From 4b31aceb4cd2c7e46cac7e4b2a59d77c86181cc4 Mon Sep 17 00:00:00 2001 From: Stewart Allen Date: Sat, 11 Apr 2020 22:46:07 -0400 Subject: [PATCH] update notes --- notes.md | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/notes.md b/notes.md index 283c4e9e..a897c91b 100644 --- a/notes.md +++ b/notes.md @@ -2,7 +2,6 @@ ## `C` cosmetic, `F` functional, `P` performance, `B` bug fix -* `B` restore settings should restore all mode/device/settings (find corner cases) * `F` implement an in-app bug reporting system * `F` extend mesh object to store raw + annotations (rot,scale,pos) * share raw data w/ dups, encode/decode @@ -10,25 +9,22 @@ * `P` improve decimation speed by avoiding in/out of Point? * `P` server-side processing (determine protocol and storage) * `P` refactor / simplify POLY.expand (put onus on collector) -* `P` cloned objects should share same slice data unless rotated or scaled +* `P` duplicate objects should share same slice data unless rotated or scaled # FDM * `B` check for support / brim intersections on first layer -* `F` detect M82 / M83 in the gcode header and use appropriate setting over device * `F` manual support addition / control * `F` polishing and other non-planar work * `F` gradient infill https://www.youtube.com/watch?v=hq53gsYREHU&feature=emb_logo +* `F` feather sharp tips by reducing extrusion in area of overlap * `F` first layer segment large flat areas for better fill reliability -* `F` adaptive column to compensate for fine or layers that finish too quickly and melt +* `F` enable purge block when quick layers are detected * `F` apply finish speed to exposed top and underside flat areas * `F` expand internal supporting flats * `F` first layer support speed should be same as shell speed -* `F` add lay-flat auto-rotation or from selected face * `F` determine start point from gcode preamble * `F` trim support offset from layer below -* `F` feather sharp tips by reducing extrusion in area of overlap -* `F` multi extruder and swapping extruder support * `F` option to support interior bridges when 0% infill * `P` disable infill fingerprinting for gyroids * `P` refactor thin fill to use outline and inside poly normal dist to self @@ -38,6 +34,7 @@ * `B` fails in pancaking (clone) when there are no sliced layers (like z bottom too high) * `B` linear finishing should extend beyond part boundaries by tool radius * `B` outside cutting direction in roughing mode inverted +* `F` do not mill out thru-pockets. cut outline only. * `F` use arcs to connect hard angles * `F` do not rough areas that go all the way through the part https://github.com/GridSpace/grid-apps/issues/20 @@ -52,7 +49,7 @@ * `F` warn when part > stock or cuts go outside bed * `F` add M03 tool feedrate support * `P` refactor slicing around flats w/ interpolation instead of culling -* `P` optimize away topo generation (for z hop/move) when part is flat +* `P` disable topo generation when no linear xy and no depth first * `P` store tab and camshell polys in widget.topo to minimize z on edge moves * `P` linear finishing is going back to z top too often * `P` option to skip milling holes that would be drilled