A spline stored by fit points (DWG R2013+ scenario 2) has no control points
or knots, so the renderer — which built its curve from control points —
produced nothing and the spline was invisible. When a spline has fewer than
two control points but at least two fit points, interpolate a smooth
Catmull-Rom curve through the fit points and emit it as a dense polyline.
Open ends use reflected phantom points; closed/periodic splines wrap.
Pairs with the acadrust bump (e8e422a) that decodes the R2013+ fit-point
scenario correctly — together they make the fit-point spline in
Annotation-2D-Mesh-Solid-BIM.dwg render.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reclassify every property row to match standard palette behaviour: a row
is editable only when its value maps directly to a stored field AND its
apply_geom_prop handler is wired; computed/derived/count/handle/
cross-object values stay read-only.
Newly editable (all apply-wired): attribute tag/prompt; ellipse major
radius; hatch Double; lwpolyline closed/linetype-gen; mline style;
multileader annotative/landing/background-fill; polyline 2D+3D vertex
coords/segment widths/linetype-gen; shape style; spline control/fit
point coords, weight, fit tolerance, tangents; table break-option flags;
text alignment point, upside-down, backward; underlay display flags.
Corrections: spline Degree -> read-only (editing desynced the knot
vector); removed a duplicate leader "Arrowhead" row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bump acadrust to a46cb8b (spline knot parameterization + mtext line-space
style now stored) and populate rows the builders left blank:
Entity-local: spline Knot Parameterization + closed-spline Area (shoelace),
mtext Line space style, hatch Spacing (pattern-line offset), leader Text
offset (annotation offset), region Area + Perimeter (wire-loop approx).
Doc-dependent (resolved in app/properties.rs where the document is
reachable): insert Block Unit + Unit factor (block record units vs
INSUNITS), underlay Name + Path (definition object), leader Text style /
vertical placement / overall scale and tolerance Text style (dimension
style), multileader Max points + segment angles (mleader style).
Rows needing an annotation-scale / sheet-set subsystem or an internal
PDF/DWF layer parser are intentionally left blank.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Fit Tolerance and Start/End Tangent X/Y/Z rows were placeholders while
the pinned acadrust lacked those fields. Now that the bump exposes
Spline::fit_tolerance / begin_tangent / end_tangent, populate them.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rewrite each entity's property builder to the per-entity group/row spec:
the correct sections (Geometry, Misc, Text, Pattern, Lines & Arrows, Leaders,
Block, …) with the spec's rows and real computed values — Diameter,
Circumference, Area, Delta X/Y/Z, Angle, Total angle, Arc length, Radius ratio,
etc. — plus apply routing for the editable rows.
Covers ~26 entities (Line, Circle, Arc, Point, Ellipse, Spline, polylines,
Ray/XLine, Insert, Text, MText, Hatch, Leader, MultiLeader, Tolerance, Solid,
Solid3D/Region/Body, meshes, MLine, Raster/Wipeout, Underlay, Table, Viewport,
Attribute, OLE). The 3D Visualization/Material group and the full Dimension
spec are deferred (they need document access for material/dimstyle name
resolution). Rows whose data is not in the pinned acadrust revision are shown
as empty placeholders, to be filled when the dependency is bumped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Groundwork for making the Properties panel conform to the per-entity group/row
spec (PROPERTIES.md). The panel already renders a Vec of sections, but each
entity could only express a single geometry section.
Change PropertyEditable::geometry_properties (and the EntityTypeOps enum
dispatch) to return Vec<PropSection>, update the two impl macros, and flatten
in properties_sectioned so the panel shows [General] + the entity's groups.
Every entity builder is wrapped to return its existing section as a one-element
Vec — pure mechanical change, no rows or titles altered, panel output identical.
Enables Phase 2: rewriting each entity's groups/rows to match the spec.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grip markers drew visibly offset from the entity on large-coordinate
(UTM-scale) drawings: every Grippable impl cast the f64 entity coordinates
to f32 BEFORE the world-offset subtraction, and at 1e7 magnitude an f32
holds ~0.9 drawing units of rounding error. The wires subtract the offset
in f64 first (precision-preserving), so the grips landed up to ~1 unit
away from the geometry they belong to.
GripDef.world is now DVec3: producers fill it straight from the f64
entity data, refresh_selected_grips subtracts the world offset in f64,
and only the small offset-local result is cast to f32 for screen-space
projection (grips_to_screen / find_hit_grip) and drag state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every entity file ended with the same three-trait wrapper block:
impl Grippable for T {
fn grips(&self) -> Vec<GripDef> { grips(self) }
fn apply_grip(&mut self, ...) { apply_grip(self, ...) }
}
impl PropertyEditable for T { ... }
impl Transformable for T { ... }
— 23 lines of pure delegation around five same-named free functions.
Replace with `crate::impl_entity_basics!(T);` (a macro in
entities/traits.rs that expands to the three trait impls).
Applied where the file already follows the free-fn delegation
convention (Arc, Circle, Ellipse, Insert, Leader, Line, LwPolyline,
MultiLeader, Ole2Frame, Point, Spline, Viewport). Files that inlined
the trait method bodies directly (Ray, XLine, Shape, Solid, Tolerance,
MLine, Mesh, Solid3D/Region/Body, Table, RasterImage, Wipeout,
Underlay, Hatch, Polyline, Polyline2D, Polyline3D, Dimension) left
alone — they already skip the indirection. Text/MText/Attribute use
the with-text-style flavour and will move once that variant is needed
beyond the existing two manual impls.
A second macro `impl_entity_basics_with_text_styles!` is included for
the text-like flavour but no entity uses it yet.
Net: -204 lines.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Entity converters were casting WCS coordinates to f32 before the renderer
subtracted world_offset, which destroyed sub-unit precision on drawings
sitting at large coordinates (typical UTM-style CAD files). The multileader
case made it visible — glyphs warped under rotation — but every entity
that emits TruckObject::Lines/SegmentedLines/key_vertices/fill_tris was
affected.
Type changes (in src/scene/acad_to_truck.rs):
- TruckObject::Lines / SegmentedLines: Vec<[f32; 3]> → Vec<[f64; 3]>
- TruckEntity::key_vertices / fill_tris: f32 → f64
All ~17 producer files updated to keep WCS coordinates in f64 right up to
the TruckEntity boundary. The consumer in scene/tessellate.rs now performs
`(x - ox) as f32` (f64 subtract, then cast) for points, key_vertices, and
fill_tris — preserving precision near the camera origin even when the
drawing sits at million-unit coordinates.
catmull_rom_pts (multileader spline) is now f64; the scene path widens its
offset-relative f32 ctrl points to f64 around the call and narrows back at
the output.
Notes:
- Table layout still uses glam::Vec3 (f32) internally; widened to f64 only
at the TruckEntity boundary for type compatibility. Separate cleanup to
switch its internal math to f64 is tracked.
- snap_pts and tangent_geoms remain f32 — they are UI feedback (snap
candidates, tangent hints) and the precision is sufficient there.
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Splines backed by rational NURBS (circles, conics) were tessellated as
uniform B-splines, losing the weighting that defines the curve shape.
Now BSplineCurve<Point3> is used only when weights are absent or empty;
when weight data is present a NurbsCurve<Vector4> is built from the
homogeneous control points so circles and conics render accurately.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Spline: if flags.closed/periodic and B-spline endpoints don't meet,
add an explicit closing Wire segment to eliminate the visual gap.
- Hatch BoundaryEdge::Spline: evaluate the B-spline at 16 uniform
parameter samples (de Boor via truck BSplineCurve) instead of
plotting raw control points as a polyline; falls back to control-
point polyline for degenerate knot/degree inputs.
- Ellipse arc key_vertices and LWPolyline midpoint grips committed
separately; this commit wraps the spline-related fixes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Spline entities now expose fit_points (or control_points when no fit
points are defined) as key_vertices, enabling Endpoint and Midpoint
snap to reach spline construction points.
TextStyle is_backward flag is applied by negating the width_factor,
producing horizontally mirrored text. is_upside_down rotates the text
180°. Both tessellate_text_ex and text_local_bounds now handle negative
width_factor without clamping it to zero.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Empty LwPolyline and single-control-point Spline fallbacks were calling
builder::line(&v, &v) with the same Rc vertex, triggering the
truck-topology panic "Two same vertices cannot construct an edge."
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
