AI_Assistant/grid-apps-cmms
Watch
1
0
Fork
You've already forked grid-apps-cmms
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

update T0 to T{tool}

Browse source
This commit is contained in:
Stewart Allen 2019-02-11 13:47:26 -05:00
commit 120dbeb804
20 changed files with 101 additions and 109 deletions
Download patch file Download diff file Expand all files Collapse all files

43
web/kiri/filter/FDM/Any.Generic.Marlin
View file

@ -1,29 +1,28 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 ; home axes",
"G29 ; level bed",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 X0 Y0 Z0.25 F180 ; move xy to 0,0 and z 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M190 S{bed_temp} T0 ; wait for bed to reach target temp",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 ; home axes",
"G29 ; level bed",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 X0 Y0 Z0.25 F180 ; move xy to 0,0 and z 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M190 S{bed_temp} T{tool} ; wait for bed to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
"M107 ; turn off filament cooling fan",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"
],
"cmd":{
"fan_power": "M106 S{fan_speed}"

10
web/kiri/filter/FDM/Cubicon.Single+
View file

@ -1,9 +1,9 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M190 S{bed_temp} T0 ; set bed temperature",
"M109 S{temp} T0 ; set extruder temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"M190 S{bed_temp} T{tool} ; set bed temperature",
"M109 S{temp} T{tool} ; set extruder temperature",
"M901 S35 ; set chamber temperature to 35 (standard)",
"G90 ; set absolute positioning mode",
"M82 ; set absolute positioning for extruder",
@ -18,7 +18,7 @@
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 ; turn off bed",
"M904 ; park extruder",
"M84 ; disable stepper motors"

8
web/kiri/filter/FDM/Cubicon.Style
View file

@ -1,10 +1,10 @@
{
"pre":[
"T0 ; select extruder #0",
"T{tool} ; select extruder #0",
"M104 S{temp} ; set nozzle temp",
"M140 S{bed_temp} T0 ; set bed temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"M109 S{temp} ; wait for nozzle to heat",
"S210 T0 ; wait for heating?",
"S210 T{tool} ; wait for heating?",
"M82 ; absolute extrusion mode",
"G28 ; home",
"G1 Z15 F6000 ; lower platform 15mm",
@ -13,7 +13,7 @@
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 ; turn off bed",
"M904 ; park extruder",
"M84 ; disable stepper motors"

8
web/kiri/filter/FDM/DeltaMaker.2T
View file

@ -1,20 +1,20 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"G21 ; Make sure we're in metric mode",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"G28 ; home axes",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 F200 E3.5 ; set feed speed, prime nozzle",
"G92 E0 ; zero the extruded",
"G1 Z30 ; position near the bed before first position"
],
"post":[
"G28 ; home axes",
"M104 S0 T0 ; turn off right extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"M84 ; disable stepper motors"
],
"cmd":{

8
web/kiri/filter/FDM/DeltaMaker.Original
View file

@ -1,20 +1,20 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"G21 ; Make sure we're in metric mode",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"G28 ; home axes",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 F200 E3.5 ; set feed speed, prime nozzle",
"G92 E0 ; zero the extruded",
"G1 Z30 ; position near the bed before first position"
],
"post":[
"G28 ; home axes",
"M104 S0 T0 ; turn off right extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"M84 ; disable stepper motors"
],
"cmd":{

6
web/kiri/filter/FDM/Flashforge.Finder
View file

@ -1,7 +1,7 @@
{
"pre":[
"M118 X15.00 Y15.00 Z10.00 T0",
"M104 S{temp} T0",
"M118 X15.00 Y15.00 Z10.00 T{tool}",
"M104 S{temp} T{tool}",
"M107",
"G90",
"M132 X Y Z A B",
@ -12,7 +12,7 @@
],
"post":[
"M107",
"M104 S0 T0",
"M104 S0 T{tool}",
"G162 Z",
"M18"
],

12
web/kiri/filter/FDM/Flashforge.Guider.II
View file

@ -1,18 +1,18 @@
{
"pre":[
"; set bed and nozzle temps",
"M104 S{temp} T0",
"M104 S{temp} T{tool}",
"M140 S{bed_temp}",
"; absolute positioning and home",
"G90",
"G28",
"; wait for nozzle and bed to reach target temps",
"M190 S{bed_temp}",
"M109 S{temp} T0",
"M7 T0",
"M6 T0",
"M109 S{temp} T{tool}",
"M7 T{tool}",
"M6 T{tool}",
"; select nozzle 0",
"M108 T0",
"M108 T{tool}",
"G92 E0",
"G1 E0 F300",
"; purge nozzle",
@ -23,7 +23,7 @@
"post":[
"; stop fan, cool nozzle and bed",
"M107",
"M104 S0 T0",
"M104 S0 T{tool}",
"M140 S0",
"; slow descent of bed",
"G0 F300",

12
web/kiri/filter/FDM/FolgerTech.FT5
View file

@ -1,16 +1,16 @@
{
"pre":[
"M117 Heating",
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
"G28 ; home axes",
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 X0 Y5 Z3 ; move XY to 0,5 and Z 3mm over bed",
"M190 S{bed_temp} T0 ; wait for bed to reach target temp",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M190 S{bed_temp} T{tool} ; wait for bed to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G0 Z0.25 ; position 0.25mm over bed",
"M117 Purge Nozzle",
"G1 X100 E30 F600 ; purge 30mm from extruder",
@ -23,8 +23,8 @@
"post":[
"M117 Done",
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off extruder",
"M140 S0 T{tool} ; turn off bed",
"G91 ; relative movement",
"G1 Z10 F1200 ; drop bed 10mm",
"G90 ; absolute positioning",

11
web/kiri/filter/FDM/Leapfrog.CreatrHS
View file

@ -1,7 +1,7 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -10,16 +10,15 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F300 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

11
web/kiri/filter/FDM/MakerGear.M2
View file

@ -1,8 +1,8 @@
{
"pre":[
"M108 S255 ; set extruder speed",
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -11,7 +11,7 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F300 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
@ -19,9 +19,8 @@
"post":[
"M108 S0 ; set extruder speed",
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z200 F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

6
web/kiri/filter/FDM/Makerbot.Replicator2
View file

@ -3,7 +3,7 @@
"M73 P0 ; set progress to 0%",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M104 S{temp} T0 ; set extruder temperature for T0 (tool 0)",
"M104 S{temp} T{tool} ; set extruder temperature for T{tool} (tool 0)",
"M127 ; close extruder valve (if it has one)",
"G162 X Y F3000 ; move X,Y axis to maximum position at speed 3000 (top/right of table)",
"G161 Z F1200 ; move Z axis to minimum position as speed 1200 (bottom)",
@ -13,7 +13,7 @@
"M132 X Y Z A B ; load EEPROM home offsets for all axis",
"G1 X{left} Y{bottom+10} Z30 F9000 ; move to wait position off table",
"G130 X20 Y20 Z20 A20 B20 ; lower stepper Vrefs to give more juice to the extruder heater",
"M133 T0 ; wait for extruder T0 temperature to stabilize",
"M133 T{tool} ; wait for extruder T{tool} temperature to stabilize",
"G130 X127 Y127 Z40 A127 B127 ; default stepper Vrefs now that extruder is hot",
"G92 A0 ; set extruder position value to 0 (no move)",
"G1 Z0.4 ; move nozzle just above the bed height",
@ -21,7 +21,7 @@
"G1 X{left+10} Y{bottom+10} Z0.15 F1200 ; slow wipe",
"G1 X{left+15} Y{bottom+15} Z0.5 F1200 ; lift",
"G92 A0 ; set extruder position value to 0 (no move)",
"M135 T0 ; set toolhead 0"
"M135 T{tool} ; set toolhead 0"
],
"post":[
"M127 ; stop filament cooling fan",

10
web/kiri/filter/FDM/Raise3D.N2
View file

@ -1,9 +1,9 @@
{
"pre":[
"M140 S{bed_temp}",
"M221 T0 S100.00",
"M104 T0 S{temp}",
"M109 T0 S{temp}",
"M221 T{tool} S100.00",
"M104 T{tool} S{temp}",
"M109 T{tool} S{temp}",
"M190 S{bed_temp}",
"G21",
"G90",
@ -11,7 +11,7 @@
"M107",
"G28 X0 Y0",
"G28 Z0",
"T0",
"T{tool}",
"G1 Z0.05 F6000.00",
"G92 E0",
"G1 F140 E29",
@ -26,7 +26,7 @@
"G1 Z10",
"G90",
"M1002",
"M104 T0 S0",
"M104 T{tool} S0",
"M104 S0",
"M140 S0",
"G1 X20 Y20 F6000",

6
web/kiri/filter/FDM/Ulio3D
View file

@ -1,6 +1,6 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -8,7 +8,7 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 X0 Y0 Z20 F180 ; move xy to 0,0 and z 20mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed",
@ -16,7 +16,7 @@
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T{tool} ; turn off right extruder",
"G1 Z{z_max} F180 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

11
web/kiri/filter/FDM/Ultimaker.Ultimaker2
View file

@ -1,7 +1,7 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -10,16 +10,15 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z205 F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

11
web/kiri/filter/FDM/Wanhao.Duplicator_4s
View file

@ -1,7 +1,7 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -10,16 +10,15 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

11
web/kiri/filter/FDM/Wanhao.Duplicator_5s
View file

@ -1,7 +1,7 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -10,16 +10,15 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

11
web/kiri/filter/FDM/Wanhao.Duplicator_6
View file

@ -1,7 +1,7 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -10,16 +10,15 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

11
web/kiri/filter/FDM/Wanhao.Duplicator_i3
View file

@ -1,7 +1,7 @@
{
"pre":[
"M104 S{temp} T0 ; set extruder temperature",
"M140 S{bed_temp} T0 ; set bed temperature",
"M104 S{temp} T{tool} ; set extruder temperature",
"M140 S{bed_temp} T{tool} ; set bed temperature",
"G90 ; set absolute positioning mode",
"M83 ; set relative positioning for extruder",
"M107 ; turn off filament cooling fan",
@ -10,16 +10,15 @@
"G92 X0 Y0 Z0 E0 ; reset all axes positions",
"G1 Z0.25 F180 ; move z to 0.25mm over bed",
"G92 E0 ; zero the extruded",
"M109 S{temp} T0 ; wait for extruder to reach target temp",
"M109 S{temp} T{tool} ; wait for extruder to reach target temp",
"G1 E15 F200 ; purge 15mm from extruder",
"G92 E0 ; zero the extruded",
"G1 F225 ; set feed speed"
],
"post":[
"M107 ; turn off filament cooling fan",
"M104 S0 T0 ; turn off right extruder",
"M104 S0 T1 ; turn off left extruder",
"M140 S0 T0 ; turn off bed",
"M104 S0 T{tool} ; turn off right extruder",
"M140 S0 T{tool} ; turn off bed",
"G1 Z{z_max} F1200 ; drop bed",
"G28 X0 Y0 ; home XY axes",
"M84 ; disable stepper motors"

2
web/kiri/filter/FDM/XYZ.daVinci.Jr.Pro
View file

@ -1,6 +1,6 @@
{
"pre":[
"T0 ; select extruder #0",
"T{tool} ; select extruder #0",
"M104 S{temp} ; set nozzle temp",
"M109 S{temp} ; wait for nozzle to heat",
"M82 ; absolute extrusion mode",

2
web/kiri/filter/FDM/XYZ.daVinci.Mini.w
View file

@ -1,6 +1,6 @@
{
"pre":[
"T0 ; select extruder #0",
"T{tool} ; select extruder #0",
"M104 S{temp} ; set nozzle temp",
"M109 S{temp} ; wait for nozzle to heat",
"G21 ; set units to millimeters",