feat: Grid snap adaptive spacing + Polar tracking improvements

Grid snap (F9):
  • snap spacing now tracks the visible grid zoom level — computed via
    compute_grid_step() (same adaptive pow-of-5 logic as draw_grid),
    updated on every ViewportMove so zooming in/out keeps snap aligned
    with the grid lines on screen

Polar tracking (F10):
  • configurable angle increment stored in polar_increment_deg (default 45°)
  • right-click the POLAR pill to cycle through 15 → 30 → 45 → 90°
  • pill label shows current angle ("POLAR 45°")
  • visual guide line: while drawing with polar on, a dashed cyan line is
    drawn from last_point along the snapped direction across the viewport
  • SetPolarAngle message + handler; all polar_constrain() calls use the
    stored increment instead of the hardcoded 45°

ROADMAP updated: Grid snap and Polar tracking marked ✅.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

ROADMAP.md

@@ -207,8 +207,8 @@ Underlay (PDF/DWF/DGN)
 |---------|-------|
 | Endpoint / Midpoint / Center / Quadrant / Intersection | ✅ |
 | Perpendicular / Tangent / Nearest | ✅ |
-| Grid snap | ⬜ |
+| Grid snap | ✅ Zoom-adaptive spacing |
-| Polar tracking | ⬜ |
+| Polar tracking | ✅ Configurable angle, guide line |
 | Object snap tracking | ⬜ |
 
 ---
@@ -239,7 +239,7 @@ Underlay (PDF/DWF/DGN)
 | MVIEW (viewport oluşturma) | ✅ |
 | Per-viewport layer visibility | ✅ |
 | Plot ayarları (PlotSettings) | ✅ |
-| Çoklu named layout sekmeleri | ⬜ |
+| Çoklu named layout sekmeleri | ✅ |
 | VPLAYER — viewport katman override | 🔧 Altyapı var |
 | Layout Manager arayüzü | ⬜ |
 
@@ -302,15 +302,11 @@ Underlay (PDF/DWF/DGN)
 ## Öncelik Sırası (Bir Sonraki Adımlar)
 
 ### Yüksek Öncelik
-1. **Çoklu Layout sekmeleri** arayüzü
+1. **XREF yönetimi**
 
 ### Orta Öncelik
-5. **Grid snap + Polar tracking**
+5. **MASSPROP / DATAEXTRACTION**
-6. **XREF yönetimi**
 
 ### Düşük Öncelik
-11. Grid snap + Polar tracking
+11. Fiziksel yazıcıya yazdırma
-12. XREF yönetimi
+12. Boolean 3D operasyonlar
-13. MASSPROP / DATAEXTRACTION
-14. Fiziksel yazıcıya yazdırma
-15. Boolean 3D operasyonlar

src/app/mod.rs

@@ -43,8 +43,10 @@ pub(super) struct H7CAD {
     pre_cmd_tangent: Option<bool>,
     /// Orthogonal drawing constraint (F8): constrains picks to 0°/90°/180°/270°.
     ortho_mode: bool,
-    /// Polar tracking (F10): constrains picks to 45° angle increments.
+    /// Polar tracking (F10): constrains picks to configurable angle increments.
     polar_mode: bool,
+    /// Polar tracking angle increment in degrees (15 / 30 / 45 / 90).
+    polar_increment_deg: f32,
     /// Show grid lines in the viewport (F7).
     show_grid: bool,
     /// Show the UCS icon in the bottom-left corner of model space (UCSICON).
@@ -224,8 +226,10 @@ pub enum Message {
     ToggleGrid,
     /// Toggle orthogonal drawing constraint — F8 / ORTHO status-bar button.
     ToggleOrtho,
-    /// Toggle polar-angle constraint (45° increments) — F10 / POLAR status-bar button.
+    /// Toggle polar-angle constraint — F10 / POLAR status-bar button.
     TogglePolar,
+    /// Set polar tracking angle increment (right-click POLAR button).
+    SetPolarAngle(f32),
     /// Toggle an individual snap mode (from popup row click).
     ToggleSnap(crate::snap::SnapType),
     /// Open / close the OSNAP popup (▾ arrow click).
@@ -429,6 +433,7 @@ impl H7CAD {
             pre_cmd_tangent: None,
             ortho_mode: false,
             polar_mode: false,
+            polar_increment_deg: 45.0,
             show_grid: false,
             show_ucs_icon: true,
             last_point: None,

src/app/update.rs

@@ -814,7 +814,7 @@ impl H7CAD {
                         if self.ortho_mode {
                             snapped = ortho_constrain(snapped, base);
                         } else if self.polar_mode {
-                            snapped = polar_constrain(snapped, base, 45.0);
+                            snapped = polar_constrain(snapped, base, self.polar_increment_deg);
                         }
                     }
 
@@ -846,6 +846,9 @@ impl H7CAD {
                             .pick_on_target_plane(p, bounds)
                     };
                     let view_proj = self.tabs[i].scene.camera.borrow().view_proj(bounds);
+                    // Sync grid-snap spacing to the adaptive spacing of the visible grid.
+                    self.snapper.grid_spacing =
+                        crate::ui::overlay::compute_grid_step(view_proj, bounds);
                     // In MSPACE, map paper-space cursor to model space so that
                     // command previews and snapping work in the correct coordinate space.
                     let cursor_world = self.tabs[i].scene.paper_to_model(cursor_paper);
@@ -879,14 +882,14 @@ impl H7CAD {
                             if self.ortho_mode {
                                 pt = ortho_constrain(pt, base);
                             } else if self.polar_mode {
-                                pt = polar_constrain(pt, base, 45.0);
+                                pt = polar_constrain(pt, base, self.polar_increment_deg);
                             }
                         }
                         pt
                     };
                     self.tabs[i].last_cursor_world = effective;
 
-                    let previews = if needs_entity {
+                    let mut previews = if needs_entity {
                         let hover_handle =
                             scene::hit_test::click_hit(p, &all_wires, view_proj, bounds)
                                 .and_then(|s| Scene::handle_from_wire_name(s))
@@ -899,6 +902,37 @@ impl H7CAD {
                             .map(|c| c.on_preview_wires(effective))
                             .unwrap_or_default()
                     };
+                    // Polar tracking guide line: dotted line from last_point along
+                    // the snapped angle direction, extending across the drawing.
+                    if self.polar_mode && !needs_entity {
+                        if let Some(base) = self.last_point {
+                            let dx = effective.x - base.x;
+                            let dy = effective.y - base.y;
+                            if (dx * dx + dy * dy).sqrt() > 1e-4 {
+                                let far = 1e5_f32;
+                                let dir = glam::Vec3::new(dx, dy, 0.0).normalize();
+                                let far_pos = base + dir * far;
+                                let far_neg = base - dir * far;
+                                let guide = crate::scene::WireModel {
+                                    name: "__polar_guide__".into(),
+                                    points: vec![
+                                        [far_neg.x, far_neg.y, far_neg.z],
+                                        [far_pos.x, far_pos.y, far_pos.z],
+                                    ],
+                                    color: [0.2, 0.7, 0.9, 0.6],
+                                    selected: false,
+                                    aci: 0,
+                                    pattern_length: 0.8,
+                                    pattern: [0.5, -0.3, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0],
+                                    line_weight_px: 1.0,
+                                    snap_pts: vec![],
+                                    tangent_geoms: vec![],
+                                    key_vertices: vec![],
+                                };
+                                previews.push(guide);
+                            }
+                        }
+                    }
                     self.tabs[i].scene.set_preview_wires(previews);
                 } else {
                     self.tabs[i].snap_result = None;
@@ -1046,7 +1080,7 @@ impl H7CAD {
                             if self.ortho_mode {
                                 pt = ortho_constrain(pt, base);
                             } else if self.polar_mode {
-                                pt = polar_constrain(pt, base, 45.0);
+                                pt = polar_constrain(pt, base, self.polar_increment_deg);
                             }
                         }
                         pt
@@ -1481,6 +1515,12 @@ impl H7CAD {
                 if self.polar_mode { self.ortho_mode = false; }
                 Task::none()
             }
+            Message::SetPolarAngle(deg) => {
+                self.polar_increment_deg = deg;
+                self.polar_mode = true;
+                self.ortho_mode = false;
+                Task::none()
+            }
             Message::ToggleSnap(t) => { self.snapper.toggle(t); Task::none() }
             Message::ToggleSnapPopup => { self.snap_popup_open ^= true; Task::none() }
             Message::CloseSnapPopup => { self.snap_popup_open = false; Task::none() }

src/app/view.rs

@@ -177,6 +177,7 @@ impl H7CAD {
                     self.snap_popup_open,
                     self.ortho_mode,
                     self.polar_mode,
+                    self.polar_increment_deg,
                     self.show_grid,
                     tab.scene.layout_names(),
                     tab.scene.current_layout.clone(),

src/ui/overlay.rs

@@ -146,6 +146,40 @@ pub struct GridParams {
     pub plane: GridPlane,
 }
 
+/// Compute the adaptive grid step size (world units) that the grid renderer
+/// would use for a given view-projection matrix and viewport bounds.
+///
+/// Returns the smallest power-of-5 multiple of 1.0 that places grid lines at
+/// least `MIN_GRID_PX` pixels apart.  This matches exactly what `draw_grid`
+/// renders, so callers can sync snap spacing to the visible grid.
+pub fn compute_grid_step(vp: Mat4, bounds: iced::Rectangle) -> f32 {
+    use glam::Vec3;
+    let w2s = |world: Vec3| {
+        let ndc = vp.project_point3(world);
+        glam::Vec2::new(
+            (ndc.x + 1.0) * 0.5 * bounds.width,
+            (1.0 - ndc.y) * 0.5 * bounds.height,
+        )
+    };
+    let o = w2s(Vec3::ZERO);
+    let a1 = w2s(Vec3::X);
+    let a2 = w2s(Vec3::Y);
+    let d1 = (a1 - o).length();
+    let d2 = (a2 - o).length();
+    let px_per_unit = d1.max(d2);
+    if px_per_unit < 1e-6 {
+        return 1.0;
+    }
+    let mut s = 1.0_f32;
+    while s * px_per_unit < MIN_GRID_PX {
+        s *= 5.0;
+        if s > 1e9 {
+            return 1.0;
+        }
+    }
+    s
+}
+
 /// Parameters for the screen-space UCS icon drawn in the viewport corner.
 pub struct UcsIconParams {
     /// View-projection matrix used to project world axis directions to screen.

src/ui/statusbar.rs

@@ -26,6 +26,7 @@ impl StatusBar {
         popup_open: bool,
         ortho_mode: bool,
         polar_mode: bool,
+        polar_increment_deg: f32,
         show_grid: bool,
         layouts: Vec<String>,
         current_layout: String,
@@ -80,10 +81,7 @@ impl StatusBar {
                 toggle_pill("ORTHO", ortho_mode, Message::ToggleOrtho),
                 "Orthogonal Mode\nF8"
             ),
-            tip(
+            polar_pill(polar_mode, polar_increment_deg),
-                toggle_pill("POLAR", polar_mode, Message::TogglePolar),
-                "Polar Tracking (45°)\nF10"
-            ),
             osnap_btn(osnap_active, snapper.snap_enabled, popup_open),
             status_pill(space_label),
             status_pill(scale_label),
@@ -192,6 +190,76 @@ fn toggle_pill(label: &'static str, active: bool, msg: Message) -> Element<'stat
     .into()
 }
 
+// ── Polar tracking pill ───────────────────────────────────────────────────
+//
+// Left-click toggles polar on/off.
+// Right-click cycles through common angle increments: 15 → 30 → 45 → 90 → 15 …
+
+fn polar_pill(active: bool, increment_deg: f32) -> Element<'static, Message> {
+    let label = format!("POLAR {:.0}°", increment_deg);
+    let tooltip_text = format!(
+        "Polar Tracking ({}°)\nF10 — left-click on/off\nRight-click to change angle",
+        increment_deg as u32
+    );
+
+    let bg_color = move |hovered: bool| {
+        match (active, hovered) {
+            (true, true) => SNAP_ON_HOVER,
+            (true, false) => SNAP_ON_BG,
+            (false, true) => SNAP_OFF_HOVER,
+            (false, false) => SNAP_OFF_BG,
+        }
+    };
+
+    // Cycle to the next common angle on right-click.
+    let next_angle = match increment_deg as u32 {
+        15 => 30.0_f32,
+        30 => 45.0,
+        45 => 90.0,
+        _ => 15.0,
+    };
+
+    let inner = container(
+        text(label).size(10).color(if active { OSNAP_ON_TEXT } else { OSNAP_OFF_TEXT })
+    )
+    .style(move |_: &Theme| container::Style {
+        background: Some(Background::Color(bg_color(false))),
+        border: Border {
+            color: if active { SNAP_BORDER_ON } else { BORDER_COLOR },
+            width: 1.0,
+            radius: 2.0.into(),
+        },
+        ..Default::default()
+    })
+    .padding([2, 6]);
+
+    let pill = mouse_area(inner)
+        .on_press(Message::TogglePolar)
+        .on_right_press(Message::SetPolarAngle(next_angle));
+
+    tooltip(
+        pill,
+        container(text(tooltip_text).size(11).color(Color::WHITE))
+            .style(|_: &Theme| container::Style {
+                background: Some(Background::Color(Color {
+                    r: 0.13,
+                    g: 0.13,
+                    b: 0.13,
+                    a: 0.95,
+                })),
+                border: Border {
+                    color: Color { r: 0.35, g: 0.35, b: 0.35, a: 1.0 },
+                    width: 1.0,
+                    radius: 3.0.into(),
+                },
+                ..Default::default()
+            })
+            .padding([4, 8]),
+        TipPos::Top,
+    )
+    .into()
+}
+
 // ── OSNAP split button ────────────────────────────────────────────────────
 //
 // Left part  ("⚡ OSNAP"): toggles the global snap on/off.