fix(dyn-input): correct Y coordinate, label by prompt type — #27

DYN overlay artık ekran-yukarı için world Y'yi (w.y) gösteriyor; eskiden
w.z kullanıldığı için Z-up sahnede top/3D görünümde Y hep 0 görünüyordu
(#27).

Ayrıca overlay etiketi aktif komutun o anki sorusuna göre biçimleniyor:
yeni DynField (Point / Distance / Angle) trait metodu eklendi. CIRCLE
yarıçap adımında 'd=...', ROTATE açı adımında '<...°', diğer nokta
adımlarında koordinat / polar (d + açı) gösteriliyor.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

src/app/view.rs

@@ -2,6 +2,7 @@ use super::document::DocumentTab;
 use super::helpers::grid_plane_from_camera;
 use super::history::history_dropdown_labels;
 use super::{Message, OpenCADStudio};
+use crate::command::DynField;
 use crate::scene::grip::{grips_to_screen, grips_to_screen_paper};
 use crate::scene::paper_canvas::PaperCanvas;
 use crate::scene::viewport_pane::{PaperViewportPane, ViewportPane};
@@ -463,18 +464,40 @@ impl OpenCADStudio {
         };
 
         // Dynamic input overlay — shown when a command is active and DYN is on.
+        // The label adapts to what the command is currently asking for:
+        // a point shows coordinates (or polar distance+angle once a base
+        // point exists); a radius/length prompt shows a single distance;
+        // an angle prompt shows degrees.
         let dyn_input_overlay: Option<Element<'_, Message>> =
             if self.dyn_input && tab.active_cmd.is_some() {
                 let w = tab.last_cursor_world;
-                let label = if let Some(base) = self.last_point {
+                let field = tab
-                    // Show relative distance + angle when we have a base point.
+                    .active_cmd
-                    let dx = (w.x - base.x) as f64;
+                    .as_ref()
-                    let dy = (w.z - base.z) as f64;
+                    .map(|c| c.dyn_field())
-                    let dist = (dx * dx + dy * dy).sqrt();
+                    .unwrap_or(DynField::Point);
-                    let ang = dy.atan2(dx).to_degrees();
+                // World is Z-up: the drawing plane is X/Y, so screen "up"
-                    format!("d={:.3}  <{:.1}°", dist, ang)
+                // maps to world Y — use w.y, not w.z (issue #27).
-                } else {
+                let label = match (field, self.last_point) {
-                    format!("X:{:.3}  Y:{:.3}", w.x, w.z)
+                    (DynField::Distance, Some(base)) => {
+                        let dx = (w.x - base.x) as f64;
+                        let dy = (w.y - base.y) as f64;
+                        format!("d={:.3}", (dx * dx + dy * dy).sqrt())
+                    }
+                    (DynField::Angle, Some(base)) => {
+                        let dx = (w.x - base.x) as f64;
+                        let dy = (w.y - base.y) as f64;
+                        format!("<{:.1}°", dy.atan2(dx).to_degrees().rem_euclid(360.0))
+                    }
+                    (_, Some(base)) => {
+                        // Point with a base: polar distance + angle.
+                        let dx = (w.x - base.x) as f64;
+                        let dy = (w.y - base.y) as f64;
+                        let dist = (dx * dx + dy * dy).sqrt();
+                        let ang = dy.atan2(dx).to_degrees().rem_euclid(360.0);
+                        format!("d={:.3}  <{:.1}°", dist, ang)
+                    }
+                    (_, None) => format!("X:{:.3}  Y:{:.3}", w.x, w.y),
                 };
                 Some(overlay::dynamic_input_overlay(
                     tab.last_cursor_screen,

src/command/mod.rs

@@ -179,6 +179,23 @@ pub enum CmdResult {
     AttreqNeeded { block_name: String },
 }
 
+/// What kind of value the active command is currently asking for. Drives
+/// the dynamic-input overlay so the tooltip shows the relevant quantity
+/// (coordinates for a point pick, a single length for a radius/distance
+/// prompt, degrees for an angle prompt).
+#[derive(Clone, Copy, PartialEq, Eq, Debug, Default)]
+pub enum DynField {
+    /// A position — X/Y coordinates (or distance+angle relative to the
+    /// last point). The default for every command step.
+    #[default]
+    Point,
+    /// A single linear distance (radius, length, offset) measured from
+    /// the last point.
+    Distance,
+    /// An angle, shown in degrees, measured from the last point.
+    Angle,
+}
+
 // ── Trait ─────────────────────────────────────────────────────────────────
 
 /// An interactive CAD command that collects user input step-by-step.
@@ -316,6 +333,14 @@ pub trait CadCommand: Send {
     /// that need to read/modify it (e.g. DIMTEDIT, MLEADERADD, MLEADERREMOVE).
     /// Default: no-op.
     fn inject_picked_entity(&mut self, _entity: acadrust::EntityType) {}
+
+    /// What the command is asking for at this step, used to label the
+    /// dynamic-input overlay. Default is a point pick; commands waiting
+    /// on a radius/length return `Distance` and angle prompts return
+    /// `Angle`.
+    fn dyn_field(&self) -> DynField {
+        DynField::Point
+    }
 }
 
 // ── Autocomplete registry ─────────────────────────────────────────────────

src/modules/home/draw/circle.rs

@@ -11,7 +11,7 @@
 use acadrust::types::Vector3;
 use acadrust::{Circle, EntityType};
 
-use crate::command::{CadCommand, CmdResult, TangentObject};
+use crate::command::{CadCommand, CmdResult, DynField, TangentObject};
 use crate::modules::home::defaults;
 use crate::modules::IconKind;
 use crate::scene::wire_model::WireModel;
@@ -183,6 +183,12 @@ impl CadCommand for CircleCommand {
         }
         None
     }
+    fn dyn_field(&self) -> DynField {
+        match self.step {
+            StepCR::Center => DynField::Point,
+            StepCR::Radius(_) => DynField::Distance,
+        }
+    }
 }
 
 // ── Command: Center, Diameter ──────────────────────────────────────────────

src/modules/home/modify/rotate.rs

@@ -9,7 +9,7 @@
 use acadrust::Handle;
 use glam::Vec3;
 
-use crate::command::{CadCommand, CmdResult, EntityTransform};
+use crate::command::{CadCommand, CmdResult, DynField, EntityTransform};
 use crate::modules::home::defaults;
 use crate::modules::{IconKind, ModuleEvent, ToolDef};
 use crate::scene::wire_model::WireModel;
@@ -187,4 +187,11 @@ impl CadCommand for RotateCommand {
         ));
         out
     }
+
+    fn dyn_field(&self) -> DynField {
+        match self.step {
+            Step::Angle { .. } => DynField::Angle,
+            _ => DynField::Point,
+        }
+    }
 }