move src/kiri/* to src/kiri/core and src/kiri-*/ to src/kiri/* and updated all imports

src/kiri/dev/fdm/Creality.Ender.6.json

@@ -0,0 +1,38 @@
+{
+    "pre":[
+        "M107                     ; turn off filament cooling fan",
+        "M82                      ; set absolute positioning for extruder",
+        "M104 S{temp} T{tool}     ; set extruder temperature",
+        "M140 S{bed_temp} T{tool} ; set bed temperature",
+        "G28                      ; home axes",
+        "G92 E0                   ; reset extruder position",
+        "G0 Z2                    ; park Z at 2mm over bed for heating",
+        "M109 S{temp} T{tool}     ; wait for extruder to reach target temp",
+        "M190 S{bed_temp} T{tool} ; wait for bed to reach target temp"
+    ],
+    "post":[
+        "M107                     ; turn off filament cooling fan",
+        "M104 S0 T{tool}          ; turn off right extruder",
+        "M140 S0 T{tool}          ; turn off bed",
+        "G28 XY                   ; home XY",
+        "M84                      ; disable stepper motors"
+    ],
+    "extruders":[
+        {
+            "nozzle": 0.4,
+            "filament": 1.75,
+            "offset_x": 0,
+            "offset_y": 0
+        }
+    ],
+    "cmd":{
+        "fan_power": "M106 S{fan_speed}"
+    },
+    "settings":{
+        "origin_center": false,
+        "extrude_abs": true,
+        "bed_width": 250,
+        "bed_depth": 250,
+        "build_height": 400
+    }
+}