.0,
"firstLayerFanSpeed": 0,
"outputRaft": false,
"outputRaftSpacing": 0.2,
"outputTemp": 230,
"outputFanMax": 255,
"outputBedTemp": 85,
"outputFanSpeed": 255,
"outputFeedrate": 55,
"outputFinishrate": 50,
"outputSeekrate": 100,
"outputShellMult": 1.2,
"outputFillMult": 1.3,
"outputSparseMult": 1.3,
"outputBrimCount": 2,
"outputBrimOffset": 2,
"outputRetractDist": 1.5,
"outputRetractSpeed": 50,
"outputRetractWipe": 0,
"outputRetractDwell": 10,
"outputShortPoly": 50.0,
"outputMinSpeed": 10.0,
"outputCoastDist": 0,
"outputLayerRetract": false,
"detectThinWalls": false,
"zHopDistance": 0,
"antiBacklash": 0
}]}

37
src/kiri-dev/fdm/Cubicon.Single+ Normal file
View file

@ -0,0 +1,37 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"M190 S{bed_temp} T{tool} ; set bed temperature",
"M109 S{temp} T{tool} ; set extruder temperature",
"M901 S35 ; set chamber temperature to 35 (standard)",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 ; home axes",
"G29 ; level bed",
"G92 E0 ; reset all axes positions",
"G1 X0 Y0 Z0.25 F180 ; move xy to 0,0 and z 0.25mm over bed",
"G92 E0 ; zero the extruder",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 ; turn off bed",
"M904 ; park extruder",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"file-ext": "hvs",
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 240,
"bed_depth": 190,
"build_height": 200
}
}

32
src/kiri-dev/fdm/Cubicon.Style Normal file
View file

@ -0,0 +1,32 @@
{
"pre":[
"T{tool} ; select extruder #0",
"M104 S{temp} ; set nozzle temp",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"M109 S{temp} ; wait for nozzle to heat",
"S210 T{tool} ; wait for heating?",
"M82 ; absolute extrusion mode",
"G28 ; home",
"G1 Z15 F6000 ; lower platform 15mm",
"G92 E0 ; zero out extruder position",
"G1 F200 E3 ; prime the extruder 3mm"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 ; turn off bed",
"M904 ; park extruder",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"file-ext": "hvs",
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 150,
"bed_depth": 150,
"build_height": 150
}
}

31
src/kiri-dev/fdm/DeltaMaker.2T Normal file
View file

@ -0,0 +1,31 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"G21 ; Make sure we're in metric mode",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"G28 ; home axes",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 F200 E3.5 ; set feed speed, prime nozzle",
"G92 E0 ; zero the extruded",
"G1 Z30 ; position near the bed before first position"
],
"post":[
"G28 ; home axes",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"nozzle_size": 0.5,
"origin_center": true,
"bed_width": 240,
"bed_depth": 240,
"bed_circle": true,
"build_height": 480
}
}

31
src/kiri-dev/fdm/DeltaMaker.Original Normal file
View file

@ -0,0 +1,31 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"G21 ; Make sure we're in metric mode",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"G28 ; home axes",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 F200 E3.5 ; set feed speed, prime nozzle",
"G92 E0 ; zero the extruded",
"G1 Z30 ; position near the bed before first position"
],
"post":[
"G28 ; home axes",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"nozzle_size": 0.35,
"origin_center": true,
"bed_width": 240,
"bed_depth": 240,
"bed_circle": true,
"build_height": 260
}
}

40
src/kiri-dev/fdm/FLSUN.QQ-S Normal file
View file

@ -0,0 +1,40 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M190 S{bed_temp} T0 ; wait for bed to reach target temp",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M105 ; report temperatures",
"M82 ; absolute extrusion mode",
"G21 ; metric values",
"G90 ; absolute positioning",
"M82 ; set extruder to absolute mode",
"M107 ; start with the fan off",
"G28 ; Home all axes (max endstops)",
"G1 Z15.0 F9000 ; move the platform down 15mm",
"G92 E0 ; zero the extruded length",
"G1 F200 E3 ; extrude 3mm of feed stock",
"G92 E0 ; zero the extruded length again",
"G1 F9000 ; set default move speed",
"M117 Printing...",
"G92 E0"
],
"post":[
"G28 ; home axes",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"M107 ; fan off",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"nozzle_size": 0.4,
"origin_center": true,
"bed_width": 260,
"bed_depth": 260,
"bed_circle": true,
"build_height": 320
}
}

29
src/kiri-dev/fdm/Flashforge.Finder Normal file
View file

@ -0,0 +1,29 @@
{
"pre":[
"M118 X15.00 Y15.00 Z10.00 T{tool}",
"M104 S{temp} T{tool}",
"M107",
"G90",
"M132 X Y Z A B",
"M907 X100 Y100 Z40 A80 B20",
"; pre-extrude",
"G1 X-75 Y-75 Z0.35 F400",
"G1 Y75 E30 F1800"
],
"post":[
"M107",
"M104 S0 T{tool}",
"G162 Z",
"M18"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": true,
"extrude_abs": true,
"bed_width": 140,
"bed_depth": 140,
"build_height": 140
}
}

43
src/kiri-dev/fdm/Flashforge.Guider.II Normal file
View file

@ -0,0 +1,43 @@
{
"pre":[
"; set bed and nozzle temps",
"M104 S{temp} T{tool}",
"M140 S{bed_temp}",
"; absolute positioning and home",
"G90",
"G28",
"; wait for nozzle and bed to reach target temps",
"M190 S{bed_temp}",
"M109 S{temp} T{tool}",
"M7 T{tool}",
"M6 T{tool}",
"; select nozzle 0",
"M108 T{tool}",
"G92 E0",
"G1 E0 F300",
"; purge nozzle",
"G1 X150 Y75 Z15 E-2 F500",
"G1 Y125 Z0.5 F600",
"G1 Y50 E40 F600"
],
"post":[
"; stop fan, cool nozzle and bed",
"M107",
"M104 S0 T{tool}",
"M140 S0",
"; slow descent of bed",
"G0 F300",
"; end print",
"M18"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": true,
"extrude_abs": true,
"bed_width": 280,
"bed_depth": 250,
"build_height": 300
}
}

44
src/kiri-dev/fdm/FolgerTech.FT5 Normal file
View file

@ -0,0 +1,44 @@
{
"pre":[
"M117 Heating",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 ; home axes",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 X0 Y5 Z3 ; move XY to 0,5 and Z 3mm over bed",
"M190 S{bed_temp} T{tool} ; wait for bed to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G0 Z0.25 ; position 0.25mm over bed",
"M117 Purge Nozzle",
"G1 X100 E30 F600 ; purge 30mm from extruder",
"M201 X1000 Y1000 Z100 E2000 ; max accel",
"M204 P1000 T2000 ; default accel",
"M301 P17.14 I1.12 D65.29 ; pid params",
"M900 K{kfactor} ; k factor",
"M205 X5 ; max xy jerk"
],
"post":[
"M117 Done",
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off extruder",
"M140 S0 T{tool} ; turn off bed",
"G91 ; relative movement",
"G1 Z10 F1200 ; drop bed 10mm",
"G90 ; absolute positioning",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}",
"progress": "M117 {progress}% layer {layer} / {layers}"
},
"settings":{
"origin_center": false,
"bed_width": 300,
"bed_depth": 300,
"build_height": 300
}
}

43
src/kiri-dev/fdm/GridBot.One Normal file
View file

@ -0,0 +1,43 @@
{
"pre":[
"M117 Heating ; announce heating",
"M107 ; turn off filament cooling fan",
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"G28 ; home axes",
"G1 F3000 ; set default move speed",
"M190 S{bed_temp} T0 ; wait for bed to reach target temp",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M117 Purge ; announce purge",
"G92 E0 ; set extruder position to 0",
"G1 E20 F250 ; purge 20mm from extruder",
"G1 X0 Y0 Z0 E1 F3000 ; move to origin / wipe",
"M117 Start Print ; announce start of print"
],
"post":[
"M117 Done ; announce done",
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off extruder",
"M140 S0 T0 ; turn off bed",
"G91 ; relative movement",
"G1 Z10 F1200 ; drop bed 10mm",
"G90 ; absolute positioning",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}",
"progress": "M117 {progress}% layer {layer} / {layers}"
},
"settings":{
"image_url": "/decal/gridbot.png",
"image_anchor": 0,
"image_scale": 1,
"origin_center": false,
"bed_width": 300,
"bed_depth": 300,
"build_height": 300
}
}

1
src/kiri-dev/fdm/GridBot.Two Symbolic link
View file

@ -0,0 +1 @@
GridBot.One

75
src/kiri-dev/fdm/IMADE3D.JellyBOX.Original Normal file
View file

@ -0,0 +1,75 @@
{
"pre":[
";---------------------------------------",
"; ; ; Jellybox Start Script Begin ; ; ;",
";_______________________________________",
"; for slicer: Kiri",
"; start gcode last modified Mar 28, 2019",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M117 Preparing ;write Preparing",
"M190 S45 ;wait for the bed to reach 45C",
"M109 S180 ;wait for the extruder to reach 180C",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z15 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; M300 S440 P300 ;play a tone",
"G4 P200 ;pause",
"; M0 Click to start print ; optional, recommended only with a rotary encoder",
"M117 Print starting ;write Print starting",
";================ ;PRINT:LINE start",
"G90 ;absolute positioning",
"M83 ;relative extrusion mode",
"G0 Z0 ;get Z down",
"G1 E18 F500 ;extrude __mm of feed stock",
"G1 E16 F400 ;extrude __mm of feed stock",
"G1 E8 F400 ;extrude __mm of feed stock",
"G4 S2 ;pause for ooze",
"M400 ;make sure all is finished",
"G0 F500 X3 Y0 Z0.6;get to the start of the LINE",
"G1 E2 F300 ;extrude __mm of feed stock",
"G1 F1000 X104 E10 ;print a thick LINE extruding __mm along the way",
"G92 E0 ;reset the extruder position",
";---------------------------------------------",
"; ; ; Jellybox Printer Start Script End ; ; ;",
";_____________________________________________"
],
"post":[
";---------------------------------",
";;; Jellybox End Script Begin ;;;",
";_________________________________",
"; end gcode last modified Nov 30, 2018",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2500 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";---------------------------------------",
";;; Jellybox End Script End ;;;",
";_______________________________________"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 170,
"bed_depth": 145,
"build_height": 140
}
}

75
src/kiri-dev/fdm/IMADE3D.JellyBOX2 Normal file
View file

@ -0,0 +1,75 @@
{
"pre":[
";---------------------------------------",
"; ; ; Jellybox Start Script Begin ; ; ;",
";_______________________________________",
"; for slicer: Kiri",
"; start gcode last modified Mar 28, 2019",
"G21 ;metric values",
"G90 ;absolute positioning",
"M107 ;start with the fan off",
"M117 Preparing ;write Preparing",
"M190 S45 ;wait for the bed to reach 45C",
"M109 S180 ;wait for the extruder to reach 180C",
"G28 ;home all axes",
"G29 O ;auto bed leveling procedure only if leveling NOT active",
";M500 ;optionally save the mesh",
"G28 X ;home x to get as far from the plate as possible",
"M420 S1 ;(re) enable bed leveling if turned off by the G28",
"G0 Y0 F5000 ;position Y in front",
"G0 Z15 F3000 ;position Z",
"M190 S{bed_temp} T{tool} ;wait for the bed to reach desired temperature",
"M109 S{temp} T{tool} ;wait for the extruder to reach desired temperature",
"; M300 S440 P300 ;play a tone",
"G4 P200 ;pause",
"; M0 Click to start print ; optional, recommended only with a rotary encoder",
"M117 Print starting ;write Print starting",
";================ ;PRINT:LINE start",
"G90 ;absolute positioning",
"M83 ;relative extrusion mode",
"G0 Z0 ;get Z down",
"G1 E18 F500 ;extrude __mm of feed stock",
"G1 E16 F400 ;extrude __mm of feed stock",
"G1 E8 F400 ;extrude __mm of feed stock",
"G4 S2 ;pause for ooze",
"M400 ;make sure all is finished",
"G0 F500 X3 Y0 Z0.6;get to the start of the LINE",
"G1 E2 F300 ;extrude __mm of feed stock",
"G1 F1000 X104 E10 ;print a thick LINE extruding __mm along the way",
"G92 E0 ;reset the extruder position",
";---------------------------------------------",
"; ; ; Jellybox Printer Start Script End ; ; ;",
";_____________________________________________"
],
"post":[
";---------------------------------",
";;; Jellybox End Script Begin ;;;",
";_________________________________",
"; end gcode last modified Nov 30, 2018",
"M117 Finishing Up ;write Finishing Up",
"M107 ;turn the fan off",
"M104 S0 ;extruder heater off",
"M140 S0 ;bed heater off (if you have it)",
"G91 ;relative positioning (includes extruder)",
"G1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure",
"G1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more",
"G1 E-25 F2500 ;retract even more",
"G90 ;absolute positioning (includes extruder)",
"G28 X ;home X so the head is out of the way",
"G1 Y140 ;move Y forward, so the print is more accessible",
"M84 ;steppers off",
"M117 Print finished ;write Print finished",
";---------------------------------------",
";;; Jellybox End Script End ;;;",
";_______________________________________"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 177,
"bed_depth": 155,
"build_height": 140
}
}

35
src/kiri-dev/fdm/Leapfrog.CreatrHS Normal file
View file

@ -0,0 +1,35 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 X0 Y0 ; home XY axes",
"G28 Z0 ; home Z axis",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F300 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 270,
"bed_depth": 280,
"build_height": 180
}
}

37
src/kiri-dev/fdm/MakerGear.M2 Normal file
View file

@ -0,0 +1,37 @@
{
"pre":[
"M108 S255 ; set extruder speed",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 XY ; home XY axes",
"G28 Z ; home Z axis",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F300 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M108 S0 ; set extruder speed",
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z200 F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 200,
"bed_depth": 250,
"build_height": 200
}
}

44
src/kiri-dev/fdm/Makerbot.Replicator2 Normal file
View file

@ -0,0 +1,44 @@
{
"pre":[
"M73 P0 ; set progress to 0%",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M104 S{temp} T{tool} ; set extruder temperature for T{tool} (tool 0)",
"M127 ; close extruder valve (if it has one)",
"G162 X Y F3000 ; move X,Y axis to maximum position at speed 3000 (top/right of table)",
"G161 Z F1200 ; move Z axis to minimum position as speed 1200 (bottom)",
"G92 Z-5 ; set Z axis value to -5 (no move)",
"G1 Z0 ; move Z axis to 0 (lifting it 5mm off endstop)",
"G161 Z F100 ; move Z axis to minimum position at speed 100",
"M132 X Y Z A B ; load EEPROM home offsets for all axis",
"G1 X{left} Y{bottom+10} Z30 F9000 ; move to wait position off table",
"G130 X20 Y20 Z20 A20 B20 ; lower stepper Vrefs to give more juice to the extruder heater",
"M133 T{tool} ; wait for extruder T{tool} temperature to stabilize",
"G130 X127 Y127 Z40 A127 B127 ; default stepper Vrefs now that extruder is hot",
"G92 A0 ; set extruder position value to 0 (no move)",
"G1 Z0.4 ; move nozzle just above the bed height",
"G1 E25 F300 ; purge extruder for 25mm at speed 300",
"G1 X{left+10} Y{bottom+10} Z0.15 F1200 ; slow wipe",
"G1 X{left+15} Y{bottom+15} Z0.5 F1200 ; lift",
"G92 A0 ; set extruder position value to 0 (no move)",
"M135 T{tool} ; set toolhead 0"
],
"post":[
"M127 ; stop filament cooling fan",
"M73 P100 ; set build progress to 100%",
"G1 Z150 F1000 ; send Z axis to bottom (engaging end stop)",
"G162 X Y F3000 ; move X,Y axis to maximum position at speed 3000 (top/right of table)",
"M18 ; disable all stepper motors",
"M72 P1 ; play song 1 (tada)"
],
"cmd":{
"fan_power": "M126 S{fan_speed}",
"progress": "M73 P{progress}"
},
"settings":{
"origin_center": true,
"bed_width": 300,
"bed_depth": 175,
"build_height": 150
}
}

37
src/kiri-dev/fdm/Prusa.i3.MK2S Normal file
View file

@ -0,0 +1,37 @@
{
"pre":[
"M83 ; extruder relative mode",
"M104 S160 ; set extruder to a temporary high enough temp",
"M140 S{bed_temp} ; set bed temp",
"M190 S{bed_temp} ; wait for bed temp",
"M109 S160 ; wait for extruder temporary high enough temp",
"G28 W ; home all without mesh bed level",
"G80 ; mesh bed leveling",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"G1 Y-3.0 F1000.0 ; go outside print area",
"M104 S{temp} ; set extruder actual required temp",
"M109 S{temp} ; wait for extruder actual required temp",
"G1 X60.0 E9.0 F1000.0 ; intro line",
"G1 X100.0 E12.5 F1000.0 ; intro line",
"M900 K{kfactor} ; set Linear Advance factor, see https://www.prusaprinters.org/fw-3-1-0-linear-advance-drivers-1-9-1/"
],
"post":[
"G4 ; wait",
"M104 S0 ; turn off temperature",
"M140 S0 ; turn off heatbed",
"M107 ; turn off fan",
"G1 X0 Y200; home X axis",
"G1 E-1 F900",
"M84 ; disable motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 250,
"bed_depth": 210,
"build_height": 210
}
}

65
src/kiri-dev/fdm/Raise3D.N2 Normal file
View file

@ -0,0 +1,65 @@
{
"pre":[
"M140 S{bed_temp}",
"M221 T{tool} S100.00",
"M104 T{tool} S{temp}",
"M109 T{tool} S{temp}",
"M190 S{bed_temp}",
"G21",
"G90",
"M82",
"M107",
"G28 X0 Y0",
"G28 Z0",
"T{tool}",
"G1 Z0.05 F6000.00",
"G92 E0",
"G1 F140 E29",
"G4 P500",
"G1 X15 Y15 Z0.02 F2000",
"G1 F6000.00",
"M117 Printing...",
"M1001"
],
"post":[
"G91",
"G1 Z10",
"G90",
"M1002",
"M104 T{tool} S0",
"M104 S0",
"M140 S0",
"G1 X20 Y20 F6000",
"G1 X0 Y0",
"M84",
";Print Time: {time}",
";Material#1 Used: {material}",
";Material#2 Used: 0.0"
],
"pause":[
"; --- pause begin ---",
"G91 ; Relative Positioning",
"G0 Z20 ; Move Bed down 20mm",
"G90 ; Absolute positioning",
"G0 X10 Y10 ; Move to 10,10",
"M2000 ; Pause command",
"G91 ; Relative Positioning",
"G0 Z-20 ; Move Bed up 20mm",
"G90 ; Absolute positioning",
"; --- pause end ---"
],
"cmd":{
"fan_power": "M106 S{fan_speed}",
"layer": [
";LAYER:{layer}",
";HEIGHT:{height}"
]
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 310,
"bed_depth": 310,
"build_height": 305
}
}

166
src/kiri-dev/fdm/SainSmart.Infi-20 Normal file
View file

@ -0,0 +1,166 @@
{
"pre":[
"G28 XY ; home XY axes",
"G1 Y50 F1000 ; lift y axis off belt for heating",
"M107 ; turn off filament cooling fan",
"M140 S{bed_temp} ; set bed temp",
"M104 S{temp} ; set hot end temp",
"M105 ; report temps",
"M190 S{bed_temp} ; wait for bed",
"M105 ; report temps",
"M109 S{temp} ; wait for hot end",
"M82 ; absolute extrusion mode",
"G90 ; absolute positioning mode",
"G21 ; use metric values",
"G92 E0 ; reset filament position",
"G1 Y0.15 ; move head to belt",
"G1 X190 E50 F800 ; extruder purge line",
"G1 Z0.3 ; shift belt away 0.3mm",
"G1 X0 E100 ; extruder purge line",
"G92 Z0 E0 ; reset bed + extruder position",
"M117 CR-30 Printing..."
],
"post":[
"M107 ; disable cooling fan",
"M106 P0 S0 ; disable cooling fan",
"M104 S0 ; shut down hot end",
"M140 S0 ; shut down bed",
"G92 E1 ; set filament position",
"G1 E-1 F300 ; retract filament",
"G28 X ; home X axis",
"G1 Y50 F1000 ; lift y axis",
"M84 ; disable stepper motors"
],
"extruders":[
{
"nozzle": 0.4,
"filament": 1.75,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"cmd":{
"fan_power": "M106 S{fan_speed}",
"progress": "M117 {progress}% layer {layer} / {layers}",
"layer": [
";; --- layer {layer} {height} @ {z} ---",
"M117 {progress}% layer {layer} / {layers}"
]
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_belt": true,
"bed_width": 200,
"bed_depth": 300,
"build_height": 170
},
"profiles":[{
"processName": "SSI20 PLA",
"sliceHeight": 0.25,
"sliceShells": 3,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillOverlap": 0.3,
"sliceFillSparse": 0.2,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.4,
"sliceSupportGap": 0,
"sliceSupportSize": 6,
"sliceSupportArea": 0.25,
"sliceSupportExtra": 0,
"sliceSupportAngle": 1,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 15,
"sliceSolidLayers": 2,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerRate": 10,
"firstLayerPrintMult": 1.0,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBeltLead": 0,
"firstLayerFanSpeed": 0,
"outputTemp": 210,
"outputFanMax": 255,
"outputBedTemp": 70,
"outputFanSpeed": 255,
"outputFeedrate": 30,
"outputFinishrate": 30,
"outputSeekrate": 80,
"outputShellMult": 1.15,
"outputFillMult": 1.15,
"outputSparseMult": 1.15,
"outputFanLayer": 0,
"outputRetractDist": 6,
"outputRetractSpeed": 70,
"outputRetractWipe": 0,
"outputRetractDwell": 0,
"outputShortPoly": 50.0,
"outputMinSpeed": 5.0,
"outputCoastDist": 0.1,
"outputWipeDistance": 0,
"outputLayerRetract": false,
"detectThinWalls": false,
"zHopDistance": 0,
"antiBacklash": 0
},{
"processName": "SSI20 PETG",
"sliceHeight": 0.25,
"sliceShells": 3,
"sliceShellOrder": "in-out",
"sliceLayerStart": "last",
"sliceFillAngle": 45,
"sliceFillOverlap": 0.3,
"sliceFillSparse": 0.2,
"sliceFillType": "hex",
"sliceAdaptive": false,
"sliceMinHeight": 0,
"sliceSupportDensity": 0.25,
"sliceSupportOffset": 0.4,
"sliceSupportGap": 0,
"sliceSupportSize": 6,
"sliceSupportArea": 0.25,
"sliceSupportExtra": 0,
"sliceSupportAngle": 1,
"sliceSupportNozzle": 0,
"sliceSolidMinArea": 15,
"sliceSolidLayers": 2,
"sliceBottomLayers": 3,
"sliceTopLayers": 3,
"firstLayerRate": 10,
"firstLayerPrintMult": 1.0,
"firstLayerYOffset": 0,
"firstLayerBrim": 0,
"firstLayerBeltLead": 0,
"firstLayerFanSpeed": 0,
"outputTemp": 240,
"outputFanMax": 0,
"outputBedTemp": 70,
"outputFanSpeed": 0,
"outputFeedrate": 30,
"outputFinishrate": 30,
"outputSeekrate": 80,
"outputShellMult": 1.15,
"outputFillMult": 1.15,
"outputSparseMult": 1.15,
"outputFanLayer": 0,
"outputRetractDist": 6,
"outputRetractSpeed": 70,
"outputRetractWipe": 0,
"outputRetractDwell": 0,
"outputShortPoly": 50.0,
"outputMinSpeed": 5.0,
"outputCoastDist": 0.1,
"outputWipeDistance": 0,
"outputLayerRetract": false,
"detectThinWalls": false,
"zHopDistance": 0,
"antiBacklash": 0
}]
}

37
src/kiri-dev/fdm/TypeA.Series1 Normal file
View file

@ -0,0 +1,37 @@
{
"pre":[
"G1 Z15.0 F12000 ; move the platform down 15mm",
"G1 X150 Y5 F12000 ; center extruder on X",
"M107 ; turn off filament cooling fan",
"M83 ; use relative positioning for extruder",
"M104 S{temp} ; set extruder temperature",
"G21 ; use metric values",
"G90 ; use absolute positioning mode",
"G28 ; move to endstops",
"G29 ; perform auto-levelling",
"M109 S{temp} ; wait for extruder to reach target temp",
"G1 X150 Y5 Z0.3 ; move the platform to purge extrusion",
"G92 E0 ; zero the extruded length",
"G1 F200 X250 E30 ; extrude 30mm of feed stock",
"G92 E0 ; zero the extruded length again",
"G1 X150 Y150 Z25 F12000 ; center head for print",
"G1 F12000 ; set head seek rate"
],
"post":[
"G1 E-1 F300 ; retract the filament to release pressure",
"G1 Z{z_max} E-5 F1200 ; drop bed, retract more filament",
"G28 X0 Y0 ; move X/Y to min endstops",
"M107 ; turn off filament cooling fan",
"M104 S0 ; turn off extruder",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 305,
"bed_depth": 305,
"build_height": 305
}
}

40
src/kiri-dev/fdm/TypeA.Series1Pro Normal file
View file

@ -0,0 +1,40 @@
{
"pre":[
"G1 Z15.0 F12000 ; move the platform down 15mm",
"G1 X150 Y5 F12000 ; center extruder on X",
"M107 ; turn off filament cooling fan",
"M83 ; use relative positioning for extruder",
"M104 S{temp} ; set extruder temperature",
"M140 S{bed_temp} ; set bed temperature",
"G21 ; use metric values",
"G90 ; use absolute positioning mode",
"G28 ; move to endstops",
"G29 ; perform auto-levelling",
"M109 S{temp} ; wait for extruder to reach target temp",
"M190 S{bed_temp} ; wait for bed to reach target temp",
"G1 X150 Y5 Z0.3 ; move the platform to purge extrusion",
"G92 E0 ; zero the extruded length",
"G1 F200 X250 E30 ; extrude 30mm of feed stock",
"G92 E0 ; zero the extruded length again",
"G1 X150 Y150 Z25 F12000 ; center head for print",
"G1 F12000 ; set head seek rate"
],
"post":[
"G1 E-1 F300 ; retract the filament to release pressure",
"G1 Z{z_max} E-5 F1200 ; drop bed, retract more filament",
"G28 X0 Y0 ; move X/Y to min endstops",
"M107 ; turn off filament cooling fan",
"M104 S0 ; turn off extruder",
"M140 S0 ; turn off bed",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 305,
"bed_depth": 305,
"build_height": 305
}
}

43
src/kiri-dev/fdm/Ulio3D Normal file
View file

@ -0,0 +1,43 @@
{
"pre":[
"G21 ; set to mm",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
"M104 S{temp} ; set extruder temperature",
"M109 S{temp} ; wait for extruder to reach target temp",
"G28 X0 Y0 ; move X/Y to min endstops",
"G28 Z0 ; move Z to min endstops",
"G92 X0 Y0 Z0 ; reset all axes positions",
"G92 E0 ; reset extruder distance position (zero the extruder)",
"G1 F{travel_speed} ; set feed speed",
"M117 ULIO Printing ; text for screen"
],
"post":[
"M104 S0 ; turn off right extruder",
"M107 ; turn off filament cooling fan",
"G1 Z{z_max} F300 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"pause":[
"; --- pause begin ---",
"G91 ; Relative Positioning",
"G0 Z20 ; Move Bed down 20mm",
"G90 ; Absolute positioning",
"G0 X10 Y10 ; Move to 10,10",
"M2000 ; Pause command",
"G91 ; Relative Positioning",
"G0 Z-20 ; Move Bed up 20mm",
"G90 ; Absolute positioning",
"; --- pause end ---"
],
"cmd":{
"fan_power": "M106 S200"
},
"settings":{
"origin_center": false,
"bed_width": 103,
"bed_depth": 103,
"build_height": 78
}
}

59
src/kiri-dev/fdm/Ulio3D.Purge Normal file
View file

@ -0,0 +1,59 @@
{
"pre":[
"G21 ; set to mm",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
"M104 S{temp} ; set extruder temperature",
"M109 S{temp} ; wait for extruder to reach target temp",
"G28 X0 Y0 ; move X/Y to min endstops",
"G28 Z0 ; move Z to min endstops",
"G92 X0 Y0 Z0 ; reset all axes positions",
"G92 E0 ; reset extruder distance position (zero the extruder)",
"M83 ; set extruder in relative mode",
"G1 X100.0 E12 F1000 ; start perimiter leveling line",
"G1 Y102.0 E12 F1000 ;",
"G1 X2.0 E12 F1000 ;",
"G1 Y2.0 E12 F1000 ;",
"G1 X98.0 E12 F1000 ;",
"G1 Y100.0 E12 F1000 ;",
"G1 X4.0 E12 F1000 ;",
"G1 Y4.0 E12 F1000 ;",
"G1 X96.0 E12 F1000 ;",
"G1 Y98.0 E12 F1000 ;",
"G1 X6.0 E12 F1000 ;",
"G1 Y6.0 E12 F1000 ; finish perimiter leveling line",
"G28 X0 Y0 ; move X/Y to min endstops",
"M82 ; set absolute positioning for extruder",
"G92 E0 ; reset extruder distance position (zero the extruder)",
"G1 F{travel_speed} ; set feed speed",
"M117 ULIO Printing ; text for screen"
],
"post":[
"M104 S0 ; turn off right extruder",
"M107 ; turn off filament cooling fan",
"G1 Z{z_max} F300 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"pause":[
"; --- pause begin ---",
"G91 ; Relative Positioning",
"G0 Z20 ; Move Bed down 20mm",
"G90 ; Absolute positioning",
"G0 X10 Y10 ; Move to 10,10",
"M2000 ; Pause command",
"G91 ; Relative Positioning",
"G0 Z-20 ; Move Bed up 20mm",
"G90 ; Absolute positioning",
"; --- pause end ---"
],
"cmd":{
"fan_power": "M106 S200"
},
"settings":{
"origin_center": false,
"bed_width": 103,
"bed_depth": 103,
"build_height": 78
}
}

41
src/kiri-dev/fdm/Ultimaker.Ultimaker2 Normal file
View file

@ -0,0 +1,41 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
"M107 ; turn off filament cooling fan",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z205 F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"extruders":[
{
"nozzle": 0.4,
"filament": 2.85,
"offset_x": 0,
"offset_y": 0,
"select": [ "T0" ]
}
],
"settings":{
"origin_center": false,
"bed_width": 223,
"bed_depth": 223,
"build_height": 205,
"extrude_abs": true
}
}

33
src/kiri-dev/fdm/Wanhao.Duplicator_4s Normal file
View file

@ -0,0 +1,33 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 X0 Y0 ; home XY axes",
"G28 Z0 ; home Z",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 225,
"bed_depth": 145,
"build_height": 150
}
}

33
src/kiri-dev/fdm/Wanhao.Duplicator_5s Normal file
View file

@ -0,0 +1,33 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 X0 Y0 ; home XY axes",
"G28 Z0 ; home Z",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 305,
"bed_depth": 205,
"build_height": 575
}
}

33
src/kiri-dev/fdm/Wanhao.Duplicator_6 Normal file
View file

@ -0,0 +1,33 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 X0 Y0 ; home XY axes",
"G28 Z0 ; home Z",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 200,
"bed_depth": 200,
"build_height": 180
}
}

33
src/kiri-dev/fdm/Wanhao.Duplicator_i3 Normal file
View file

@ -0,0 +1,33 @@
{
"pre":[
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 X0 Y0 ; home XY axes",
"G28 Z0 ; home Z",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"bed_width": 200,
"bed_depth": 200,
"build_height": 180
}
}

31
src/kiri-dev/fdm/XYZ.daVinci.Jr.Pro Normal file
View file

@ -0,0 +1,31 @@
{
"pre":[
"T{tool} ; select extruder #0",
"M104 S{temp} ; set nozzle temp",
"M109 S{temp} ; wait for nozzle to heat",
"M82 ; absolute extrusion mode",
"G28 ; home",
"G1 Z15 F6000 ; lower platform 15mm",
"G92 E0 ; zero out extruder position",
"G1 F200 E3 ; prime the extruder 3mm"
],
"post":[
"M107 ; fan off",
"M104 S0 ; set nozzle temp to 0",
"M140 S0 ; set bed temp to 0",
"G92 E0 ; zero out extruder position",
"G1 E-1 F300 ; retract filament",
"G28 X0 Y0 ; home X Y",
"M84 ; disable steppers"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 150,
"bed_depth": 150,
"build_height": 150
}
}

32
src/kiri-dev/fdm/XYZ.daVinci.Mini.w Normal file
View file

@ -0,0 +1,32 @@
{
"pre":[
"T{tool} ; select extruder #0",
"M104 S{temp} ; set nozzle temp",
"M109 S{temp} ; wait for nozzle to heat",
"G21 ; set units to millimeters",
"M82 ; absolute extrusion mode",
"G28 ; home",
"G1 Z15 F6000 ; lower platform 15mm",
"G92 E0 ; zero out extruder position",
"G1 F200 E3 ; prime the extruder 3mm"
],
"post":[
"M107 ; fan off",
"M104 S0 ; set nozzle temp to 0",
"M140 S0 ; set bed temp to 0",
"G92 E0 ; zero out extruder position",
"G1 E-1 F300 ; retract filament",
"G28 X0 Y0 ; home X Y",
"M84 ; disable steppers"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"
},
"settings":{
"origin_center": false,
"extrude_abs": true,
"bed_width": 150,
"bed_depth": 150,
"build_height": 150
}
}